Skip to contentSkip to conversation

crypto: qcom-rng: fix support for ACPI-based systems

PATCH Superseded Brian Masney 1 participant 4 messages Sep 3, 2024 – Sep 4, 2024

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover crypto: qcom-rng: fix support for ACPI-based systems

The qcom-rng driver supports both ACPI and device tree based systems. ACPI support was broken when the hw_random interface support was added. This small series gets that working again.

This fix was boot tested on a Qualcomm Amberwing server.

Changes since v1:
- Use qcom_prng_ee_match_data instead of qcom_prng_match_data for the true skip_init to match previous behavior (Ernesto)
- Reordered patches so fix is first (Dmitry)

Brian Masney (2):
crypto: qcom-rng: fix support for ACPI-based systems
crypto: qcom-rng: rename *_of_data to *_match_data

 drivers/crypto/qcom-rng.c | 50 +++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 23 deletions(-)
Signature · 1 line
2.46.0
#1 lore raw

PATCH v2 1/2 crypto: qcom-rng: fix support for ACPI-based systems

The qcom-rng driver supports both ACPI and device tree based systems. ACPI support was broken when the hw_random interface support was added. Let's go ahead and fix this by adding a check for has_acpi_companion().

This fix was boot tested on a Qualcomm Amberwing server.

---
Note: I looked at updating the struct qcom_rng_acpi_match to have driver_data point to &qcom_prng_ee_of_data, however that won't work since struct acpi_device_id has a driver_data member of type kernel_ulong_t. struct of_device_id has the data member set to type const void *. As I get available time, I'll look to see if it's possible to migrate struct acpi_device_id.driver_data from a kernel_ulong_t to a const void * to match what's done in struct of_device_id. That will allow removing the has_acpi_companion() check in the future. I suspect that change is not going to be trivial though.

 drivers/crypto/qcom-rng.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/crypto/qcom-rng.c +19 -16
index c670d7d0c11e..7ba978f0ce8b 100644
@@ -176,6 +176,21 @@ static struct rng_alg qcom_rng_alg = {
 	}
 };
 
+static struct qcom_rng_of_data qcom_prng_of_data = {
+	.skip_init = false,
+	.hwrng_support = false,
+};
+
+static struct qcom_rng_of_data qcom_prng_ee_of_data = {
+	.skip_init = true,
+	.hwrng_support = false,
+};
+
+static struct qcom_rng_of_data qcom_trng_of_data = {
+	.skip_init = true,
+	.hwrng_support = true,
+};
+
 static int qcom_rng_probe(struct platform_device *pdev)
 {
 	struct qcom_rng *rng;
@@ -196,7 +211,10 @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->clk))
 		return PTR_ERR(rng->clk);
 
-	rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
+	if (has_acpi_companion(&pdev->dev))
+		rng->of_data = &qcom_prng_ee_of_data;
+	else
+		rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -231,21 +249,6 @@ static void qcom_rng_remove(struct platform_device *pdev)
 	qcom_rng_dev = NULL;
 }
 
-static struct qcom_rng_of_data qcom_prng_of_data = {
-	.skip_init = false,
-	.hwrng_support = false,
-};
-
-static struct qcom_rng_of_data qcom_prng_ee_of_data = {
-	.skip_init = true,
-	.hwrng_support = false,
-};
-
-static struct qcom_rng_of_data qcom_trng_of_data = {
-	.skip_init = true,
-	.hwrng_support = true,
-};
-
 static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
 	{ .id = "QCOM8160", .driver_data = 1 },
 	{}
Signature · 1 line
2.46.0
#2 lore raw
Quoted 11 lines · Brian Masney

The qcom-rng driver supports both ACPI and device tree based systems. ACPI support was broken when the hw_random interface support was added. Let's go ahead and fix this by adding a check for has_acpi_companion().

This fix was boot tested on a Qualcomm Amberwing server.

I found a cleaner and less intrusive way to fix this after looking through some other drivers, so let me post a v3. Sorry about the noise.

Brian

#3 lore raw

PATCH v2 2/2 crypto: qcom-rng: rename *_of_data to *_match_data

In reply to Brian Masney

The qcom-rng driver supports both ACPI and device tree based systems. Let's rename all instances of *_of_data to *_match_data so that it's not implied that this driver only supports device tree.

---
 drivers/crypto/qcom-rng.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/crypto/qcom-rng.c +13 -12
index 7ba978f0ce8b..f630962469c8 100644
@@ -36,14 +36,14 @@ struct qcom_rng {
 	void __iomem *base;
 	struct clk *clk;
 	struct hwrng hwrng;
-	struct qcom_rng_of_data *of_data;
+	struct qcom_rng_match_data *match_data;
 };
 
 struct qcom_rng_ctx {
 	struct qcom_rng *rng;
 };
 
-struct qcom_rng_of_data {
+struct qcom_rng_match_data {
 	bool skip_init;
 	bool hwrng_support;
 };
@@ -155,7 +155,7 @@ static int qcom_rng_init(struct crypto_tfm *tfm)
 
 	ctx->rng = qcom_rng_dev;
 
-	if (!ctx->rng->of_data->skip_init)
+	if (!ctx->rng->match_data->skip_init)
 		return qcom_rng_enable(ctx->rng);
 
 	return 0;
@@ -176,17 +176,17 @@ static struct rng_alg qcom_rng_alg = {
 	}
 };
 
-static struct qcom_rng_of_data qcom_prng_of_data = {
+static struct qcom_rng_match_data qcom_prng_match_data = {
 	.skip_init = false,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_prng_ee_of_data = {
+static struct qcom_rng_match_data qcom_prng_ee_match_data = {
 	.skip_init = true,
 	.hwrng_support = false,
 };
 
-static struct qcom_rng_of_data qcom_trng_of_data = {
+static struct qcom_rng_match_data qcom_trng_match_data = {
 	.skip_init = true,
 	.hwrng_support = true,
 };
@@ -212,9 +212,10 @@ static int qcom_rng_probe(struct platform_device *pdev)
 		return PTR_ERR(rng->clk);
 
 	if (has_acpi_companion(&pdev->dev))
-		rng->of_data = &qcom_prng_ee_of_data;
+		rng->match_data = &qcom_prng_ee_match_data;
 	else
-		rng->of_data = (struct qcom_rng_of_data *)of_device_get_match_data(&pdev->dev);
+		rng->match_data =
+			(struct qcom_rng_match_data *)of_device_get_match_data(&pdev->dev);
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -224,7 +225,7 @@ static int qcom_rng_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (rng->of_data->hwrng_support) {
+	if (rng->match_data->hwrng_support) {
 		rng->hwrng.name = "qcom_hwrng";
 		rng->hwrng.read = qcom_hwrng_read;
 		rng->hwrng.quality = QCOM_TRNG_QUALITY;
@@ -256,9 +257,9 @@ static const struct acpi_device_id __maybe_unused qcom_rng_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
 
 static const struct of_device_id __maybe_unused qcom_rng_of_match[] = {
-	{ .compatible = "qcom,prng", .data = &qcom_prng_of_data },
-	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_of_data },
-	{ .compatible = "qcom,trng", .data = &qcom_trng_of_data },
+	{ .compatible = "qcom,prng", .data = &qcom_prng_match_data },
+	{ .compatible = "qcom,prng-ee", .data = &qcom_prng_ee_match_data },
+	{ .compatible = "qcom,trng", .data = &qcom_trng_match_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_rng_of_match);
Signature · 1 line
2.46.0