Skip to contentSkip to conversation

ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2

PATCH Applied Vasiliy Kovalev 3 participants 6 messages Oct 9, 2024 – Oct 16, 2024 Sound

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

---
 sound/pci/hda/patch_conexant.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
sound/pci/hda/patch_conexant.c +19 -0
index b61ce5e6f5ec5..956cb71c3bee1 100644
@@ -303,6 +303,7 @@ enum {
 	CXT_FIXUP_HP_SPECTRE,
 	CXT_FIXUP_HP_GATE_MIC,
 	CXT_FIXUP_MUTE_LED_GPIO,
+	CXT_FIXUP_HP_ELITEONE_OUT_DIS,
 	CXT_FIXUP_HP_ZBOOK_MUTE_LED,
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
@@ -320,6 +321,19 @@ static void cxt_fixup_stereo_dmic(struct hda_codec *codec,
 	spec->gen.inv_dmic_split = 1;
 }
 
+/* fix widget control pin settings */
+static void cxt_fixup_update_pinctl(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PROBE) {
+		/* Unset OUT_EN for this Node pin, leaving only HP_EN.
+		 * This is the value stored in the codec register after
+		 * the correct initialization of the previous windows boot.
+		 */
+		snd_hda_set_pin_ctl(codec, 0x1d, AC_PINCTL_HP_EN);
+	}
+}
+
 static void cxt5066_increase_mic_boost(struct hda_codec *codec,
 				   const struct hda_fixup *fix, int action)
 {
@@ -971,6 +985,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_gpio,
 	},
+	[CXT_FIXUP_HP_ELITEONE_OUT_DIS] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = cxt_fixup_update_pinctl,
+	},
 	[CXT_FIXUP_HP_ZBOOK_MUTE_LED] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_hp_zbook_mute_led,
@@ -1061,6 +1079,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
+	SND_PCI_QUIRK(0x103c, 0x83e5, "HP EliteOne 1000 G2", CXT_FIXUP_HP_ELITEONE_OUT_DIS),
 	SND_PCI_QUIRK(0x103c, 0x8402, "HP ProBook 645 G4", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x8427, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x844f, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
Signature · 1 line
2.33.8
Applied
#1 lore raw
Quoted 9 lines · Vasiliy Kovalev

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

Quoted 7 lines

working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

Thanks, applied now.

Takashi

#2 lore raw
Quoted 14 lines · Takashi Iwai
Quoted 12 lines · Vasiliy Kovalev

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP

Quoted 6 lines
Quoted 4 lines

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

Thanks, applied now.

Though this is already applied, is it possible to see if the issue also happens on S4?

Linux doesn't put PCI devices like HDA to D3 during shutdown and reboot while Windows does, that might be the reason boot Linux after Windows can workaround the issue.

Linux does put PCI devices to D3 for hibernate (S4), so we can use it as an experiment.

Kai-Heng

Quoted 3 lines

Takashi

#3 lore raw
Quoted 27 lines · Kai-Heng Feng
Quoted 14 lines · Takashi Iwai
Quoted 12 lines · Vasiliy Kovalev

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP

Quoted 6 lines
Quoted 4 lines

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

Thanks, applied now.

Though this is already applied, is it possible to see if the issue also happens on S4?

Quoted 6 lines

Linux doesn't put PCI devices like HDA to D3 during shutdown and reboot while Windows does, that might be the reason boot Linux after Windows can workaround the issue.

Linux does put PCI devices to D3 for hibernate (S4), so we can use it as an experiment.

Right, it should have been the cached version so that the setup is reapplied automatically; i.e. replace snd_hda_set_pin_ctl() with snd_hda_set_pin_ctl_cached().

Vasiliy, care to test and submit an incremental fix?

thanks,

Takashi

#4 lore raw
Quoted 33 lines · Takashi Iwai
Quoted 31 lines · Kai-Heng Feng
Quoted 14 lines · Takashi Iwai
Quoted 12 lines · Vasiliy Kovalev

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP

Quoted 6 lines
Quoted 4 lines

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

Thanks, applied now.

Though this is already applied, is it possible to see if the issue also happens on S4?

Linux doesn't put PCI devices like HDA to D3 during shutdown and reboot while Windows does, that might be the reason boot Linux after Windows can workaround the issue.

Quoted 8 lines
Quoted 2 lines

Linux does put PCI devices to D3 for hibernate (S4), so we can use it as an experiment.

Right, it should have been the cached version so that the setup is reapplied automatically; i.e. replace snd_hda_set_pin_ctl() with snd_hda_set_pin_ctl_cached().

Vasiliy, care to test and submit an incremental fix?

Ok, I compiled the module with the proposed changes and sent it to the user for testing on a machine with this codec. After testing, I will write about the result.

Quoted 4 lines

thanks,

Takashi

--
Thanks,
Vasiliy Kovalev

#5 lore raw

10.10.2024 11:36, Vasiliy Kovalev пишет:

Quoted 34 lines
Quoted 32 lines · Takashi Iwai
Quoted 29 lines · Kai-Heng Feng
Quoted 11 lines · Takashi Iwai
Quoted 9 lines · Vasiliy Kovalev

There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on.

However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d:

Quoted 5 lines
Quoted 5 lines

working conf. (windows): Pin-ctls: 0x80: HP
not working     (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem.

Though this is already applied, is it possible to see if the issue also happens on S4?

Linux doesn't put PCI devices like HDA to D3 during shutdown and reboot while Windows does, that might be the reason boot Linux after Windows can workaround the issue.

Linux does put PCI devices to D3 for hibernate (S4), so we can use it as an experiment.

Quoted 7 lines
Quoted 5 lines

Right, it should have been the cached version so that the setup is reapplied automatically; i.e. replace snd_hda_set_pin_ctl() with snd_hda_set_pin_ctl_cached().

Vasiliy, care to test and submit an incremental fix?

Ok, I compiled the module with the proposed changes and sent it to the user for testing on a machine with this codec. After testing, I will write about the result.

Using the snd_hda_set_pin_ctl_cache() function instead of snd_hda_set_pin_ctl() leads to the same positive result, there are no problems with sound. The patch has been sent [1]

[1] https://lore.kernel.org/all/[email protected]/

Quoted 4 lines
Quoted 4 lines

thanks,

Takashi

--
Thanks,
Vasiliy Kovalev