Skip to contentSkip to conversation

conf: machine: k3: Use Cortex-A53/A72 CPU tune

PATCH New Denys Dmytriyenko 1 participant 1 message Jan 21, 2025

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 conf: machine: k3: Use Cortex-A53/A72 CPU tune

From: Andrew Davis <[email protected]>

All current K3 devices use either A53 or A72. Use the compile tune configuration specific for these to allow the compiler to make better optimizations.

Default tune here is weakly set to a lowest common denominator of aarch64, as before, which is a recommended behavior for a BSP layer.

This allows for greater binary reuse (packages, sstate, etc.) across different platforms of the same architecture in multi-BSP environments.

At the same time, since all the correct tunes are now configured for K3 devices, one can elevate compiler optimization levels either from local.conf or own Distro configuration on a per-SoC or per-device basis, like so:

DEFAULTTUNE:k3 = "armv8a-crc"
DEFAULTTUNE:j721e = "cortexa72-cortexa53"
DEFAULTTUNE:beagleplay = "cortexa72-cortexa53"

---
There were several discussions on this topic, e.g. a v1 of this patch and also a similar separate patch:
https://patchwork.yoctoproject.org/project/ti/patch/[email protected]/
https://patchwork.yoctoproject.org/project/ti/patch/[email protected]/

v2 sets back the lowest DEFAULTTUNE, explains why, and details how to benefit from extra optimizations and where to set those.

 meta-ti-bsp/conf/machine/include/k3.inc | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
meta-ti-bsp/conf/machine/include/k3.inc +2 -1
index a296f64f..dd3cbeca 100644
@@ -3,7 +3,8 @@
 require conf/machine/include/ti-soc.inc
 SOC_FAMILY:append = ":k3"
 
-require conf/machine/include/arm/arch-arm64.inc
+DEFAULTTUNE ?= "aarch64"
+require conf/machine/include/arm/armv8a/tune-cortexa72-cortexa53.inc
 
 require conf/machine/include/ti-bsp.inc
 
Signature · 1 line
2.25.1