Skip to contentSkip to conversation

dt-bindings: arm:rockchip: Add BigTreeTech CB2 and Pi2

PATCH Superseded Ivan Sergeev 2 participants 2 messages Dec 24, 2024

Subsystems (2)

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 dt-bindings: arm:rockchip: Add BigTreeTech CB2 and Pi2

BigTreeTech CB2 is a SoM intended for use with BigTreeTech Manta mainboards for 3d printers. BigTreeTech Pi2 is the same hardware in the form of a SBC. They use Rockchip RK3566 SoC.

---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 11 +++++++++++
 1 file changed, 11 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +11 -0
index 753199a12923..349453b1676b 100644
@@ -81,6 +81,17 @@ properties:
           - const: azw,beelink-a1
           - const: rockchip,rk3328
 
+      - description: BigTreeTech CB2 Manta M4/8P
+        items:
+          - const: bigtreetech,cb2-manta
+          - const: bigtreetech,cb2
+          - const: rockchip,rk3566
+
+      - description: BigTreeTech Pi 2
+        items:
+          - const: bigtreetech,pi2
+          - const: rockchip,rk3566
+
       - description: bq Curie 2 tablet
         items:
           - const: mundoreader,bq-curie2
Signature · 7 lines
2.45.2


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
#1 lore raw
Quoted 9 lines · Ivan Sergeev

BigTreeTech CB2 is a SoM intended for use with BigTreeTech Manta mainboards for 3d printers. BigTreeTech Pi2 is the same hardware in the form of a SBC. They use Rockchip RK3566 SoC.

---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 11 +++++++++++
 1 file changed, 11 insertions(+)

<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.

You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time.

Please kindly resend and include all necessary To/Cc entries. </form letter>

Best regards,
Krzysztof

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip