nvme: remove CONFIG_NVME_MULTIPATH
cover nvme: remove CONFIG_NVME_MULTIPATH
Device-mapper multipath will no longer be operating on NVMe devices, so the nvme.core.multipath module parameter can be removed. This series also removes the CONFIG_NVME_MULTIPATH kconfig option.
This was tested on the nvme-6.13 branch (currently showing version 6.12-rc4), with particular attention to tests nvme/033-036, and nvme/039. These tests still passed after the removal of the CONFIG_NVME_MULTIPATH parameter (the tests use an "rc" function, _require_test_dev_is_not_nvme_multipath, that checks for "nvme-subsystem" in $TEST_DEV_SYSFS, so they do not check for the existence of CONFIG_NVME_MULTIPATH).
The blktests test nvme/005 checks for the module parameter value of "nvme_core multipath", but this test gets skipped after this patch.
Bryan Gurney (1):
nvme: always enable multipath
arch/loongarch/configs/loongson3_defconfig | 1 - arch/powerpc/configs/skiroot_defconfig | 1 - drivers/nvme/host/Kconfig | 9 -- drivers/nvme/host/Makefile | 3 +- drivers/nvme/host/core.c | 17 +--- drivers/nvme/host/ioctl.c | 3 +- drivers/nvme/host/multipath.c | 10 +-- drivers/nvme/host/nvme.h | 97 +--------------------- drivers/nvme/host/sysfs.c | 6 -- 9 files changed, 7 insertions(+), 140 deletions(-)
Signature · 1 line
2.45.2