Skip to contentSkip to conversation

configs: mvebu_espressobin_ultra-88f3720_defconfig: enable full bootflow functionality

PATCH In review [email protected] 2 participants 3 messages Dec 6, 2024 – Jan 28, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs: mvebu_espressobin_ultra-88f3720_defconfig: enable full bootflow functionality

From: Ben Schneider <[email protected]>

This appliance has multiple devices from which it can boot. Enable full bootflow functionality so users can choose a non-default boot device.

---

 configs/mvebu_espressobin_ultra-88f3720_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/mvebu_espressobin_ultra-88f3720_defconfig +1 -0
index aa9026acc3..6f1a66f5f1 100644
@@ -16,6 +16,7 @@ CONFIG_SYS_LOAD_ADDR=0x6000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_BOOTSTD_FULL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_PREBOOT=y
Signature · 1 line
2.47.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 6 lines · On 06.12.24 22:09, [email protected] wrote:

From: Ben Schneider <[email protected]>

This appliance has multiple devices from which it can boot. Enable full bootflow functionality so users can choose a non-default boot device.

Thanks,
Stefan

Quoted 10 lines

---

  configs/mvebu_espressobin_ultra-88f3720_defconfig | 1 +
  1 file changed, 1 insertion(+)
configs/mvebu_espressobin_ultra-88f3720_defconfig +0 -0
index aa9026acc3..6f1a66f5f1 100644

configs/mvebu_espressobin_ultra-88f3720_defconfig CONFIG_SYS_LOAD_ADDR=0x6000000 · line 22

Quoted 7 lines
configs/mvebu_espressobin_ultra-88f3720_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_SYS_LOAD_ADDR=0x6000000
  CONFIG_PCI=y
  CONFIG_AHCI=y
  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_BOOTSTD_FULL=y
  CONFIG_DISTRO_DEFAULTS=y
  CONFIG_OF_BOARD_SETUP=y
  CONFIG_USE_PREBOOT=y

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#2 lore raw
In reply to [email protected]
Quoted 6 lines · On 06.12.24 22:09, [email protected] wrote:

From: Ben Schneider <[email protected]>

This appliance has multiple devices from which it can boot. Enable full bootflow functionality so users can choose a non-default boot device.

Applied to u-boot-marvell/master

Thanks,
Stefan

Quoted 10 lines

---

  configs/mvebu_espressobin_ultra-88f3720_defconfig | 1 +
  1 file changed, 1 insertion(+)
configs/mvebu_espressobin_ultra-88f3720_defconfig +0 -0
index aa9026acc3..6f1a66f5f1 100644

configs/mvebu_espressobin_ultra-88f3720_defconfig CONFIG_SYS_LOAD_ADDR=0x6000000 · line 22

Quoted 7 lines
configs/mvebu_espressobin_ultra-88f3720_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_SYS_LOAD_ADDR=0x6000000
  CONFIG_PCI=y
  CONFIG_AHCI=y
  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_BOOTSTD_FULL=y
  CONFIG_DISTRO_DEFAULTS=y
  CONFIG_OF_BOARD_SETUP=y
  CONFIG_USE_PREBOOT=y

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]