dt-bindings: input: touchscreen: Use generic node name
Subsystems (3)
PATCH v2 1/1 dt-bindings: input: touchscreen: Use generic node name
From: Fabio Estevam <[email protected]>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by Fabio Estevam <[email protected]>
Acked-by Conor Dooley <[email protected]>
---
Changes since v1:
- Squash the patches. (Rob)
.../devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml | 4 ++-- .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- .../devicetree/bindings/input/touchscreen/goodix.yaml | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml +2 -2
@@ -666,7 +666,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - touch@56 { + touchscreen@56 { compatible = "azoteq,iqs7210a"; reg = <0x56>; irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
@@ -704,7 +704,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - touch@56 { + touchscreen@56 { compatible = "azoteq,iqs7211e"; reg = <0x56>; irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW |
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +1 -1
@@ -126,7 +126,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - edt-ft5x06@38 { + touchscreen@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&gpio2>;
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +1 -1
@@ -69,7 +69,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - gt928@5d { + touchscreen@5d { compatible = "goodix,gt928"; reg = <0x5d>; interrupt-parent = <&gpio>;
Signature · 1 line
2.34.1
Quoted 9 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by Fabio Estevam <[email protected]>Acked-by Conor Dooley <[email protected]>
Applied, thank you.
Signature · 1 line
Dmitry