FAILED: patch "[PATCH] usb: dwc3: Avoid waking up gadget during startxfer" failed to apply to 5.4-stable tree

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 00dcf2fa449f23a263343d7fe051741bdde65d0b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024090924-crescent-edging-00be@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:

00dcf2fa449f ("usb: dwc3: Avoid waking up gadget during startxfer") 047161686b81 ("usb: dwc3: Add remote wakeup handling") a02a26eb0aea ("usb: dwc3: gadget: Ignore Update Transfer cmd params") 63c4c320ccf7 ("usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer") 40edb52298df ("usb: dwc3: avoid NULL access of usb_gadget_driver") c560e76319a9 ("usb: dwc3: gadget: Fix START_TRANSFER link state check") 475e8be53d04 ("usb: dwc3: gadget: Check for disabled LPM quirk") 82c46b8ed9dc ("usb: dwc3: gadget: Introduce a DWC3 VBUS draw callback") f580170f135a ("usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc") e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") c5a7092f4015 ("usb: dwc3: gadget: make starting isoc transfers more robust") 9af21dd6faeb ("usb: dwc3: Add support for DWC_usb32 IP") 8bb14308a869 ("usb: dwc3: core: Use role-switch default dr_mode") d0550cd20e52 ("usb: dwc3: gadget: Do link recovery for SS and SSP") d94ea5319813 ("usb: dwc3: gadget: Properly set maxpacket limit") 586f4335700f ("usb: dwc3: Fix GTXFIFOSIZ.TXFDEP macro name") 5eb5afb07853 ("usb: dwc3: use proper initializers for property entries") 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 00dcf2fa449f23a263343d7fe051741bdde65d0b Mon Sep 17 00:00:00 2001
From: Prashanth K <[email protected]>
Date: Wed, 28 Aug 2024 12:13:02 +0530
Subject: [PATCH] usb: dwc3: Avoid waking up gadget during startxfer

When operating in High-Speed, it is observed that DSTS[USBLNKST] doesn't update link state immediately after receiving the wakeup interrupt. Since wakeup event handler calls the resume callbacks, there is a chance that function drivers can perform an ep queue, which in turn tries to perform remote wakeup from send_gadget_ep_cmd(STARTXFER). This happens because DSTS[[21:18] wasn't updated to U0 yet, it's observed that the latency of DSTS can be in order of milli-seconds. Hence avoid calling gadget_wakeup during startxfer to prevent unnecessarily issuing remote wakeup to host.

index 89fc690fdf34..291bc549935b 100644
@@ -287,6 +287,23 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async);
  *
  * Caller should handle locking. This function will issue @cmd with given
  * @params to @dep and wait for its completion.
+ *
+ * According to the programming guide, if the link state is in L1/L2/U3,
+ * then sending the Start Transfer command may not complete. The
+ * programming guide suggested to bring the link state back to ON/U0 by
+ * performing remote wakeup prior to sending the command. However, don't
+ * initiate remote wakeup when the user/function does not send wakeup
+ * request via wakeup ops. Send the command when it's allowed.
+ *
+ * Notes:
+ * For L1 link state, issuing a command requires the clearing of
+ * GUSB2PHYCFG.SUSPENDUSB2, which turns on the signal required to complete
+ * the given command (usually within 50us). This should happen within the
+ * command timeout set by driver. No additional step is needed.
+ *
+ * For L2 or U3 link state, the gadget is in USB suspend. Care should be
+ * taken when sending Start Transfer command to ensure that it's done after
+ * USB resume.
  */
 int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 		struct dwc3_gadget_ep_cmd_params *params)

@@ -327,30 +344,6 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 	}
 
-	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
-		int link_state;
-
-		/*
-		 * Initiate remote wakeup if the link state is in U3 when
-		 * operating in SS/SSP or L1/L2 when operating in HS/FS. If the
-		 * link state is in U1/U2, no remote wakeup is needed. The Start
-		 * Transfer command will initiate the link recovery.
-		 */
-		link_state = dwc3_gadget_get_link_state(dwc);
-		switch (link_state) {
-		case DWC3_LINK_STATE_U2:
-			if (dwc->gadget->speed >= USB_SPEED_SUPER)
-				break;
-
-			fallthrough;
-		case DWC3_LINK_STATE_U3:
-			ret = __dwc3_gadget_wakeup(dwc, false);
-			dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
-					ret);
-			break;
-		}
-	}
-
 	/*
 	 * For some commands such as Update Transfer command, DEPCMDPARn
 	 * registers are reserved. Since the driver often sends Update Transfer