FAILED: patch "[PATCH] iio: pressure: bmp280: Fix waiting time for BMP3xx" failed to apply to 6.6-stable tree

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 262a6634bcc4f0c1c53d13aa89882909f281a6aa
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024100740-hundredth-lunchtime-a9da@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

262a6634bcc4 ("iio: pressure: bmp280: Fix waiting time for BMP3xx configuration") 439ce8961bdd ("iio: pressure: bmp280: Improve indentation and line wrapping") a2d43f44628f ("iio: pressure: fix some word spelling errors")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 262a6634bcc4f0c1c53d13aa89882909f281a6aa Mon Sep 17 00:00:00 2001
From: Vasileios Amoiridis <[email protected]>
Date: Thu, 11 Jul 2024 23:15:50 +0200
Subject: [PATCH] iio: pressure: bmp280: Fix waiting time for BMP3xx
configuration

According to the datasheet, both pressure and temperature can go up to oversampling x32. With this option, the maximum measurement time is not 80ms (this is for press x32 and temp x2), but it is 130ms nominal (calculated from table 3.9.2) and since most of the maximum values are around +15%, it is configured to 150ms.

index cc8553177977..3deaa57bb3f5 100644
@@ -1581,10 +1581,11 @@ static int bmp380_chip_config(struct bmp280_data *data)
 		}
 		/*
 		 * Waits for measurement before checking configuration error
-		 * flag. Selected longest measure time indicated in
-		 * section 3.9.1 in the datasheet.
+		 * flag. Selected longest measurement time, calculated from
+		 * formula in datasheet section 3.9.2 with an offset of ~+15%
+		 * as it seen as well in table 3.9.1.
 		 */
-		msleep(80);
+		msleep(150);
 
 		/* Check config error flag */
 		ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);