Skip to contentSkip to conversation

FAILED: patch "[PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for" failed to apply to 6.6-stable tree

PATCH In review [email protected] 3 participants 3 messages Dec 2, 2024

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x b909df18ce2a998afef81d58bbd1a05dc0788c40
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024120200-dangling-delegate-dfab@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b909df18ce2a998afef81d58bbd1a05dc0788c40 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Beno=C3=AEt=20Sevens?= <[email protected]>
Date: Wed, 20 Nov 2024 12:41:44 +0000
Subject: [PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for
Extigy and Mbox devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config.

This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration.

sound/usb/quirks.c +21 -6
index cbfbb064a9c2..8bc959b60be3 100644
@@ -555,6 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
 static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 
 	if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
@@ -566,10 +567,14 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
 		if (err < 0)
 			dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
 		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-				&dev->descriptor, sizeof(dev->descriptor));
-		config = dev->actconfig;
+				&new_device_descriptor, sizeof(new_device_descriptor));
 		if (err < 0)
 			dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+		if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+			dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+				new_device_descriptor.bNumConfigurations);
+		else
+			memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 		err = usb_reset_configuration(dev);
 		if (err < 0)
 			dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
@@ -901,6 +906,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
 static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 	u8 bootresponse[0x12];
 	int fwsize;
@@ -936,10 +942,14 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
 	dev_dbg(&dev->dev, "device initialised!\n");
 
 	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-		&dev->descriptor, sizeof(dev->descriptor));
-	config = dev->actconfig;
+		&new_device_descriptor, sizeof(new_device_descriptor));
 	if (err < 0)
 		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+	if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+		dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+			new_device_descriptor.bNumConfigurations);
+	else
+		memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 
 	err = usb_reset_configuration(dev);
 	if (err < 0)
@@ -1249,6 +1259,7 @@ static void mbox3_setup_defaults(struct usb_device *dev)
 static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 	int descriptor_size;
 
@@ -1262,10 +1273,14 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
 	dev_dbg(&dev->dev, "MBOX3: device initialised!\n");
 
 	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-		&dev->descriptor, sizeof(dev->descriptor));
-	config = dev->actconfig;
+		&new_device_descriptor, sizeof(new_device_descriptor));
 	if (err < 0)
 		dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);
+	if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+		dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n",
+			new_device_descriptor.bNumConfigurations);
+	else
+		memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 
 	err = usb_reset_configuration(dev);
 	if (err < 0)
#1 lore raw

PATCH 1/1 ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices

A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config.

This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
(cherry picked from commit b909df18ce2a998afef81d58bbd1a05dc0788c40)
---
 sound/usb/quirks.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)
sound/usb/quirks.c +21 -6
index 37211ad31ec8..30a4d2deefda 100644
@@ -555,6 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
 static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 
 	if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
@@ -566,10 +567,14 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
 		if (err < 0)
 			dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
 		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-				&dev->descriptor, sizeof(dev->descriptor));
-		config = dev->actconfig;
+				&new_device_descriptor, sizeof(new_device_descriptor));
 		if (err < 0)
 			dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+		if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+			dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+				new_device_descriptor.bNumConfigurations);
+		else
+			memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 		err = usb_reset_configuration(dev);
 		if (err < 0)
 			dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
@@ -901,6 +906,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
 static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 	u8 bootresponse[0x12];
 	int fwsize;
@@ -936,10 +942,14 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
 	dev_dbg(&dev->dev, "device initialised!\n");
 
 	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-		&dev->descriptor, sizeof(dev->descriptor));
-	config = dev->actconfig;
+		&new_device_descriptor, sizeof(new_device_descriptor));
 	if (err < 0)
 		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+	if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+		dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+			new_device_descriptor.bNumConfigurations);
+	else
+		memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 
 	err = usb_reset_configuration(dev);
 	if (err < 0)
@@ -1253,6 +1263,7 @@ static void mbox3_setup_48_24_magic(struct usb_device *dev)
 static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
 {
 	struct usb_host_config *config = dev->actconfig;
+	struct usb_device_descriptor new_device_descriptor;
 	int err;
 	int descriptor_size;
 
@@ -1266,10 +1277,14 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
 	dev_dbg(&dev->dev, "device initialised!\n");
 
 	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
-		&dev->descriptor, sizeof(dev->descriptor));
-	config = dev->actconfig;
+		&new_device_descriptor, sizeof(new_device_descriptor));
 	if (err < 0)
 		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+	if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+		dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+			new_device_descriptor.bNumConfigurations);
+	else
+		memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
 
 	err = usb_reset_configuration(dev);
 	if (err < 0)
Signature · 1 line
2.47.0.338.g60cca15819-goog
maintainer
#2 lore raw

Re: [PATCH 6.6.y] ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices

[ Sasha's backport helper bot ]

Hi,

Found matching upstream commit: b909df18ce2a998afef81d58bbd1a05dc0788c40

Status in newer kernel trees:
6.12.y | Not found
6.11.y | Not found
6.6.y | Not found

Note: The patch differs from the upstream commit:
---
1: b909df18ce2a9 ! 1: 1b0dc2e079fb8 ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
@@ Commit message
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.

- Signed-off-by: Benoît Sevens <[email protected]>

+ (cherry picked from commit b909df18ce2a998afef81d58bbd1a05dc0788c40)
+ Signed-off-by: Benoît Sevens <[email protected]>

## sound/usb/quirks.c ##
@@ sound/usb/quirks.c: int snd_usb_create_quirk(struct snd_usb_audio *chip,
@@ sound/usb/quirks.c: static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)

err = usb_reset_configuration(dev);
if (err < 0)
-@@ sound/usb/quirks.c: static void mbox3_setup_defaults(struct usb_device *dev) +@@ sound/usb/quirks.c: static void mbox3_setup_48_24_magic(struct usb_device *dev)
static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
@@ sound/usb/quirks.c: static void mbox3_setup_defaults(struct usb_device *dev)
int descriptor_size;

@@ sound/usb/quirks.c: static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
- dev_dbg(&dev->dev, "MBOX3: device initialised!\n");
+ dev_dbg(&dev->dev, "device initialised!\n");

err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
- dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);
+ dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
-+ dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n",
++ dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.6.y        |  Success    |  Success   |