Skip to contentSkip to conversation

KVM: arm64: Debug cleanups

PATCH Applied Oliver Upton 3 participants 23 messages Dec 19, 2024 – Jan 31, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover KVM: arm64: Debug cleanups

Hopefully the last spin! Addressed some review comments, and snuck in one more cleanup to the sysreg handlers since that was quite a mess too.

v3 -> v4:
- Collect Tested-by tags from James (thanks!)
- Delete stray if condition, second attempt (Marc)
- Hoist writes to MDCR_EL2 into kvm_arm_setup_mdcr_el2()
- Get rid of the sysreg accessor mess for DBGxVR/DBGxCR

v3: https://lore.kernel.org/kvmarm/[email protected]/

Oliver Upton (19):
KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK
KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts
KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of
vCPU
KVM: arm64: Move host SME/SVE tracking flags to host data
KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2()
KVM: arm64: Evaluate debug owner at vcpu_load()
KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler
KVM: arm64: Select debug state to save/restore based on debug owner
KVM: arm64: Remove debug tracepoints
KVM: arm64: Remove vestiges of debug_ptr
KVM: arm64: Use debug_owner to track if debug regs need save/restore
KVM: arm64: Reload vCPU for accesses to OSLAR_EL1
KVM: arm64: Compute MDCR_EL2 at vcpu_load()
KVM: arm64: Don't hijack guest context MDSCR_EL1
KVM: arm64: Manage software step state at load/put
KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions
KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore
KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set
KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads

 arch/arm64/include/asm/kvm_asm.h           |   5 +-
 arch/arm64/include/asm/kvm_host.h          |  94 ++---
 arch/arm64/include/asm/kvm_nested.h        |   1 +
 arch/arm64/kvm/arm.c                       |  14 +-
 arch/arm64/kvm/debug.c                     | 380 +++++++--------------
 arch/arm64/kvm/emulate-nested.c            |  23 +-
 arch/arm64/kvm/fpsimd.c                    |  12 +-
 arch/arm64/kvm/guest.c                     |  31 +-
 arch/arm64/kvm/handle_exit.c               |   5 +-
 arch/arm64/kvm/hyp/include/hyp/debug-sr.h  |  42 +--
 arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h |  43 ++-
 arch/arm64/kvm/hyp/nvhe/debug-sr.c         |  13 +-
 arch/arm64/kvm/hyp/nvhe/hyp-main.c         |   8 -
 arch/arm64/kvm/hyp/vhe/debug-sr.c          |   5 -
 arch/arm64/kvm/sys_regs.c                  | 249 ++++----------
 arch/arm64/kvm/trace_handle_exit.h         |  75 ----
 16 files changed, 350 insertions(+), 650 deletions(-)

base-commit: 78d4f34e2115b517bcbfe7ec0d018bbbb6f9b0b8

Signature · 1 line
2.39.5
#1 lore raw

PATCH v4 1/19 KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK

Nothing is using this macro, get rid of it.

---
 arch/arm64/kvm/debug.c | 5 -----
 1 file changed, 5 deletions(-)
arch/arm64/kvm/debug.c +0 -5
index ce8886122ed3..587e9eb4372e 100644
@@ -16,11 +16,6 @@
 
 #include "trace.h"
 
-/* These are the bits of MDSCR_EL1 we may manipulate */
-#define MDSCR_EL1_DEBUG_MASK	(DBG_MDSCR_SS | \
-				DBG_MDSCR_KDE | \
-				DBG_MDSCR_MDE)
-
 static DEFINE_PER_CPU(u64, mdcr_el2);
 
 /*
Signature · 1 line
2.39.5
#2 lore raw

PATCH v4 2/19 KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts

In reply to Oliver Upton

KVM caches MDCR_EL2 on a per-CPU basis in order to preserve the configuration of MDCR_EL2.HPMN while running a guest. This is a bit gross, since we're relying on some baked configuration rather than the hardware definition of implemented counters.

Discover the number of implemented counters by reading PMCR_EL0.N instead. This works because:

- In VHE the kernel runs at EL2, and N always returns the number of counters implemented in hardware

- In {n,h}VHE, the EL2 setup code programs MDCR_EL2.HPMN with the EL2 view of PMCR_EL0.N for the host

Lastly, avoid traps under nested virtualization by saving PMCR_EL0.N in host data.

---
 arch/arm64/include/asm/kvm_asm.h   |  5 +----
 arch/arm64/include/asm/kvm_host.h  |  7 +++++--
 arch/arm64/kvm/arm.c               |  2 +-
 arch/arm64/kvm/debug.c             | 29 +++++++++++------------------
 arch/arm64/kvm/hyp/nvhe/debug-sr.c |  5 -----
 arch/arm64/kvm/hyp/nvhe/hyp-main.c |  6 ------
 arch/arm64/kvm/hyp/vhe/debug-sr.c  |  5 -----
 7 files changed, 18 insertions(+), 41 deletions(-)
arch/arm64/include/asm/kvm_asm.h +1 -4
index ca2590344313..063185c202ce 100644
@@ -53,8 +53,7 @@
 enum __kvm_host_smccc_func {
 	/* Hypercalls available only prior to pKVM finalisation */
 	/* __KVM_HOST_SMCCC_FUNC___kvm_hyp_init */
-	__KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2 = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1,
-	__KVM_HOST_SMCCC_FUNC___pkvm_init,
+	__KVM_HOST_SMCCC_FUNC___pkvm_init = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1,
 	__KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping,
 	__KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector,
 	__KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs,
@@ -247,8 +246,6 @@ extern void __kvm_adjust_pc(struct kvm_vcpu *vcpu);
 extern u64 __vgic_v3_get_gic_config(void);
 extern void __vgic_v3_init_lrs(void);
 
-extern u64 __kvm_get_mdcr_el2(void);
-
 #define __KVM_EXTABLE(from, to)						\
 	"	.pushsection	__kvm_ex_table, \"a\"\n"		\
 	"	.align		3\n"					\
arch/arm64/include/asm/kvm_host.h +5 -2
index e18e9244d17a..064f5dfca7f4 100644
@@ -642,7 +642,7 @@ struct kvm_host_data {
 	 * host_debug_state contains the host registers which are
 	 * saved and restored during world switches.
 	 */
-	 struct {
+	struct {
 		/* {Break,watch}point registers */
 		struct kvm_guest_debug_arch regs;
 		/* Statistical profiling extension */
@@ -652,6 +652,9 @@ struct kvm_host_data {
 		/* Values of trap registers for the host before guest entry. */
 		u64 mdcr_el2;
 	} host_debug_state;
+
+	/* Number of programmable event counters (PMCR_EL0.N) for this CPU */
+	unsigned int nr_event_counters;
 };
 
 struct kvm_host_psci_config {
@@ -1332,7 +1335,7 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
 
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 
-void kvm_arm_init_debug(void);
+void kvm_init_host_debug_data(void);
 void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
arch/arm64/kvm/arm.c +1 -1
index a102c3aebdbc..ab1bf9ccf385 100644
@@ -2109,6 +2109,7 @@ static void cpu_set_hyp_vector(void)
 static void cpu_hyp_init_context(void)
 {
 	kvm_init_host_cpu_context(host_data_ptr(host_ctxt));
+	kvm_init_host_debug_data();
 
 	if (!is_kernel_in_hyp_mode())
 		cpu_init_hyp_mode();
@@ -2117,7 +2118,6 @@ static void cpu_hyp_init_context(void)
 static void cpu_hyp_init_features(void)
 {
 	cpu_set_hyp_vector();
-	kvm_arm_init_debug();
 
 	if (is_kernel_in_hyp_mode())
 		kvm_timer_init_vhe();
arch/arm64/kvm/debug.c +11 -18
index 587e9eb4372e..d8ea6fe6a2a2 100644
@@ -16,8 +16,6 @@
 
 #include "trace.h"
 
-static DEFINE_PER_CPU(u64, mdcr_el2);
-
 /*
  * save/restore_guest_debug_regs
  *
@@ -60,21 +58,6 @@ static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
 		*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
 }
 
-/**
- * kvm_arm_init_debug - grab what we need for debug
- *
- * Currently the sole task of this function is to retrieve the initial
- * value of mdcr_el2 so we can preserve MDCR_EL2.HPMN which has
- * presumably been set-up by some knowledgeable bootcode.
- *
- * It is called once per-cpu during CPU hyp initialisation.
- */
-
-void kvm_arm_init_debug(void)
-{
-	__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
-}
-
 /**
  * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value
  *
@@ -94,7 +77,8 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 	 * This also clears MDCR_EL2_E2PB_MASK and MDCR_EL2_E2TB_MASK
 	 * to disable guest access to the profiling and trace buffers
 	 */
-	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+	vcpu->arch.mdcr_el2 = FIELD_PREP(MDCR_EL2_HPMN,
+					 *host_data_ptr(nr_event_counters));
 	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
 				MDCR_EL2_TPMS |
 				MDCR_EL2_TTRF |
@@ -338,3 +322,12 @@ void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
 	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
 	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
 }
+
+void kvm_init_host_debug_data(void)
+{
+	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	if (cpuid_feature_extract_signed_field(dfr0, ID_AA64DFR0_EL1_PMUVer_SHIFT) > 0)
+		*host_data_ptr(nr_event_counters) = FIELD_GET(ARMV8_PMU_PMCR_N,
+							      read_sysreg(pmcr_el0));
+}
arch/arm64/kvm/hyp/nvhe/debug-sr.c +0 -5
index 53efda0235cf..1e2a26d0196e 100644
@@ -106,8 +106,3 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 {
 	__debug_switch_to_host_common(vcpu);
 }
-
-u64 __kvm_get_mdcr_el2(void)
-{
-	return read_sysreg(mdcr_el2);
-}
arch/arm64/kvm/hyp/nvhe/hyp-main.c +0 -6
index 6aa0b13d86e5..16f5da3a884a 100644
@@ -264,11 +264,6 @@ static void handle___vgic_v3_init_lrs(struct kvm_cpu_context *host_ctxt)
 	__vgic_v3_init_lrs();
 }
 
-static void handle___kvm_get_mdcr_el2(struct kvm_cpu_context *host_ctxt)
-{
-	cpu_reg(host_ctxt, 1) = __kvm_get_mdcr_el2();
-}
-
 static void handle___vgic_v3_save_vmcr_aprs(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct vgic_v3_cpu_if *, cpu_if, host_ctxt, 1);
@@ -384,7 +379,6 @@ typedef void (*hcall_t)(struct kvm_cpu_context *);
 
 static const hcall_t host_hcall[] = {
 	/* ___kvm_hyp_init */
-	HANDLE_FUNC(__kvm_get_mdcr_el2),
 	HANDLE_FUNC(__pkvm_init),
 	HANDLE_FUNC(__pkvm_create_private_mapping),
 	HANDLE_FUNC(__pkvm_cpu_set_vector),
arch/arm64/kvm/hyp/vhe/debug-sr.c +0 -5
index 289689b2682d..0100339b09e0 100644
@@ -19,8 +19,3 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 {
 	__debug_switch_to_host_common(vcpu);
 }
-
-u64 __kvm_get_mdcr_el2(void)
-{
-	return read_sysreg(mdcr_el2);
-}
Signature · 1 line
2.39.5
#3 lore raw

PATCH v4 3/19 KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU

In reply to Oliver Upton

Add flags to kvm_host_data to track if SPE/TRBE is present + programmable on a per-CPU basis. Set the flags up at init rather than vcpu_load() as the programmability of these buffers is unlikely to change.

---
 arch/arm64/include/asm/kvm_host.h  | 19 +++++++++-------
 arch/arm64/kvm/arm.c               |  3 ---
 arch/arm64/kvm/debug.c             | 36 ++++++++----------------------
 arch/arm64/kvm/hyp/nvhe/debug-sr.c |  8 +++----
 4 files changed, 24 insertions(+), 42 deletions(-)
arch/arm64/include/asm/kvm_host.h +11 -8
index 064f5dfca7f4..fb252d540850 100644
@@ -610,6 +610,10 @@ struct cpu_sve_state {
  * field.
  */
 struct kvm_host_data {
+#define KVM_HOST_DATA_FLAG_HAS_SPE	0
+#define KVM_HOST_DATA_FLAG_HAS_TRBE	1
+	unsigned long flags;
+
 	struct kvm_cpu_context host_ctxt;
 
 	/*
@@ -911,10 +915,6 @@ struct kvm_vcpu_arch {
 #define EXCEPT_AA64_EL2_SERR	__vcpu_except_flags(7)
 /* Guest debug is live */
 #define DEBUG_DIRTY		__vcpu_single_flag(iflags, BIT(4))
-/* Save SPE context if active  */
-#define DEBUG_STATE_SAVE_SPE	__vcpu_single_flag(iflags, BIT(5))
-/* Save TRBE context if active  */
-#define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
 
 /* SVE enabled for host EL0 */
 #define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
@@ -1310,6 +1310,13 @@ DECLARE_KVM_HYP_PER_CPU(struct kvm_host_data, kvm_host_data);
 	 &this_cpu_ptr_hyp_sym(kvm_host_data)->f)
 #endif
 
+#define host_data_test_flag(flag)					\
+	(test_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags)))
+#define host_data_set_flag(flag)					\
+	set_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags))
+#define host_data_clear_flag(flag)					\
+	clear_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags))
+
 /* Check whether the FP regs are owned by the guest */
 static inline bool guest_owns_fp_regs(void)
 {
@@ -1370,10 +1377,6 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
 	return (!has_vhe() && attr->exclude_host);
 }
 
-/* Flags for host debug state */
-void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
-
 #ifdef CONFIG_KVM
 void kvm_set_pmu_events(u64 set, struct perf_event_attr *attr);
 void kvm_clr_pmu_events(u64 clr);
arch/arm64/kvm/arm.c +0 -3
index ab1bf9ccf385..3822774840e1 100644
@@ -617,15 +617,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	vcpu_set_pauth_traps(vcpu);
 
-	kvm_arch_vcpu_load_debug_state_flags(vcpu);
-
 	if (!cpumask_test_cpu(cpu, vcpu->kvm->arch.supported_cpus))
 		vcpu_set_on_unsupported_cpu(vcpu);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	kvm_arch_vcpu_put_debug_state_flags(vcpu);
 	kvm_arch_vcpu_put_fp(vcpu);
 	if (has_vhe())
 		kvm_vcpu_put_vhe(vcpu);
arch/arm64/kvm/debug.c +9 -27
index d8ea6fe6a2a2..1ee2fd765b62 100644
@@ -294,40 +294,22 @@ void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
 	}
 }
 
-void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
+void kvm_init_host_debug_data(void)
 {
-	u64 dfr0;
+	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	if (cpuid_feature_extract_signed_field(dfr0, ID_AA64DFR0_EL1_PMUVer_SHIFT) > 0)
+		*host_data_ptr(nr_event_counters) = FIELD_GET(ARMV8_PMU_PMCR_N,
+							      read_sysreg(pmcr_el0));
 
-	/* For VHE, there is nothing to do */
 	if (has_vhe())
 		return;
 
-	dfr0 = read_sysreg(id_aa64dfr0_el1);
-	/*
-	 * If SPE is present on this CPU and is available at current EL,
-	 * we may need to check if the host state needs to be saved.
-	 */
 	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) &&
-	    !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT)))
-		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE);
+	    !(read_sysreg_s(SYS_PMBIDR_EL1) & PMBIDR_EL1_P))
+		host_data_set_flag(HAS_SPE);
 
-	/* Check if we have TRBE implemented and available at the host */
 	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
 	    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
-		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
-}
-
-void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
-{
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
-}
-
-void kvm_init_host_debug_data(void)
-{
-	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
-
-	if (cpuid_feature_extract_signed_field(dfr0, ID_AA64DFR0_EL1_PMUVer_SHIFT) > 0)
-		*host_data_ptr(nr_event_counters) = FIELD_GET(ARMV8_PMU_PMCR_N,
-							      read_sysreg(pmcr_el0));
+		host_data_set_flag(HAS_TRBE);
 }
arch/arm64/kvm/hyp/nvhe/debug-sr.c +4 -4
index 1e2a26d0196e..858bb38e273f 100644
@@ -82,10 +82,10 @@ static void __debug_restore_trace(u64 trfcr_el1)
 void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu)
 {
 	/* Disable and flush SPE data generation */
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+	if (host_data_test_flag(HAS_SPE))
 		__debug_save_spe(host_data_ptr(host_debug_state.pmscr_el1));
 	/* Disable and flush Self-Hosted Trace generation */
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
+	if (host_data_test_flag(HAS_TRBE))
 		__debug_save_trace(host_data_ptr(host_debug_state.trfcr_el1));
 }
 
@@ -96,9 +96,9 @@ void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
 
 void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu)
 {
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+	if (host_data_test_flag(HAS_SPE))
 		__debug_restore_spe(*host_data_ptr(host_debug_state.pmscr_el1));
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
+	if (host_data_test_flag(HAS_TRBE))
 		__debug_restore_trace(*host_data_ptr(host_debug_state.trfcr_el1));
 }
 
Signature · 1 line
2.39.5
#4 lore raw

PATCH v4 4/19 KVM: arm64: Move host SME/SVE tracking flags to host data

In reply to Oliver Upton

The SME/SVE state tracking flags have no business in the vCPU. Move them to kvm_host_data.

---
 arch/arm64/include/asm/kvm_host.h | 22 ++++++++++------------
 arch/arm64/kvm/fpsimd.c           | 12 ++++++------
 2 files changed, 16 insertions(+), 18 deletions(-)
arch/arm64/include/asm/kvm_host.h +10 -12
index fb252d540850..d196bf0fce52 100644
@@ -610,8 +610,10 @@ struct cpu_sve_state {
  * field.
  */
 struct kvm_host_data {
-#define KVM_HOST_DATA_FLAG_HAS_SPE	0
-#define KVM_HOST_DATA_FLAG_HAS_TRBE	1
+#define KVM_HOST_DATA_FLAG_HAS_SPE			0
+#define KVM_HOST_DATA_FLAG_HAS_TRBE			1
+#define KVM_HOST_DATA_FLAG_HOST_SVE_ENABLED		2
+#define KVM_HOST_DATA_FLAG_HOST_SME_ENABLED		3
 	unsigned long flags;
 
 	struct kvm_cpu_context host_ctxt;
@@ -916,22 +918,18 @@ struct kvm_vcpu_arch {
 /* Guest debug is live */
 #define DEBUG_DIRTY		__vcpu_single_flag(iflags, BIT(4))
 
-/* SVE enabled for host EL0 */
-#define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
-/* SME enabled for EL0 */
-#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
 /* Physical CPU not in supported_cpus */
-#define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
+#define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(0))
 /* WFIT instruction trapped */
-#define IN_WFIT			__vcpu_single_flag(sflags, BIT(3))
+#define IN_WFIT			__vcpu_single_flag(sflags, BIT(1))
 /* vcpu system registers loaded on physical CPU */
-#define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(4))
+#define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(2))
 /* Software step state is Active-pending */
-#define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(5))
+#define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(3))
 /* PMUSERENR for the guest EL0 is on physical CPU */
-#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(6))
+#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(4))
 /* WFI instruction trapped */
-#define IN_WFI			__vcpu_single_flag(sflags, BIT(7))
+#define IN_WFI			__vcpu_single_flag(sflags, BIT(5))
 
 
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
arch/arm64/kvm/fpsimd.c +6 -6
index ea5484ce1f3b..0e0f37d1990a 100644
@@ -65,14 +65,14 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
 	*host_data_ptr(fpsimd_state) = kern_hyp_va(&current->thread.uw.fpsimd_state);
 	*host_data_ptr(fpmr_ptr) = kern_hyp_va(&current->thread.uw.fpmr);
 
-	vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
+	host_data_clear_flag(HOST_SVE_ENABLED);
 	if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
-		vcpu_set_flag(vcpu, HOST_SVE_ENABLED);
+		host_data_set_flag(HOST_SVE_ENABLED);
 
 	if (system_supports_sme()) {
-		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
+		host_data_clear_flag(HOST_SME_ENABLED);
 		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
-			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
+			host_data_set_flag(HOST_SME_ENABLED);
 
 		/*
 		 * If PSTATE.SM is enabled then save any pending FP
@@ -168,7 +168,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 	 */
 	if (has_vhe() && system_supports_sme()) {
 		/* Also restore EL0 state seen on entry */
-		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
+		if (host_data_test_flag(HOST_SME_ENABLED))
 			sysreg_clear_set(CPACR_EL1, 0, CPACR_ELx_SMEN);
 		else
 			sysreg_clear_set(CPACR_EL1,
@@ -227,7 +227,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 		 * for EL0.  To avoid spurious traps, restore the trap state
 		 * seen by kvm_arch_vcpu_load_fp():
 		 */
-		if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED))
+		if (host_data_test_flag(HOST_SVE_ENABLED))
 			sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN);
 		else
 			sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
Signature · 1 line
2.39.5
#5 lore raw

PATCH v4 5/19 KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2()

In reply to Oliver Upton

Expecting the callee to know when MDCR_EL2 needs to be written to hardware asking for trouble. Do the deed from kvm_arm_setup_mdcr_el2() instead.

---
 arch/arm64/kvm/debug.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
arch/arm64/kvm/debug.c +8 -4
index 1ee2fd765b62..f01597f89067 100644
@@ -73,6 +73,8 @@ static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
  */
 static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 {
+	preempt_disable();
+
 	/*
 	 * This also clears MDCR_EL2_E2PB_MASK and MDCR_EL2_E2TB_MASK
 	 * to disable guest access to the profiling and trace buffers
@@ -103,6 +105,12 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 	    kvm_vcpu_os_lock_enabled(vcpu))
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
 
+	/* Write MDCR_EL2 directly if we're already at EL2 */
+	if (has_vhe())
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
+	preempt_enable();
+
 	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
 }
 
@@ -250,10 +258,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
-	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
-	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
-		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
-
 	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }
 
Signature · 1 line
2.39.5
#6 lore raw

PATCH v4 6/19 KVM: arm64: Evaluate debug owner at vcpu_load()

In reply to Oliver Upton

In preparation for tossing the debug_ptr mess, introduce an enumeration to track the ownership of the debug registers while in the guest. Update the owner at vcpu_load() based on whether the host needs to steal the guest's debug context or if breakpoints/watchpoints are actively in use.

---
 arch/arm64/include/asm/kvm_host.h | 11 ++++++++
 arch/arm64/kvm/arm.c              |  1 +
 arch/arm64/kvm/debug.c            | 46 +++++++++++++++++++++++++++++++
 arch/arm64/kvm/sys_regs.c         |  2 ++
 4 files changed, 60 insertions(+)
arch/arm64/include/asm/kvm_host.h +11 -0
index d196bf0fce52..f65b30bab0ab 100644
@@ -756,6 +756,12 @@ struct kvm_vcpu_arch {
 	struct kvm_guest_debug_arch vcpu_debug_state;
 	struct kvm_guest_debug_arch external_debug_state;
 
+	enum {
+		VCPU_DEBUG_FREE,
+		VCPU_DEBUG_HOST_OWNED,
+		VCPU_DEBUG_GUEST_OWNED,
+	} debug_owner;
+
 	/* VGIC state */
 	struct vgic_cpu vgic_cpu;
 	struct arch_timer_cpu timer_cpu;
@@ -1345,10 +1351,15 @@ void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
+void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
+void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
 
 #define kvm_vcpu_os_lock_enabled(vcpu)		\
 	(!!(__vcpu_sys_reg(vcpu, OSLSR_EL1) & OSLSR_EL1_OSLK))
 
+#define kvm_host_owns_debug_regs(vcpu)		\
+	((vcpu)->arch.debug_owner == VCPU_DEBUG_HOST_OWNED)
+
 int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
 			       struct kvm_device_attr *attr);
 int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
arch/arm64/kvm/arm.c +1 -0
index 3822774840e1..a068337da52a 100644
@@ -598,6 +598,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	kvm_vgic_load(vcpu);
 	kvm_timer_vcpu_load(vcpu);
+	kvm_vcpu_load_debug(vcpu);
 	if (has_vhe())
 		kvm_vcpu_load_vhe(vcpu);
 	kvm_arch_vcpu_load_fp(vcpu);
arch/arm64/kvm/debug.c +46 -0

49 lines not on this page · raw message

arch/arm64/kvm/sys_regs.c +2 -0
index e2a5c2918d9e..e45a096be669 100644
@@ -656,6 +656,7 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
+	kvm_debug_set_guest_ownership(vcpu);
 	trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
 
 	return true;
@@ -684,6 +685,7 @@ static void reg_to_dbg(struct kvm_vcpu *vcpu,
 	val |= (p->regval & (mask >> shift)) << shift;
 	*dbg_reg = val;
 
+	kvm_debug_set_guest_ownership(vcpu);
 	vcpu_set_flag(vcpu, DEBUG_DIRTY);
 }
 
Signature · 1 line
2.39.5
#7 lore raw

PATCH v4 7/19 KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler

In reply to Oliver Upton

No particular reason other than it isn't nice to look at.

---
 arch/arm64/kvm/guest.c | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)
arch/arm64/kvm/guest.c +11 -18
index 12dad841f2a5..1fe097c67766 100644
@@ -917,31 +917,24 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
 {
-	int ret = 0;
-
 	trace_kvm_set_guest_debug(vcpu, dbg->control);
 
-	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (dbg->control & KVM_GUESTDBG_ENABLE) {
-		vcpu->guest_debug = dbg->control;
-
-		/* Hardware assisted Break and Watch points */
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			vcpu->arch.external_debug_state = dbg->arch;
-		}
+	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK)
+		return -EINVAL;
 
-	} else {
-		/* If not enabled clear all flags */
+	if (!(dbg->control & KVM_GUESTDBG_ENABLE)) {
 		vcpu->guest_debug = 0;
 		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		return 0;
 	}
 
-out:
-	return ret;
+	vcpu->guest_debug = dbg->control;
+
+	/* Hardware assisted Break and Watch points */
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW)
+		vcpu->arch.external_debug_state = dbg->arch;
+
+	return 0;
 }
 
 int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
Signature · 1 line
2.39.5
#8 lore raw

PATCH v4 8/19 KVM: arm64: Select debug state to save/restore based on debug owner

In reply to Oliver Upton

Select the set of debug registers to use based on the owner rather than relying on debug_ptr. Besides the code cleanup, this allows us to eliminate a couple instances kern_hyp_va() as well.

---
 arch/arm64/include/asm/kvm_host.h         |  2 ++
 arch/arm64/kvm/hyp/include/hyp/debug-sr.h | 23 +++++++++++++++++++----
 2 files changed, 21 insertions(+), 4 deletions(-)
arch/arm64/include/asm/kvm_host.h +2 -0
index f65b30bab0ab..5ef1b2f69e89 100644
@@ -1357,6 +1357,8 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
 #define kvm_vcpu_os_lock_enabled(vcpu)		\
 	(!!(__vcpu_sys_reg(vcpu, OSLSR_EL1) & OSLSR_EL1_OSLK))
 
+#define kvm_debug_regs_in_use(vcpu)		\
+	((vcpu)->arch.debug_owner != VCPU_DEBUG_FREE)
 #define kvm_host_owns_debug_regs(vcpu)		\
 	((vcpu)->arch.debug_owner == VCPU_DEBUG_HOST_OWNED)
 
arch/arm64/kvm/hyp/include/hyp/debug-sr.h +19 -4
index d00093699aaf..9e3051225039 100644
@@ -88,6 +88,21 @@
 	default:	write_debug(ptr[0], reg, 0);			\
 	}
 
+static struct kvm_guest_debug_arch *__vcpu_debug_regs(struct kvm_vcpu *vcpu)
+{
+	switch (vcpu->arch.debug_owner) {
+	case VCPU_DEBUG_FREE:
+		WARN_ON_ONCE(1);
+		fallthrough;
+	case VCPU_DEBUG_GUEST_OWNED:
+		return &vcpu->arch.vcpu_debug_state;
+	case VCPU_DEBUG_HOST_OWNED:
+		return &vcpu->arch.external_debug_state;
+	}
+
+	return NULL;
+}
+
 static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
 			       struct kvm_cpu_context *ctxt)
 {
@@ -132,13 +147,13 @@ static inline void __debug_switch_to_guest_common(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (!kvm_debug_regs_in_use(vcpu))
 		return;
 
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 	host_dbg = host_data_ptr(host_debug_state.regs);
-	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+	guest_dbg = __vcpu_debug_regs(vcpu);
 
 	__debug_save_state(host_dbg, host_ctxt);
 	__debug_restore_state(guest_dbg, guest_ctxt);
@@ -151,13 +166,13 @@ static inline void __debug_switch_to_host_common(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (!kvm_debug_regs_in_use(vcpu))
 		return;
 
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 	host_dbg = host_data_ptr(host_debug_state.regs);
-	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+	guest_dbg = __vcpu_debug_regs(vcpu);
 
 	__debug_save_state(guest_dbg, guest_ctxt);
 	__debug_restore_state(host_dbg, host_ctxt);
Signature · 1 line
2.39.5
#9 lore raw

PATCH v4 9/19 KVM: arm64: Remove debug tracepoints

In reply to Oliver Upton

The debug tracepoints are a useless firehose of information that track implementation detail rather than well-defined events. These are going to be rather difficult to uphold now that the implementation is getting redone, so throw them out instead of bending over backwards.

---
 arch/arm64/kvm/debug.c             | 30 ------------
 arch/arm64/kvm/sys_regs.c          | 11 -----
 arch/arm64/kvm/trace_handle_exit.h | 75 ------------------------------
 3 files changed, 116 deletions(-)
arch/arm64/kvm/debug.c +0 -30
index 3222729a559d..62d7e4041814 100644
@@ -14,7 +14,6 @@
 #include <asm/kvm_arm.h>
 #include <asm/kvm_emulate.h>
 
-#include "trace.h"
 
 /*
  * save/restore_guest_debug_regs
@@ -35,10 +34,6 @@ static void save_guest_debug_regs(struct kvm_vcpu *vcpu)
 	u64 val = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
 
 	vcpu->arch.guest_debug_preserved.mdscr_el1 = val;
-
-	trace_kvm_arm_set_dreg32("Saved MDSCR_EL1",
-				vcpu->arch.guest_debug_preserved.mdscr_el1);
-
 	vcpu->arch.guest_debug_preserved.pstate_ss =
 					(*vcpu_cpsr(vcpu) & DBG_SPSR_SS);
 }
@@ -49,9 +44,6 @@ static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
 
 	vcpu_write_sys_reg(vcpu, val, MDSCR_EL1);
 
-	trace_kvm_arm_set_dreg32("Restored MDSCR_EL1",
-				vcpu_read_sys_reg(vcpu, MDSCR_EL1));
-
 	if (vcpu->arch.guest_debug_preserved.pstate_ss)
 		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
 	else
@@ -110,8 +102,6 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 
 	preempt_enable();
-
-	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
 }
 
 /**
@@ -209,8 +199,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
 		}
 
-		trace_kvm_arm_set_dreg32("SPSR_EL2", *vcpu_cpsr(vcpu));
-
 		/*
 		 * HW Breakpoints and watchpoints
 		 *
@@ -228,14 +216,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
 			vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
-			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
-						&vcpu->arch.debug_ptr->dbg_bcr[0],
-						&vcpu->arch.debug_ptr->dbg_bvr[0]);
-
-			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
-						&vcpu->arch.debug_ptr->dbg_wcr[0],
-						&vcpu->arch.debug_ptr->dbg_wvr[0]);
-
 		/*
 		 * The OS Lock blocks debug exceptions in all ELs when it is
 		 * enabled. If the guest has enabled the OS Lock, constrain its
@@ -257,8 +237,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	/* If KDE or MDE are set, perform a full save/restore cycle. */
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu_set_flag(vcpu, DEBUG_DIRTY);
-
-	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }
 
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
@@ -286,14 +264,6 @@ void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
 			kvm_arm_reset_debug_ptr(vcpu);
-
-			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
-						&vcpu->arch.debug_ptr->dbg_bcr[0],
-						&vcpu->arch.debug_ptr->dbg_bvr[0]);
-
-			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
-						&vcpu->arch.debug_ptr->dbg_wcr[0],
-						&vcpu->arch.debug_ptr->dbg_wvr[0]);
 		}
 	}
 }
arch/arm64/kvm/sys_regs.c +0 -11
index e45a096be669..8c5771572133 100644
@@ -657,8 +657,6 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
 		vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
 	kvm_debug_set_guest_ownership(vcpu);
-	trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
-
 	return true;
 }
 
@@ -711,8 +709,6 @@ static bool trap_bvr(struct kvm_vcpu *vcpu,
 	else
 		dbg_to_reg(vcpu, p, rd, dbg_reg);
 
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
-
 	return true;
 }
 
@@ -748,8 +744,6 @@ static bool trap_bcr(struct kvm_vcpu *vcpu,
 	else
 		dbg_to_reg(vcpu, p, rd, dbg_reg);
 
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
-
 	return true;
 }
 
@@ -785,9 +779,6 @@ static bool trap_wvr(struct kvm_vcpu *vcpu,
 	else
 		dbg_to_reg(vcpu, p, rd, dbg_reg);
 
-	trace_trap_reg(__func__, rd->CRm, p->is_write,
-		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm]);
-
 	return true;
 }
 
@@ -823,8 +814,6 @@ static bool trap_wcr(struct kvm_vcpu *vcpu,
 	else
 		dbg_to_reg(vcpu, p, rd, dbg_reg);
 
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
-
 	return true;
 }
 
arch/arm64/kvm/trace_handle_exit.h +0 -75

87 lines not on this page · raw message

Signature · 1 line
2.39.5
#10 lore raw

PATCH v4 10/19 KVM: arm64: Remove vestiges of debug_ptr

In reply to Oliver Upton

Delete the remnants of debug_ptr now that debug registers are selected based on the debug owner instead.

---
 arch/arm64/include/asm/kvm_host.h  |  5 -----
 arch/arm64/kvm/arm.c               |  2 --
 arch/arm64/kvm/debug.c             | 30 +-----------------------------
 arch/arm64/kvm/hyp/nvhe/hyp-main.c |  2 --
 4 files changed, 1 insertion(+), 38 deletions(-)
arch/arm64/include/asm/kvm_host.h +0 -5
index 5ef1b2f69e89..905b84e59c24 100644
@@ -748,11 +748,7 @@ struct kvm_vcpu_arch {
 	 *
 	 * external_debug_state contains the debug values we want to debug the
 	 * guest. This is set via the KVM_SET_GUEST_DEBUG ioctl.
-	 *
-	 * debug_ptr points to the set of debug registers that should be loaded
-	 * onto the hardware when running the guest.
 	 */
-	struct kvm_guest_debug_arch *debug_ptr;
 	struct kvm_guest_debug_arch vcpu_debug_state;
 	struct kvm_guest_debug_arch external_debug_state;
 
@@ -1350,7 +1346,6 @@ void kvm_init_host_debug_data(void);
 void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
-void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
 void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
 void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
 
arch/arm64/kvm/arm.c +0 -2
index a068337da52a..44a6093b0d9e 100644
@@ -476,8 +476,6 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 
 	kvm_pmu_vcpu_init(vcpu);
 
-	kvm_arm_reset_debug_ptr(vcpu);
-
 	kvm_arm_pvtime_vcpu_init(&vcpu->arch);
 
 	vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
arch/arm64/kvm/debug.c +1 -29
index 62d7e4041814..c75874435157 100644
@@ -118,16 +118,6 @@ void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
 	preempt_enable();
 }
 
-/**
- * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
- * @vcpu:	the vcpu pointer
- */
-
-void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.debug_ptr = &vcpu->arch.vcpu_debug_state;
-}
-
 /**
  * kvm_arm_setup_debug - set up debug related stuff
  *
@@ -200,20 +190,13 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 		}
 
 		/*
-		 * HW Breakpoints and watchpoints
-		 *
-		 * We simply switch the debug_ptr to point to our new
-		 * external_debug_state which has been populated by the
-		 * debug ioctl. The existing DEBUG_DIRTY mechanism ensures
-		 * the registers are updated on the world switch.
+		 * Enable breakpoints and watchpoints if userspace wants them.
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			/* Enable breakpoints/watchpoints */
 			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
 			mdscr |= DBG_MDSCR_MDE;
 			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
 
-			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
 			vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
 		/*
@@ -231,9 +214,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	BUG_ON(!vcpu->guest_debug &&
-		vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
-
 	/* If KDE or MDE are set, perform a full save/restore cycle. */
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu_set_flag(vcpu, DEBUG_DIRTY);
@@ -257,14 +237,6 @@ void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
 		}
 
 		restore_guest_debug_regs(vcpu);
-
-		/*
-		 * If we were using HW debug we need to restore the
-		 * debug_ptr to the guest debug state.
-		 */
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			kvm_arm_reset_debug_ptr(vcpu);
-		}
 	}
 }
 
arch/arm64/kvm/hyp/nvhe/hyp-main.c +0 -2
index 16f5da3a884a..f98ef98af183 100644
@@ -112,8 +112,6 @@ static void flush_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 
 	hyp_vcpu->vcpu.arch.iflags	= host_vcpu->arch.iflags;
 
-	hyp_vcpu->vcpu.arch.debug_ptr	= kern_hyp_va(host_vcpu->arch.debug_ptr);
-
 	hyp_vcpu->vcpu.arch.vsesr_el2	= host_vcpu->arch.vsesr_el2;
 
 	hyp_vcpu->vcpu.arch.vgic_cpu.vgic_v3 = host_vcpu->arch.vgic_cpu.vgic_v3;
Signature · 1 line
2.39.5
#11 lore raw

PATCH v4 11/19 KVM: arm64: Use debug_owner to track if debug regs need save/restore

In reply to Oliver Upton

Use the debug owner to determine if the debug regs are in use instead of keeping around the DEBUG_DIRTY flag. Debug registers are now saved/restored after the first trap, regardless of whether it was a read or a write. This also shifts the point at which KVM becomes lazy to vcpu_put() rather than the next exception taken from the guest.

---
 arch/arm64/include/asm/kvm_host.h          |  4 +--
 arch/arm64/kvm/debug.c                     | 19 ++-----------
 arch/arm64/kvm/hyp/include/hyp/debug-sr.h  |  2 --
 arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h |  4 +--
 arch/arm64/kvm/sys_regs.c                  | 33 ----------------------
 5 files changed, 7 insertions(+), 55 deletions(-)
arch/arm64/include/asm/kvm_host.h +2 -2
index 905b84e59c24..a6796a952af7 100644
@@ -917,8 +917,6 @@ struct kvm_vcpu_arch {
 #define EXCEPT_AA64_EL2_IRQ	__vcpu_except_flags(5)
 #define EXCEPT_AA64_EL2_FIQ	__vcpu_except_flags(6)
 #define EXCEPT_AA64_EL2_SERR	__vcpu_except_flags(7)
-/* Guest debug is live */
-#define DEBUG_DIRTY		__vcpu_single_flag(iflags, BIT(4))
 
 /* Physical CPU not in supported_cpus */
 #define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(0))
@@ -1356,6 +1354,8 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
 	((vcpu)->arch.debug_owner != VCPU_DEBUG_FREE)
 #define kvm_host_owns_debug_regs(vcpu)		\
 	((vcpu)->arch.debug_owner == VCPU_DEBUG_HOST_OWNED)
+#define kvm_guest_owns_debug_regs(vcpu)		\
+	((vcpu)->arch.debug_owner == VCPU_DEBUG_GUEST_OWNED)
 
 int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
 			       struct kvm_device_attr *attr);
arch/arm64/kvm/debug.c +3 -16
index c75874435157..300ea3720bed 100644
@@ -86,15 +86,9 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
 
 	/*
-	 * Trap debug register access when one of the following is true:
-	 *  - Userspace is using the hardware to debug the guest
-	 *  (KVM_GUESTDBG_USE_HW is set).
-	 *  - The guest is not using debug (DEBUG_DIRTY clear).
-	 *  - The guest has enabled the OS Lock (debug exceptions are blocked).
+	 * Trap debug registers if the guest doesn't have ownership of them.
 	 */
-	if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
-	    !vcpu_get_flag(vcpu, DEBUG_DIRTY) ||
-	    kvm_vcpu_os_lock_enabled(vcpu))
+	if (!kvm_guest_owns_debug_regs(vcpu))
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
 
 	/* Write MDCR_EL2 directly if we're already at EL2 */
@@ -127,8 +121,7 @@ void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
  * debug related registers.
  *
  * Additionally, KVM only traps guest accesses to the debug registers if
- * the guest is not actively using them (see the DEBUG_DIRTY
- * flag on vcpu->arch.iflags).  Since the guest must not interfere
+ * the guest is not actively using them. Since the guest must not interfere
  * with the hardware state when debugging the guest, we must ensure that
  * trapping is enabled whenever we are debugging the guest using the
  * debug registers.
@@ -197,8 +190,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 			mdscr |= DBG_MDSCR_MDE;
 			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
 
-			vcpu_set_flag(vcpu, DEBUG_DIRTY);
-
 		/*
 		 * The OS Lock blocks debug exceptions in all ELs when it is
 		 * enabled. If the guest has enabled the OS Lock, constrain its
@@ -213,10 +204,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
 		}
 	}
-
-	/* If KDE or MDE are set, perform a full save/restore cycle. */
-	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
-		vcpu_set_flag(vcpu, DEBUG_DIRTY);
 }
 
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
arch/arm64/kvm/hyp/include/hyp/debug-sr.h +0 -2
index 9e3051225039..c14586d87361 100644
@@ -176,8 +176,6 @@ static inline void __debug_switch_to_host_common(struct kvm_vcpu *vcpu)
 
 	__debug_save_state(guest_dbg, guest_ctxt);
 	__debug_restore_state(host_dbg, host_ctxt);
-
-	vcpu_clear_flag(vcpu, DEBUG_DIRTY);
 }
 
 #endif /* __ARM64_KVM_HYP_DEBUG_SR_H__ */
arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h +2 -2
index a651c43ad679..a998b2f6abcb 100644
@@ -283,7 +283,7 @@ static inline void __sysreg32_save_state(struct kvm_vcpu *vcpu)
 	__vcpu_sys_reg(vcpu, DACR32_EL2) = read_sysreg(dacr32_el2);
 	__vcpu_sys_reg(vcpu, IFSR32_EL2) = read_sysreg(ifsr32_el2);
 
-	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (has_vhe() || kvm_debug_regs_in_use(vcpu))
 		__vcpu_sys_reg(vcpu, DBGVCR32_EL2) = read_sysreg(dbgvcr32_el2);
 }
 
@@ -300,7 +300,7 @@ static inline void __sysreg32_restore_state(struct kvm_vcpu *vcpu)
 	write_sysreg(__vcpu_sys_reg(vcpu, DACR32_EL2), dacr32_el2);
 	write_sysreg(__vcpu_sys_reg(vcpu, IFSR32_EL2), ifsr32_el2);
 
-	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (has_vhe() || kvm_debug_regs_in_use(vcpu))
 		write_sysreg(__vcpu_sys_reg(vcpu, DBGVCR32_EL2), dbgvcr32_el2);
 }
 
arch/arm64/kvm/sys_regs.c +0 -33
index 8c5771572133..66db77fb6201 100644
@@ -621,40 +621,11 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
 	}
 }
 
-/*
- * We want to avoid world-switching all the DBG registers all the
- * time:
- *
- * - If we've touched any debug register, it is likely that we're
- *   going to touch more of them. It then makes sense to disable the
- *   traps and start doing the save/restore dance
- * - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
- *   then mandatory to save/restore the registers, as the guest
- *   depends on them.
- *
- * For this, we use a DIRTY bit, indicating the guest has modified the
- * debug registers, used as follow:
- *
- * On guest entry:
- * - If the dirty bit is set (because we're coming back from trapping),
- *   disable the traps, save host registers, restore guest registers.
- * - If debug is actively in use (DBG_MDSCR_KDE or DBG_MDSCR_MDE set),
- *   set the dirty bit, disable the traps, save host registers,
- *   restore guest registers.
- * - Otherwise, enable the traps
- *
- * On guest exit:
- * - If the dirty bit is set, save guest registers, restore host
- *   registers and clear the dirty bit. This ensure that the host can
- *   now use the debug registers.
- */
 static bool trap_debug_regs(struct kvm_vcpu *vcpu,
 			    struct sys_reg_params *p,
 			    const struct sys_reg_desc *r)
 {
 	access_rw(vcpu, p, r);
-	if (p->is_write)
-		vcpu_set_flag(vcpu, DEBUG_DIRTY);
 
 	kvm_debug_set_guest_ownership(vcpu);
 	return true;
@@ -665,9 +636,6 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
  *
  * A 32 bit write to a debug register leave top bits alone
  * A 32 bit read from a debug register only returns the bottom bits
- *
- * All writes will set the DEBUG_DIRTY flag to ensure the hyp code
- * switches between host and guest values in future.
  */
 static void reg_to_dbg(struct kvm_vcpu *vcpu,
 		       struct sys_reg_params *p,
@@ -684,7 +652,6 @@ static void reg_to_dbg(struct kvm_vcpu *vcpu,
 	*dbg_reg = val;
 
 	kvm_debug_set_guest_ownership(vcpu);
-	vcpu_set_flag(vcpu, DEBUG_DIRTY);
 }
 
 static void dbg_to_reg(struct kvm_vcpu *vcpu,
Signature · 1 line
2.39.5
#14 lore raw

PATCH v4 12/19 KVM: arm64: Reload vCPU for accesses to OSLAR_EL1

In reply to Oliver Upton

KVM takes ownership of the debug regs if the guest enables the OS lock, as it needs to use MDSCR_EL1 to mask debug exceptions. Just reload the vCPU if the guest toggles the OS lock, relying on kvm_vcpu_load_debug() to update the debug owner and get the right trap configuration in place.

---
 arch/arm64/include/asm/kvm_host.h |  1 +
 arch/arm64/kvm/debug.c            | 13 +++++++++++++
 arch/arm64/kvm/sys_regs.c         |  9 +--------
 3 files changed, 15 insertions(+), 8 deletions(-)
arch/arm64/include/asm/kvm_host.h +1 -0
index a6796a952af7..d61b8ed32a21 100644
@@ -1346,6 +1346,7 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
 void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
+void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val);
 
 #define kvm_vcpu_os_lock_enabled(vcpu)		\
 	(!!(__vcpu_sys_reg(vcpu, OSLSR_EL1) & OSLSR_EL1_OSLK))
arch/arm64/kvm/debug.c +13 -0
index 300ea3720bed..bf348c86758f 100644
@@ -292,3 +292,16 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.debug_owner = VCPU_DEBUG_GUEST_OWNED;
 }
+
+void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val)
+{
+	if (val & OSLAR_EL1_OSLK)
+		__vcpu_sys_reg(vcpu, OSLSR_EL1) |= OSLSR_EL1_OSLK;
+	else
+		__vcpu_sys_reg(vcpu, OSLSR_EL1) &= ~OSLSR_EL1_OSLK;
+
+	preempt_disable();
+	kvm_arch_vcpu_put(vcpu);
+	kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	preempt_enable();
+}
arch/arm64/kvm/sys_regs.c +1 -8
index 66db77fb6201..ed4adbf5a25e 100644
@@ -570,17 +570,10 @@ static bool trap_oslar_el1(struct kvm_vcpu *vcpu,
 			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
 {
-	u64 oslsr;
-
 	if (!p->is_write)
 		return read_from_write_only(vcpu, p, r);
 
-	/* Forward the OSLK bit to OSLSR */
-	oslsr = __vcpu_sys_reg(vcpu, OSLSR_EL1) & ~OSLSR_EL1_OSLK;
-	if (p->regval & OSLAR_EL1_OSLK)
-		oslsr |= OSLSR_EL1_OSLK;
-
-	__vcpu_sys_reg(vcpu, OSLSR_EL1) = oslsr;
+	kvm_debug_handle_oslar(vcpu, p->regval);
 	return true;
 }
 
Signature · 1 line
2.39.5
#15 lore raw

PATCH v4 13/19 KVM: arm64: Compute MDCR_EL2 at vcpu_load()

In reply to Oliver Upton

KVM has picked up several hacks to cope with vcpu->arch.mdcr_el2 needing to be prepared before vcpu_load(), which is when it gets programmed into hardware on VHE.

Now that the flows for reprogramming MDCR_EL2 have been simplified, move that computation to vcpu_load().

---
 arch/arm64/include/asm/kvm_host.h |  1 -
 arch/arm64/kvm/arm.c              |  2 --
 arch/arm64/kvm/debug.c            | 21 ++++-----------------
 3 files changed, 4 insertions(+), 20 deletions(-)
arch/arm64/include/asm/kvm_host.h +0 -1
index d61b8ed32a21..c630d59e7f4c 100644
@@ -1341,7 +1341,6 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 
 void kvm_init_host_debug_data(void);
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
arch/arm64/kvm/arm.c +0 -2
index 44a6093b0d9e..ec581aeb41f9 100644
@@ -804,8 +804,6 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 
 	kvm_init_mpidr_data(kvm);
 
-	kvm_arm_vcpu_init_debug(vcpu);
-
 	if (likely(irqchip_in_kernel(kvm))) {
 		/*
 		 * Map the VGIC hardware resources before running a vcpu the
arch/arm64/kvm/debug.c +4 -17
index bf348c86758f..900a63030fda 100644
@@ -98,20 +98,6 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 	preempt_enable();
 }
 
-/**
- * kvm_arm_vcpu_init_debug - setup vcpu debug traps
- *
- * @vcpu:	the vcpu pointer
- *
- * Set vcpu initial mdcr_el2 value.
- */
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
-{
-	preempt_disable();
-	kvm_arm_setup_mdcr_el2(vcpu);
-	preempt_enable();
-}
-
 /**
  * kvm_arm_setup_debug - set up debug related stuff
  *
@@ -129,12 +115,10 @@ void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
 
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 {
-	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
+	unsigned long mdscr;
 
 	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
 
-	kvm_arm_setup_mdcr_el2(vcpu);
-
 	/* Check if we need to use the debug registers. */
 	if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
 		/* Save guest debug state */
@@ -277,6 +261,8 @@ void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu)
 		else
 			vcpu->arch.debug_owner = VCPU_DEBUG_FREE;
 	}
+
+	kvm_arm_setup_mdcr_el2(vcpu);
 }
 
 /*
@@ -291,6 +277,7 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->arch.debug_owner = VCPU_DEBUG_GUEST_OWNED;
+	kvm_arm_setup_mdcr_el2(vcpu);
 }
 
 void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val)
Signature · 1 line
2.39.5
#16 lore raw

PATCH v4 14/19 KVM: arm64: Don't hijack guest context MDSCR_EL1

In reply to Oliver Upton

Stealing MDSCR_EL1 in the guest's kvm_cpu_context for external debugging is rather gross. Just add a field for this instead and let the context switch code pick the correct one based on the debug owner.

---
 arch/arm64/include/asm/kvm_host.h          |  2 +-
 arch/arm64/kvm/debug.c                     | 73 +++++++++++-----------
 arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 39 ++++++++----
 3 files changed, 64 insertions(+), 50 deletions(-)
arch/arm64/include/asm/kvm_host.h +1 -1
index c630d59e7f4c..e7036096d9c2 100644
@@ -751,6 +751,7 @@ struct kvm_vcpu_arch {
 	 */
 	struct kvm_guest_debug_arch vcpu_debug_state;
 	struct kvm_guest_debug_arch external_debug_state;
+	u64 external_mdscr_el1;
 
 	enum {
 		VCPU_DEBUG_FREE,
@@ -771,7 +772,6 @@ struct kvm_vcpu_arch {
 	 * are using guest debug.
 	 */
 	struct {
-		u32	mdscr_el1;
 		bool	pstate_ss;
 	} guest_debug_preserved;
 
arch/arm64/kvm/debug.c +36 -37

103 lines not on this page · raw message

arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h +27 -12
index a998b2f6abcb..76ff095c6b6e 100644
@@ -18,9 +18,34 @@
 
 static inline bool ctxt_has_s1poe(struct kvm_cpu_context *ctxt);
 
+static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
+
+	if (!vcpu)
+		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
+
+	return vcpu;
+}
+
+static inline bool ctxt_is_guest(struct kvm_cpu_context *ctxt)
+{
+	return host_data_ptr(host_ctxt) != ctxt;
+}
+
+static inline u64 *ctxt_mdscr_el1(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt_to_vcpu(ctxt);
+
+	if (ctxt_is_guest(ctxt) && kvm_host_owns_debug_regs(vcpu))
+		return &vcpu->arch.external_mdscr_el1;
+
+	return &ctxt_sys_reg(ctxt, MDSCR_EL1);
+}
+
 static inline void __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
 {
-	ctxt_sys_reg(ctxt, MDSCR_EL1)	= read_sysreg(mdscr_el1);
+	*ctxt_mdscr_el1(ctxt)	= read_sysreg(mdscr_el1);
 
 	// POR_EL0 can affect uaccess, so must be saved/restored early.
 	if (ctxt_has_s1poe(ctxt))
@@ -33,16 +58,6 @@ static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
 	ctxt_sys_reg(ctxt, TPIDRRO_EL0)	= read_sysreg(tpidrro_el0);
 }
 
-static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
-{
-	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
-
-	if (!vcpu)
-		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
-
-	return vcpu;
-}
-
 static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
 {
 	struct kvm_vcpu *vcpu = ctxt_to_vcpu(ctxt);
@@ -139,7 +154,7 @@ static inline void __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt)
 
 static inline void __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
 {
-	write_sysreg(ctxt_sys_reg(ctxt, MDSCR_EL1),  mdscr_el1);
+	write_sysreg(*ctxt_mdscr_el1(ctxt),  mdscr_el1);
 
 	// POR_EL0 can affect uaccess, so must be saved/restored early.
 	if (ctxt_has_s1poe(ctxt))
Signature · 1 line
2.39.5
#17 lore raw

PATCH v4 15/19 KVM: arm64: Manage software step state at load/put

In reply to Oliver Upton

KVM takes over the guest's software step state machine if the VMM is debugging the guest, but it does the save/restore fiddling for every guest entry.

Note that the only constraint on host usage of software step is that the guest's configuration remains visible to userspace via the ONE_REG ioctls. So, we can cut down on the amount of fiddling by doing this at load/put instead.

---
 arch/arm64/include/asm/kvm_host.h |  24 ++---
 arch/arm64/kvm/arm.c              |   4 +-
 arch/arm64/kvm/debug.c            | 151 ++++++++----------------------
 arch/arm64/kvm/guest.c            |   2 +-
 arch/arm64/kvm/handle_exit.c      |   2 +-
 5 files changed, 48 insertions(+), 135 deletions(-)
arch/arm64/include/asm/kvm_host.h +7 -17
index e7036096d9c2..d48516de778d 100644
@@ -764,17 +764,6 @@ struct kvm_vcpu_arch {
 	struct arch_timer_cpu timer_cpu;
 	struct kvm_pmu pmu;
 
-	/*
-	 * Guest registers we preserve during guest debugging.
-	 *
-	 * These shadow registers are updated by the kvm_handle_sys_reg
-	 * trap handler if the guest accesses or updates them while we
-	 * are using guest debug.
-	 */
-	struct {
-		bool	pstate_ss;
-	} guest_debug_preserved;
-
 	/* vcpu power state */
 	struct kvm_mp_state mp_state;
 	spinlock_t mp_state_lock;
@@ -924,12 +913,14 @@ struct kvm_vcpu_arch {
 #define IN_WFIT			__vcpu_single_flag(sflags, BIT(1))
 /* vcpu system registers loaded on physical CPU */
 #define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(2))
-/* Software step state is Active-pending */
-#define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(3))
+/* Software step state is Active-pending for external debug */
+#define HOST_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(3))
+/* Software step state is Active pending for guest debug */
+#define GUEST_SS_ACTIVE_PENDING __vcpu_single_flag(sflags, BIT(4))
 /* PMUSERENR for the guest EL0 is on physical CPU */
-#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(4))
+#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(5))
 /* WFI instruction trapped */
-#define IN_WFI			__vcpu_single_flag(sflags, BIT(5))
+#define IN_WFI			__vcpu_single_flag(sflags, BIT(6))
 
 
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
@@ -1341,9 +1332,8 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 
 void kvm_init_host_debug_data(void);
-void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
-void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
+void kvm_vcpu_put_debug(struct kvm_vcpu *vcpu);
 void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
 void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val);
 
arch/arm64/kvm/arm.c +1 -3
index ec581aeb41f9..563cd0b626b9 100644
@@ -622,6 +622,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	kvm_vcpu_put_debug(vcpu);
 	kvm_arch_vcpu_put_fp(vcpu);
 	if (has_vhe())
 		kvm_vcpu_put_vhe(vcpu);
@@ -1181,7 +1182,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 			continue;
 		}
 
-		kvm_arm_setup_debug(vcpu);
 		kvm_arch_vcpu_ctxflush_fp(vcpu);
 
 		/**************************************************************
@@ -1198,8 +1198,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * Back from guest
 		 *************************************************************/
 
-		kvm_arm_clear_debug(vcpu);
-
 		/*
 		 * We must sync the PMU state before the vgic state so
 		 * that the vgic can properly sample the updated state of the
arch/arm64/kvm/debug.c +38 -113

181 lines not on this page · raw message

arch/arm64/kvm/guest.c +1 -1
index 1fe097c67766..2196979a24a3 100644
@@ -924,7 +924,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 
 	if (!(dbg->control & KVM_GUESTDBG_ENABLE)) {
 		vcpu->guest_debug = 0;
-		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		vcpu_clear_flag(vcpu, HOST_SS_ACTIVE_PENDING);
 		return 0;
 	}
 
arch/arm64/kvm/handle_exit.c +1 -1
index d7c2990e7c9e..1e302f0c8903 100644
@@ -193,7 +193,7 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
 		run->debug.arch.far = vcpu->arch.fault.far_el2;
 		break;
 	case ESR_ELx_EC_SOFTSTP_LOW:
-		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
 		break;
 	}
 
Signature · 1 line
2.39.5
#18 lore raw

PATCH v4 16/19 KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions

In reply to Oliver Upton

Inject debug exceptions into vEL2 if MDCR_EL2.TDE is set.

---
 arch/arm64/include/asm/kvm_nested.h |  1 +
 arch/arm64/kvm/emulate-nested.c     | 23 +++++++++++++++++++----
 arch/arm64/kvm/handle_exit.c        |  3 +++
 3 files changed, 23 insertions(+), 4 deletions(-)
arch/arm64/include/asm/kvm_nested.h +1 -0
index 233e65522716..ec6e28d63d26 100644
@@ -64,6 +64,7 @@ static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0)
 }
 
 extern bool forward_smc_trap(struct kvm_vcpu *vcpu);
+extern bool forward_debug_exception(struct kvm_vcpu *vcpu);
 extern void kvm_init_nested(struct kvm *kvm);
 extern int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu);
 extern void kvm_init_nested_s2_mmu(struct kvm_s2_mmu *mmu);
arch/arm64/kvm/emulate-nested.c +19 -4
index 1ffbfd1c3cf2..e37fb598cc24 100644
@@ -2345,14 +2345,14 @@ bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 	return true;
 }
 
-static bool forward_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+static bool __forward_traps(struct kvm_vcpu *vcpu, unsigned int reg, u64 control_bit)
 {
 	bool control_bit_set;
 
 	if (!vcpu_has_nv(vcpu))
 		return false;
 
-	control_bit_set = __vcpu_sys_reg(vcpu, HCR_EL2) & control_bit;
+	control_bit_set = __vcpu_sys_reg(vcpu, reg) & control_bit;
 	if (!is_hyp_ctxt(vcpu) && control_bit_set) {
 		kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
 		return true;
@@ -2360,9 +2360,24 @@ static bool forward_traps(struct kvm_vcpu *vcpu, u64 control_bit)
 	return false;
 }
 
+static bool forward_hcr_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+{
+	return __forward_traps(vcpu, HCR_EL2, control_bit);
+}
+
 bool forward_smc_trap(struct kvm_vcpu *vcpu)
 {
-	return forward_traps(vcpu, HCR_TSC);
+	return forward_hcr_traps(vcpu, HCR_TSC);
+}
+
+static bool forward_mdcr_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+{
+	return __forward_traps(vcpu, MDCR_EL2, control_bit);
+}
+
+bool forward_debug_exception(struct kvm_vcpu *vcpu)
+{
+	return forward_mdcr_traps(vcpu, MDCR_EL2_TDE);
 }
 
 static u64 kvm_check_illegal_exception_return(struct kvm_vcpu *vcpu, u64 spsr)
@@ -2406,7 +2421,7 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
 	 * Forward this trap to the virtual EL2 if the virtual
 	 * HCR_EL2.NV bit is set and this is coming from !EL2.
 	 */
-	if (forward_traps(vcpu, HCR_NV))
+	if (forward_hcr_traps(vcpu, HCR_NV))
 		return;
 
 	spsr = vcpu_read_sys_reg(vcpu, SPSR_EL2);
arch/arm64/kvm/handle_exit.c +3 -0
index 1e302f0c8903..512d152233ff 100644
@@ -183,6 +183,9 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
 	struct kvm_run *run = vcpu->run;
 	u64 esr = kvm_vcpu_get_esr(vcpu);
 
+	if (!vcpu->guest_debug && forward_debug_exception(vcpu))
+		return 1;
+
 	run->exit_reason = KVM_EXIT_DEBUG;
 	run->debug.arch.hsr = lower_32_bits(esr);
 	run->debug.arch.hsr_high = upper_32_bits(esr);
Signature · 1 line
2.39.5
#19 lore raw

PATCH v4 17/19 KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore

In reply to Oliver Upton

Similar to other per-CPU profiling/debug features we handle, store the number of breakpoints/watchpoints in kvm_host_data to avoid reading the ID register 4 times on every guest entry/exit. And if you're in the nested virt business that's quite a few avoidable exits to the L0 hypervisor.

---
 arch/arm64/include/asm/kvm_host.h         |  4 ++++
 arch/arm64/kvm/debug.c                    |  3 +++
 arch/arm64/kvm/hyp/include/hyp/debug-sr.h | 17 ++++-------------
 3 files changed, 11 insertions(+), 13 deletions(-)
arch/arm64/include/asm/kvm_host.h +4 -0
index d48516de778d..e7c740c99ee3 100644
@@ -661,6 +661,10 @@ struct kvm_host_data {
 
 	/* Number of programmable event counters (PMCR_EL0.N) for this CPU */
 	unsigned int nr_event_counters;
+
+	/* Number of debug breakpoints/watchpoints for this CPU (minus 1) */
+	unsigned int debug_brps;
+	unsigned int debug_wrps;
 };
 
 struct kvm_host_psci_config {
arch/arm64/kvm/debug.c +3 -0
index 7d3c71d65518..d921e7f7bd59 100644
@@ -71,6 +71,9 @@ void kvm_init_host_debug_data(void)
 		*host_data_ptr(nr_event_counters) = FIELD_GET(ARMV8_PMU_PMCR_N,
 							      read_sysreg(pmcr_el0));
 
+	*host_data_ptr(debug_brps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, BRPs, dfr0);
+	*host_data_ptr(debug_wrps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, WRPs, dfr0);
+
 	if (has_vhe())
 		return;
 
arch/arm64/kvm/hyp/include/hyp/debug-sr.h +4 -13
index c14586d87361..502a5b73ee70 100644
@@ -106,12 +106,8 @@ static struct kvm_guest_debug_arch *__vcpu_debug_regs(struct kvm_vcpu *vcpu)
 static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
 			       struct kvm_cpu_context *ctxt)
 {
-	u64 aa64dfr0;
-	int brps, wrps;
-
-	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
-	brps = (aa64dfr0 >> 12) & 0xf;
-	wrps = (aa64dfr0 >> 20) & 0xf;
+	int brps = *host_data_ptr(debug_brps);
+	int wrps = *host_data_ptr(debug_wrps);
 
 	save_debug(dbg->dbg_bcr, dbgbcr, brps);
 	save_debug(dbg->dbg_bvr, dbgbvr, brps);
@@ -124,13 +120,8 @@ static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
 static void __debug_restore_state(struct kvm_guest_debug_arch *dbg,
 				  struct kvm_cpu_context *ctxt)
 {
-	u64 aa64dfr0;
-	int brps, wrps;
-
-	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
-
-	brps = (aa64dfr0 >> 12) & 0xf;
-	wrps = (aa64dfr0 >> 20) & 0xf;
+	int brps = *host_data_ptr(debug_brps);
+	int wrps = *host_data_ptr(debug_wrps);
 
 	restore_debug(dbg->dbg_bcr, dbgbcr, brps);
 	restore_debug(dbg->dbg_bvr, dbgbvr, brps);
Signature · 1 line
2.39.5
#20 lore raw

PATCH v4 18/19 KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set

In reply to Oliver Upton

There is a nauseating amount of boilerplate for accessing the breakpoint and watchpoint registers. Fold everything together into a single set of accessors and select the right storage based on the sysreg encoding.

---
 arch/arm64/kvm/sys_regs.c | 197 +++++++++++++-------------------------
 1 file changed, 69 insertions(+), 128 deletions(-)
arch/arm64/kvm/sys_regs.c +69 -128
index ed4adbf5a25e..d9c7911ec58a 100644
@@ -658,143 +658,78 @@ static void dbg_to_reg(struct kvm_vcpu *vcpu,
 	p->regval = (*dbg_reg & mask) >> shift;
 }
 
-static bool trap_bvr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
-{
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
-
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	return true;
-}
-
-static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = val;
-	return 0;
-}
-
-static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
-	return 0;
+static u64 *demux_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd)
+{
+	struct kvm_guest_debug_arch *dbg = &vcpu->arch.vcpu_debug_state;
+
+	switch (rd->Op2) {
+	case 0b100:
+		return &dbg->dbg_bvr[rd->CRm];
+	case 0b101:
+		return &dbg->dbg_bcr[rd->CRm];
+	case 0b110:
+		return &dbg->dbg_wvr[rd->CRm];
+	case 0b111:
+		return &dbg->dbg_wcr[rd->CRm];
+	default:
+		KVM_BUG_ON(1, vcpu->kvm);
+		return NULL;
+	}
 }
 
-static u64 reset_bvr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
+static bool trap_dbg_wb_reg(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			    const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = rd->val;
-	return rd->val;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static bool trap_bcr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
-{
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
+	if (!reg)
+		return false;
 
 	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
+		reg_to_dbg(vcpu, p, rd, reg);
 	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
+		dbg_to_reg(vcpu, p, rd, reg);
 
 	return true;
 }
 
-static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = val;
-	return 0;
-}
-
-static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
-	return 0;
-}
-
-static u64 reset_bcr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
+static int set_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			  u64 val)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = rd->val;
-	return rd->val;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static bool trap_wvr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
-{
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
-
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	return true;
-}
-
-static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = val;
-	return 0;
-}
+	if (!reg)
+		return -EINVAL;
 
-static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
+	*reg = val;
 	return 0;
 }
 
-static u64 reset_wvr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = rd->val;
-	return rd->val;
-}
-
-static bool trap_wcr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
+static int get_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			  u64 *val)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
-
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-	return true;
-}
+	if (!reg)
+		return -EINVAL;
 
-static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = val;
+	*val = *reg;
 	return 0;
 }
 
-static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
+static u64 reset_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd)
 {
-	*val = vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
-	return 0;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static u64 reset_wcr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = rd->val;
+	/*
+	 * Bail early if we couldn't find storage for the register, the
+	 * KVM_BUG_ON() in demux_wb_reg() will prevent this VM from ever
+	 * being run.
+	 */
+	if (!reg)
+		return 0;
+
+	*reg = rd->val;
 	return rd->val;
 }
 
@@ -1303,13 +1238,17 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
 	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
-	  trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
-	  trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
-	  trap_wvr, reset_wvr, 0, 0,  get_wvr, set_wvr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
-	  trap_wcr, reset_wcr, 0, 0,  get_wcr, set_wcr }
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg }
 
 #define PMU_SYS_REG(name)						\
 	SYS_DESC(SYS_##name), .reset = reset_pmu_reg,			\
@@ -3523,18 +3462,20 @@ static bool trap_dbgdidr(struct kvm_vcpu *vcpu,
  * None of the other registers share their location, so treat them as
  * if they were 64bit.
  */
-#define DBG_BCR_BVR_WCR_WVR(n)						      \
-	/* DBGBVRn */							      \
-	{ AA32(LO), Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_bvr, NULL, n }, \
-	/* DBGBCRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_bcr, NULL, n },	      \
-	/* DBGWVRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_wvr, NULL, n },	      \
-	/* DBGWCRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_wcr, NULL, n }
-
-#define DBGBXVR(n)							      \
-	{ AA32(HI), Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_bvr, NULL, n }
+#define DBG_BCR_BVR_WCR_WVR(n)							\
+	/* DBGBVRn */								\
+	{ AA32(LO), Op1( 0), CRn( 0), CRm((n)), Op2( 4),			\
+	  trap_dbg_wb_reg, NULL, n },						\
+	/* DBGBCRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_dbg_wb_reg, NULL, n },	\
+	/* DBGWVRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_dbg_wb_reg, NULL, n },	\
+	/* DBGWCRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_dbg_wb_reg, NULL, n }
+
+#define DBGBXVR(n)								\
+	{ AA32(HI), Op1( 0), CRn( 1), CRm((n)), Op2( 1),			\
+	  trap_dbg_wb_reg, NULL, n }
 
 /*
  * Trapped cp14 registers. We generally ignore most of the external
Signature · 1 line
2.39.5
#21 lore raw

PATCH v4 19/19 KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads

In reply to Oliver Upton

Only yielding control of the debug registers for writes is a bit silly, unless of course you're a fan of pointless traps. Give control of the debug registers to the guest upon the first access, regardless of direction.

---
 arch/arm64/kvm/sys_regs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm64/kvm/sys_regs.c +1 -2
index d9c7911ec58a..aac79e34cd50 100644
@@ -643,8 +643,6 @@ static void reg_to_dbg(struct kvm_vcpu *vcpu,
 	val &= ~mask;
 	val |= (p->regval & (mask >> shift)) << shift;
 	*dbg_reg = val;
-
-	kvm_debug_set_guest_ownership(vcpu);
 }
 
 static void dbg_to_reg(struct kvm_vcpu *vcpu,
@@ -690,6 +688,7 @@ static bool trap_dbg_wb_reg(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	else
 		dbg_to_reg(vcpu, p, rd, reg);
 
+	kvm_debug_set_guest_ownership(vcpu);
 	return true;
 }
 
Signature · 1 line
2.39.5
maintainer Applied
#22 lore raw
In reply to Oliver Upton
Quoted 10 lines · Oliver Upton

Hopefully the last spin! Addressed some review comments, and snuck in one more cleanup to the sysreg handlers since that was quite a mess too.

v3 -> v4:
- Collect Tested-by tags from James (thanks!)
- Delete stray if condition, second attempt (Marc)
- Hoist writes to MDCR_EL2 into kvm_arm_setup_mdcr_el2()
- Get rid of the sysreg accessor mess for DBGxVR/DBGxCR

[...]

Applied to next, with a couple of intermediate changes to make it bisect without errors or warnings.

[01/19] KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK

        commit: 8ca19c40c47d80af369c222662445bbf593666b1
[02/19] KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts
        commit: 2417218f2f234fd7880fb193ebf3ae5fcccfa29b
[03/19] KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU
        commit: 38131c02a53ff691e4c496d65d2d087a5ed42bbf
[04/19] KVM: arm64: Move host SME/SVE tracking flags to host data
        commit: d381e53384a69e35aac417cd6e66afc6c8c11583
[05/19] KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2()
        commit: b47ffd13fda8275733d573e5799e63e66b5f5361
[06/19] KVM: arm64: Evaluate debug owner at vcpu_load()
        commit: cd9b10102ae38bf0e10b13dbb98c3ead42cf8e1b
[07/19] KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler
        commit: 4cefbec97d80247083b84ccc86e32a78c119f705
[08/19] KVM: arm64: Select debug state to save/restore based on debug owner
        commit: 58db67e9accca6d146916203a943568f63754697
[09/19] KVM: arm64: Remove debug tracepoints
        commit: 3b7780945cc8494793040ab0a9805b77b7826abb
[10/19] KVM: arm64: Remove vestiges of debug_ptr
        commit: 803602b0d94168bd25f5ff6eafdfd9388a6dd2ec
[11/19] KVM: arm64: Use debug_owner to track if debug regs need save/restore
        commit: beb470d96cec8dd8f4e05b2135c74d828f7b114b
[12/19] KVM: arm64: Reload vCPU for accesses to OSLAR_EL1
        commit: 06d22a9c1b94006ebfa67693a38baed86b9a75e8
[13/19] KVM: arm64: Compute MDCR_EL2 at vcpu_load()
        commit: 75a5fbaf6623328d3ac69719145c2247f7b4e299
[14/19] KVM: arm64: Don't hijack guest context MDSCR_EL1
        commit: 4ad3a0b87f2ec4714fdfa6bd5de57b4c30e15753
[15/19] KVM: arm64: Manage software step state at load/put
        commit: 2ca3f03bf524c98afa421c479689f1e7dc030bf0
[16/19] KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions
        commit: b0ee51033ae35461ae98c465426f0002b8370679
[17/19] KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore
        commit: 8c02c2bbd64375e603df79449f0eb2c57e1a597c
[18/19] KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set
        commit: 3ce9f3357e9e099f02feaa002769eb99ef1138cd
[19/19] KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads
        commit: c4a6ed85455979ef3fbadc2f1bdf18734b0ecea6

Cheers,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
#12 lore raw

Re: [PATCH v4 11/19] KVM: arm64: Use debug_owner to track if debug regs need save/restore

In reply to Oliver Upton
Quoted 8 lines · Oliver Upton

Use the debug owner to determine if the debug regs are in use instead of keeping around the DEBUG_DIRTY flag. Debug registers are now saved/restored after the first trap, regardless of whether it was a read or a write. This also shifts the point at which KVM becomes lazy to vcpu_put() rather than the next exception taken from the guest.

We've started seeing issues on TX2 with the KVM debug-exceptions kselftest in pKVM boots:

# selftests: kvm: debug-exceptions
# Random seed: 0x6b8b4567
# ==== Test Assertion Failure ====
# arm64/debug-exceptions.c:368: ss_idx < 4
# pid=2828 tid=2828 errno=4 - Interrupted system call
# sh: 1: addr2line: not found
# Expected index < 4, got '4'
not ok 3 selftests: kvm: debug-exceptions # exit=254

The same test runs fine booting the same build on the same hardware in VHE mode. Bisection points to this commit, I've not done any analysis beyond that beyond a brief check that things look plausibly relevant:

git bisect start
# status: waiting for both good and bad commits
# bad: [a13f6e0f405ed0d3bcfd37c692c7d7fa3c052154] Add linux-next specific files for 20250130
git bisect bad a13f6e0f405ed0d3bcfd37c692c7d7fa3c052154
# status: waiting for good commit(s), bad commit known
# bad: [d052e062c5a1186da8897bdab185688b9b13759a] Merge branch 'for-linux-next-fixes' of https://gitlab.freedesktop.org/drm/misc/kernel.git
git bisect bad d052e062c5a1186da8897bdab185688b9b13759a
# status: waiting for good commit(s), bad commit known
# bad: [72deda0abee6e705ae71a93f69f55e33be5bca5c] Merge tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
git bisect bad 72deda0abee6e705ae71a93f69f55e33be5bca5c
# status: waiting for good commit(s), bad commit known
# good: [adc218676eef25575469234709c2d87185ca223a] Linux 6.12
git bisect good adc218676eef25575469234709c2d87185ca223a
# good: [04b43ea325d21c4c98e831383a1b7d540721898a] Merge tag 'ubifs-for-linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
git bisect good 04b43ea325d21c4c98e831383a1b7d540721898a
# good: [0ad9617c78acbc71373fb341a6f75d4012b01d69] Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
git bisect good 0ad9617c78acbc71373fb341a6f75d4012b01d69
# good: [f10203927097ff9e5a251f170038fefa38e274b7] Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
git bisect good f10203927097ff9e5a251f170038fefa38e274b7
# good: [9c5968db9e625019a0ee5226c7eebef5519d366a] Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
git bisect good 9c5968db9e625019a0ee5226c7eebef5519d366a
# good: [13845bdc869f136f92ad3d40ea09b867bb4ce467] Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
git bisect good 13845bdc869f136f92ad3d40ea09b867bb4ce467
# bad: [58f504efcda54a9079a38203acc088c3354aaa60] Merge tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
git bisect bad 58f504efcda54a9079a38203acc088c3354aaa60
# good: [a37eea94f775132866ecdd466fd88027d7125515] Merge tag 'sparc-for-6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
git bisect good a37eea94f775132866ecdd466fd88027d7125515
# bad: [5e68d2eeac70978a06406c5b156815ceb00437f9] Merge branch kvm-arm64/pkvm-memshare-declutter into kvmarm-master/next
git bisect bad 5e68d2eeac70978a06406c5b156815ceb00437f9
# bad: [d0670128d42fa170bf8ba878cd23504c5c5cccc7] Merge branch kvm-arm64/pkvm-np-guest into kvmarm-master/next
git bisect bad d0670128d42fa170bf8ba878cd23504c5c5cccc7
# bad: [c4a6ed85455979ef3fbadc2f1bdf18734b0ecea6] KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads
git bisect bad c4a6ed85455979ef3fbadc2f1bdf18734b0ecea6
# good: [3b7780945cc8494793040ab0a9805b77b7826abb] KVM: arm64: Remove debug tracepoints
git bisect good 3b7780945cc8494793040ab0a9805b77b7826abb
# bad: [4ad3a0b87f2ec4714fdfa6bd5de57b4c30e15753] KVM: arm64: Don't hijack guest context MDSCR_EL1
git bisect bad 4ad3a0b87f2ec4714fdfa6bd5de57b4c30e15753
# bad: [beb470d96cec8dd8f4e05b2135c74d828f7b114b] KVM: arm64: Use debug_owner to track if debug regs need save/restore
git bisect bad beb470d96cec8dd8f4e05b2135c74d828f7b114b
# good: [803602b0d94168bd25f5ff6eafdfd9388a6dd2ec] KVM: arm64: Remove vestiges of debug_ptr
git bisect good 803602b0d94168bd25f5ff6eafdfd9388a6dd2ec

# first bad commit: [beb470d96cec8dd8f4e05b2135c74d828f7b114b] KVM: arm64: Use debug_owner to track if debug regs need save/restore
#13 lore raw

Re: [PATCH v4 11/19] KVM: arm64: Use debug_owner to track if debug regs need save/restore

Quoted 8 lines · Mark Brown
Quoted 6 lines · Oliver Upton

Use the debug owner to determine if the debug regs are in use instead of keeping around the DEBUG_DIRTY flag. Debug registers are now saved/restored after the first trap, regardless of whether it was a read or a write. This also shifts the point at which KVM becomes lazy to vcpu_put() rather than the next exception taken from the guest.

Quoted 5 lines
Quoted 2 lines

We've started seeing issues on TX2 with the KVM debug-exceptions kselftest in pKVM boots:

Thanks for catching this. Just put a fix on the list [*], hopefully Marc can pick it up sometime soon.

[*]: https://lore.kernel.org/kvmarm/[email protected]/

Signature · 2 lines
Thanks,
Oliver