Skip to contentSkip to conversation

ARM: dts: imx: Use the correct mdio pattern

PATCH Applied Fabio Estevam 2 participants 2 messages Dec 18, 2024 – Dec 30, 2024

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v2 1/1 ARM: dts: imx: Use the correct mdio pattern

From: Fabio Estevam <[email protected]>

mdio-gpio is not a valid pattern according to mdio-gpio.yaml.

Use the generic 'mdio' name to fix the following dt-schema warnings:

'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Fix the Subject.

 arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts      | 2 +-
 arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +1 -1
index 7cd17b43b4b2..06545a6052f7 100644
@@ -160,7 +160,7 @@ eeprom@0 {
 		};
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts +1 -1
index 625f9ac671ae..26eb7a9506e4 100644
@@ -37,7 +37,7 @@ usb_vbus: regulator-usb-vbus {
 		regulator-max-microvolt = <5000000>;
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +1 -1
index c1ae7c47b442..aa1adcc74019 100644
@@ -94,7 +94,7 @@ aliases {
 		mdio-gpio0 = &mdio0;
 	};
 
-	mdio0: mdio-gpio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
 			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
Signature · 1 line
2.34.1
Applied
#1 lore raw
Quoted 9 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

mdio-gpio is not a valid pattern according to mdio-gpio.yaml.

Use the generic 'mdio' name to fix the following dt-schema warnings:

'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'

Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks!