Skip to contentSkip to conversation

dt-bindings: clock: add ID for eMMC for EN7581

PATCH In review Christian Marangi 2 participants 7 messages Dec 19, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/4 dt-bindings: clock: add ID for eMMC for EN7581

Add ID for eMMC for EN7581. This is to control clock selection of eMMC between 200MHz and 150MHz.

---
Changes v3:
- Add ack tag
Changes v2:
- Drop additional define for EN7581_NUM_CLOCKS

 include/dt-bindings/clock/en7523-clk.h | 2 ++
 1 file changed, 2 insertions(+)
include/dt-bindings/clock/en7523-clk.h +2 -0
index 717d23a5e5ae..c4f8a161b981 100644
@@ -12,6 +12,8 @@
 #define EN7523_CLK_CRYPTO	6
 #define EN7523_CLK_PCIE		7
 
+#define EN7581_CLK_EMMC		8
+
 #define EN7523_NUM_CLOCKS	8
 
 #endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
Signature · 1 line
2.45.2
#1 lore raw

PATCH v3 2/4 dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -2
index c4f8a161b981..edfa64045f52 100644
@@ -14,6 +14,4 @@
 
 #define EN7581_CLK_EMMC		8
 
-#define EN7523_NUM_CLOCKS	8
-
 #endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
Signature · 1 line
2.45.2
#2 lore raw

Re: [PATCH v3 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 17 lines · Christian Marangi

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index c4f8a161b981..edfa64045f52 100644

include/dt-bindings/clock/en7523-clk.h line 17

Quoted 4 lines
include/dt-bindings/clock/en7523-clk.h +0 -1
@@ -14,6 +14,4 @@
 
 #define EN7581_CLK_EMMC		8
 
-#define EN7523_NUM_CLOCKS	8

Are you sure your patchset bisects?

Also better to arrange cleanups before new clocks added, so lack of conflict between number of clocks and new clock ID is obvious.

Best regards,
Krzysztof

#3 lore raw

Re: [PATCH v3 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 19 lines · Krzysztof Kozlowski
Quoted 18 lines · Christian Marangi

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index c4f8a161b981..edfa64045f52 100644
@@ -14,6 +14,4 @@
 
Quoted 5 lines

include/dt-bindings/clock/en7523-clk.h line 17

Quoted 3 lines
include/dt-bindings/clock/en7523-clk.h +0 -1
 #define EN7581_CLK_EMMC		8
 
-#define EN7523_NUM_CLOCKS	8

Are you sure your patchset bisects?

Well bisectability is a problem. Either this can't be dropped or the change must be shipped with the driver change.

Quoted 3 lines

Also better to arrange cleanups before new clocks added, so lack of conflict between number of clocks and new clock ID is obvious.

ok

Signature · 1 line
	Ansuel
#4 lore raw

Re: [PATCH v3 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 20 lines · Christian Marangi
Quoted 19 lines · Krzysztof Kozlowski
Quoted 18 lines · Christian Marangi

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index c4f8a161b981..edfa64045f52 100644
@@ -14,6 +14,4 @@
 
Quoted 8 lines
Quoted 5 lines

include/dt-bindings/clock/en7523-clk.h line 17

Quoted 3 lines
include/dt-bindings/clock/en7523-clk.h +0 -1
 #define EN7581_CLK_EMMC		8
 
-#define EN7523_NUM_CLOCKS	8

Are you sure your patchset bisects?

Well bisectability is a problem. Either this can't be dropped or the change must be shipped with the driver change.

No, you need to fix order of patches and maybe driver as well. There is never a problem, if done correctly (which was happening multiple times).

Please do not send non-bisectable changes, especially in hidden way we need to discover.

Best regards,
Krzysztof

#5 lore raw

PATCH v3 3/4 clk: en7523: Rework clock handling for different clock numbers

In reply to Christian Marangi

Airoha EN7581 SoC have additional clock compared to EN7523 but current driver permits to only support up to EN7523 clock numbers.

To handle this, rework the clock handling and permit to declare the clocks number in match_data and alloca clk_data based on the compatible match_data.

---
Changes v3:
- Rework num_clocks for en7523
Changes v2:
- Add this patch

 drivers/clk/clk-en7523.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/clk/clk-en7523.c +8 -6
index 495c0d607c7d..596847446b14 100644
@@ -75,6 +75,7 @@ struct en_rst_data {
 };
 
 struct en_clk_soc_data {
+	u32 num_clocks;
 	const struct clk_ops pcie_ops;
 	int (*hw_init)(struct platform_device *pdev,
 		       struct clk_hw_onecell_data *clk_data);
@@ -504,8 +505,6 @@ static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 	u32 rate;
 	int i;
 
-	clk_data->num = EN7523_NUM_CLOCKS;
-
 	for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
 		const struct en_clk_desc *desc = &en7523_base_clks[i];
 		u32 reg = desc->div_reg ? desc->div_reg : desc->base_reg;
@@ -587,8 +586,6 @@ static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 
 	hw = en7523_register_pcie_clk(dev, base);
 	clk_data->hws[EN7523_CLK_PCIE] = hw;
-
-	clk_data->num = EN7523_NUM_CLOCKS;
 }
 
 static int en7523_reset_update(struct reset_controller_dev *rcdev,
@@ -702,21 +699,24 @@ static int en7523_clk_probe(struct platform_device *pdev)
 	struct clk_hw_onecell_data *clk_data;
 	int r;
 
+	soc_data = device_get_match_data(&pdev->dev);
+
 	clk_data = devm_kzalloc(&pdev->dev,
-				struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+				struct_size(clk_data, hws, soc_data->num_clocks),
 				GFP_KERNEL);
 	if (!clk_data)
 		return -ENOMEM;
 
-	soc_data = device_get_match_data(&pdev->dev);
 	r = soc_data->hw_init(pdev, clk_data);
 	if (r)
 		return r;
 
+	clk_data->num = soc_data->num_clocks;
 	return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 }
 
 static const struct en_clk_soc_data en7523_data = {
+	.num_clocks = ARRAY_SIZE(en7523_base_clks) + 1,
 	.pcie_ops = {
 		.is_enabled = en7523_pci_is_enabled,
 		.prepare = en7523_pci_prepare,
@@ -726,6 +726,8 @@ static const struct en_clk_soc_data en7523_data = {
 };
 
 static const struct en_clk_soc_data en7581_data = {
+	/* We increment num_clocks by 1 to account for additional PCIe clock */
+	.num_clocks = ARRAY_SIZE(en7581_base_clks) + 1,
 	.pcie_ops = {
 		.is_enabled = en7581_pci_is_enabled,
 		.enable = en7581_pci_enable,
Signature · 1 line
2.45.2
#6 lore raw

PATCH v3 4/4 clk: en7523: Add clock for eMMC for EN7581

In reply to Christian Marangi

Add clock for eMMC for EN7581. This is used to give info of the current eMMC source clock and to switch it from 200MHz or 150MHz.

---
Changes v2:
- Rename emmc_base to emmc7581_base to make it more clear

 drivers/clk/clk-en7523.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/clk/clk-en7523.c +10 -0
index 596847446b14..b36445359b5a 100644
@@ -91,6 +91,7 @@ static const u32 emi7581_base[] = { 540000000, 480000000, 400000000, 300000000 }
 static const u32 bus7581_base[] = { 600000000, 540000000 };
 static const u32 npu7581_base[] = { 800000000, 750000000, 720000000, 600000000 };
 static const u32 crypto_base[] = { 540000000, 480000000 };
+static const u32 emmc7581_base[] = { 200000000, 150000000 };
 
 static const struct en_clk_desc en7523_base_clks[] = {
 	{
@@ -281,6 +282,15 @@ static const struct en_clk_desc en7581_base_clks[] = {
 		.base_shift = 0,
 		.base_values = crypto_base,
 		.n_base_values = ARRAY_SIZE(crypto_base),
+	}, {
+		.id = EN7581_CLK_EMMC,
+		.name = "emmc",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+		.base_bits = 1,
+		.base_shift = 12,
+		.base_values = emmc7581_base,
+		.n_base_values = ARRAY_SIZE(emmc7581_base),
 	}
 };
 
Signature · 1 line
2.45.2