media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
Subsystems (4)
PATCH 1/3 media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
The t4ka3 sensor on the Xiaomi Mipad2 is used as a back facing sensor, it uses 4 CSI lanes, but the _DSM has CsiLanes set to 2. Extend the existing Xiaomi Mipad2 DMI quirk to override the wrong _DSM setting.
--- drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c +2 -0
@@ -109,6 +109,8 @@ static struct gmin_cfg_var lenovo_ideapad_miix_310_vars[] = {static struct gmin_cfg_var xiaomi_mipad2_vars[] = {/* _DSM contains the wrong CsiPort for the front facing OV5693 sensor */ {"INT33BE:00" ,"CsiPort" ,"0" }, +/* _DSM contains the wrong CsiLanes for the back facing T4KA3 sensor */ + {"XMCC0003:00" ,"CsiLanes" ,"4" }, {} };
Signature · 1 line
2.46.0
PATCH 2/3 media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
Debug logging every alloc + free just polutes the debug logs without adding much value, remove the alloc + free dev_dbg() calls.
--- drivers/staging/media/atomisp/pci/hmm/hmm.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/staging/media/atomisp/pci/hmm/hmm.c +0 -5
@@ -204,9 +204,6 @@ static ia_css_ptr __hmm_alloc(size_t bytes, enum hmm_bo_type type, goto bind_err; } -dev_dbg (atomisp_dev,"pages: 0x%08x (%zu bytes), type: %d, vmalloc %p\n" , - bo->start, bytes, type, vmalloc_noprof); -return bo->start; bind_err:
@@ -231,8 +228,6 @@ void hmm_free(ia_css_ptr virt) {struct hmm_buffer_object *bo; -dev_dbg (atomisp_dev,"%s: free 0x%08x\n" , __func__, virt); -if (WARN_ON (virt == mmgr_EXCEPTION))return ;
Signature · 1 line
2.46.0
Re: [PATCH 2/3] media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
Quoted 2 lines · Hans de Goede
Debug logging every alloc + free just polutes the debug logs without adding much value, remove the alloc + free
dev_dbg()calls.
Agree on the point and ideally we should remove/replace most of (all?) the messages by trace points.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH 3/3 media: atomisp: Improve binary finding debug logging
In reply to Hans de GoedeThe atomisp firmware contains a number of different pipeline binaries inside its firmware file and the driver selects the right one depending on the selected pipeline configuration.
Sometimes (e.g. when the selected output resolution is too big) it fails to find a binary. This happens especially when adding support for new sensors.
Improve the logging when this happens to make debugging easier:
1. Replace ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, ...) with standard dev_dbg() calls so that the logs can be enabled with dyndbg
2. Do not dump_stack() when this fails, doing so adds no useful extra info
3. With the dump_stack() call gone, remove the wrapper and rename __ia_css_binary_find() to ia_css_binary_find()
4. On error use dev_err() instead of dev_dbg() so that when things fail it is clear why they fail without needing to enable dyndbg
---
Note the log messages could also do with a bit of rewording and reflowing them to put more arguments on a single line to use less lines. I consider that out of scope for this patch which already enough (see the 1-4 enough) something like this should be done in a follow-up patch IMHO.
--- .../atomisp/pci/runtime/binary/src/binary.c | 295 +++++++++--------- 1 file changed, 139 insertions(+), 156 deletions(-)
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +139 -156
@@ -923,8 +923,9 @@ ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo,return 0 ; } -static int __ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) { +int ia_css_binary_find (struct ia_css_binary_descr *descr, +struct ia_css_binary *binary) +{int mode;bool online;bool two_ppc;
@@ -953,10 +954,10 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,/* MW: used after an error check, may accept NULL, but doubtfull */ assert (binary); -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n" , - descr, descr->mode, - binary); +dev_dbg (atomisp_dev, +"ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n" , + descr, descr->mode, + binary); mode = descr->mode; online = descr->online;
@@ -1001,15 +1002,15 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr, }/* print a map of the binary file */ -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE ,"BINARY INFO:\n" ); +dev_dbg (atomisp_dev,"BINARY INFO:\n" );for (i =0 ; i <IA_CSS_BINARY_NUM_MODES ; i++) { xcandidate = binary_infos[i];if (xcandidate) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE ,"%d:\n" , i); +dev_dbg (atomisp_dev,"%d:\n" , i);while (xcandidate) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE ," Name:%s Type:%d Cont:%d\n" , - xcandidate->blob->name, xcandidate->type, - xcandidate->sp.enable.continuous); +dev_dbg (atomisp_dev," Name:%s Type:%d Cont:%d\n" , + xcandidate->blob->name, xcandidate->type, + xcandidate->sp.enable.continuous); xcandidate = xcandidate->next; } }
@@ -1021,9 +1022,9 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,struct ia_css_binary_info *candidate = &xcandidate->sp;/* printf("sh_css_binary_find: evaluating candidate: * %d\n",candidate->id); */ -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() candidate = %p, mode = %d ID = %d\n" , - candidate, candidate->pipeline.mode, candidate->id); +dev_dbg (atomisp_dev, +"ia_css_binary_find() candidate = %p, mode = %d ID = %d\n" , + candidate, candidate->pipeline.mode, candidate->id);/* * MW: Only a limited set of jointly configured binaries can
@@ -1032,17 +1033,17 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,*/ if (!candidate->enable.continuous && continuous && (mode !=IA_CSS_BINARY_MODE_COPY )) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n" , - __LINE__, candidate->enable.continuous, - continuous, mode, -IA_CSS_BINARY_MODE_COPY ); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n" , + __LINE__, candidate->enable.continuous, + continuous, mode, +IA_CSS_BINARY_MODE_COPY );continue ; }if (striped && candidate->iterator.num_stripes ==1 ) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: binary is not striped\n" , - __LINE__); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: binary is not striped\n" , + __LINE__);continue ; }
@@ -1050,58 +1051,58 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr, (mode != IA_CSS_BINARY_MODE_COPY) && (mode != IA_CSS_BINARY_MODE_CAPTURE_PP) && (mode != IA_CSS_BINARY_MODE_VF_PP)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d != %d)\n" , - __LINE__, - candidate->pipeline.isp_pipe_version, isp_pipe_version); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d != %d)\n" , + __LINE__, + candidate->pipeline.isp_pipe_version, isp_pipe_version);continue ; }if (!candidate->enable.reduced_pipe && enable_reduced_pipe) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d\n" , - __LINE__, - candidate->enable.reduced_pipe, - enable_reduced_pipe); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d\n" , + __LINE__, + candidate->enable.reduced_pipe, + enable_reduced_pipe);continue ; }if (!candidate->enable.dvs_6axis && enable_dvs_6axis) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d\n" , - __LINE__, - candidate->enable.dvs_6axis, - enable_dvs_6axis); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d\n" , + __LINE__, + candidate->enable.dvs_6axis, + enable_dvs_6axis);continue ; }if (candidate->enable.high_speed && !enable_high_speed) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: %d && !%d\n" , - __LINE__, - candidate->enable.high_speed, - enable_high_speed); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: %d && !%d\n" , + __LINE__, + candidate->enable.high_speed, + enable_high_speed);continue ; }if (!candidate->enable.xnr && need_xnr) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: %d && !%d\n" , - __LINE__, - candidate->enable.xnr, - need_xnr); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: %d && !%d\n" , + __LINE__, + candidate->enable.xnr, + need_xnr);continue ; }if (!(candidate->enable.ds &2 ) && enable_yuv_ds) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d\n" , - __LINE__, - ((candidate->enable.ds &2 ) !=0 ), - enable_yuv_ds); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d\n" , + __LINE__, + ((candidate->enable.ds &2 ) !=0 ), + enable_yuv_ds);continue ; }if ((candidate->enable.ds &2 ) && !enable_yuv_ds) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: %d && !%d\n" , - __LINE__, - ((candidate->enable.ds &2 ) !=0 ), - enable_yuv_ds); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: %d && !%d\n" , + __LINE__, + ((candidate->enable.ds &2 ) !=0 ), + enable_yuv_ds);continue ; }
@@ -1115,100 +1116,100 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr, candidate->vf_dec.is_variable || /* or more than one output pin. */ xcandidate->num_output_pins > 1)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%p != NULL) && !(%d || %d || (%d >%d))\n" , - __LINE__, req_vf_info, - candidate->enable.vf_veceven, - candidate->vf_dec.is_variable, - xcandidate->num_output_pins,1 ); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%p != NULL) && !(%d || %d || (%d >%d))\n" , + __LINE__, req_vf_info, + candidate->enable.vf_veceven, + candidate->vf_dec.is_variable, + xcandidate->num_output_pins,1 );continue ; }if (!candidate->enable.dvs_envelope && need_dvs) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d\n" , - __LINE__, - candidate->enable.dvs_envelope, (int )need_dvs); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d\n" , + __LINE__, + candidate->enable.dvs_envelope, (int )need_dvs);continue ; }/* internal_res check considers input, output, and dvs envelope sizes */ ia_css_binary_internal_res (req_in_info, req_bds_out_info, req_bin_out_info, &dvs_env, candidate, &internal_res);if (internal_res.width > candidate->internal.max_width) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d > %d)\n" , - __LINE__, internal_res.width, - candidate->internal.max_width); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d > %d)\n" , + __LINE__, internal_res.width, + candidate->internal.max_width);continue ; }if (internal_res.height > candidate->internal.max_height) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d > %d)\n" , - __LINE__, internal_res.height, - candidate->internal.max_height); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d > %d)\n" , + __LINE__, internal_res.height, + candidate->internal.max_height);continue ; }if (!candidate->enable.ds && need_ds && !(xcandidate->num_output_pins >1 )) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d\n" , - __LINE__, candidate->enable.ds, (int )need_ds); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d\n" , + __LINE__, candidate->enable.ds, (int )need_ds);continue ; }if (!candidate->enable.uds && !candidate->enable.dvs_6axis && need_dz) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && !%d && %d\n" , - __LINE__, candidate->enable.uds, - candidate->enable.dvs_6axis, (int )need_dz); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && !%d && %d\n" , + __LINE__, candidate->enable.uds, + candidate->enable.dvs_6axis, (int )need_dz);continue ; }if (online && candidate->input.source ==IA_CSS_BINARY_INPUT_MEMORY ) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: %d && (%d == %d)\n" , - __LINE__, online, candidate->input.source, -IA_CSS_BINARY_INPUT_MEMORY ); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: %d && (%d == %d)\n" , + __LINE__, online, candidate->input.source, +IA_CSS_BINARY_INPUT_MEMORY );continue ; }if (!online && candidate->input.source ==IA_CSS_BINARY_INPUT_SENSOR ) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && (%d == %d)\n" , - __LINE__, online, candidate->input.source, -IA_CSS_BINARY_INPUT_SENSOR ); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && (%d == %d)\n" , + __LINE__, online, candidate->input.source, +IA_CSS_BINARY_INPUT_SENSOR );continue ; }if (req_bin_out_info->res.width < candidate->output.min_width || req_bin_out_info->res.width > candidate->output.max_width) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d > %d) || (%d < %d)\n" , - __LINE__, - req_bin_out_info->padded_width, - candidate->output.min_width, - req_bin_out_info->padded_width, - candidate->output.max_width); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d > %d) || (%d < %d)\n" , + __LINE__, + req_bin_out_info->padded_width, + candidate->output.min_width, + req_bin_out_info->padded_width, + candidate->output.max_width);continue ; }if (xcandidate->num_output_pins >1 &&/* in case we have a second output pin, */ req_vf_info) {/* and we need vf output. */ if (req_vf_info->res.width > candidate->output.max_width) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d < %d)\n" , - __LINE__, - req_vf_info->res.width, - candidate->output.max_width); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d < %d)\n" , + __LINE__, + req_vf_info->res.width, + candidate->output.max_width);continue ; } }if (req_in_info->padded_width > candidate->input.max_width) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d > %d)\n" , - __LINE__, req_in_info->padded_width, - candidate->input.max_width); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d > %d)\n" , + __LINE__, req_in_info->padded_width, + candidate->input.max_width);continue ; }if (!binary_supports_output_format (xcandidate, req_bin_out_info->format)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d\n" , - __LINE__, -binary_supports_output_format (xcandidate, req_bin_out_info->format)); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d\n" , + __LINE__, +binary_supports_output_format (xcandidate, req_bin_out_info->format));continue ; } if (xcandidate->num_output_pins > 1 &&
@@ -1217,11 +1218,11 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,/* check if the required vf format is supported. */ !binary_supports_output_format(xcandidate, req_vf_info->format)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d > %d) && (%p != NULL) && !%d\n" , - __LINE__, xcandidate->num_output_pins,1 , - req_vf_info, -binary_supports_output_format (xcandidate, req_vf_info->format)); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d > %d) && (%p != NULL) && !%d\n" , + __LINE__, xcandidate->num_output_pins,1 , + req_vf_info, +binary_supports_output_format (xcandidate, req_vf_info->format));continue ; }
@@ -1229,11 +1230,11 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,if (xcandidate->num_output_pins ==1 && req_vf_info && candidate->enable.vf_veceven && !binary_supports_vf_format (xcandidate, req_vf_info->format)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d == %d) && (%p != NULL) && %d && !%d\n" , - __LINE__, xcandidate->num_output_pins,1 , - req_vf_info, candidate->enable.vf_veceven, -binary_supports_vf_format (xcandidate, req_vf_info->format)); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d == %d) && (%p != NULL) && %d && !%d\n" , + __LINE__, xcandidate->num_output_pins,1 , + req_vf_info, candidate->enable.vf_veceven, +binary_supports_vf_format (xcandidate, req_vf_info->format));continue ; }
@@ -1241,37 +1242,37 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,if (xcandidate->num_output_pins ==1 && req_vf_info && candidate->enable.vf_veceven) {/* and we need vf output. */ if (req_vf_info->res.width > candidate->output.max_width) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: (%d < %d)\n" , - __LINE__, - req_vf_info->res.width, - candidate->output.max_width); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: (%d < %d)\n" , + __LINE__, + req_vf_info->res.width, + candidate->output.max_width);continue ; } }if (!supports_bds_factor (candidate->bds.supported_bds_factors, descr->required_bds_factor)) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , - __LINE__, candidate->bds.supported_bds_factors, - descr->required_bds_factor); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , + __LINE__, candidate->bds.supported_bds_factors, + descr->required_bds_factor);continue ; }if (!candidate->enable.dpc && need_dpc) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , - __LINE__, candidate->enable.dpc, - descr->enable_dpc); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , + __LINE__, candidate->enable.dpc, + descr->enable_dpc);continue ; }if (candidate->uds.use_bci && enable_capture_pp_bli) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , - __LINE__, candidate->uds.use_bci, - descr->enable_capture_pp_bli); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: 0x%x & 0x%x)\n" , + __LINE__, candidate->uds.use_bci, + descr->enable_capture_pp_bli);continue ; }
@@ -1290,13 +1291,6 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,break ; } -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() selected = %p, mode = %d ID = %d\n" , - xcandidate, xcandidate ? xcandidate->sp.pipeline.mode :0 , xcandidate ? xcandidate->sp.id :0 ); - -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() leave: return_err=%d\n" , err); -if (!err && xcandidate) dev_dbg(atomisp_dev, "Using binary %s (id %d), type %d, mode %d, continuous %s\n",
@@ -1306,23 +1300,12 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr, xcandidate->sp.pipeline.mode, xcandidate->sp.enable.continuous ? "true" : "false"); +if (err) +dev_err (atomisp_dev,"Failed to find a firmware binary matching the pipeline parameters\n" );return err; } -int ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) -{ -int ret =__ia_css_binary_find (descr, binary); - -if (unlikely (ret)) { -dev_dbg (atomisp_dev,"Seeking for binary failed at:" ); -dump_stack (); - } - -return ret; -} -unsigned ia_css_binary_max_vf_width (void ) {
Signature · 1 line
2.46.0
Andy Shevchenko
maintainerRe: [PATCH 3/3] media: atomisp: Improve binary finding debug logging
Quoted 22 lines · Hans de Goede
The atomisp firmware contains a number of different pipeline binaries inside its firmware file and the driver selects the right one depending on the selected pipeline configuration.
Sometimes (e.g. when the selected output resolution is too big) it fails to find a binary. This happens especially when adding support for new sensors.
Improve the logging when this happens to make debugging easier:
1. Replace
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, ...)with standarddev_dbg()calls so that the logs can be enabled with dyndbg2. Do not
dump_stack()when this fails, doing so adds no useful extra info3. With the
dump_stack()call gone, remove the wrapper and rename__ia_css_binary_find()toia_css_binary_find()4. On error use
dev_err()instead ofdev_dbg()so that when things fail it is clear why they fail without needing to enable dyndbg
Quoted 7 lines
Signed-off-by Hans de Goede <[email protected]>---
Note the log messages could also do with a bit of rewording and reflowing them to put more arguments on a single line to use less lines. I consider that out of scope for this patch which already enough (see the 1-4 enough) something like this should be done in a follow-up patch IMHO.
Yes, but...
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo, · line 927
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-2-static int __ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) { +int ia_css_binary_find (struct ia_css_binary_descr *descr, +struct ia_css_binary *binary)
...for example, in this case you touched both lines, so making them a single line just reduces the future churn.
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
Quoted 9 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +4
-4-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n" , - descr, descr->mode, - binary); +dev_dbg (atomisp_dev, +"ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n" , + descr, descr->mode, + binary);
So does this.
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 1005
Quoted 3 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +1
-1/* print a map of the binary file */ -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE ,"BINARY INFO:\n" ); +dev_dbg (atomisp_dev,"BINARY INFO:\n" );
TAB instead of space.
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
Quoted 11 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +5
-5-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n" , - __LINE__, candidate->enable.continuous, - continuous, mode, -IA_CSS_BINARY_MODE_COPY ); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n" , + __LINE__, candidate->enable.continuous, + continuous, mode, +IA_CSS_BINARY_MODE_COPY );
Now one line?
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 1046
Quoted 6 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +3
-3-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: binary is not striped\n" , - __LINE__); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: binary is not striped\n" , + __LINE__);
Now the __LINE__ argument is redundant as one may run-time turn it on and off. So, trimming it while converting to dev_dbg() makes sense to me as a one logical change. Ditto for other __LINE__ cases.
...
Otherwise it's a good clean up!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 3/3] media: atomisp: Improve binary finding debug logging
Hi Andy,
Thank you for the reviews.
Quoted 35 lines · Andy Shevchenko
Quoted 22 lines · Hans de Goede
The atomisp firmware contains a number of different pipeline binaries inside its firmware file and the driver selects the right one depending on the selected pipeline configuration.
Sometimes (e.g. when the selected output resolution is too big) it fails to find a binary. This happens especially when adding support for new sensors.
Improve the logging when this happens to make debugging easier:
1. Replace
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, ...)with standarddev_dbg()calls so that the logs can be enabled with dyndbg2. Do not
dump_stack()when this fails, doing so adds no useful extra info3. With the
dump_stack()call gone, remove the wrapper and rename__ia_css_binary_find()toia_css_binary_find()4. On error use
dev_err()instead ofdev_dbg()so that when things fail it is clear why they fail without needing to enable dyndbgQuoted 7 lines
Signed-off-by Hans de Goede <[email protected]>---
Note the log messages could also do with a bit of rewording and reflowing them to put more arguments on a single line to use less lines. I consider that out of scope for this patch which already enough (see the 1-4 enough) something like this should be done in a follow-up patch IMHO.Yes, but...
...
Quoted 7 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo, · line 927
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-2-static int __ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) { +int ia_css_binary_find (struct ia_css_binary_descr *descr, +struct ia_css_binary *binary)...for example, in this case you touched both lines, so making them a single line just reduces the future churn.
Ack, fixed in my media-atomisp branch.
Quoted 10 lines
...
Quoted 6 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-4-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n" , - descr, descr->mode, - binary); + dev_dbg(atomisp_dev, + "ia_css_binary_find() enter: descr=%p, (mode=%d), binary=%p\n",
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 960
Quoted 2 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-0+ descr, descr->mode, + binary);So does this.
Ack, fixed in my media-atomisp branch.
Quoted 8 lines
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 1005
Quoted 3 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +1
-1/* print a map of the binary file */ -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE ,"BINARY INFO:\n" ); +dev_dbg (atomisp_dev,"BINARY INFO:\n" );TAB instead of space.
Ack, fixed in my media-atomisp branch.
Quoted 11 lines
...
Quoted 8 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +3
-5-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n" , - __LINE__, candidate->enable.continuous, - continuous, mode, -IA_CSS_BINARY_MODE_COPY ); + dev_dbg(atomisp_dev, + "ia_css_binary_find() [%d] continue: !%d && %d && (%d != %d)\n", + __LINE__, candidate->enable.continuous,
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 1040
Quoted 2 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-0+ continuous, mode, + IA_CSS_BINARY_MODE_COPY);Now one line?
Ack, fixed in my media-atomisp branch.
Quoted 12 lines
...
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c static int __ia_css_binary_find(struct ia_css_binary_descr *descr, · line 1046
Quoted 6 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +3
-3-ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE , -"ia_css_binary_find() [%d] continue: binary is not striped\n" , - __LINE__); +dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: binary is not striped\n" , + __LINE__);Now the
__LINE__argument is redundant as one may run-time turn it on and off. So, trimming it while converting todev_dbg()makes sense to me as a one logical change. Ditto for other__LINE__cases.
Dropping __LINE__ is the bit which I want to postpone to a follow-up patch, the messages rejecting certain binaries as not suitable are not very unique and the __LINE__ print is necessary (atm) to help find which check exactly is failing. Not ideal I know, something for the TODO list.
Quoted 1 line
Otherwise it's a good clean up!
Thanks.
Regards,
Hans
Re: [PATCH 3/3] media: atomisp: Improve binary finding debug logging
Quoted 2 lines · Hans de Goede
Quoted 1 line · Andy Shevchenko
On Mon, Sep 02, 2024 at 11:52:29AM +0200, Hans de Goede wrote:
...
Quoted 9 lines
Quoted 7 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo, · line 927
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-2-static int __ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) { +int ia_css_binary_find (struct ia_css_binary_descr *descr, +struct ia_css_binary *binary)...for example, in this case you touched both lines, so making them a single line just reduces the future churn.
Ack, fixed in my media-atomisp branch.
(Actually there are more opportunities like this that I haven't commented on in the previous reply. I hope you have already found them and fixed accordingly)
...
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +3
-0+dev_dbg (atomisp_dev, +"ia_css_binary_find() [%d] continue: binary is not striped\n" , + __LINE__);
Quoted 8 lines
Quoted 3 lines
Now the
__LINE__argument is redundant as one may run-time turn it on and off. So, trimming it while converting todev_dbg()makes sense to me as a one logical change. Ditto for other__LINE__cases.Dropping
__LINE__is the bit which I want to postpone to a follow-up patch, the messages rejecting certain binaries as not suitable are not very unique and the__LINE__print is necessary (atm) to help find which check exactly is failing. Not ideal I know, something for the TODO list.
Yes, it's fine, after I sent the previous reply I saw that the previous implementation was a simple wrapper over dev_dbg() and __LINE__ "issue" was already there. I.o.w. I agree on the followup!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 3/3] media: atomisp: Improve binary finding debug logging
Hi,
Quoted 14 lines · Andy Shevchenko
Quoted 2 lines · Hans de Goede
Quoted 1 line · Andy Shevchenko
On Mon, Sep 02, 2024 at 11:52:29AM +0200, Hans de Goede wrote:
...
Quoted 8 lines
Quoted 7 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo, · line 927
Quoted 4 lines
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +2
-2-static int __ia_css_binary_find (struct ia_css_binary_descr *descr, -struct ia_css_binary *binary) { +int ia_css_binary_find (struct ia_css_binary_descr *descr, +struct ia_css_binary *binary)...for example, in this case you touched both lines, so making them a single line just reduces the future churn.
Quoted 5 lines
Quoted 1 line
Ack, fixed in my media-atomisp branch.
(Actually there are more opportunities like this that I haven't commented on in the previous reply. I hope you have already found them and fixed accordingly)
Yes I've gone over the entire patch and made lines longer to avoid needing multiple lines where possible.
Regards,
Hans
Hi,
Quoted 5 lines · Hans de Goede
The t4ka3 sensor on the Xiaomi Mipad2 is used as a back facing sensor, it uses 4 CSI lanes, but the
_DSMhas CsiLanes set to 2. Extend the existing Xiaomi Mipad2 DMI quirk to override the wrong_DSMsetting.Signed-off-by Hans de Goede <[email protected]>
I have merged these 3 patches in my media-atomisp branch:
https://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git/log/?h=media-atomisp
now.
And this/these will be included in my next pull-request to Mauro (to media subsystem maintainer)
Regards,
Hans
Quoted 17 lines
--- drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c | 2 ++ 1 file changed, 2 insertions(+)drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c +2
-0@@ -109,6 +109,8 @@ static struct gmin_cfg_var lenovo_ideapad_miix_310_vars[] = {static struct gmin_cfg_var xiaomi_mipad2_vars[] = {/* _DSM contains the wrong CsiPort for the front facing OV5693 sensor */ {"INT33BE:00" ,"CsiPort" ,"0" }, +/* _DSM contains the wrong CsiLanes for the back facing T4KA3 sensor */ + {"XMCC0003:00" ,"CsiLanes" ,"4" }, {} };
Quoted 3 lines · Hans de Goede
The t4ka3 sensor on the Xiaomi Mipad2 is used as a back facing sensor, it uses 4 CSI lanes, but the
_DSMhas CsiLanes set to 2. Extend the existing Xiaomi Mipad2 DMI quirk to override the wrong_DSMsetting.
Signature · 2 lines
With Best Regards, Andy Shevchenko