Skip to contentSkip to conversation

riscv: iommu: Add shutdown callback for kexec

PATCH Superseded Xu Lu 1 participant 3 messages Dec 13, 2024

Subsystems (3)
lore
Share & tools
lore

Xu Lu

author
#0 lore raw

cover riscv: iommu: Add shutdown callback for kexec

After kexec, the newly booted kernel can not initialize iommu driver successfully as no one resets iommu state before kexec.

This patch series supplies shutdown callback for iommu pmu driver. The shutdown callback resets necessary registers so that newly booted kernel can pass riscv_iommu_init_check() after kexec.

Xu Lu (2):
iommu/riscv: Empty iommu queue before enabling it iommu/riscv: Add shutdown function for iommu driver

 drivers/iommu/riscv/iommu-pci.c      |  8 ++++++++
 drivers/iommu/riscv/iommu-platform.c |  6 ++++++
 drivers/iommu/riscv/iommu.c          | 12 ++++++++++--
 drivers/iommu/riscv/iommu.h          |  1 +
 4 files changed, 25 insertions(+), 2 deletions(-)
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH 1/2 iommu/riscv: Empty iommu queue before enabling it

Changing cqen/fqen/pqen from 0 to 1 sets the cqh/fqt/pqt registers to 0. But the cqt/fqh/pqh registers are left unmodified. This commit resets cqt/fqh/pqh registers to ensure corresponding queues are empty before being enabled during initialization.

---
 drivers/iommu/riscv/iommu.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/iommu/riscv/iommu.c +6 -0
index 8a05def774bd..84806724f568 100644
@@ -240,6 +240,12 @@ static int riscv_iommu_queue_enable(struct riscv_iommu_device *iommu,
 		return rc;
 	}
 
+	/* Empty queue before enabling it */
+	if (queue->qid == RISCV_IOMMU_INTR_CQ)
+		riscv_iommu_writel(queue->iommu, Q_TAIL(queue), 0);
+	else
+		riscv_iommu_writel(queue->iommu, Q_HEAD(queue), 0);
+
 	/*
 	 * Enable queue with interrupts, clear any memory fault if any.
 	 * Wait for the hardware to acknowledge request and activate queue
Signature · 1 line
2.20.1
author
#2 lore raw

PATCH 2/2 iommu/riscv: Add shutdown function for iommu driver

In reply to Xu Lu

This commit supplies shutdown callback for iommu pmu driver. The shutdown callback resets necessary registers so that newly booted kernel can pass riscv_iommu_init_check() after kexec. Also, the shutdown callback resets iommu mode to bare instead of off so that new kernel can still use PCIE devices even when CONFIG_RISCV_IOMMU is not enabled.

---
 drivers/iommu/riscv/iommu-pci.c      | 8 ++++++++
 drivers/iommu/riscv/iommu-platform.c | 6 ++++++
 drivers/iommu/riscv/iommu.c          | 6 ++++--
 drivers/iommu/riscv/iommu.h          | 1 +
 4 files changed, 19 insertions(+), 2 deletions(-)
drivers/iommu/riscv/iommu-pci.c +8 -0
index c7a89143014c..d82d2b00904c 100644
@@ -101,6 +101,13 @@ static void riscv_iommu_pci_remove(struct pci_dev *pdev)
 	riscv_iommu_remove(iommu);
 }
 
+static void riscv_iommu_pci_shutdown(struct pci_dev *pdev)
+{
+	struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev);
+
+	riscv_iommu_disable(iommu);
+}
+
 static const struct pci_device_id riscv_iommu_pci_tbl[] = {
 	{PCI_VDEVICE(REDHAT, PCI_DEVICE_ID_REDHAT_RISCV_IOMMU), 0},
 	{PCI_VDEVICE(RIVOS, PCI_DEVICE_ID_RIVOS_RISCV_IOMMU_GA), 0},
@@ -112,6 +119,7 @@ static struct pci_driver riscv_iommu_pci_driver = {
 	.id_table = riscv_iommu_pci_tbl,
 	.probe = riscv_iommu_pci_probe,
 	.remove = riscv_iommu_pci_remove,
+	.shutdown = riscv_iommu_pci_shutdown,
 	.driver = {
 		.suppress_bind_attrs = true,
 	},
drivers/iommu/riscv/iommu-platform.c +6 -0
index 382ba2841849..62c40b99cf62 100644
@@ -74,6 +74,11 @@ static void riscv_iommu_platform_remove(struct platform_device *pdev)
 	riscv_iommu_remove(dev_get_drvdata(&pdev->dev));
 };
 
+static void riscv_iommu_platform_shutdown(struct platform_device *pdev)
+{
+	riscv_iommu_disable(dev_get_drvdata(&pdev->dev));
+};
+
 static const struct of_device_id riscv_iommu_of_match[] = {
 	{.compatible = "riscv,iommu",},
 	{},
@@ -82,6 +87,7 @@ static const struct of_device_id riscv_iommu_of_match[] = {
 static struct platform_driver riscv_iommu_platform_driver = {
 	.probe = riscv_iommu_platform_probe,
 	.remove = riscv_iommu_platform_remove,
+	.shutdown = riscv_iommu_platform_shutdown,
 	.driver = {
 		.name = "riscv,iommu",
 		.of_match_table = riscv_iommu_of_match,
drivers/iommu/riscv/iommu.c +4 -2
index 84806724f568..670b4302aca8 100644
@@ -651,9 +651,11 @@ static struct riscv_iommu_dc *riscv_iommu_get_dc(struct riscv_iommu_device *iomm
  * This is best effort IOMMU translation shutdown flow.
  * Disable IOMMU without waiting for hardware response.
  */
-static void riscv_iommu_disable(struct riscv_iommu_device *iommu)
+void riscv_iommu_disable(struct riscv_iommu_device *iommu)
 {
-	riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP, 0);
+	riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_DDTP,
+			   FIELD_PREP(RISCV_IOMMU_DDTP_IOMMU_MODE,
+				      RISCV_IOMMU_DDTP_IOMMU_MODE_BARE));
 	riscv_iommu_writel(iommu, RISCV_IOMMU_REG_CQCSR, 0);
 	riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FQCSR, 0);
 	riscv_iommu_writel(iommu, RISCV_IOMMU_REG_PQCSR, 0);
drivers/iommu/riscv/iommu.h +1 -0
index b1c4664542b4..46df79dd5495 100644
@@ -64,6 +64,7 @@ struct riscv_iommu_device {
 
 int riscv_iommu_init(struct riscv_iommu_device *iommu);
 void riscv_iommu_remove(struct riscv_iommu_device *iommu);
+void riscv_iommu_disable(struct riscv_iommu_device *iommu);
 
 #define riscv_iommu_readl(iommu, addr) \
 	readl_relaxed((iommu)->reg + (addr))
Signature · 1 line
2.20.1