Skip to contentSkip to conversation

efi/tpcm: Add TPCM module support

PATCH New chench246 3 participants 8 messages Oct 31, 2024 – Jun 27, 2025

lore
Share & tools
lore

chench246

author
#0 lore raw

PATCH 1/1 efi/tpcm: Add TPCM module support

From: chench246 <[email protected]>

TPCM(Trusted Platform Control Module) is a Chinese standard and has similar function to tpm, but tpcm adds the function of active monitoring and control to the system. It can realize active startup measurement when the system starts,as well as dynamic measurement and monitoring when the program is running, further enhance the security of the system.

---
 grub-core/Makefile.core.def   |   7 ++
 grub-core/commands/efi/tpcm.c | 163 ++++++++++++++++++++++++++++++++++
 grub-core/commands/tpcm.c     |  99 +++++++++++++++++++++
 include/grub/efi/tpcm.h       |  60 +++++++++++++
 include/grub/err.h            |   3 +-
 5 files changed, 331 insertions(+), 1 deletion(-)
 create mode 100755 grub-core/commands/efi/tpcm.c
 create mode 100755 grub-core/commands/tpcm.c
 create mode 100644 include/grub/efi/tpcm.h
grub-core/Makefile.core.def +7 -0
index 063ef5dd7..f1250601b 100644
@@ -2562,6 +2562,13 @@ module = {
   enable = efi;
 };
 
+module = {
+  name = tpcm;
+  common = commands/tpcm.c;
+  efi = commands/efi/tpcm.c;
+  enable = x86_64_efi;
+};
+
 module = {
   name = tr;
   common = commands/tr.c;
grub-core/commands/efi/tpcm.c new file +163 -0

163 lines not on this page · raw message

grub-core/commands/tpcm.c new file +99 -0

99 lines not on this page · raw message

include/grub/efi/tpcm.h new file +60 -0

60 lines not on this page · raw message

include/grub/err.h +2 -1
index 1c07034cd..f5268dd47 100644
@@ -73,7 +73,8 @@ typedef enum
     GRUB_ERR_NET_NO_DOMAIN,
     GRUB_ERR_EOF,
     GRUB_ERR_BAD_SIGNATURE,
-    GRUB_ERR_BAD_FIRMWARE
+    GRUB_ERR_BAD_FIRMWARE,
+    GRUB_ERR_TPCM_VERIFY
   }
 grub_err_t;
 
Signature · 7 lines
2.17.1


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
author
#1 lore raw

PATCH 1/1 efi/tpcm: Add TPCM module support

[PATCH RESEND] efi/tpcm: Add TPCM module support

Hi GRUB maintainers,

I submitted the following patch a few months ago, but haven't yet received any feedback.

Could someone kindly review it? Please let me know if there's anything I can improve or clarify.

Thank you very much for your time!

Best regards,
chench

---------- Forwarded message ---------
发件人: chench246 <[email protected]>
Date: 2024年10月31日周四 19:35
Subject: [PATCH] efi/tpcm: Add TPCM module support
To: <[email protected]>
Cc: chench246 <[email protected]>, hao chen <[email protected]>

From: chench246 <[email protected]>

TPCM(Trusted Platform Control Module) is a Chinese standard and has similar function
to tpm, but tpcm adds the function of active monitoring and control to the system.
It can realize active startup measurement when the system starts,as well as dynamic
measurement and monitoring when the program is running, further enhance the security
of the system.

---
 grub-core/Makefile.core.def   |   7 ++
 grub-core/commands/efi/tpcm.c | 163 ++++++++++++++++++++++++++++++++++
 grub-core/commands/tpcm.c     |  99 +++++++++++++++++++++
 include/grub/efi/tpcm.h       |  60 +++++++++++++
 include/grub/err.h            |   3 +-
 5 files changed, 331 insertions(+), 1 deletion(-)
 create mode 100755 grub-core/commands/efi/tpcm.c
 create mode 100755 grub-core/commands/tpcm.c
 create mode 100644 include/grub/efi/tpcm.h
grub-core/Makefile.core.def +7 -0
index 063ef5dd7..f1250601b 100644
@@ -2562,6 +2562,13 @@ module = {
   enable = efi;
 };
 
+module = {
+  name = tpcm;
+  common = commands/tpcm.c;
+  efi = commands/efi/tpcm.c;
+  enable = x86_64_efi;
+};
+
 module = {
   name = tr;
   common = commands/tr.c;
grub-core/commands/efi/tpcm.c new file +62 -0

62 lines not on this page · raw message

__attribute__((unused)),

+                                 char *desc,
+                                 grub_addr_t addr,
+                                 grub_size_t size)
+{
+    grub_efi_handle_t   *handles = 0;
+    grub_efi_uintn_t    num_handles;
+    grub_efi_handle_t   grub_c2p_handle = 0;
+    grub_err_t  test_c2p_err = GRUB_ERR_BAD_OS;
+    grub_guid_t         c2p_guid = C2PGUID;
+    grub_uint32_t       measure_result = 0;
+    grub_uint32_t       control_result = 0;
+    grub_efi_boolean_t    verify_enable = 0;
+    grub_size_t         desc_len = 0;

+
+ handles = grub_efi_locate_handle(GRUB_EFI_BY_PROTOCOL, &c2p_guid,
NULL, &num_handles);
+ if (handles && (num_handles > 0))
+ {
+ struct c2p_protocol *c2p;
+
+ grub_c2p_handle = handles[0];
+ grub_dprintf ("tpcm", "measue memory addr 0x%lx size 0x%lx \n",
addr, size);
+ c2p = grub_efi_open_protocol(grub_c2p_handle, &c2p_guid,
+ GRUB_EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (c2p)
+ {

+            verify_enable = c2p->verify_is_enabled (c2p);
+            if (verify_enable)
+            {
+                struct addr_range range;
+                grub_efi_status_t status = 0;
+                grub_uint32_t stage = STAGE_INVALID;

+
+ range.start = addr;
+ range.length = size;
+

+                stage = get_tpcm_stage();
+                if (stage != STAGE_INVALID)
+                {

+ desc_len = grub_strlen(desc) + 1;
+ status = c2p->verify_raw (c2p, stage,
(grub_uint64_t)desc, desc_len, 1, &range, &measure_result, &control_result);
+ if ((!status) && ((control_result &
MEASURE_ACTION_MASK) == 0) )
+ {
+ grub_dprintf ("tpcm", "verify_raw success.
stage[%d]desc:[%s]\n", stage, desc);
+ test_c2p_err = GRUB_ERR_NONE;

+                    }
+                    else
+                    {
+                        grub_dprintf ("tpcm", "verify_raw error\n");
+                        while(1)
+                        {

+ grub_error (GRUB_ERR_TPCM_VERIFY, "tpcm verify
error. stage[%d]desc[%s]\n", stage, desc);
+ asm volatile ("hlt");
+ }
+ }
+ }
+ else {
+ grub_dprintf ("tpcm", "invalid stage\n");
+ }
+
+ update_measured_id();
+
+ }
+ else {
+ grub_dprintf ("tpcm", "image verify not enabled\n");
+ test_c2p_err = GRUB_ERR_NONE;
+ }
+ }
+ else
+ grub_dprintf ("tpcm", "open c2p protocol failed\n");

+    }
+    else
+    {
+        /* keep compatible with non-measurement-support bios. */
+        grub_dprintf ("tpcm", "not found C2P protocol\n");
+        test_c2p_err = GRUB_ERR_NONE;

+ }
+
+ return test_c2p_err;
+}
+
+/*
+ grub_tpcm_measure_memory:
+ */
+grub_err_t grub_tpcm_measure_memory(void *context, grub_addr_t buf, grub_size_t size)
+{

+    char *p_context = (char *)context;
+    char *p, *p_desc;
+    char tmp[TPCM_MAX_BUF_SIZE] = {'0'};
+    enum grub_file_type type;

+
+ if (!p_context)
+ return GRUB_ERR_BUG;
+

+    p = grub_strchr(p_context, '|');
+    p_desc = p + 1;
+    grub_memcpy(tmp, p_context, (p-p_context));
+    type = grub_strtoul(tmp, 0, 10);

+
+ return measure_memory(type, p_desc, buf, size);
+}
+

grub-core/commands/tpcm.c new file +36 -0
new file mode 100755
index 000000000..1c8bd77ce
@@ -0,0 +1,99 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *  Core TPCM support code.
+ */
+
+#include <grub/err.h>
+#include <grub/verify.h>
+#include <grub/dl.h>
+#include <grub/efi/tpcm.h>
+
+GRUB_MOD_LICENSE ("GPLv3+");
+
+static char context_buf[TPCM_MAX_BUF_SIZE];
+
+static grub_err_t grub_tpcm_verify_init(grub_file_t io,
+                      enum grub_file_type type,
+                      void **context,
+                      enum grub_verify_flags *flags)
+{
+    grub_memset(context_buf, 0, TPCM_MAX_BUF_SIZE);
+    grub_snprintf(context_buf, TPCM_MAX_BUF_SIZE, "%d|%s", (type &

GRUB_FILE_TYPE_MASK), io->name);
+ *context = context_buf;
+ *flags |= GRUB_VERIFY_FLAGS_SINGLE_CHUNK;
+
+ return GRUB_ERR_NONE;
+}
+
+static grub_err_t grub_tpcm_verify_write(void *context, void *buf , grub_size_t size )
+{
+ return grub_tpcm_measure_memory(context, (grub_addr_t)buf, size);
+}
+
+static grub_err_t grub_tpcm_verify_string (char *str, enum grub_verify_string_type type)
+{

+    const char *prefix = NULL;
+    char *description, *context;
+    grub_err_t status;
+
+    switch (type)
+    {
+    case GRUB_VERIFY_KERNEL_CMDLINE:

+ prefix = "kernel_cmdline: ";
+ break;
+ case GRUB_VERIFY_MODULE_CMDLINE:
+ prefix = "module_cmdline: ";
+ break;
+ case GRUB_VERIFY_COMMAND:
+ prefix = "grub_cmd: ";
+ break;
+ }
+

+    context = grub_zalloc(grub_strlen (str) + grub_strlen (prefix) + 1 +
4);  /* 4 for type */
+    if (!context)
+        return grub_errno;
+
+    grub_snprintf(context, 4, "%d|", (type & GRUB_FILE_TYPE_MASK));
+    description = context + grub_strlen(context);
+    grub_memcpy(description, prefix, grub_strlen (prefix));
+    grub_memcpy(description + grub_strlen (prefix), str, grub_strlen (str)

+ 1);
+
+ status = grub_tpcm_measure_memory(context, (grub_addr_t)str,
grub_strlen(str));
+
+ grub_free(context);
+
+ return status;
+}
+
+struct grub_file_verifier grub_tpcm_verifier = {

+    .name = "tpcm",
+    .init  = grub_tpcm_verify_init,
+    .write = grub_tpcm_verify_write,
+    .verify_string = grub_tpcm_verify_string,

+};
+
+GRUB_MOD_INIT (tpcm)
+{
+ grub_verifier_register(&grub_tpcm_verifier);
+}
+
+GRUB_MOD_FINI (tpcm)
+{
+ grub_verifier_unregister(&grub_tpcm_verifier);
+}
+

include/grub/efi/tpcm.h new file +26 -0
new file mode 100644
index 000000000..a4e0c765a
@@ -0,0 +1,60 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef GRUB_EFI_TPCM_HEADER
+#define GRUB_EFI_TPCM_HEADER 1
+
+#include <grub/file.h>
+#include <grub/efi/api.h>
+#include <grub/efi/efi.h>
+
+#define C2PGUID         {0xf89ab5cd, 0x2829, 0x422f, {0xa5, 0xf3, 0x03,

0x28, 0xe0, 0x6c, 0xfc, 0xbb}}

+#define MEASURE_RESULT_MASK          (0xff00)
+#define MEASURE_RESULT_SHIFT         (16)
+#define MEASURE_ACTION_MASK          (0x1)
+#define TPCM_MAX_BUF_SIZE            128

+
+/*
+ stage layout:
+ 2000~2999: +1 every time
+*/
+

+#define STAGE_START      2000
+#define STAGE_END        2999
+#define STAGE_INVALID    3000

+
+struct addr_range {
+ grub_uint64_t start;
+ grub_uint64_t length;
+};
+struct c2p_protocol {
+ grub_efi_status_t (__grub_efi_api *verify_raw) (struct c2p_protocol
*this,

+                                    grub_uint32_t measure_stage,
+                                    grub_uint64_t image_info,
+                                    grub_uint32_t image_info_size,
+                                    grub_uint32_t num_addr_range,
+                                    struct addr_range ranges[],
+                                    grub_uint32_t *measure_result,
+                                    grub_uint32_t *control_result);

+ grub_efi_boolean_t (__grub_efi_api *verify_is_enabled)(struct
c2p_protocol *this);
+};
+typedef struct c2p_protocol c2p_protocol_t;
+
+grub_err_t grub_tpcm_measure_memory(void *context, grub_addr_t buf, grub_size_t size);
+
+#endif

include/grub/err.h +2 -1
index 1c07034cd..f5268dd47 100644
@@ -73,7 +73,8 @@ typedef enum
     GRUB_ERR_NET_NO_DOMAIN,
     GRUB_ERR_EOF,
     GRUB_ERR_BAD_SIGNATURE,
-    GRUB_ERR_BAD_FIRMWARE
+    GRUB_ERR_BAD_FIRMWARE,
+    GRUB_ERR_TPCM_VERIFY
   }
 grub_err_t;
 
Signature · 1 line
2.17.1

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

#2 lore raw

Re: Fwd [PATCH] efi/tpcm: Add TPCM module support

From: Khalid Ali <[email protected]>

Quoted 5 lines

TPCM(Trusted Platform Control Module) is a Chinese standard and has similar function to tpm, but tpcm adds the function of active monitoring and control to the system. It can realize active startup measurement when the system starts,as well as dynamic measurement and monitoring when the program is running, further enhance the security of the system.

Hi, Sorry for unresponsiveness.

The standard you are introducing seems less common, i assume it is a preprietary standard. If it is a preprietary unfortunately, it may not be accepted. If you don't mind if i ask you:

* Can't TPM become enough for us.
* You are working on UEFI, it should be present on official UEFI documentation hosted on https://uefi.org, otherwise on BIOS it must be publicly documented online.
* Do all or most computer support that standard, if it is chip like TPM, is it present on computers made by notable vendors.

And could you please break your patches into smaller, it will make review easier, send each source file seperately. I will suggest you to send an RFC that includes a detailed technical information. mostly those question i asked you, and most importantly please supply sources and links to the official specification.

Best regards,
khaalid

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

author
#3 lore raw

v2 cover efi/tpcm: Add Trusted Platform Control

Hi, Khaalid

This series adds basic support for the Trusted Platform Control Module (TPCM) to the EFI build of GRUB. TPCM is an open specification (GB/T 40650-2021) that extends TPM with active runtime measurement, enabling continuous attestation on devices that must comply with the "Level-3 Enhanced Security" guideline in china. Reference link:
https://std.samr.gov.cn/gb/search/gbDetailed?id=CE1E6A1DD5DA58F6E0539
7BE0A0A68DF

If tpcm related protocol is not implemented in UEFI, then tpcm module directly returns NONE, keep compatible with non-measurement-support UEFI. TPCM is still developing, and we will actively push tpcm function into UEFI specification in the near future.

Some BIOS manufacturers such as Insyde, Byo, etc. have added support for tpcm, and some OEM manufacturers such as Lenovo, Inspur, H3C, etc. have enabled tpcm on related products.

### Key capabilities introduced:
* Probe the EFI TPCM protocol (GUID F89AB5CD-2829-422F-A5F3-0328E06C FCBB)
* Provide grub_tpcm_verify_init, grub_tpcm_verify_write, grub_tpcm_verify_string commands

### Changes since v1
* Split monolithic patch into 2 logical pieces

Thanks for the review and split suggestion.

Feedback welcome!

Best regards

chench246 (2):
efi/tpcm: Add UEFI interface for TPCM module
efi/tpcm: Add complete support of TPCM module

 grub-core/Makefile.core.def   |   7 ++
 grub-core/commands/efi/tpcm.c | 163 ++++++++++++++++++++++++++++++++++
 grub-core/commands/tpcm.c     |  99 +++++++++++++++++++++
 include/grub/efi/tpcm.h       |  60 +++++++++++++
 include/grub/err.h            |   3 +-
 5 files changed, 331 insertions(+), 1 deletion(-)
 create mode 100755 grub-core/commands/efi/tpcm.c
 create mode 100755 grub-core/commands/tpcm.c
 create mode 100644 include/grub/efi/tpcm.h
Signature · 7 lines
2.17.1


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
author
#4 lore raw

PATCH v2 1/2 efi/tpcm: Add UEFI interface for TPCM module

TPCM(Trusted Platform Control Module) is a Chinese standard, and the interface implementation complies with UEFI specification. If tpcm related protocol is not implemented in UEFI, then tpcm module directly returns NONE.

---
 grub-core/commands/efi/tpcm.c | 163 ++++++++++++++++++++++++++++++++++
 include/grub/efi/tpcm.h       |  60 +++++++++++++
 include/grub/err.h            |   3 +-
 3 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100755 grub-core/commands/efi/tpcm.c
 create mode 100644 include/grub/efi/tpcm.h
grub-core/commands/efi/tpcm.c new file +163 -0
new file mode 100755
index 000000000..bc97e800c
@@ -0,0 +1,163 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *  EFI TPCM support code.
+ */
+
+#include <grub/err.h>
+#include <grub/efi/tpcm.h>
+
+
+static grub_uint32_t g_measured_id = STAGE_START;
+
+/*
+    get_tpcm_stage:
+      TPCM does not make a distinction with the type of
+    measured target, so we use g_measured_id directly
+    for the stage.
+ */
+static grub_uint32_t get_tpcm_stage(void)
+{
+    grub_uint32_t stage = STAGE_INVALID;
+
+    stage = g_measured_id;
+
+    if (stage < STAGE_START || stage > STAGE_END)
+        stage = STAGE_INVALID;
+
+    return stage;
+}
+
+/*
+    update_measured_id:
+      update g_measured_id +1 every time measured, and g_measured_id
+    will never be decreased.
+ */
+static void update_measured_id(void)
+{
+    g_measured_id++;
+}
+
+/*
+    measure_memory:
+      measure the memery region--(addr, size) through the TPCM protocol.
+    if TPCM protocol is not exist in BIOS, it will return SUCC to keep
+    compatible with non-measurement-support bios; if TPCM protocol is
+    exist but not enabled, it will also return SUCC.
+ */
+static grub_err_t measure_memory(enum grub_file_type type __attribute__((unused)),
+                                 char *desc,
+                                 grub_addr_t addr,
+                                 grub_size_t size)
+{
+    grub_efi_handle_t   *handles = 0;
+    grub_efi_uintn_t    num_handles;
+    grub_efi_handle_t   grub_c2p_handle = 0;
+    grub_err_t  test_c2p_err = GRUB_ERR_BAD_OS;
+    grub_guid_t         c2p_guid = C2PGUID;
+    grub_uint32_t       measure_result = 0;
+    grub_uint32_t       control_result = 0;
+    grub_efi_boolean_t    verify_enable = 0;
+    grub_size_t         desc_len = 0;
+
+    handles = grub_efi_locate_handle(GRUB_EFI_BY_PROTOCOL, &c2p_guid, NULL, &num_handles);
+    if (handles && (num_handles > 0))
+    {
+        struct c2p_protocol *c2p;
+
+        grub_c2p_handle = handles[0];
+        grub_dprintf ("tpcm", "measue memory addr 0x%lx size 0x%lx  \n", addr, size);
+        c2p = grub_efi_open_protocol(grub_c2p_handle, &c2p_guid,
+                                      GRUB_EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+        if (c2p)
+        {
+            verify_enable = c2p->verify_is_enabled (c2p);
+            if (verify_enable)
+            {
+                struct addr_range range;
+                grub_efi_status_t status = 0;
+                grub_uint32_t stage = STAGE_INVALID;
+
+                range.start  = addr;
+                range.length = size;
+
+                stage = get_tpcm_stage();
+                if (stage != STAGE_INVALID)
+                {
+                    desc_len = grub_strlen(desc) + 1;
+                    status = c2p->verify_raw (c2p, stage, (grub_uint64_t)desc, desc_len, 1, &range, &measure_result, &control_result);
+                    if ((!status) && ((control_result & MEASURE_ACTION_MASK) == 0) )
+                    {
+                        grub_dprintf ("tpcm", "verify_raw success. stage[%d]desc:[%s]\n", stage, desc);
+                        test_c2p_err = GRUB_ERR_NONE;
+                    }
+                    else
+                    {
+                        grub_dprintf ("tpcm", "verify_raw error\n");
+                        while(1) 
+                        {
+                            grub_error (GRUB_ERR_TPCM_VERIFY, "tpcm verify error. stage[%d]desc[%s]\n", stage, desc);
+                            asm volatile ("hlt");
+                        }
+                    }
+                }
+                else {
+                    grub_dprintf ("tpcm", "invalid stage\n");
+                }
+
+                update_measured_id();
+
+            }
+            else {
+                grub_dprintf ("tpcm", "image verify not enabled\n");
+                test_c2p_err = GRUB_ERR_NONE;
+            }
+        }
+        else
+            grub_dprintf ("tpcm", "open c2p protocol failed\n");
+    }
+    else
+    {
+        /* keep compatible with non-measurement-support bios. */
+        grub_dprintf ("tpcm", "not found C2P protocol\n");
+        test_c2p_err = GRUB_ERR_NONE;
+    }
+
+    return test_c2p_err;
+}
+
+/*
+    grub_tpcm_measure_memory:
+ */
+grub_err_t grub_tpcm_measure_memory(void *context, grub_addr_t buf, grub_size_t size)
+{
+    char *p_context = (char *)context;
+    char *p, *p_desc;
+    char tmp[TPCM_MAX_BUF_SIZE] = {'0'};
+    enum grub_file_type type;
+
+    if (!p_context)
+        return GRUB_ERR_BUG;
+
+    p = grub_strchr(p_context, '|');
+    p_desc = p + 1;
+    grub_memcpy(tmp, p_context, (p-p_context));
+    type = grub_strtoul(tmp, 0, 10);
+
+    return measure_memory(type, p_desc, buf, size);
+}
+
include/grub/efi/tpcm.h new file +60 -0

60 lines not on this page · raw message

include/grub/err.h +2 -1
index 202fa8a7a..4d2756097 100644
@@ -75,7 +75,8 @@ typedef enum
     GRUB_ERR_BAD_SIGNATURE,
     GRUB_ERR_BAD_FIRMWARE,
     GRUB_ERR_STILL_REFERENCED,
-    GRUB_ERR_RECURSION_DEPTH
+    GRUB_ERR_RECURSION_DEPTH,
+    GRUB_ERR_TPCM_VERIFY
   }
 grub_err_t;
 
Signature · 7 lines
2.17.1


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
author
#6 lore raw

PATCH v2 2/2 efi/tpcm: Add complete support of TPCM module

In reply to chench246

TPCM(Trusted Platform Control Module) is a Chinese standard and has similar function to tpm, but tpcm adds the function of active monitoring and control to the system. It can realize active startup measurement when the system starts,as well as dynamic measurement and monitoring when the program is running, further enhance the security of the system.

---
 grub-core/Makefile.core.def |  7 +++
 grub-core/commands/tpcm.c   | 99 +++++++++++++++++++++++++++++++++++++
 2 files changed, 106 insertions(+)
 create mode 100755 grub-core/commands/tpcm.c
grub-core/Makefile.core.def +7 -0
index 24e8c8437..fc31dbca4 100644
@@ -2600,6 +2600,13 @@ module = {
   cppflags = '-I$(srcdir)/lib/tss2 -I$(srcdir)/lib/libtasn1-grub';
 };
 
+module = {
+  name = tpcm;
+  common = commands/tpcm.c;
+  efi = commands/efi/tpcm.c;
+  enable = x86_64_efi;
+};
+
 module = {
   name = tr;
   common = commands/tr.c;
grub-core/commands/tpcm.c new file +99 -0

99 lines not on this page · raw message

Signature · 7 lines
2.17.1


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
#5 lore raw

Re: [PATCH v2 1/2] efi/tpcm: Add UEFI interface for TPCM module

In reply to chench246
Quoted 46 lines · On 27 Jun 2025, at 1:12 PM, chench246 <[email protected]> wrote:

TPCM(Trusted Platform Control Module) is a Chinese standard, and the interface implementation complies with UEFI specification. If tpcm related protocol is not implemented in UEFI, then tpcm module directly returns NONE.

---

grub-core/commands/efi/tpcm.c | 163 ++++++++++++++++++++++++++++++++++
include/grub/efi/tpcm.h       |  60 +++++++++++++
include/grub/err.h            |   3 +-
3 files changed, 225 insertions(+), 1 deletion(-)

create mode 100755 grub-core/commands/efi/tpcm.c
create mode 100644 include/grub/efi/tpcm.h

grub-core/commands/efi/tpcm.c new file +22 -0
new file mode 100755
index 000000000..bc97e800c
@@ -0,0 +1,163 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *  EFI TPCM support code.
+ */
+
+#include <grub/err.h>
+#include <grub/efi/tpcm.h>

grub-core/commands/efi/tpcm.c line 32

Quoted 10 lines
grub-core/commands/efi/tpcm.c new file +10 -0
+
+
+static grub_uint32_t g_measured_id = STAGE_START;
+
+/*
+    get_tpcm_stage:
+      TPCM does not make a distinction with the type of
+    measured target, so we use g_measured_id directly
+    for the stage.
+ */

Hi hao chen,

For Multi line comments, follow like below. please correct it all the patches.

/*
* get_tpcm_stage:
* TPCM does not make a distinction with the type of measured target,
*. so we use g_measured_id directly for the stage. */

grub-core/commands/efi/tpcm.c line 33

Quoted 1 line
grub-core/commands/efi/tpcm.c new file +1 -0
+static grub_uint32_t get_tpcm_stage(void)

Use the space after function name and new line after return type like below. Please correct it all the patches.

static
grub_uint32_t get_tpcm_stage (void)

grub-core/commands/efi/tpcm.c line 40

Quoted 7 lines
grub-core/commands/efi/tpcm.c new file +7 -0
+{
+    grub_uint32_t stage = STAGE_INVALID;
+
+    stage = g_measured_id;
+
+    if (stage < STAGE_START || stage > STAGE_END)
+        stage = STAGE_INVALID;

Correct the indentation here like

if (stage < STAGE_START || stage > STAGE_END)
stage = STAGE_INVALID;

grub-core/commands/efi/tpcm.c line 49

Quoted 9 lines
grub-core/commands/efi/tpcm.c new file +9 -0
+
+    return stage;
+}
+
+/*
+    update_measured_id:
+      update g_measured_id +1 every time measured, and g_measured_id
+    will never be decreased.
+ */

Same follow the multiline comments here

/*
* update_measured_id:
* update g_measured_id +1 every time measured, and g_measured_id
* will never be decreased.
*/

grub-core/commands/efi/tpcm.c line 50

Quoted 1 line
grub-core/commands/efi/tpcm.c new file +1 -0
+static void update_measured_id(void)

Use space after function name and newline after return type

static void
update_measured_id (void)

grub-core/commands/efi/tpcm.c line 61

Quoted 11 lines
grub-core/commands/efi/tpcm.c new file +11 -0
+{
+    g_measured_id++;
+}
+
+/*
+    measure_memory:
+      measure the memery region--(addr, size) through the TPCM protocol.
+    if TPCM protocol is not exist in BIOS, it will return SUCC to keep
+    compatible with non-measurement-support bios; if TPCM protocol is
+    exist but not enabled, it will also return SUCC.
+ */

Same follow the multiline comments here

grub-core/commands/efi/tpcm.c line 65

Quoted 4 lines
grub-core/commands/efi/tpcm.c new file +4 -0
+static grub_err_t measure_memory(enum grub_file_type type __attribute__((unused)),
+                                 char *desc,
+                                 grub_addr_t addr,
+                                 grub_size_t size)

Use space after function name and newline after return type when defining, and correct the indentation issue. Like below

static grub_err_t
measure_memory (enum grub_file_type type __attribute__((unused)),
char *desc, grub_addr_t addr, grub_size_t size)

grub-core/commands/efi/tpcm.c line 67

Quoted 2 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+{
+    grub_efi_handle_t   *handles = 0;

My suggestion for pointers, initialise with NULL and don’t use 0.

grub_efi_handle_t *handles = NULL;

grub-core/commands/efi/tpcm.c line 74

Quoted 7 lines
grub-core/commands/efi/tpcm.c new file +7 -0
+    grub_efi_uintn_t    num_handles;
+    grub_efi_handle_t   grub_c2p_handle = 0;
+    grub_err_t  test_c2p_err = GRUB_ERR_BAD_OS;
+    grub_guid_t         c2p_guid = C2PGUID;
+    grub_uint32_t       measure_result = 0;
+    grub_uint32_t       control_result = 0;
+    grub_efi_boolean_t    verify_enable = 0;

For boolean, initialize with true/false

grub_efi_boolean_t verify_enable = false;

grub-core/commands/efi/tpcm.c line 78

Quoted 4 lines
grub-core/commands/efi/tpcm.c new file +4 -0
+    grub_size_t         desc_len = 0;
+
+    handles = grub_efi_locate_handle(GRUB_EFI_BY_PROTOCOL, &c2p_guid, NULL, &num_handles);
+    if (handles && (num_handles > 0))

For pointers, check like handles != NULL. Please follow every where.

grub-core/commands/efi/tpcm.c line 85

Quoted 7 lines
grub-core/commands/efi/tpcm.c new file +7 -0
+    {
+        struct c2p_protocol *c2p;
+
+        grub_c2p_handle = handles[0];
+        grub_dprintf ("tpcm", "measue memory addr 0x%lx size 0x%lx  \n", addr, size);
+        c2p = grub_efi_open_protocol(grub_c2p_handle, &c2p_guid,
+                                      GRUB_EFI_OPEN_PROTOCOL_GET_PROTOCOL);

Use space after function name when calling and correct the indentation

c2p = grub_efi_open_protocol (grub_c2p_handle, &c2p_guid, GRUB_EFI_OPEN_PROTOCOL_GET_PROTOCOL);

grub-core/commands/efi/tpcm.c line 86

Quoted 1 line
grub-core/commands/efi/tpcm.c new file +1 -0
+        if (c2p)

If (c2p != NULL)

grub-core/commands/efi/tpcm.c line 89

Quoted 3 lines
grub-core/commands/efi/tpcm.c new file +3 -0
+        {
+            verify_enable = c2p->verify_is_enabled (c2p);
+            if (verify_enable)

For boolean, use true or false check

if (verify_enable == true)

grub-core/commands/efi/tpcm.c line 98

Quoted 9 lines
grub-core/commands/efi/tpcm.c new file +9 -0
+            {
+                struct addr_range range;
+                grub_efi_status_t status = 0;
+                grub_uint32_t stage = STAGE_INVALID;
+
+                range.start  = addr;
+                range.length = size;
+
+                stage = get_tpcm_stage();

Use space after function name

stage = get_tpcm_stage ();

grub-core/commands/efi/tpcm.c line 101

Quoted 3 lines
grub-core/commands/efi/tpcm.c new file +3 -0
+                if (stage != STAGE_INVALID)
+                {
+                    desc_len = grub_strlen(desc) + 1;

same space issue here

desc_len = grub_strlen (desc) + 1;

Quoted 9 lines
grub-core/commands/efi/tpcm.c new file +9 -0
+                    status = c2p->verify_raw (c2p, stage, (grub_uint64_t)desc, desc_len, 1, &range, &measure_result, &control_result);
+                    if ((!status) && ((control_result & MEASURE_ACTION_MASK) == 0) )
+                    {
+                        grub_dprintf ("tpcm", "verify_raw success. stage[%d]desc:[%s]\n", stage, desc);
+                        test_c2p_err = GRUB_ERR_NONE;
+                    }
+                    else
+                    {
+                        grub_dprintf ("tpcm", "verify_raw error\n");

grub-core/commands/efi/tpcm.c line 120

Quoted 10 lines
grub-core/commands/efi/tpcm.c new file +10 -0
+                        while(1) 
+                        {
+                            grub_error (GRUB_ERR_TPCM_VERIFY, "tpcm verify error. stage[%d]desc[%s]\n", stage, desc);
+                            asm volatile ("hlt");
+                        }
+                    }
+                }
+                else {
+                    grub_dprintf ("tpcm", "invalid stage\n");
+                }

Don’t need braces for single statement

else
grub_dprintf ("tpcm", "invalid stage\n");

grub-core/commands/efi/tpcm.c line 122

Quoted 2 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+
+                update_measured_id();

same space issue here
update_measured_id ();

grub-core/commands/efi/tpcm.c line 128

Quoted 7 lines
grub-core/commands/efi/tpcm.c new file +6 -0
+
+            }
+            else {
+                grub_dprintf ("tpcm", "image verify not enabled\n");
+                test_c2p_err = GRUB_ERR_NONE;
+            }

Use braces like below
else
{
grub_dprintf ("tpcm", "image verify not enabled\n”); test_c2p_err = GRUB_ERR_NONE;
}

Quoted 7 lines
grub-core/commands/efi/tpcm.c new file +7 -0
+        }
+        else
+            grub_dprintf ("tpcm", "open c2p protocol failed\n");
+    }
+    else
+    {
+        /* keep compatible with non-measurement-support bios. */

grub-core/commands/efi/tpcm.c line 145

Quoted 10 lines
grub-core/commands/efi/tpcm.c new file +10 -0
+        grub_dprintf ("tpcm", "not found C2P protocol\n");
+        test_c2p_err = GRUB_ERR_NONE;
+    }
+
+    return test_c2p_err;
+}
+
+/*
+    grub_tpcm_measure_memory:
+ */

Use single line comments /* grub_tpcm_measure_memory */

grub-core/commands/efi/tpcm.c line 146

Quoted 1 line
grub-core/commands/efi/tpcm.c new file +1 -0
+grub_err_t grub_tpcm_measure_memory(void *context, grub_addr_t buf, grub_size_t size)

same space and new line issue here

grub_err_t
grub_tpcm_measure_memory (void *context, grub_addr_t buf, grub_size_t size)

grub-core/commands/efi/tpcm.c line 148

Quoted 2 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+{
+    char *p_context = (char *)context;

Use space like below

char *p_context = (char *) context;

grub-core/commands/efi/tpcm.c line 153

Quoted 5 lines
grub-core/commands/efi/tpcm.c new file +5 -0
+    char *p, *p_desc;
+    char tmp[TPCM_MAX_BUF_SIZE] = {'0'};
+    enum grub_file_type type;
+
+    if (!p_context)

Use p_context == NULL

grub-core/commands/efi/tpcm.c line 156

Quoted 4 lines
grub-core/commands/efi/tpcm.c new file +3 -0
+        return GRUB_ERR_BUG;
+
+    p = grub_strchr(p_context, '|');

same space issue here
p = grub_strchr (p_context, '|');

grub-core/commands/efi/tpcm.c line 158

Quoted 2 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+    p_desc = p + 1;
+    grub_memcpy(tmp, p_context, (p-p_context));

same space issue here
grub_memcpy (tmp, p_context, (p - p_context));

grub-core/commands/efi/tpcm.c line 159

Quoted 1 line
grub-core/commands/efi/tpcm.c new file +1 -0
+    type = grub_strtoul(tmp, 0, 10);

same space issue here

type = grub_strtoul (tmp, 0, 10);

grub-core/commands/efi/tpcm.c line 161

Quoted 2 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+
+    return measure_memory(type, p_desc, buf, size);

same space issue here
return measure_memory (type, p_desc, buf, size);

Quoted 28 lines
grub-core/commands/efi/tpcm.c new file +2 -0
+}
+
include/grub/efi/tpcm.h new file +20 -0
new file mode 100644
index 000000000..a4e0c765a
@@ -0,0 +1,60 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef GRUB_EFI_TPCM_HEADER
+#define GRUB_EFI_TPCM_HEADER 1

include/grub/efi/tpcm.h line 30

Quoted 10 lines
include/grub/efi/tpcm.h new file +10 -0
+
+#include <grub/file.h>
+#include <grub/efi/api.h>
+#include <grub/efi/efi.h>
+
+#define C2PGUID         {0xf89ab5cd, 0x2829, 0x422f, {0xa5, 0xf3, 0x03, 0x28, 0xe0, 0x6c, 0xfc, 0xbb}}
+#define MEASURE_RESULT_MASK          (0xff00)
+#define MEASURE_RESULT_SHIFT         (16)
+#define MEASURE_ACTION_MASK          (0x1)
+#define TPCM_MAX_BUF_SIZE            128

My suggestion to align it like below

#define C2PGUID {0xf89ab5cd, 0x2829, 0x422f, {0xa5, 0xf3, 0x03, 0x28, 0xe0, 0x6c, 0xfc, 0xbb}}
#define MEASURE_RESULT_MASK (0xff00)
#define MEASURE_RESULT_SHIFT (16)
#define MEASURE_ACTION_MASK (0x1)
#define TPCM_MAX_BUF_SIZE 128

include/grub/efi/tpcm.h line 35

Quoted 6 lines
include/grub/efi/tpcm.h new file +5 -0
+
+/*
+   stage layout:
+     2000~2999: +1 every time
+*/

Follow the multiline comments

include/grub/efi/tpcm.h line 39

Quoted 3 lines
include/grub/efi/tpcm.h new file +3 -0
+#define STAGE_START      2000
+#define STAGE_END        2999
+#define STAGE_INVALID    3000

My suggestion to align it like below

#define STAGE_START 2000
#define STAGE_END 2999
#define STAGE_INVALID 3000

Quoted 9 lines
include/grub/efi/tpcm.h new file +9 -0
+
+struct addr_range {
+    grub_uint64_t start;
+    grub_uint64_t length;
+};
+struct c2p_protocol {
+    grub_efi_status_t (__grub_efi_api *verify_raw) (struct c2p_protocol *this,
+                                    grub_uint32_t measure_stage,
+                                    grub_uint64_t image_info,

include/grub/efi/tpcm.h line 58

Quoted 10 lines
include/grub/efi/tpcm.h new file +10 -0
+                                    grub_uint32_t image_info_size,
+                                    grub_uint32_t num_addr_range,
+                                    struct addr_range ranges[],
+                                    grub_uint32_t *measure_result,
+                                    grub_uint32_t *control_result);
+    grub_efi_boolean_t (__grub_efi_api *verify_is_enabled)(struct c2p_protocol *this);
+};
+typedef struct c2p_protocol c2p_protocol_t;
+
+grub_err_t grub_tpcm_measure_memory(void *context, grub_addr_t buf, grub_size_t size);

Use the space after the function name and newline after return type when declaring or define it.

grub_err_t
grub_tpcm_measure_memory (void *context, grub_addr_t buf, grub_size_t size);

include/grub/err.h typedef enum · line 79

Quoted 13 lines
include/grub/efi/tpcm.h new file +2 -0
+
+#endif
include/grub/err.h +2 -1
index 202fa8a7a..4d2756097 100644
@@ -75,7 +75,8 @@ typedef enum
    GRUB_ERR_BAD_SIGNATURE,
    GRUB_ERR_BAD_FIRMWARE,
    GRUB_ERR_STILL_REFERENCED,
-    GRUB_ERR_RECURSION_DEPTH
+    GRUB_ERR_RECURSION_DEPTH,
+    GRUB_ERR_TPCM_VERIFY

Correct the indentation here

Quoted 6 lines
include/grub/err.h +0 -0
  }
 grub_err_t;
 
Signature · 1 line
2.17.1

Thanks,
Sudhakar

Quoted 5 lines

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

#7 lore raw

Re: [PATCH v2 2/2] efi/tpcm: Add complete support of TPCM module

In reply to chench246
Quoted 64 lines · On 27 Jun 2025, at 1:12 PM, chench246 <[email protected]> wrote:

TPCM(Trusted Platform Control Module) is a Chinese standard and has similar function to tpm, but tpcm adds the function of active monitoring and control to the system. It can realize active startup measurement when the system starts,as well as dynamic measurement and monitoring when the program is running, further enhance the security of the system.

---
grub-core/Makefile.core.def | 7 +++
grub-core/commands/tpcm.c | 99 +++++++++++++++++++++++++++++++++++++

2 files changed, 106 insertions(+)

create mode 100755 grub-core/commands/tpcm.c

grub-core/Makefile.core.def +7 -0
index 24e8c8437..fc31dbca4 100644
@@ -2600,6 +2600,13 @@ module = {
  cppflags = '-I$(srcdir)/lib/tss2 -I$(srcdir)/lib/libtasn1-grub';
 };
 
+module = {
+  name = tpcm;
+  common = commands/tpcm.c;
+  efi = commands/efi/tpcm.c;
+  enable = x86_64_efi;
+};
+
 module = {
  name = tr;
  common = commands/tr.c;
grub-core/commands/tpcm.c new file +23 -0
new file mode 100755
index 000000000..1c8bd77ce
@@ -0,0 +1,99 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2018  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *  Core TPCM support code.
+ */
+
+#include <grub/err.h>
+#include <grub/verify.h>
+#include <grub/dl.h>

grub-core/commands/tpcm.c line 33

Quoted 10 lines
grub-core/commands/tpcm.c new file +10 -0
+#include <grub/efi/tpcm.h>
+
+GRUB_MOD_LICENSE ("GPLv3+");
+
+static char context_buf[TPCM_MAX_BUF_SIZE];
+
+static grub_err_t grub_tpcm_verify_init(grub_file_t io,
+                      enum grub_file_type type,
+                      void **context, 
+                      enum grub_verify_flags *flags)

Hi hao chen,

Please use the single space after function name and newline after return type when declare and defining function. Correct it every where.

static grub_err_t
grub_tpcm_verify_init (grub_file_t io, enum grub_file_type type, void **context,
enum grub_verify_flags *flags)

grub-core/commands/tpcm.c line 35

Quoted 2 lines
grub-core/commands/tpcm.c new file +2 -0
+{
+    grub_memset(context_buf, 0, TPCM_MAX_BUF_SIZE);

Use single space after function name when calling the function

grub_memset (context_buf, 0, TPCM_MAX_BUF_SIZE);

grub-core/commands/tpcm.c line 36

Quoted 1 line
grub-core/commands/tpcm.c new file +1 -0
+    grub_snprintf(context_buf, TPCM_MAX_BUF_SIZE, "%d|%s", (type & GRUB_FILE_TYPE_MASK), io->name);

Use space before ()

grub-core/commands/tpcm.c line 43

Quoted 7 lines
grub-core/commands/tpcm.c new file +7 -0
+    *context = context_buf;
+    *flags |= GRUB_VERIFY_FLAGS_SINGLE_CHUNK;
+
+    return GRUB_ERR_NONE;
+}
+
+static grub_err_t grub_tpcm_verify_write(void *context, void *buf , grub_size_t size )

Use it like
static grub_err_t
grub_tpcm_verify_write (void *context, void *buf , grub_size_t size )

grub-core/commands/tpcm.c line 48

Quoted 5 lines
grub-core/commands/tpcm.c new file +5 -0
+{
+    return grub_tpcm_measure_memory(context, (grub_addr_t)buf, size);
+}
+
+static grub_err_t grub_tpcm_verify_string (char *str, enum grub_verify_string_type type)

Use it like
static grub_err_t
grub_tpcm_verify_string (char *str, enum grub_verify_string_type type)

Quoted 9 lines
grub-core/commands/tpcm.c new file +9 -0
+{
+    const char *prefix = NULL;
+    char *description, *context;
+    grub_err_t status;
+
+    switch (type)
+    {
+    case GRUB_VERIFY_KERNEL_CMDLINE:
+      prefix = "kernel_cmdline: ";

grub-core/commands/tpcm.c line 67

Quoted 10 lines
grub-core/commands/tpcm.c new file +10 -0
+      break;
+    case GRUB_VERIFY_MODULE_CMDLINE:
+      prefix = "module_cmdline: ";
+      break;
+    case GRUB_VERIFY_COMMAND:
+      prefix = "grub_cmd: ";
+      break;
+    }
+
+    context = grub_zalloc(grub_strlen (str) + grub_strlen (prefix) + 1 + 4);  /* 4 for type */

Use space before () like
context = grub_zalloc (grub_strlen (str) + grub_strlen (prefix) + 1 + 4); /* 4 for type */

grub-core/commands/tpcm.c line 68

Quoted 1 line
grub-core/commands/tpcm.c new file +1 -0
+    if (!context)

Use context != NULL

grub-core/commands/tpcm.c line 74

Quoted 6 lines
grub-core/commands/tpcm.c new file +6 -0
+        return grub_errno;
+
+    grub_snprintf(context, 4, "%d|", (type & GRUB_FILE_TYPE_MASK));
+    description = context + grub_strlen(context);
+    grub_memcpy(description, prefix, grub_strlen (prefix));
+    grub_memcpy(description + grub_strlen (prefix), str, grub_strlen (str) + 1);

Use space before () for all the above functions

grub-core/commands/tpcm.c line 76

Quoted 2 lines
grub-core/commands/tpcm.c new file +2 -0
+
+    status = grub_tpcm_measure_memory(context, (grub_addr_t)str, grub_strlen(str));

Use space before () like
status = grub_tpcm_measure_memory (context, (grub_addr_t) str, grub_strlen (str));

Quoted 6 lines
grub-core/commands/tpcm.c new file +6 -0
+
+    grub_free(context);
+
+    return status;
+}
+

grub-core/commands/tpcm.c line 92

Quoted 10 lines
grub-core/commands/tpcm.c new file +10 -0
+struct grub_file_verifier grub_tpcm_verifier = {
+    .name = "tpcm",
+    .init  = grub_tpcm_verify_init,
+    .write = grub_tpcm_verify_write,
+    .verify_string = grub_tpcm_verify_string,
+};
+
+GRUB_MOD_INIT (tpcm)
+{
+    grub_verifier_register(&grub_tpcm_verifier);

Use space before () like
grub_verifier_register (&grub_tpcm_verifier);

grub-core/commands/tpcm.c line 97

Quoted 5 lines
grub-core/commands/tpcm.c new file +5 -0
+}
+
+GRUB_MOD_FINI (tpcm)
+{
+    grub_verifier_unregister(&grub_tpcm_verifier);

Use space before () like
grub_verifier_unregister (&grub_tpcm_verifier);

Quoted 5 lines
grub-core/commands/tpcm.c new file +2 -0
+}
+
Signature · 1 line
2.17.1

Thanks,
Sudhakar

Quoted 4 lines

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel