include: env: phytec: Add optargs to K3 files
PATCH 1/1 include: env: phytec: Add optargs to K3 files
From: Nathan Morrisson <[email protected]>
Add the optargs variable so that we can set optional arguments while booting.
Signed-off-by Nathan Morrisson <[email protected]>
Signed-off-by Daniel Schultz <[email protected]>
--- include/env/phytec/k3_mmc.env | 1 + include/env/phytec/k3_net.env | 2 +- include/env/phytec/k3_spi.env | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-)
include/env/phytec/k3_mmc.env +1 -0
@@ -11,6 +11,7 @@ mmcargs=setenv bootargs console=${console} earlycon=${earlycon} root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw + ${optargs} mmcloadimage=load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} Image mmcloadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile} mmcboot=if test ${doraucboot} = 1; then run raucinit; fi;
include/env/phytec/k3_net.env +1 -1
@@ -9,7 +9,7 @@ #include <env/phytec/overlays.env> netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp rw - nfsroot=${serverip}:${nfsroot},vers=4,tcp + nfsroot=${serverip}:${nfsroot},vers=4,tcp ${optargs} netloadimage=${net_fetch_cmd} ${kernel_addr_r} ${serverip}:/Image netloadfdt=${net_fetch_cmd} ${fdt_addr_r} ${serverip}:/${fdtfile} netboot=run netargs;
include/env/phytec/k3_spi.env +1 -1
@@ -6,7 +6,7 @@ /* Logic for TI K3 based SoCs to boot from an OSPI/QSPI NOR flash. */ -spiargs=setenv bootargs console=${console} earlycon=${earlycon} +spiargs=setenv bootargs console=${console} earlycon=${earlycon} ${optargs} spiloadimage=sf read ${kernel_addr_r} ${spi_image_addr} ${size_kern} spiloadfdt=sf read ${fdt_addr_r} ${spi_fdt_addr} ${size_fdt} spiloadramdisk=sf read ${ramdisk_addr_r} ${spi_ramdisk_addr} ${size_fs}
Signature · 1 line
2.25.1
Quoted 4 lines · Daniel Schultz
Add the optargs variable so that we can set optional arguments while booting.
Applied to u-boot/master, thanks!
Signature · 1 line
Tom