riscv: add Siflower RISC-V SoC family Kconfig support
PATCH v2 1/1 riscv: add Siflower RISC-V SoC family Kconfig support
Siflower RISC-V SoCs, including SF21A6826, SF21H8898 and some other upcomping chips, are RISC-V chips with T-Head C908 cores for home routers and gateways. Add a Kconfig entry named ARCH_SIFLOWER for them.
Notably these chips uses ARM PL011 for UART. ARM_AMBA is selected for its driver.
---
Changes since v1:
* removed deprecated SOC_ symbol
arch/riscv/Kconfig.socs | 6 ++++++ 1 file changed, 6 insertions(+)
arch/riscv/Kconfig.socs +6 -0
@@ -19,6 +19,12 @@ config ARCH_SIFIVE help This enables support for SiFive SoC platform hardware. +config ARCH_SIFLOWER + bool "Siflower RISC-V SoCs" + select ARM_AMBA if TTY + help + This enables support for Siflower RISC-V SoC platform hardware. + config ARCH_SOPHGO bool "Sophgo SoCs" help
Signature · 1 line
2.48.1
Quoted 8 lines · Chuanhong Guo
Siflower RISC-V SoCs, including SF21A6826, SF21H8898 and some other upcomping chips, are RISC-V chips with T-Head C908 cores for home routers and gateways. Add a
Kconfigentry namedARCH_SIFLOWERfor them.
Notably these chips uses ARM PL011 for UART.ARM_AMBAis selected for its driver.Signed-off-by Chuanhong Guo <[email protected]>
This needs to be in a series with the user (your dts)
Quoted 29 lines
---
Changes since v1:
* removed deprecatedSOC_symbolarch/riscv/Kconfig.socs | 6 ++++++ 1 file changed, 6 insertions(+)arch/riscv/Kconfig.socs +6
-0@@ -19,6 +19,12 @@ config ARCH_SIFIVE help This enables support for SiFive SoC platform hardware. +config ARCH_SIFLOWER + bool "Siflower RISC-V SoCs" + select ARM_AMBA if TTY + help + This enables support for Siflower RISC-V SoC platform hardware. + config ARCH_SOPHGO bool "Sophgo SoCs" helpSignature · 1 line
2.48.1
Hello!
Quoted 9 lines · Conor Dooley
Quoted 7 lines · Chuanhong Guo
Siflower RISC-V SoCs, including SF21A6826, SF21H8898 and some other upcomping chips, are RISC-V chips with T-Head C908 cores for home routers and gateways. Add a
Kconfigentry namedARCH_SIFLOWERfor them.
Notably these chips uses ARM PL011 for UART.ARM_AMBAis selected for its driver.
Quoted 3 lines
Quoted 1 line
Signed-off-by Chuanhong Guo <[email protected]>This needs to be in a series with the user (your dts)
Could the user be a driver Kconfig instead? When submitting a GPIO driver I was suggested to not depend on architecture symbol and add soc-specific ones to arch/ first. [0]
I still need to polish the clock/reset driver a bit before submitting them. Without a clock driver I can't really submit a dts with meaningful content.
Signature · 2 lines
Regards, Chuanhong Guo
Quoted 16 lines · Chuanhong Guo
Hello!
Quoted 9 lines · Conor Dooley
Quoted 7 lines · Chuanhong Guo
Siflower RISC-V SoCs, including SF21A6826, SF21H8898 and some other upcomping chips, are RISC-V chips with T-Head C908 cores for home routers and gateways. Add a
Kconfigentry namedARCH_SIFLOWERfor them.
Notably these chips uses ARM PL011 for UART.ARM_AMBAis selected for its driver.Quoted 3 lines
Quoted 1 line
Signed-off-by Chuanhong Guo <[email protected]>This needs to be in a series with the user (your dts)
Quoted 8 lines
Could the user be a driver
Kconfiginstead? When submitting a GPIO driver I was suggested to not depend on architecture symbol and add soc-specific ones toarch/first. [0]I still need to polish the clock/reset driver a bit before submitting them. Without a clock driver I can't really submit a dts with meaningful content.
Send it with the GPIO driver then please.