ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names
Blueridge LED names to include the "led-" prefix as is proper. Rainier should match for ease of application design. In addition, the gpio line name ought to match.
Signed-off-by Eddie James <[email protected]>
--- .../arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 5 +++-- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 ++++++------ 2 files changed, 9 insertions(+), 8 deletions(-)
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts +3 -2
@@ -207,7 +207,8 @@ &gpio0 { /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","", "factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", + /*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","", + "", /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","",
@@ -215,7 +216,7 @@ &gpio0 { /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", - /*P0-P7*/ "","","","","pcieslot-power","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","", "",
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +6 -6
@@ -109,22 +109,22 @@ leds { compatible = "gpio-leds"; /* BMC Card fault LED at the back */ - bmc-ingraham0 { + led-bmc-ingraham0 { gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; }; /* Enclosure ID LED at the back */ - rear-enc-id0 { + led-rear-enc-id0 { gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; }; /* Enclosure fault LED at the back */ - rear-enc-fault0 { + led-rear-enc-fault0 { gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; }; /* PCIE slot power LED */ - pcieslot-power { + led-pcieslot-power { gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; }; };
@@ -203,7 +203,7 @@ &gpio0 { /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", + /*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","", /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","",
@@ -211,7 +211,7 @@ &gpio0 { /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", - /*P0-P7*/ "","","","","pcieslot-power","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
Signature · 1 line
2.43.0
Andrew Jeffery
maintainerPATCH 1/1 ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names
Quoted 5 lines · Eddie James
Blueridge LED names to include the "led-" prefix as is proper. Rainier should match for ease of application design. In addition, the gpio line name ought to match.
Thanks, I've applied this to be picked up through the BMC tree.
[1/1] ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED names
commit: bb5d0b3ea047506a8a55dec5f39977bd05a4ac98
--
Andrew Jeffery <[email protected]>