Skip to contentSkip to conversation

kbuild: do not pass -r to genksyms when *.symref does not exist

PATCH In review Masahiro Yamada 2 participants 4 messages Nov 11, 2024 – Nov 14, 2024 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 kbuild: do not pass -r to genksyms when *.symref does not exist

There is no need to pass '-r /dev/null', which is no-op.

---

 scripts/Makefile.build | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/Makefile.build +1 -1
index 8f423a1faf50..36eae845a3e3 100644
@@ -110,7 +110,7 @@ $(obj)/%.i: $(obj)/%.c FORCE
 genksyms = scripts/genksyms/genksyms		\
 	$(if $(1), -T $(2))			\
 	$(if $(KBUILD_PRESERVE), -p)		\
-	-r $(or $(wildcard $(2:.symtypes=.symref)), /dev/null)
+	$(addprefix -r , $(wildcard $(2:.symtypes=.symref)))
 
 # These mirror gensymtypes_S and co below, keep them in synch.
 cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 2/2 kbuild: remove support for single %.symtypes build rule

This rule is unnecessary because you can generate foo/bar.symtypes as a side effect using:

  $ make KBUILD_SYMTYPES=1 foo/bar.o

While compiling *.o is slower than preprocessing, the impact is negligible. I prioritize keeping the code simpler.

---

 Makefile               |  2 +-
 scripts/Makefile.build | 20 +++-----------------
 2 files changed, 4 insertions(+), 18 deletions(-)
Makefile +1 -1
index 8dceb6830486..93fe5d2d6861 100644
@@ -276,7 +276,7 @@ no-dot-config-targets := $(clean-targets) \
 			 outputmakefile rustavailable rustfmt rustfmtcheck
 no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \
 			  image_name
-single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/
+single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %/
 
 config-build	:=
 mixed-build	:=
scripts/Makefile.build +3 -17
index 36eae845a3e3..1a0d3078dac7 100644
@@ -108,19 +108,13 @@ $(obj)/%.i: $(obj)/%.c FORCE
 	$(call if_changed_dep,cpp_i_c)
 
 genksyms = scripts/genksyms/genksyms		\
-	$(if $(1), -T $(2))			\
+	$(if $(KBUILD_SYMTYPES), -T $(@:.o=.symtypes))	\
 	$(if $(KBUILD_PRESERVE), -p)		\
-	$(addprefix -r , $(wildcard $(2:.symtypes=.symref)))
+	$(addprefix -r , $(wildcard $(@:.o=.symref)))
 
 # These mirror gensymtypes_S and co below, keep them in synch.
 cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms)
 
-quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
-      cmd_cc_symtypes_c = $(call cmd_gensymtypes_c,true,$@) >/dev/null
-
-$(obj)/%.symtypes : $(obj)/%.c FORCE
-	$(call cmd,cc_symtypes_c)
-
 # LLVM assembly
 # Generate .ll files from .c
 quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
@@ -158,8 +152,7 @@ ifdef CONFIG_MODVERSIONS
 
 gen_symversions =								\
 	if $(NM) $@ 2>/dev/null | grep -q ' __export_symbol_'; then		\
-		$(call cmd_gensymtypes_$(1),$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
-			>> $(dot-target).cmd;					\
+		$(cmd_gensymtypes_$1) >> $(dot-target).cmd;			\
 	fi
 
 cmd_gen_symversions_c =	$(call gen_symversions,c)
@@ -323,13 +316,6 @@ cmd_gensymtypes_S =                                                         \
      $(NM) $@ | sed -n 's/.* __export_symbol_\(.*\)/EXPORT_SYMBOL(\1);/p' ; } | \
     $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | $(genksyms)
 
-quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
-      cmd_cc_symtypes_S = $(call cmd_gensymtypes_S,true,$@) >/dev/null
-
-$(obj)/%.symtypes : $(obj)/%.S FORCE
-	$(call cmd,cc_symtypes_S)
-
-
 quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
 cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
 
Signature · 1 line
2.43.0
Reviewed-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] kbuild: remove support for single %.symtypes build rule

Quoted 8 lines · Masahiro Yamada

This rule is unnecessary because you can generate foo/bar.symtypes as a side effect using:

  $ make KBUILD_SYMTYPES=1 foo/bar.o

While compiling *.o is slower than preprocessing, the impact is negligible. I prioritize keeping the code simpler.

Quoted 6 lines

---

 Makefile               |  2 +-
 scripts/Makefile.build | 20 +++-----------------
 2 files changed, 4 insertions(+), 18 deletions(-)

thanks, looks good to me.

Reviewed-by on v1 1/2
#3 lore raw
In reply to Masahiro Yamada
Quoted 24 lines · Masahiro Yamada

There is no need to pass '-r /dev/null', which is no-op.

---

 scripts/Makefile.build | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/Makefile.build +1 -1
index 8f423a1faf50..36eae845a3e3 100644
@@ -110,7 +110,7 @@ $(obj)/%.i: $(obj)/%.c FORCE
 genksyms = scripts/genksyms/genksyms		\
 	$(if $(1), -T $(2))			\
 	$(if $(KBUILD_PRESERVE), -p)		\
-	-r $(or $(wildcard $(2:.symtypes=.symref)), /dev/null)
+	$(addprefix -r , $(wildcard $(2:.symtypes=.symref)))
 
 # These mirror gensymtypes_S and co below, keep them in synch.
 cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms)
Signature · 1 line
2.43.0