configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS
PATCH 1/1 configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS
From: Rogerio Guerra Borin <[email protected]>
Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and verdin-imx8mp configurations to specify the load address for FIT images loaded by the SPL.
As per lastest instructions from NXP, the generation of a HABv4 CSF (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load address to be set to a fixed value when binman is used. The address is defined by CONFIG_SPL_LOAD_FIT_ADDRESS.
Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the start of the DDR memory leaving plenty of room for the various DDR- residing artifacts to be moved to their usual load addresses which are close to the start of the DDR.
--- configs/verdin-imx8mm_defconfig | 1 + configs/verdin-imx8mp_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/verdin-imx8mm_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 CONFIG_OF_SYSTEM_SETUP=y
configs/verdin-imx8mp_defconfig +1 -0
@@ -38,6 +38,7 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 CONFIG_OF_SYSTEM_SETUP=y
Signature · 1 line
2.39.2
Quoted 11 lines · Hiago De Franco
From: Rogerio Guerra Borin <[email protected]>
Set the
CONFIG_SPL_LOAD_FIT_ADDRESSfor both verdin-imx8mm and verdin-imx8mp configurations to specify the load address for FIT images loaded by the SPL.As per lastest instructions from NXP, the generation of a HABv4 CSF (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load address to be set to a fixed value when binman is used. The address is defined by
CONFIG_SPL_LOAD_FIT_ADDRESS.
Quoted 7 lines
Here we set
CONFIG_SPL_LOAD_FIT_ADDRESSto an address 64MB past the start of the DDR memory leaving plenty of room for the various DDR- residing artifacts to be moved to their usual load addresses which are close to the start of the DDR.Signed-off-by Rogerio Guerra Borin <[email protected]>Signed-off-by Hiago De Franco <[email protected]>
Francesco
Quoted 12 lines · Hiago De Franco
From: Rogerio Guerra Borin <[email protected]>
Set the
CONFIG_SPL_LOAD_FIT_ADDRESSfor both verdin-imx8mm and verdin-imx8mp configurations to specify the load address for FIT images loaded by the SPL.As per lastest instructions from NXP, the generation of a HABv4 CSF (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load address to be set to a fixed value when binman is used. The address is defined by
CONFIG_SPL_LOAD_FIT_ADDRESS.
Quoted 7 lines
Here we set
CONFIG_SPL_LOAD_FIT_ADDRESSto an address 64MB past the start of the DDR memory leaving plenty of room for the various DDR- residing artifacts to be moved to their usual load addresses which are close to the start of the DDR.Signed-off-by Rogerio Guerra Borin <[email protected]>Signed-off-by Hiago De Franco <[email protected]>
Applied, thanks.