cxl/port: Use __free() to drop put_device() for cxl_port
PATCH v2 1/3 cxl/port: Use __free() to drop put_device() for cxl_port
Using scope-based resource management __free() marco with a new helper called put_cxl_port() to drop open coded the put_device() used to dereference the 'struct device' in cxl_port.
---
v2:
- Use guard() instead of scoped_guard() in some cases.
- Ira: Check the return value of find_cxl_port_at().
Link to v1: https://lore.kernel.org/linux-cxl/[email protected]/T/#m07695675435bf702311dfc40f64289b9623afa16
--- drivers/cxl/core/pci.c | 6 ++---- drivers/cxl/core/port.c | 26 +++++++++----------------- drivers/cxl/cxl.h | 1 + drivers/cxl/mem.c | 5 ++--- drivers/cxl/pci.c | 7 ++----- 5 files changed, 16 insertions(+), 29 deletions(-)
drivers/cxl/core/pci.c +2 -4
@@ -915,15 +915,13 @@ static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds)struct pci_dev *pdev =to_pci_dev (cxlds->dev);struct aer_capability_regs aer_regs;struct cxl_dport *dport; -struct cxl_port *port;int severity; - port =cxl_pci_find_port (pdev, &dport); + struct cxl_port *port __free(put_cxl_port) = +cxl_pci_find_port (pdev, &dport);if (!port)return ; -put_device (&port->dev); -if (!cxl_rch_get_aer_info (dport->regs.dport_aer, &aer_regs))return ;
drivers/cxl/core/port.c +9 -17
@@ -1477,12 +1477,11 @@ static void cxl_detach_ep(void *data) .cxlmd = cxlmd, .depth = i, }; -struct device *dev;struct cxl_ep *ep;bool died = false; - dev =bus_find_device (&cxl_bus_type,NULL , &ctx, - port_has_memdev); + struct device *dev __free(put_device) = +bus_find_device (&cxl_bus_type,NULL , &ctx, port_has_memdev);if (!dev)continue ; port =to_cxl_port (dev);
@@ -1512,7 +1511,6 @@ static void cxl_detach_ep(void *data) dev_name(&port->dev));delete_switch_port (port); } -put_device (&port->dev);device_unlock (&parent_port->dev); } }
@@ -1539,8 +1537,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,struct device *uport_dev, struct device *dport_dev) { + struct cxl_port *port __free(put_cxl_port) = NULL;struct device *dparent =grandparent (dport_dev); -struct cxl_port *port, *parent_port =NULL ;struct cxl_dport *dport, *parent_dport;resource_size_t component_reg_phys;int rc;
@@ -1556,7 +1554,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return -ENXIO ; } - parent_port =find_cxl_port (dparent, &parent_dport); + struct cxl_port *parent_port __free(put_cxl_port) = +find_cxl_port (dparent, &parent_dport);if (!parent_port) {/* iterate to create this parent_port */ return -EAGAIN ;
@@ -1596,10 +1595,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,*/ rc = -ENXIO ; } -put_device (&port->dev); } -put_device (&parent_port->dev);return rc; }
@@ -1630,7 +1627,6 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)struct device *dport_dev =grandparent (iter);struct device *uport_dev;struct cxl_dport *dport; -struct cxl_port *port;/* * The terminal "grandparent" in PCI is NULL and @platform_bus
@@ -1649,7 +1645,8 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)dev_dbg (dev,"scan: iter: %s dport_dev: %s parent: %s\n" ,dev_name (iter),dev_name (dport_dev),dev_name (uport_dev)); - port =find_cxl_port (dport_dev, &dport); + struct cxl_port *port __free(put_cxl_port) = +find_cxl_port (dport_dev, &dport);if (port) { dev_dbg(&cxlmd->dev, "found already registered port %s:%s\n",
@@ -1664,18 +1661,13 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)* the parent_port lock as the current port may be being * reaped. */ -if (rc && rc != -EBUSY ) { -put_device (&port->dev); +if (rc && rc != -EBUSY )return rc; - }/* Any more ports to add between this one and the root? */ -if (!dev_is_cxl_root_child (&port->dev)) { -put_device (&port->dev); +if (!dev_is_cxl_root_child (&port->dev))continue ; - } -put_device (&port->dev);return 0 ; }
drivers/cxl/cxl.h +1 -0
@@ -744,6 +744,7 @@ struct cxl_root *find_cxl_root(struct cxl_port *port);void put_cxl_root (struct cxl_root *cxl_root); DEFINE_FREE(put_cxl_root, struct cxl_root *, if (_T) put_cxl_root(_T)) +DEFINE_FREE(put_cxl_port, struct cxl_port *, if (!IS_ERR_OR_NULL(_T)) put_device(&_T->dev))int devm_cxl_enumerate_ports (struct cxl_memdev *cxlmd);void cxl_bus_rescan (void );void cxl_bus_drain (void );
drivers/cxl/mem.c +2 -3
@@ -109,7 +109,6 @@ static int cxl_mem_probe(struct device *dev)struct cxl_memdev_state *mds =to_cxl_memdev_state (cxlmd->cxlds);struct cxl_dev_state *cxlds = cxlmd->cxlds;struct device *endpoint_parent; -struct cxl_port *parent_port;struct cxl_dport *dport;struct dentry *dentry;int rc;
@@ -146,7 +145,8 @@ static int cxl_mem_probe(struct device *dev)if (rc)return rc; - parent_port =cxl_mem_find_port (cxlmd, &dport); + struct cxl_port *parent_port __free(put_cxl_port) = +cxl_mem_find_port (cxlmd, &dport);if (!parent_port) {dev_err (dev,"CXL port topology not found\n" );return -ENXIO ;
@@ -179,7 +179,6 @@ static int cxl_mem_probe(struct device *dev) rc =devm_cxl_add_endpoint (endpoint_parent, cxlmd, dport); unlock:device_unlock (endpoint_parent); -put_device (&parent_port->dev);if (rc)return rc;
drivers/cxl/pci.c +2 -5
@@ -473,7 +473,6 @@ static bool is_cxl_restricted(struct pci_dev *pdev)static int cxl_rcrb_get_comp_regs (struct pci_dev *pdev,struct cxl_register_map *map) { -struct cxl_port *port;struct cxl_dport *dport;resource_size_t component_reg_phys;
@@ -482,14 +481,12 @@ static int cxl_rcrb_get_comp_regs(struct pci_dev *pdev, .resource = CXL_RESOURCE_NONE, }; - port =cxl_pci_find_port (pdev, &dport); + struct cxl_port *port __free(put_cxl_port) = +cxl_pci_find_port (pdev, &dport);if (!port)return -EPROBE_DEFER ; component_reg_phys =cxl_rcd_component_reg_phys (&pdev->dev, dport); - -put_device (&port->dev); -if (component_reg_phys ==CXL_RESOURCE_NONE )return -ENXIO ;
Signature · 1 line
2.40.1
PATCH v2 2/3 cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
A device_lock() and device_unlock() pair can be replaced by a cleanup helper scoped_guard() or guard(), that can enhance code readability. In CXL subsystem, still use device_lock() and device_unlock() pairs for cxl port resource protection, most of them can be replaced by a scoped_guard() or a guard() simply.
--- drivers/cxl/core/mbox.c | 3 +- drivers/cxl/core/port.c | 93 +++++++++++++++++---------------------- drivers/cxl/core/region.c | 25 ++++++----- drivers/cxl/mem.c | 22 +++++---- drivers/cxl/pmem.c | 16 +++---- 5 files changed, 72 insertions(+), 87 deletions(-)
drivers/cxl/core/mbox.c +1 -2
@@ -1214,7 +1214,7 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)int rc;/* synchronize with cxl_mem_probe() and decoder write operations */ -device_lock (&cxlmd->dev); +guard (device)(&cxlmd->dev); endpoint = cxlmd->endpoint;down_read (&cxl_region_rwsem);/*
@@ -1226,7 +1226,6 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)else rc = -EBUSY ;up_read (&cxl_region_rwsem); -device_unlock (&cxlmd->dev);return rc; }
drivers/cxl/core/port.c +41 -52
131 lines not on this page · raw message
drivers/cxl/core/region.c +13 -12
@@ -3094,11 +3094,11 @@ static void cxlr_release_nvdimm(void *_cxlr)struct cxl_region *cxlr = _cxlr;struct cxl_nvdimm_bridge *cxl_nvb = cxlr->cxl_nvb; -device_lock (&cxl_nvb->dev); -if (cxlr->cxlr_pmem) -devm_release_action (&cxl_nvb->dev, cxlr_pmem_unregister, - cxlr->cxlr_pmem); -device_unlock (&cxl_nvb->dev); + scoped_guard(device, &cxl_nvb->dev) { +if (cxlr->cxlr_pmem) +devm_release_action (&cxl_nvb->dev, cxlr_pmem_unregister, + cxlr->cxlr_pmem); + } cxlr->cxl_nvb =NULL ;put_device (&cxl_nvb->dev); }
@@ -3134,13 +3134,14 @@ static int devm_cxl_add_pmem_region(struct cxl_region *cxlr)dev_dbg (&cxlr->dev,"%s: register %s\n" ,dev_name (dev->parent),dev_name (dev)); -device_lock (&cxl_nvb->dev); -if (cxl_nvb->dev.driver) - rc =devm_add_action_or_reset (&cxl_nvb->dev, - cxlr_pmem_unregister, cxlr_pmem); -else - rc = -ENXIO ; -device_unlock (&cxl_nvb->dev); + scoped_guard(device, &cxl_nvb->dev) { +if (cxl_nvb->dev.driver) + rc =devm_add_action_or_reset (&cxl_nvb->dev, + cxlr_pmem_unregister, + cxlr_pmem); +else + rc = -ENXIO ; + }if (rc) goto err_bridge;
drivers/cxl/mem.c +10 -12
@@ -168,19 +168,17 @@ static int cxl_mem_probe(struct device *dev)cxl_setup_parent_dport (dev, dport); -device_lock (endpoint_parent); -if (!endpoint_parent->driver) { -dev_err (dev,"CXL port topology %s not enabled\n" , -dev_name (endpoint_parent)); - rc = -ENXIO ; - goto unlock; - } + scoped_guard(device, endpoint_parent) { +if (!endpoint_parent->driver) { +dev_err (dev,"CXL port topology %s not enabled\n" , +dev_name (endpoint_parent)); +return -ENXIO ; + } - rc =devm_cxl_add_endpoint (endpoint_parent, cxlmd, dport); -unlock: -device_unlock (endpoint_parent); -if (rc) -return rc; + rc =devm_cxl_add_endpoint (endpoint_parent, cxlmd, dport); +if (rc) +return rc; + }/* * The kernel may be operating out of CXL memory on this device,
drivers/cxl/pmem.c +7 -9
@@ -233,15 +233,13 @@ static int detach_nvdimm(struct device *dev, void *data)if (!is_cxl_nvdimm (dev))return 0 ; -device_lock (dev); -if (!dev->driver) - goto out; - - cxl_nvd =to_cxl_nvdimm (dev); -if (cxl_nvd->cxlmd && cxl_nvd->cxlmd->cxl_nvb == data) - release = true; -out: -device_unlock (dev); + scoped_guard(device, dev) { +if (dev->driver) { + cxl_nvd =to_cxl_nvdimm (dev); +if (cxl_nvd->cxlmd && cxl_nvd->cxlmd->cxl_nvb == data) + release = true; + } + }if (release)device_release_driver (dev);return 0 ;
Signature · 1 line
2.40.1
PATCH v2 3/3 cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
In reply to Li MingThe "goto error" pattern is not recommended, it can be removed via refactoring. In __devm_cxl_add_port(), there is a 'goto' to call put_device() for the error cases between device_initialize() and device_add() to dereference the 'struct device' of a new cxl_port. The refactoring is introducing a new function called cxl_port_add() which is used to add the 'struct device' of a new cxl_port to device hierarchy, moving the functions needing the help of above 'goto' into cxl_port_add(), and using a scope-based resource management __free() to drop the open coded put_device() and 'goto' for the error cases.
--- drivers/cxl/core/port.c | 59 ++++++++++++++++++++++++----------------- 1 file changed, 35 insertions(+), 24 deletions(-)
drivers/cxl/core/port.c +35 -24
@@ -828,27 +828,20 @@ static void cxl_debugfs_create_dport_dir(struct cxl_dport *dport) &cxl_einj_inject_fops); } -static struct cxl_port *__devm_cxl_add_port (struct device *host, -struct device *uport_dev, -resource_size_t component_reg_phys, -struct cxl_dport *parent_dport) +static int cxl_port_add (struct cxl_port *port, +resource_size_t component_reg_phys, +struct cxl_dport *parent_dport) { -struct cxl_port *port; -struct device *dev; + struct device *dev __free(put_device) = &port->dev;int rc; - port =cxl_port_alloc (uport_dev, parent_dport); -if (IS_ERR (port)) -return port; - - dev = &port->dev; -if (is_cxl_memdev (uport_dev)) { -struct cxl_memdev *cxlmd =to_cxl_memdev (uport_dev); +if (is_cxl_memdev (port->uport_dev)) { +struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct cxl_dev_state *cxlds = cxlmd->cxlds; rc =dev_set_name (dev,"endpoint%d" , port->id);if (rc) - goto err; +return rc;/* * The endpoint driver already enumerated the component and RAS
@@ -861,19 +854,41 @@ static struct cxl_port *__devm_cxl_add_port(struct device *host, }else if (parent_dport) { rc =dev_set_name (dev,"port%d" , port->id);if (rc) - goto err; +return rc; rc =cxl_port_setup_regs (port, component_reg_phys);if (rc) - goto err; - }else +return rc; + }else { rc =dev_set_name (dev,"root%d" , port->id); -if (rc) - goto err; +if (rc) +return rc; + } rc =device_add (dev);if (rc) - goto err; +return rc; + +/* Inhibit the cleanup function invoked */ + dev =NULL ; +return 0 ; +} + +static struct cxl_port *__devm_cxl_add_port (struct device *host, +struct device *uport_dev, +resource_size_t component_reg_phys, +struct cxl_dport *parent_dport) +{ +struct cxl_port *port; +int rc; + + port =cxl_port_alloc (uport_dev, parent_dport); +if (IS_ERR (port)) +return port; + + rc =cxl_port_add (port, component_reg_phys, parent_dport); +if (rc) +return ERR_PTR (rc); rc =devm_add_action_or_reset (host, unregister_port, port);if (rc)
@@ -891,10 +906,6 @@ static struct cxl_port *__devm_cxl_add_port(struct device *host, port->pci_latency =cxl_pci_get_latency (to_pci_dev (uport_dev));return port; - -err: -put_device (dev); -return ERR_PTR (rc); }/**
Signature · 1 line
2.40.1
Quoted 6 lines · On Mon, 26 Aug 2024 08:30:56 +0000 Li Ming <[email protected]> wrote:
Using scope-based resource management
__free()marco with a new helper calledput_cxl_port()to drop open coded theput_device()used to dereference the 'struct device' incxl_port.Suggested-by Dan Williams <[email protected]>Signed-off-by Li Ming <[email protected]>
I'm a bit doubtful about this in general because of the increase in scope and reordering of the releases, but there
is one case below that I particularly dislike.
This is fiddly code so you've done a good job btw.
Jonathan
Quoted 13 lines
---
v2:
- Useguard()instead ofscoped_guard()in some cases.
- Ira: Check the return value offind_cxl_port_at().
Link to v1: https://lore.kernel.org/linux-cxl/[email protected]/T/#m07695675435bf702311dfc40f64289b9623afa16
---drivers/cxl/core/port.c +0
-0
drivers/cxl/core/port.c static int add_port_attach_ep(struct cxl_memdev *cxlmd, · line 1540
Quoted 4 lines
drivers/cxl/core/port.c +1
-0@@ -1539,8 +1537,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,struct device *uport_dev, struct device *dport_dev) { + struct cxl_port *port __free(put_cxl_port) = NULL;
I don't much like the ordering here. This will get freed later than it probably should.
Can you move it down to just before the device_lock() is taken? That way at least it will get released in the same order wrt to the parent_port->dev + keep it's constructor as near as possible.
Quoted 25 lines
drivers/cxl/core/port.c +2
-4struct device *dparent =grandparent (dport_dev); -struct cxl_port *port, *parent_port =NULL ;struct cxl_dport *dport, *parent_dport;resource_size_t component_reg_phys;int rc;@@ -1556,7 +1554,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return -ENXIO ; } - parent_port =find_cxl_port (dparent, &parent_dport); + struct cxl_port *parent_port __free(put_cxl_port) = +find_cxl_port (dparent, &parent_dport);if (!parent_port) {/* iterate to create this parent_port */ return -EAGAIN ;@@ -1596,10 +1595,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,*/ rc = -ENXIO ; } -put_device (&port->dev); } -put_device (&parent_port->dev);return rc; }
Re: [PATCH v2 2/3] cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
In reply to Li MingQuoted 8 lines · On Mon, 26 Aug 2024 08:30:57 +0000 Li Ming <[email protected]> wrote:
A
device_lock()anddevice_unlock()pair can be replaced by a cleanup helperscoped_guard()orguard(), that can enhance code readability. In CXL subsystem, still usedevice_lock()anddevice_unlock()pairs for cxl port resource protection, most of them can be replaced by ascoped_guard()or aguard()simply.Suggested-by Dan Williams <[email protected]>Signed-off-by Li Ming <[email protected]>
Hi Li Ming,
The advantages of previous patch become clearer here. So overall I think I'm convinced it's worth making the change.
Follow on comment below,
Quoted 7 lines
drivers/cxl/core/port.c +0
-0@@ -1561,40 +1556,38 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return -EAGAIN ;
drivers/cxl/core/port.c static int add_port_attach_ep(struct cxl_memdev *cxlmd, · line 1571
Quoted 10 lines
drivers/cxl/core/port.c +0
-8} -device_lock (&parent_port->dev); -if (!parent_port->dev.driver) { -dev_warn (&cxlmd->dev, -"port %s:%s disabled, failed to enumerate CXL.mem\n" , -dev_name (&parent_port->dev),dev_name (uport_dev)); - port =ERR_PTR (-ENXIO ); - goto out; - }
As per comment in previous patch, I'd pull the instantiation of port down here. That way constructor and destructor are at least nearby and the ordering is more what I'd expect.
Quoted 57 lines
drivers/cxl/core/port.c +28
-22+ scoped_guard(device, &parent_port->dev) { +if (!parent_port->dev.driver) { +dev_warn (&cxlmd->dev, +"port %s:%s disabled, failed to enumerate CXL.mem\n" , +dev_name (&parent_port->dev),dev_name (uport_dev)); +return -ENXIO ; + } + + port =find_cxl_port_at (parent_port, dport_dev, &dport); +if (!port) { + component_reg_phys =find_component_registers (uport_dev); + port =devm_cxl_add_port (&parent_port->dev, uport_dev, + component_reg_phys, parent_dport); +if (IS_ERR (port)) +return PTR_ERR (port); - port =find_cxl_port_at (parent_port, dport_dev, &dport); -if (!port) { - component_reg_phys =find_component_registers (uport_dev); - port =devm_cxl_add_port (&parent_port->dev, uport_dev, - component_reg_phys, parent_dport); -/* retry find to pick up the new dport information */ -if (!IS_ERR (port)) +/* retry find to pick up the new dport information */ port =find_cxl_port_at (parent_port, dport_dev, &dport); +if (!port) +return -ENXIO ; + } } -out: -device_unlock (&parent_port->dev); -if (IS_ERR (port)) - rc =PTR_ERR (port); -else { -dev_dbg (&cxlmd->dev,"add to new port %s:%s\n" , -dev_name (&port->dev),dev_name (port->uport_dev)); - rc =cxl_add_ep (dport, &cxlmd->dev); -if (rc == -EBUSY ) { -/* -* "can't" happen, but this error code means -* something to the caller, so translate it. -*/ - rc = -ENXIO ; - } +dev_dbg (&cxlmd->dev,"add to new port %s:%s\n" , +dev_name (&port->dev),dev_name (port->uport_dev)); + rc =cxl_add_ep (dport, &cxlmd->dev); +if (rc == -EBUSY ) { +/* +* "can't" happen, but this error code means +* something to the caller, so translate it. +*/ + rc = -ENXIO ; }return rc;
Re: [PATCH v2 3/3] cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
In reply to Li MingQuoted 2 lines · On Mon, 26 Aug 2024 08:30:58 +0000 Li Ming <[email protected]> wrote:
The "goto error" pattern is not recommended, it can be removed via refactoring.
I'd avoid this first comment. Goto error is fine, but not when it is not used for all error paths after the first one where it's relevant (which is what is happening here)
Quoted 10 lines
In
__devm_cxl_add_port(), there is a 'goto' to callput_device()for the error cases betweendevice_initialize()anddevice_add()to dereference the 'struct device' of a newcxl_port. The refactoring is introducing a new function calledcxl_port_add()which is used to add the 'struct device' of a newcxl_portto device hierarchy, moving the functions needing the help of above 'goto' intocxl_port_add(), and using a scope-based resource management__free()to drop the open codedput_device()and 'goto' for the error cases.
Quoted 3 lines
Suggested-by Dan Williams <[email protected]>Signed-off-by Li Ming <[email protected]>Reviewed-by Ira Weiny <[email protected]>
Nice.
Quoted 35 lines · Jonathan Cameron
Quoted 6 lines · On Mon, 26 Aug 2024 08:30:56 +0000 Li Ming <[email protected]> wrote:
Using scope-based resource management
__free()marco with a new helper calledput_cxl_port()to drop open coded theput_device()used to dereference the 'struct device' incxl_port.Suggested-by Dan Williams <[email protected]>Signed-off-by Li Ming <[email protected]>I'm a bit doubtful about this in general because of the increase in scope and reordering of the releases, but there
is one case below that I particularly dislike.This is fiddly code so you've done a good job btw.
Jonathan
Quoted 11 lines
---
v2:
- Useguard()instead ofscoped_guard()in some cases.
- Ira: Check the return value offind_cxl_port_at().
Link to v1: https://lore.kernel.org/linux-cxl/[email protected]/T/#m07695675435bf702311dfc40f64289b9623afa16
---drivers/cxl/core/port.c +0
-0drivers/cxl/core/port.c static int add_port_attach_ep(struct cxl_memdev *cxlmd, · line 1540
Quoted 4 lines
drivers/cxl/core/port.c +1
-0@@ -1539,8 +1537,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,struct device *uport_dev, struct device *dport_dev) { + struct cxl_port *port __free(put_cxl_port) = NULL;I don't much like the ordering here. This will get freed later than it probably should.
Quoted 4 lines
Can you move it down to just before the
device_lock()is taken? That way at least it will get released in the same order wrt to theparent_port->dev+ keep it's constructor as near as possible.
Oh, sure, thank you for pointing out, will do it in next version.
Quoted 27 lines
Quoted 27 lines
drivers/cxl/core/port.c +2
-4struct device *dparent =grandparent (dport_dev); -struct cxl_port *port, *parent_port =NULL ;struct cxl_dport *dport, *parent_dport;resource_size_t component_reg_phys;int rc;@@ -1556,7 +1554,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return -ENXIO ; } - parent_port =find_cxl_port (dparent, &parent_dport); + struct cxl_port *parent_port __free(put_cxl_port) = +find_cxl_port (dparent, &parent_dport);if (!parent_port) {/* iterate to create this parent_port */ return -EAGAIN ;@@ -1596,10 +1595,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,*/ rc = -ENXIO ; } -put_device (&port->dev); } -put_device (&parent_port->dev);return rc; }
Re: [PATCH v2 3/3] cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
In reply to Jonathan CameronQuoted 8 lines · Jonathan Cameron
Quoted 2 lines · On Mon, 26 Aug 2024 08:30:58 +0000 Li Ming <[email protected]> wrote:
The "goto error" pattern is not recommended, it can be removed via refactoring.
I'd avoid this first comment. Goto error is fine, but not when it is not used for all error paths after the first one where it's relevant (which is what is happening here)
Sure, will remove it, thanks.
Quoted 16 lines
Quoted 11 lines
In
__devm_cxl_add_port(), there is a 'goto' to callput_device()for the error cases betweendevice_initialize()anddevice_add()to dereference the 'struct device' of a newcxl_port. The refactoring is introducing a new function calledcxl_port_add()which is used to add the 'struct device' of a newcxl_portto device hierarchy, moving the functions needing the help of above 'goto' intocxl_port_add(), and using a scope-based resource management__free()to drop the open codedput_device()and 'goto' for the error cases.Quoted 3 lines
Suggested-by Dan Williams <[email protected]>Signed-off-by Li Ming <[email protected]>Reviewed-by Ira Weiny <[email protected]>Nice.
Reviewed-by Jonathan Cameron <[email protected]>