ref-manual: Describe grub-efi-cfg overrides and GRUB_TITLE
PATCH v3 1/1 ref-manual: Describe grub-efi-cfg overrides and GRUB_TITLE
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for GRUB_TITLE.
--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)
documentation/ref-manual/classes.rst +16 -0
@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).
@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. + - :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).
@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUB boot +entry, and some variables can be defined individually per ``LABEL``. The label +specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install" with the +additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" + .. _ref-classes-gsettings: ``gsettings``
documentation/ref-manual/variables.rst +5 -0
@@ -3320,6 +3320,11 @@ system and gives an overview of their function and contents. :ref:`ref-classes-grub-efi` class for more information on how this variable is used. + :term:`GRUB_TITLE` + Specifies custom titles for GRUB labels defined in :term:`LABELS`. See + the :ref:`ref-classes-grub-efi` class for more information on how this + variable is used. + :term:`GTKIMMODULES_PACKAGES` When inheriting the :ref:`ref-classes-gtk-immodules-cache` class, this variable specifies the packages that contain the GTK+ input
Signature · 1 line
2.43.0
Hi Simon,
Quoted 33 lines · Simon A. Eugster
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)documentation/ref-manual/classes.rst +4
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. + - :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).
documentation/ref-manual/classes.rst This class supports several variables: · line 1018
Quoted 4 lines
documentation/ref-manual/classes.rst +1
-0@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUB boot
:term:``LABELS`` is incorrect, it should be enclosed with single backticks only.
Regards,
Antonin
Quoted 20 lines
documentation/ref-manual/classes.rst +11
-0+entry, and some variables can be defined individually per ``LABEL``. The label +specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install" with the +additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" + .. _ref-classes-gsettings: ``gsettings``documentation/ref-manual/variables.rst +0
-0@@ -3320,6 +3320,11 @@ system and gives an overview of their function and contents. :ref:`ref-classes-grub-efi` class for more information
documentation/ref-manual/variables.rst system and gives an overview of their function and contents. · line 3330
Quoted 10 lines
documentation/ref-manual/variables.rst +5
-0on how this variable is used. + :term:`GRUB_TITLE` + Specifies custom titles for GRUB labels defined in :term:`LABELS`. See + the :ref:`ref-classes-grub-efi` class for more information on how this + variable is used. + :term:`GTKIMMODULES_PACKAGES` When inheriting the :ref:`ref-classes-gtk-immodules-cache` class, this variable specifies the packages that contain the GTK+ input
--
Antonin Godard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Hi Simon,
Quoted 23 lines · Simon A. Eugster via lists.yoctoproject.org
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)documentation/ref-manual/classes.rst +1
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).
documentation/ref-manual/classes.rst This class supports several variables: · line 1010
Quoted 6 lines
documentation/ref-manual/classes.rst +3
-0@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. +
I would rather say that it defaults to label's name (``LABEL``) or something like this. GRUB_TITLE does not defaults to LABEL, which is what this may imply.
Quoted 9 lines
documentation/ref-manual/classes.rst +2
-0- :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUB boot +entry, and some variables can be defined individually per ``LABEL``. The label
documentation/ref-manual/classes.rst This class supports several variables: · line 1029
Quoted 10 lines
documentation/ref-manual/classes.rst +10
-0+specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install" with the +additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" +
FYI, I believe this is currently not properly handled by sstate-cache. We use the same OVERRIDES trick on extlinux.conf generation for U-Boot and we needed (it seems like, wasn't there when it was implemented) explicitly list all variables with their OVERRIDES.
c.f. do_create_extlinux_config[vardeps] in meta/classes-recipe/uboot-extlinux-config.bbclass.
An easy way to check that would be to only modify APPEND:grub_factory and see if it regenerates the grub config file appropriately.
Cheers,
Quentin
Hi Antonin,
Quoted 40 lines · Antonin Godard
Hi Simon,
Review
Quoted 11 lines · Simon A. Eugster
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)(quoted diff) +0
-0
b/documentation/ref-manual/classes.rstQuoted 25 lines
index
761be7b545..1d64ac2f28100644documentation/ref-manual/classes.rst +4
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. + - :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional).
Quoted 6 lines
documentation/ref-manual/classes.rst This class supports several variables: · line 1018
Quoted 1 line
documentation/ref-manual/classes.rst +1
-0+Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUBboot
:term:``LABELS`` is incorrect, it should be enclosed with single backticks only.
Thanks, will fix that!
Simon
Hi Quentin,
Quoted 66 lines · Quentin Schulz
Hi Simon,
Review
Quoted 11 lines · Simon A. Eugster via lists.yoctoproject.org
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)(quoted diff) +0
-0
b/documentation/ref-manual/classes.rstQuoted 12 lines
index
761be7b545..1d64ac2f28100644documentation/ref-manual/classes.rst +1
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).documentation/ref-manual/classes.rst This class supports several variables: · line 1010
Quoted 6 lines
documentation/ref-manual/classes.rst +3
-0@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. +I would rather say that it defaults to label's name (``LABEL``) or something like this.
GRUB_TITLEdoes not defaults to LABEL, which is what this may imply.documentation/ref-manual/classes.rst This class supports several variables: · line 1018
Quoted 8 lines
documentation/ref-manual/classes.rst +1
-0- :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUBboot
documentation/ref-manual/classes.rst This class supports several variables: · line 1019
Quoted 1 line
documentation/ref-manual/classes.rst +1
-0+entry, and some variables can be defined individually per ``LABEL``.The label
documentation/ref-manual/classes.rst This class supports several variables:
Quoted 4 lines
documentation/ref-manual/classes.rst +4
-0+specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install"with the
documentation/ref-manual/classes.rst This class supports several variables: · line 1029
Quoted 6 lines
documentation/ref-manual/classes.rst +6
-0+additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" +FYI, I believe this is currently not properly handled by sstate-cache. We use the same OVERRIDES trick on extlinux.conf generation for U-Boot and we needed (it seems like, wasn't there when it was implemented) explicitly list all variables with their OVERRIDES.
Quoted 6 lines
c.f. do_create_extlinux_config[vardeps] in meta/classes-recipe/uboot-extlinux-config.bbclass.
An easy way to check that would be to only modify APPEND:grub_factory and see if it regenerates the grub config file appropriately.
I checked briefly and first built the image, then I modified one single variable by adding “modified”, and ran the build again. After both runs, I did a bitbake -e, and the „modified” was not present after the first build, but after the second build.
GRUB_TITLE:grub_install:append = "Another NEW title for the grub_install label, modified"
Did I check correctly?
Thanks,
Simon
Hi Simon,
Quoted 83 lines · Simon A. Eugster via lists.yoctoproject.org
Hi Quentin,
Quoted 66 lines · Quentin Schulz
Hi Simon,
Review
Quoted 11 lines · Simon A. Eugster via lists.yoctoproject.org
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)(quoted diff) +0
-0
b/documentation/ref-manual/classes.rstQuoted 12 lines
index
761be7b545..1d64ac2f28100644documentation/ref-manual/classes.rst +1
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).documentation/ref-manual/classes.rst This class supports several variables: · line 1010
Quoted 6 lines
documentation/ref-manual/classes.rst +3
-0@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. +I would rather say that it defaults to label's name (``LABEL``) or something like this.
GRUB_TITLEdoes not defaults to LABEL, which is what this may imply.documentation/ref-manual/classes.rst This class supports several variables: · line 1018
Quoted 8 lines
documentation/ref-manual/classes.rst +1
-0- :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUBboot
documentation/ref-manual/classes.rst This class supports several variables: · line 1019
Quoted 1 line
documentation/ref-manual/classes.rst +1
-0+entry, and some variables can be defined individually per ``LABEL``.The label
documentation/ref-manual/classes.rst This class supports several variables:
Quoted 4 lines
documentation/ref-manual/classes.rst +4
-0+specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install"with the
documentation/ref-manual/classes.rst This class supports several variables: · line 1029
Quoted 6 lines
documentation/ref-manual/classes.rst +6
-0+additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" +FYI, I believe this is currently not properly handled by sstate-cache. We use the same OVERRIDES trick on extlinux.conf generation for U-Boot and we needed (it seems like, wasn't there when it was implemented) explicitly list all variables with their OVERRIDES.
Quoted 6 lines
c.f. do_create_extlinux_config[vardeps] in meta/classes-recipe/uboot-extlinux-config.bbclass.
An easy way to check that would be to only modify APPEND:grub_factory and see if it regenerates the grub config file appropriately.
I checked briefly and first built the image, then I modified one single variable by adding “modified”, and ran the build again. After both runs, I did a bitbake -e, and the „modified” was not present after the first build, but after the second build.
Quoted 5 lines
GRUB_TITLE:grub_install:append = "Another NEW title for the
grub_installlabel, modified"Did I check correctly?
No :) bitbake -e is the result of parsing. Parsing isn't an issue here, but rather what is going to invalidate the sstate-cache for a task or not. Tasks are only rebuilt if their content changed (taskhask), the variables they depend on change (this is done by checking the content of variables stored in the task's vardeps varflag and also I believe by some heuristic detecting ${VAR}, $VAR, d.getVar('VAR') and the likes), or if a task they depend on has their output changed (see Hash Equivalence in the docs).
You need to generate the grub config file once, change a value, generate it a second time and then inspect the file before and after that change. GRUB_TITLE for the install LABEL should be modified if everything works correctly.
Cheers,
Quentin
Hi Quentin,
Ok, I see! That makes sense. So find found the grub.cfg file in the build directory at work/intel_corei7_64-poky-linux/IMAGENAME/1.0/IMAGENAME-1.0/grub_live.cfg and now it is on modified. So I ran the build again after changing the variable, and it was updated.
Was this a valid test now? :)
Simon
Quoted 112 lines · Quentin Schulz
Hi Simon,
Quoted 75 lines · Simon A. Eugster via lists.yoctoproject.org
Hi Quentin,
On Thu, Jan 30, 2025 at 4:57 PM Quentin Schulz <[email protected]
Quoted 69 lines · wrote:
Hi Simon,
Review
Quoted 11 lines · Simon A. Eugster via lists.yoctoproject.org
This patch describes how to use overrides for grub-efi-cfg because that is otherwise only clear after reading the .bbclass file. It also adds a description for
GRUB_TITLE.Signed-off-by Simon A. Eugster <[email protected]>--- documentation/ref-manual/classes.rst | 16 ++++++++++++++++ documentation/ref-manual/variables.rst | 5 +++++ 2 files changed, 21 insertions(+)(quoted diff) +0
-0
b/documentation/ref-manual/classes.rstQuoted 12 lines
index
761be7b545..1d64ac2f28100644documentation/ref-manual/classes.rst +1
-0@@ -991,6 +991,7 @@ This class supports several variables: - :term:`INITRD`: Indicates list of filesystem images to concatenate and use as an initial RAM disk (initrd) (optional). + Can be specified for each ``LABEL``. - :term:`ROOTFS`: Indicates a filesystem image to include as the root filesystem (optional).documentation/ref-manual/classes.rst This class supports several variables: · line 1010
Quoted 6 lines
documentation/ref-manual/classes.rst +3
-0@@ -1004,6 +1005,9 @@ This class supports several variables: - :term:`APPEND`: An override list of append strings for each ``LABEL``. +- :term:`GRUB_TITLE`: A custom title for each ```LABEL``. + Defaults to ``LABEL`` if it is not defined. +I would rather say that it defaults to label's name (``LABEL``) or something like this.
GRUB_TITLEdoes not defaults to LABEL, which is what this may imply.documentation/ref-manual/classes.rst This class supports several variables: · line 1018
Quoted 8 lines
documentation/ref-manual/classes.rst +1
-0- :term:`GRUB_OPTS`: Additional options to add to the configuration (optional). Options are delimited using semi-colon characters (``;``).@@ -1011,6 +1015,18 @@ This class supports several variables: - :term:`GRUB_TIMEOUT`: Timeout before executing the default ``LABEL`` (optional). +Each ``LABEL`` defined in the :term:``LABELS`` variable creates a GRUBboot
documentation/ref-manual/classes.rst This class supports several variables: · line 1019
Quoted 1 line
documentation/ref-manual/classes.rst +1
-0+entry, and some variables can be defined individually per ``LABEL``.The label
documentation/ref-manual/classes.rst This class supports several variables:
Quoted 4 lines
documentation/ref-manual/classes.rst +4
-0+specific override names are defined as ``grub_LABEL``. + +For example, for a label ``factory``, the override name would be +``grub_factory``. A custom GRUB menu entry titled "Factory Install"with the
documentation/ref-manual/classes.rst This class supports several variables: · line 1029
Quoted 6 lines
documentation/ref-manual/classes.rst +6
-0+additional parameter ``factory=yes`` can be achieved as follows:: + + LABELS:append = " factory" + APPEND:grub_factory = "factory=yes" + GRUB_TITLE:grub_factory = "Factory Install" +FYI, I believe this is currently not properly handled by sstate-cache. We use the same OVERRIDES trick on extlinux.conf generation for U-Boot and we needed (it seems like, wasn't there when it was implemented) explicitly list all variables with their OVERRIDES.
c.f. do_create_extlinux_config[vardeps] in meta/classes-recipe/uboot-extlinux-config.bbclass.
Quoted 6 lines
Quoted 3 lines
An easy way to check that would be to only modify APPEND:grub_factory and see if it regenerates the grub config file appropriately.
I checked briefly and first built the image, then I modified one single variable by adding “modified”, and ran the build again. After both runs,
I
Quoted 1 line
did a bitbake -e, and the „modified” was not present after the first
build,
Quoted 7 lines
but after the second build.
GRUB_TITLE:grub_install:append = "Another NEW title for the
grub_installlabel, modified"Did I check correctly?
No :) bitbake -e is the result of parsing. Parsing isn't an issue here, but rather what is going to invalidate the sstate-cache for a task or not. Tasks are only rebuilt if their content changed (taskhask), the variables they depend on change (this is done by checking the content of variables stored in the task's vardeps varflag and also I believe by some heuristic detecting ${VAR}, $VAR,
d.getVar('VAR')and the likes), or if a task they depend on has their output changed (see Hash Equivalence in the docs).You need to generate the grub config file once, change a value, generate it a second time and then inspect the file before and after that change.
GRUB_TITLEfor the install LABEL should be modified if everything works correctly.Cheers,
Quentin
Hi Simon,
Quoted 10 lines · Simon Eugster
Hi Quentin,
Ok, I see! That makes sense. So find found the grub.cfg file in the build directory at work/intel_corei7_64-poky-linux/IMAGENAME/1.0/IMAGENAME-1.0/grub_live.cfg and now it is on modified. So I ran the build again after changing the variable, and it was updated.
Was this a valid test now? :)
It should indeed, and I now have more questions than I started with :)
Will try to find time to figure out what's going on on my own.
Thanks for testing!
Quentin
Hi Quentin,
Quoted 11 lines · Quentin Schulz
Hi Simon,
Quoted 8 lines · Simon Eugster
Hi Quentin,
Ok, I see! That makes sense. So find found the grub.cfg file in the build directory at work/intel_corei7_64-poky-linux/IMAGENAME/1.0/IMAGENAME-1.0/grub_live.cfg and now it is on modified. So I ran the build again after changing the variable, and it was updated.
Quoted 7 lines
Quoted 2 lines
Was this a valid test now? :)
It should indeed, and I now have more questions than I started with :)
Will try to find time to figure out what's going on on my own.
Let me know if I can test something else on my side too. Also, I have added GRUB_TITLE to grub-bootconf.bb if that is relevant for your case:
do_configure[vardeps] += "APPEND ROOT GRUB_TITLE"
(Thinking about it, INITRD should probably also be in this list, right?
Have a good week-end!
Simon
Hi Simon,
Quoted 19 lines · Simon Eugster
Hi Quentin,
Quoted 14 lines · Quentin Schulz
Hi Simon,
Quoted 10 lines · Simon Eugster
Hi Quentin,
Ok, I see! That makes sense. So find found the grub.cfg file in the build directory at work/intel_corei7_64-poky-linux/IMAGENAME/1.0/IMAGENAME-1.0/grub_live.cfg and now it is on modified. So I ran the build again after changing the variable, and it was updated.
Was this a valid test now? :)
Quoted 6 lines
Quoted 4 lines
It should indeed, and I now have more questions than I started with :)
Will try to find time to figure out what's going on on my own.
Let me know if I can test something else on my side too.
If I could have instructions on how to prepare such an image, then it would save me the time to look on how to do this (I never build for x86 and I've never done anything with grub/EFI).
Vanilla poky I guess, with which image, MACHINE and DISTRO? Anything to add to the image or local.conf?
That way I can start a build while working on something else :)
Quoted 7 lines
Also, I have added
GRUB_TITLEto grub-bootconf.bb if that is relevant for your case:do_configure[vardeps] += "APPEND ROOT
GRUB_TITLE"(Thinking about it, INITRD should probably also be in this list, right?
Wondering if we shouldn't have a variable that stores all variables to add in a recipe's task[vardeps] when they are running build_efi_cfg.
Cheers,
Quentin