arm64: dts: rockchip: add LED_FUNCTION_STATUS for RGB LEDs on Radxa E25
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: add LED_FUNCTION_STATUS for RGB LEDs on Radxa E25
multicolor(RGB) PWM LEDs on Radxa E25 carrier board is clearly defined as status LED ("use it to see the status") in product overview[1].
add "function = LED_FUNCTION_STATUS" to "multi-led".
fortunately CONFIG_LEDS_PWM_MULTICOLOR is not enabled in defconfig, this change should not affect userland(sysfs).
[1] https://radxa.com/products/network-computer/e25#overview
--- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +1 -0
@@ -16,6 +16,7 @@ pwm-leds { multi-led { color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; max-brightness = <255>; led-red {
Signature · 7 lines
2.43.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 9 lines · FUKAUMI Naoki
multicolor(RGB) PWM LEDs on Radxa E25 carrier board is clearly defined as status LED ("use it to see the status") in product overview[1].
add "function =
LED_FUNCTION_STATUS" to "multi-led".fortunately
CONFIG_LEDS_PWM_MULTICOLORis not enabled in defconfig, this change should not affect userland(sysfs).[...]
Applied, thanks!
[1/1] arm64: dts: rockchip: add LED_FUNCTION_STATUS for RGB LEDs on Radxa E25
commit: 40c60d826f4541668d81d8ee561dced5d4950223
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>