Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922

A new machine has a Archer AX3000 / TX55e in it,
and out the box reported issues resetting hci0. It looks like this is a MT7922 from the lspci output, so treat it as a MediaTek device and use the proper callbacks. With that in place an xbox controller can be used without issue as seen below:

    [    7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
    [    9.583883] Bluetooth: hci0: Device setup in 2582842 usecs
    [    9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
    [    9.644780] Bluetooth: hci0: AOSP extensions version v1.00
    [    9.644784] Bluetooth: hci0: AOSP quality report is supported
    [  876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27
    [  876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7
    [  876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28
    [  876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7

lspci output:

    root@livingroom:/home/ajhalaney/git# lspci
    ...
    05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

and USB device:

    root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices
    ...
    T:  Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
    D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=13d3 ProdID=3610 Rev= 1.00
    S:  Manufacturer=MediaTek Inc.
    S:  Product=Wireless_Device
    S:  SerialNumber=000000000
    C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
    A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
    I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

---
I'm mostly following similar patterns here to set this up, and am not sure how to validate the WIDEBAND setting is appropriate (but based on the other entry it seems it should be).

Thanks,
Andrew

---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

index 279fe6c115fac51dd941eee2d496392917e083cd..ce534c212431157a382fce75f2b6657b6c9c6c96 100644
@@ -610,6 +610,8 @@ static const struct usb_device_id quirks_table[] = {
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3610), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* MediaTek MT7922A Bluetooth devices */
 	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |

---
base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
change-id: 20241224-tx55e-bluetooth-3a35440b0307

Best regards,

Andrew Halaney <[email protected]>

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=920794

---Test result---

Test Summary:

CheckPatch                    PENDING   0.36 seconds
GitLint                       PENDING   0.29 seconds
SubjectPrefix                 PASS      0.07 seconds
BuildKernel                   PASS      24.99 seconds
CheckAllWarning               PASS      27.59 seconds
CheckSparse                   PASS      30.74 seconds
BuildKernel32                 PASS      24.55 seconds
TestRunnerSetup               PASS      436.09 seconds
TestRunner_l2cap-tester       PASS      20.48 seconds
TestRunner_iso-tester         PASS      29.95 seconds
TestRunner_bnep-tester        PASS      4.78 seconds
TestRunner_mgmt-tester        FAIL      119.56 seconds
TestRunner_rfcomm-tester      PASS      7.63 seconds
TestRunner_sco-tester         PASS      9.32 seconds
TestRunner_ioctl-tester       PASS      8.13 seconds
TestRunner_mesh-tester        PASS      5.95 seconds
TestRunner_smp-tester         PASS      7.00 seconds
TestRunner_userchan-tester    PASS      4.99 seconds
IncrementalBuild              PENDING   0.86 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 490, Passed: 485 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
LL Privacy - Set Flags 3 (2 Devices to RL) Failed 0.181 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:

---
Regards,
Linux Bluetooth