Qcom Geni exit path cleanups
Subsystems (3)
Andi Shyti
maintainerv3 cover Qcom Geni exit path cleanups
Hi,
I am submitting two trivial cleanups in this series. The first replaces all instances of dev_err with dev_err_probe throughout the probe function for consistency. The second improves the error exit path by introducing a single 'goto' label for better maintainability.
Thank you Mukesh and Vladimir for your reviews.
Thank you,
Andi
Changelog:
----------
v2 -> v3:
- Don't forget to assign ret the proper value.
- Add tags in patch 1.
v1 -> v2:
- Updated the final return statement to return 'ret' instead of '0' for consistency. Since 'ret' already holds the value '0', this change is purely aesthetic.
- Renamed the exit label from 'err_off' to 'err_resources' for improved clarity and alignment with its purpose.
Andi Shyti (2):
i2c: qcom-geni: Use dev_err_probe in the probe function
i2c: qcom-geni: Simplify error handling in probe function
drivers/i2c/busses/i2c-qcom-geni.c | 56 ++++++++++++++---------------- 1 file changed, 27 insertions(+), 29 deletions(-)
Signature · 1 line
2.45.2
Andi Shyti
maintainerPATCH v3 1/2 i2c: qcom-geni: Use dev_err_probe in the probe function
Replace classical dev_err with dev_err_probe in the probe function for better error reporting. Also, use dev_err_probe in cases where the error number is clear (e.g., -EIO or -EINVAL) to maintain consistency.
Additionally, remove redundant logging to simplify the code.
--- drivers/i2c/busses/i2c-qcom-geni.c | 33 +++++++++++++----------------- 1 file changed, 14 insertions(+), 19 deletions(-)
drivers/i2c/busses/i2c-qcom-geni.c +14 -19
@@ -823,11 +823,9 @@ static int geni_i2c_probe(struct platform_device *pdev)return gi2c->irq; ret =geni_i2c_clk_map_idx (gi2c); -if (ret) { -dev_err (dev,"Invalid clk frequency %d Hz: %d\n" , - gi2c->clk_freq_out, ret); -return ret; - } +if (ret) +return dev_err_probe (dev, ret,"Invalid clk frequency %d Hz\n" , + gi2c->clk_freq_out); gi2c->adap.algo = &geni_i2c_algo;init_completion (&gi2c->done);
@@ -837,11 +835,10 @@ static int geni_i2c_probe(struct platform_device *pdev)/* Keep interrupts disabled initially to allow for low-power modes */ ret =devm_request_irq (dev, gi2c->irq, geni_i2c_irq,IRQF_NO_AUTOEN ,dev_name (dev), gi2c); -if (ret) { -dev_err (dev,"Request_irq failed:%d: err:%d\n" , - gi2c->irq, ret); -return ret; - } +if (ret) +return dev_err_probe (dev, ret, +"Request_irq failed: %d\n" , gi2c->irq); +i2c_set_adapdata (&gi2c->adap, gi2c); gi2c->adap.dev.parent = dev; gi2c->adap.dev.of_node = dev->of_node;
@@ -870,16 +867,14 @@ static int geni_i2c_probe(struct platform_device *pdev) ret =geni_se_resources_on (&gi2c->se);if (ret) { -dev_err (dev,"Error turning on resources %d\n" , ret);clk_disable_unprepare (gi2c->core_clk); -return ret; +return dev_err_probe (dev, ret,"Error turning on resources\n" ); } proto =geni_se_read_proto (&gi2c->se);if (proto !=GENI_SE_I2C ) { -dev_err (dev,"Invalid proto %d\n" , proto);geni_se_resources_off (&gi2c->se);clk_disable_unprepare (gi2c->core_clk); -return -ENXIO ; +return dev_err_probe (dev, -ENXIO ,"Invalid proto %d\n" , proto); }if (desc && desc->no_dma_support)
@@ -894,7 +889,7 @@ static int geni_i2c_probe(struct platform_device *pdev)if (ret) {geni_se_resources_off (&gi2c->se);clk_disable_unprepare (gi2c->core_clk); -return dev_err_probe (dev, ret,"Failed to setup GPI DMA mode\n" ); +return ret; }dev_dbg (dev,"Using GPI DMA mode for I2C\n" );
@@ -907,10 +902,10 @@ static int geni_i2c_probe(struct platform_device *pdev) tx_depth = desc->tx_fifo_depth;if (!tx_depth) { -dev_err (dev,"Invalid TX FIFO depth\n" );geni_se_resources_off (&gi2c->se);clk_disable_unprepare (gi2c->core_clk); -return -EINVAL ; +return dev_err_probe (dev, -EINVAL , +"Invalid TX FIFO depth\n" ); } gi2c->tx_wm = tx_depth -1 ;
@@ -924,7 +919,7 @@ static int geni_i2c_probe(struct platform_device *pdev)clk_disable_unprepare (gi2c->core_clk); ret =geni_se_resources_off (&gi2c->se);if (ret) { -dev_err (dev,"Error turning off resources %d\n" , ret); +dev_err_probe (dev, ret,"Error turning off resources\n" ); goto err_dma; }
@@ -940,7 +935,7 @@ static int geni_i2c_probe(struct platform_device *pdev) ret =i2c_add_adapter (&gi2c->adap);if (ret) { -dev_err (dev,"Error adding i2c adapter %d\n" , ret); +dev_err_probe (dev, ret,"Error adding i2c adapter\n" );pm_runtime_disable (gi2c->se.dev); goto err_dma; }
Signature · 1 line
2.45.2
Andi Shyti
maintainerPATCH v3 2/2 i2c: qcom-geni: Simplify error handling in probe function
In reply to Andi ShytiAvoid repeating the error handling pattern:
geni_se_resources_off(&gi2c->se);
clk_disable_unprepare(gi2c->core_clk);
return;Introduce a single 'goto' exit label for cleanup in case of errors. While there are currently two distinct exit points, there is no overlap in their handling, allowing both branches to coexist cleanly.
--- drivers/i2c/busses/i2c-qcom-geni.c | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-)
drivers/i2c/busses/i2c-qcom-geni.c +18 -15
@@ -867,14 +867,13 @@ static int geni_i2c_probe(struct platform_device *pdev) ret =geni_se_resources_on (&gi2c->se);if (ret) { -clk_disable_unprepare (gi2c->core_clk); -return dev_err_probe (dev, ret,"Error turning on resources\n" ); +dev_err_probe (dev, ret,"Error turning on resources\n" ); + goto err_clk; } proto =geni_se_read_proto (&gi2c->se);if (proto !=GENI_SE_I2C ) { -geni_se_resources_off (&gi2c->se); -clk_disable_unprepare (gi2c->core_clk); -return dev_err_probe (dev, -ENXIO ,"Invalid proto %d\n" , proto); + ret =dev_err_probe (dev, -ENXIO ,"Invalid proto %d\n" , proto); + goto err_resources; }if (desc && desc->no_dma_support)
@@ -886,11 +885,8 @@ static int geni_i2c_probe(struct platform_device *pdev)/* FIFO is disabled, so we can only use GPI DMA */ gi2c->gpi_mode = true; ret =setup_gpi_dma (gi2c); -if (ret) { -geni_se_resources_off (&gi2c->se); -clk_disable_unprepare (gi2c->core_clk); -return ret; - } +if (ret) + goto err_resources;dev_dbg (dev,"Using GPI DMA mode for I2C\n" ); }else {
@@ -902,10 +898,9 @@ static int geni_i2c_probe(struct platform_device *pdev) tx_depth = desc->tx_fifo_depth;if (!tx_depth) { -geni_se_resources_off (&gi2c->se); -clk_disable_unprepare (gi2c->core_clk); -return dev_err_probe (dev, -EINVAL , -"Invalid TX FIFO depth\n" ); + ret =dev_err_probe (dev, -EINVAL , +"Invalid TX FIFO depth\n" ); + goto err_resources; } gi2c->tx_wm = tx_depth -1 ;
@@ -942,10 +937,18 @@ static int geni_i2c_probe(struct platform_device *pdev)dev_dbg (dev,"Geni-I2C adaptor successfully added\n" ); -return 0 ; +return ret; + +err_resources: +geni_se_resources_off (&gi2c->se); +err_clk: +clk_disable_unprepare (gi2c->core_clk); + +return ret; err_dma:release_gpi_dma (gi2c); +return ret; }
Signature · 1 line
2.45.2
Re: [PATCH v3 2/2] i2c: qcom-geni: Simplify error handling in probe function
Quoted 6 lines · Andi Shyti
Avoid repeating the error handling pattern:
geni_se_resources_off(&gi2c->se); clk_disable_unprepare(gi2c->core_clk); return;
Quoted 6 lines
Introduce a single 'goto' exit label for cleanup in case of errors. While there are currently two distinct exit points, there is no overlap in their handling, allowing both branches to coexist cleanly.
Signed-off-by Andi Shyti <[email protected]>
--
Best wishes,
Vladimir
Re: [PATCH v3 2/2] i2c: qcom-geni: Simplify error handling in probe function
In reply to Andi ShytiQuoted 6 lines · Andi Shyti
Avoid repeating the error handling pattern:
geni_se_resources_off(&gi2c->se); clk_disable_unprepare(gi2c->core_clk); return;
Quoted 6 lines
Introduce a single 'goto' exit label for cleanup in case of errors. While there are currently two distinct exit points, there is no overlap in their handling, allowing both branches to coexist cleanly.
Signed-off-by Andi Shyti <[email protected]>
--
Best wishes,
Vladimir
Hi,
Quoted 3 lines
Andi Shyti (2):
i2c: qcom-geni: Usedev_err_probein the probe function
i2c: qcom-geni: Simplify error handling in probe function
merged to i2c/i2c-host.
Thanks,
Andi