Skip to contentSkip to conversation

platform/x86: alienware-wmi driver rework

PATCH Superseded Kurt Borja 3 participants 23 messages Feb 3, 2025

Subsystems (2)

v7 of 10 Superseded Latest is v10 →

lore
Share & tools
lore

Kurt Borja

author maintainer
#0 lore raw

v7 cover platform/x86: alienware-wmi driver rework

Hi!

I bring some last minute modifications.

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Aside from that, I added .pprof to awcc_quirks because I'm going to add support for new features after this series, and it makes sense that force_platform_profile only forces the pprof and not other upcoming features.

~ Kurt
---
[02/14]
- In alienware_alienfx_setup() add a devm action to remove the created platform device
- Drop device_remove_groups() in WMAX .remove callback
- Add PROBE_FORCE_SYNCHRONOUS to the platform driver
- Drop .remove callbacks on both WMI drivers

[03/14]
- Add awcc_platform_profile_init() to create the platform_profile

    device on quirks->thermal == true condition

[07/14]
- Add .pprof to awcc_quirks

[10/14]
- Drop unused member quirks on alienfx_priv (remnant of another version)

v6: https://lore.kernel.org/platform-driver-x86/[email protected]/

Kurt Borja (14):
platform/x86: alienware-wmi: Add a state container for LED control
feature
platform/x86: alienware-wmi: Add WMI Drivers
platform/x86: alienware-wmi: Add a state container for thermal control
methods
platform/x86: alienware-wmi: Refactor LED control methods platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods platform/x86: alienware-wmi: Refactor thermal control methods platform/x86: alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform/x86: Split the alienware-wmi driver
platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries platform/x86: alienware-wmi: Update header and module information

 MAINTAINERS                                   |    4 +-
 drivers/platform/x86/dell/Kconfig             |   30 +-
 drivers/platform/x86/dell/Makefile            |   45 +-
 .../platform/x86/dell/alienware-wmi-base.c    |  496 +++++++
 .../platform/x86/dell/alienware-wmi-legacy.c  |   95 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    |  790 +++++++++++
 drivers/platform/x86/dell/alienware-wmi.c     | 1249 -----------------
 drivers/platform/x86/dell/alienware-wmi.h     |  101 ++
 8 files changed, 1534 insertions(+), 1276 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
 delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

base-commit: 05dbaf8dd8bf537d4b4eb3115ab42a5fb40ff1f5

Signature · 1 line
2.48.1
author maintainer
#1 lore raw

PATCH v7 1/14 platform/x86: alienware-wmi: Add a state container for LED control feature

Add a state container for the "alienware-wmi" platform device and initialize it on the new alienfx_probe(). Migrate all LED control functions to use this state container to support upcoming file split.

Additionally move the led_classdev registration to the platform driver probe and make it device managed.

Drop alienware_zone_init() and alienware_zone_exit() because they are no longer needed and mimic the quirks->num_zone > 0 check by failing the platform device probe.

---
 drivers/platform/x86/dell/alienware-wmi.c | 125 ++++++++++++----------
 1 file changed, 68 insertions(+), 57 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +68 -57
index e252e0cf47ef..ab86deb1adb9 100644
@@ -413,13 +413,18 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct alienfx_priv {
+	struct platform_device *pdev;
+	struct led_classdev global_led;
+	struct color_platform colors[4];
+	u8 global_brightness;
+	u8 lighting_control_state;
+};
+
 static struct platform_device *platform_device;
-static struct color_platform colors[4];
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
 static u8 interface;
-static u8 lighting_control_state;
-static u8 global_brightness;
 
 /*
  * Helpers used for zone control
@@ -451,7 +456,7 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(u8 location)
+static int alienware_update_led(struct alienfx_priv *priv, u8 location)
 {
 	int method_id;
 	acpi_status status;
@@ -461,21 +466,21 @@ static int alienware_update_led(u8 location)
 	struct wmax_led_args wmax_basic_args;
 	if (interface == WMAX) {
 		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = colors[location];
-		wmax_basic_args.state = lighting_control_state;
+		wmax_basic_args.colors = priv->colors[location];
+		wmax_basic_args.state = priv->lighting_control_state;
 		guid = WMAX_CONTROL_GUID;
 		method_id = WMAX_METHOD_ZONE_CONTROL;
 
 		input.length = sizeof(wmax_basic_args);
 		input.pointer = &wmax_basic_args;
 	} else {
-		legacy_args.colors = colors[location];
-		legacy_args.brightness = global_brightness;
+		legacy_args.colors = priv->colors[location];
+		legacy_args.brightness = priv->global_brightness;
 		legacy_args.state = 0;
-		if (lighting_control_state == LEGACY_BOOTING ||
-		    lighting_control_state == LEGACY_SUSPEND) {
+		if (priv->lighting_control_state == LEGACY_BOOTING ||
+		    priv->lighting_control_state == LEGACY_SUSPEND) {
 			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = lighting_control_state;
+			legacy_args.state = priv->lighting_control_state;
 		} else
 			guid = LEGACY_CONTROL_GUID;
 		method_id = location + 1;
@@ -494,22 +499,26 @@ static int alienware_update_led(u8 location)
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+	struct color_platform *colors = &priv->colors[location];
+
 	return sprintf(buf, "red: %d, green: %d, blue: %d\n",
-		       colors[location].red, colors[location].green,
-		       colors[location].blue);
+		       colors->red, colors->green, colors->blue);
 
 }
 
 static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count, u8 location)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+	struct color_platform *colors = &priv->colors[location];
 	int ret;
 
-	ret = parse_rgb(buf, &colors[location]);
+	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(location);
+	ret = alienware_update_led(priv, location);
 
 	return ret ? ret : count;
 }
@@ -577,9 +586,11 @@ static ssize_t lighting_control_state_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	if (lighting_control_state == LEGACY_BOOTING)
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
+
+	if (priv->lighting_control_state == LEGACY_BOOTING)
 		return sysfs_emit(buf, "[booting] running suspend\n");
-	else if (lighting_control_state == LEGACY_SUSPEND)
+	else if (priv->lighting_control_state == LEGACY_SUSPEND)
 		return sysfs_emit(buf, "booting running [suspend]\n");
 
 	return sysfs_emit(buf, "booting [running] suspend\n");
@@ -589,6 +600,7 @@ static ssize_t lighting_control_state_store(struct device *dev,
 					    struct device_attribute *attr,
 					    const char *buf, size_t count)
 {
+	struct alienfx_priv *priv = dev_get_drvdata(dev);
 	u8 val;
 
 	if (strcmp(buf, "booting\n") == 0)
@@ -600,9 +612,9 @@ static ssize_t lighting_control_state_store(struct device *dev,
 	else
 		val = WMAX_RUNNING;
 
-	lighting_control_state = val;
+	priv->lighting_control_state = val;
 	pr_debug("alienware-wmi: updated control state to %d\n",
-		 lighting_control_state);
+		 priv->lighting_control_state);
 
 	return count;
 }
@@ -662,46 +674,26 @@ static int wmax_brightness(int brightness)
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
+	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
+						 global_led);
 	int ret;
-	global_brightness = brightness;
+
+	priv->global_brightness = brightness;
+
 	if (interface == WMAX)
 		ret = wmax_brightness(brightness);
 	else
-		ret = alienware_update_led(0);
+		ret = alienware_update_led(priv, 0);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
 
 static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 {
-	return global_brightness;
-}
-
-static struct led_classdev global_led = {
-	.brightness_set = global_led_set,
-	.brightness_get = global_led_get,
-	.name = "alienware::global_brightness",
-};
+	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
+						 global_led);
 
-static int alienware_zone_init(struct platform_device *dev)
-{
-	if (interface == WMAX) {
-		lighting_control_state = WMAX_RUNNING;
-	} else if (interface == LEGACY) {
-		lighting_control_state = LEGACY_RUNNING;
-	}
-	global_led.max_brightness = 0x0F;
-	global_brightness = global_led.max_brightness;
-
-	return led_classdev_register(&dev->dev, &global_led);
-}
-
-static void alienware_zone_exit(struct platform_device *dev)
-{
-	if (!quirks->num_zones)
-		return;
-
-	led_classdev_unregister(&global_led);
+	return priv->global_brightness;
 }
 
 static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
@@ -1157,6 +1149,33 @@ static int create_thermal_profile(struct platform_device *platform_device)
 /*
  * Platform Driver
  */
+static int alienfx_probe(struct platform_device *pdev)
+{
+	struct alienfx_priv *priv;
+
+	if (!quirks->num_zones)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (interface == WMAX)
+		priv->lighting_control_state = WMAX_RUNNING;
+	else
+		priv->lighting_control_state = LEGACY_RUNNING;
+
+	priv->pdev = pdev;
+	priv->global_led.name = "alienware::global_brightness";
+	priv->global_led.brightness_set = global_led_set;
+	priv->global_led.brightness_get = global_led_get;
+	priv->global_led.max_brightness = 0x0F;
+	priv->global_brightness = priv->global_led.max_brightness;
+	platform_set_drvdata(pdev, priv);
+
+	return devm_led_classdev_register(&pdev->dev, &priv->global_led);
+}
+
 static const struct attribute_group *alienfx_groups[] = {
 	&zone_attribute_group,
 	&hdmi_attribute_group,
@@ -1170,6 +1189,7 @@ static struct platform_driver platform_driver = {
 		.name = "alienware-wmi",
 		.dev_groups = alienfx_groups,
 	},
+	.probe = alienfx_probe,
 };
 
 static int __init alienware_wmi_init(void)
@@ -1217,16 +1237,8 @@ static int __init alienware_wmi_init(void)
 			goto fail_prep_thermal_profile;
 	}
 
-	if (quirks->num_zones > 0) {
-		ret = alienware_zone_init(platform_device);
-		if (ret)
-			goto fail_prep_zones;
-	}
-
 	return 0;
 
-fail_prep_zones:
-	alienware_zone_exit(platform_device);
 fail_prep_thermal_profile:
 	platform_device_del(platform_device);
 fail_platform_device2:
@@ -1241,7 +1253,6 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	alienware_zone_exit(platform_device);
 	platform_device_unregister(platform_device);
 	platform_driver_unregister(&platform_driver);
 }
Signature · 1 line
2.48.1
author maintainer
#2 lore raw

PATCH v7 2/14 platform/x86: alienware-wmi: Add WMI Drivers

In reply to Kurt Borja

Add WMI drivers for LEGACY and WMAX devices.

This involves moving the platform device registration to a helper function that is now called from the driver's preferred WMI device driver probe. In the case of the WMAX this is done only if !quirks->thermal because the newer WMAX interface doesn't support any of the LED features of this driver. This also eliminates the need to check for quirks->num_zones > 0 inside alienfx_probe().

The platform_driver's probe type is also set to PROBE_FORCE_SYNCHRONOUS so we can create WMAX-only sysfs groups from within the probe without races.

Only one WMI driver is registered on module initialization to prevent registering a duplicate platform device.

Additionally, create_thermal_profile() now takes wmi_device * instead of platform_device *.

---
 drivers/platform/x86/dell/alienware-wmi.c | 182 +++++++++++++++++-----
 1 file changed, 143 insertions(+), 39 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +143 -39
index ab86deb1adb9..5ce954137f9d 100644
@@ -15,6 +15,7 @@
 #include <linux/platform_profile.h>
 #include <linux/dmi.h>
 #include <linux/leds.h>
+#include <linux/wmi.h>
 
 #define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
 #define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
@@ -39,8 +40,6 @@
 MODULE_AUTHOR("Mario Limonciello <[email protected]>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
-MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
 
 static bool force_platform_profile;
 module_param_unsafe(force_platform_profile, bool, 0);
@@ -421,7 +420,10 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
-static struct platform_device *platform_device;
+struct alienfx_platdata {
+	struct wmi_device *wdev;
+};
+
 static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 
 static u8 interface;
@@ -1136,11 +1138,11 @@ static const struct platform_profile_ops awcc_platform_profile_ops = {
 	.profile_set = thermal_profile_set,
 };
 
-static int create_thermal_profile(struct platform_device *platform_device)
+static int create_thermal_profile(struct wmi_device *wdev)
 {
 	struct device *ppdev;
 
-	ppdev = devm_platform_profile_register(&platform_device->dev, "alienware-wmi",
+	ppdev = devm_platform_profile_register(&wdev->dev, "alienware-wmi",
 					       NULL, &awcc_platform_profile_ops);
 
 	return PTR_ERR_OR_ZERO(ppdev);
@@ -1153,9 +1155,6 @@ static int alienfx_probe(struct platform_device *pdev)
 {
 	struct alienfx_priv *priv;
 
-	if (!quirks->num_zones)
-		return -ENODEV;
-
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -1178,6 +1177,10 @@ static int alienfx_probe(struct platform_device *pdev)
 
 static const struct attribute_group *alienfx_groups[] = {
 	&zone_attribute_group,
+	NULL
+};
+
+static const struct attribute_group *wmax_alienfx_groups[] = {
 	&hdmi_attribute_group,
 	&amplifier_attribute_group,
 	&deepsleep_attribute_group,
@@ -1188,23 +1191,132 @@ static struct platform_driver platform_driver = {
 	.driver = {
 		.name = "alienware-wmi",
 		.dev_groups = alienfx_groups,
+		.probe_type = PROBE_FORCE_SYNCHRONOUS,
 	},
 	.probe = alienfx_probe,
 };
 
-static int __init alienware_wmi_init(void)
+static void alienware_alienfx_remove(void *data)
+{
+	struct platform_device *pdev = data;
+
+	platform_device_unregister(pdev);
+}
+
+static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
+	struct device *dev = &pdata->wdev->dev;
+	struct platform_device *pdev;
 	int ret;
 
-	if (wmi_has_guid(LEGACY_CONTROL_GUID))
-		interface = LEGACY;
-	else if (wmi_has_guid(WMAX_CONTROL_GUID))
-		interface = WMAX;
-	else {
-		pr_warn("alienware-wmi: No known WMI GUID found\n");
-		return -ENODEV;
+	pdev = platform_device_register_data(NULL, "alienware-wmi",
+					     PLATFORM_DEVID_NONE, pdata,
+					     sizeof(*pdata));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	dev_set_drvdata(dev, pdev);
+	ret = devm_add_action_or_reset(dev, alienware_alienfx_remove, pdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Legacy WMI driver
+ */
+static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+
+	return alienware_alienfx_setup(&pdata);
+}
+
+static const struct wmi_device_id alienware_legacy_device_id_table[] = {
+	{ LEGACY_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_legacy_device_id_table);
+
+static struct wmi_driver alienware_legacy_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-alienfx",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_legacy_device_id_table,
+	.probe = legacy_wmi_probe,
+	.no_singleton = true,
+};
+
+static int __init alienware_legacy_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_legacy_wmi_driver);
+}
+
+static void __exit alienware_legacy_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_legacy_wmi_driver);
+}
+
+/*
+ * WMAX WMI driver
+ */
+static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct alienfx_platdata pdata = {
+		.wdev = wdev,
+	};
+	struct platform_device *pdev;
+	int ret;
+
+	if (quirks->thermal) {
+		ret = create_thermal_profile(wdev);
+	} else {
+		ret = alienware_alienfx_setup(&pdata);
+		if (ret < 0)
+			return ret;
+
+		pdev = dev_get_drvdata(&wdev->dev);
+
+		ret = device_add_groups(&pdev->dev, wmax_alienfx_groups);
 	}
 
+	return ret;
+}
+
+static const struct wmi_device_id alienware_wmax_device_id_table[] = {
+	{ WMAX_CONTROL_GUID, NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table);
+
+static struct wmi_driver alienware_wmax_wmi_driver = {
+	.driver = {
+		.name = "alienware-wmi-wmax",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = alienware_wmax_device_id_table,
+	.probe = wmax_wmi_probe,
+	.no_singleton = true,
+};
+
+static int __init alienware_wmax_wmi_init(void)
+{
+	return wmi_driver_register(&alienware_wmax_wmi_driver);
+}
+
+static void __exit alienware_wmax_wmi_exit(void)
+{
+	wmi_driver_unregister(&alienware_wmax_wmi_driver);
+}
+
+static int __init alienware_wmi_init(void)
+{
+	int ret;
+
 	dmi_check_system(alienware_quirks);
 	if (quirks == NULL)
 		quirks = &quirk_unknown;
@@ -1220,32 +1332,20 @@ static int __init alienware_wmi_init(void)
 	}
 
 	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		goto fail_platform_driver;
-	platform_device = platform_device_alloc("alienware-wmi", PLATFORM_DEVID_NONE);
-	if (!platform_device) {
-		ret = -ENOMEM;
-		goto fail_platform_device1;
-	}
-	ret = platform_device_add(platform_device);
-	if (ret)
-		goto fail_platform_device2;
+	if (ret < 0)
+		return ret;
 
-	if (quirks->thermal) {
-		ret = create_thermal_profile(platform_device);
-		if (ret)
-			goto fail_prep_thermal_profile;
+	if (wmi_has_guid(WMAX_CONTROL_GUID)) {
+		interface = WMAX;
+		ret = alienware_wmax_wmi_init();
+	} else {
+		interface = LEGACY;
+		ret = alienware_legacy_wmi_init();
 	}
 
-	return 0;
+	if (ret < 0)
+		platform_driver_unregister(&platform_driver);
 
-fail_prep_thermal_profile:
-	platform_device_del(platform_device);
-fail_platform_device2:
-	platform_device_put(platform_device);
-fail_platform_device1:
-	platform_driver_unregister(&platform_driver);
-fail_platform_driver:
 	return ret;
 }
 
@@ -1253,7 +1353,11 @@ module_init(alienware_wmi_init);
 
 static void __exit alienware_wmi_exit(void)
 {
-	platform_device_unregister(platform_device);
+	if (interface == WMAX)
+		alienware_wmax_wmi_exit();
+	else
+		alienware_legacy_wmi_exit();
+
 	platform_driver_unregister(&platform_driver);
 }
 
Signature · 1 line
2.48.1
author maintainer
#3 lore raw

PATCH v7 3/14 platform/x86: alienware-wmi: Add a state container for thermal control methods

In reply to Kurt Borja

Refactor all thermal control methods to use the newly defined awcc_priv state container instead of global variables. While at it, rename create_thermal_profile() to awcc_platform_profile_init() and introduce alienware_awcc_setup() to set up the "AWCC" WMI device driver data.

---
 drivers/platform/x86/dell/alienware-wmi.c | 50 ++++++++++++++++++-----
 1 file changed, 39 insertions(+), 11 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +39 -11
index 5ce954137f9d..6a3385350725 100644
@@ -412,6 +412,12 @@ struct wmax_u32_args {
 	u8 arg3;
 };
 
+struct awcc_priv {
+	struct wmi_device *wdev;
+	struct device *ppdev;
+	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
+};
+
 struct alienfx_priv {
 	struct platform_device *pdev;
 	struct led_classdev global_led;
@@ -424,8 +430,6 @@ struct alienfx_platdata {
 	struct wmi_device *wdev;
 };
 
-static enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
-
 static u8 interface;
 
 /*
@@ -1060,6 +1064,8 @@ static int thermal_profile_get(struct device *dev,
 static int thermal_profile_set(struct device *dev,
 			       enum platform_profile_option profile)
 {
+	struct awcc_priv *priv = dev_get_drvdata(dev);
+
 	if (quirks->gmode) {
 		u32 gmode_status;
 		int ret;
@@ -1080,12 +1086,13 @@ static int thermal_profile_set(struct device *dev,
 		}
 	}
 
-	return wmax_thermal_control(supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
 }
 
 static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 {
 	enum platform_profile_option profile;
+	struct awcc_priv *priv = drvdata;
 	enum wmax_thermal_mode mode;
 	u8 sys_desc[4];
 	u32 first_mode;
@@ -1114,7 +1121,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 
 		mode = out_data & WMAX_THERMAL_MODE_MASK;
 		profile = wmax_mode_to_platform_profile[mode];
-		supported_thermal_profiles[profile] = out_data;
+		priv->supported_thermal_profiles[profile] = out_data;
 
 		set_bit(profile, choices);
 	}
@@ -1123,7 +1130,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 		return -ENODEV;
 
 	if (quirks->gmode) {
-		supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
+		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
 		set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
@@ -1138,14 +1145,35 @@ static const struct platform_profile_ops awcc_platform_profile_ops = {
 	.profile_set = thermal_profile_set,
 };
 
-static int create_thermal_profile(struct wmi_device *wdev)
+static int awcc_platform_profile_init(struct wmi_device *wdev)
 {
-	struct device *ppdev;
+	struct awcc_priv *priv = dev_get_drvdata(&wdev->dev);
+
+	priv->ppdev = devm_platform_profile_register(&wdev->dev, "alienware-wmi",
+						     priv, &awcc_platform_profile_ops);
 
-	ppdev = devm_platform_profile_register(&wdev->dev, "alienware-wmi",
-					       NULL, &awcc_platform_profile_ops);
+	return PTR_ERR_OR_ZERO(priv->ppdev);
+}
 
-	return PTR_ERR_OR_ZERO(ppdev);
+static int alienware_awcc_setup(struct wmi_device *wdev)
+{
+	struct awcc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->wdev = wdev;
+	dev_set_drvdata(&wdev->dev, priv);
+
+	if (quirks->thermal) {
+		ret = awcc_platform_profile_init(wdev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 /*
@@ -1273,7 +1301,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	int ret;
 
 	if (quirks->thermal) {
-		ret = create_thermal_profile(wdev);
+		ret = alienware_awcc_setup(wdev);
 	} else {
 		ret = alienware_alienfx_setup(&pdata);
 		if (ret < 0)
Signature · 1 line
2.48.1
author maintainer
#4 lore raw

PATCH v7 4/14 platform/x86: alienware-wmi: Refactor LED control methods

In reply to Kurt Borja

Both WMI devices handled by this module specify a distinct interface for LED control. Previously this module handled this by dynamically adapting arguments passed to wmi_evaluate_method() based on the interface global variable.

To avoid the use of global variables, and enable the migration to non-deprecated WMI methods, let the WMI drivers define upd_led and upd_brightness operations, which completely replace alienware_update_led() and wmax_brightness().

Also define alienware_wmi_command(), which serves as a wrapper for wmidev_evaluate_method(). This new method is very similar to alienware_wmax_command() but is WMI device agnostic.

---
 drivers/platform/x86/dell/alienware-wmi.c | 166 ++++++++++++++--------
 1 file changed, 104 insertions(+), 62 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +104 -62
index 6a3385350725..b069c5c585be 100644
@@ -10,6 +10,7 @@
 #include <linux/acpi.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/platform_profile.h>
@@ -426,12 +427,43 @@ struct alienfx_priv {
 	u8 lighting_control_state;
 };
 
+struct alienfx_ops {
+	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
+		       u8 location);
+	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
+			      u8 brightness);
+};
+
 struct alienfx_platdata {
 	struct wmi_device *wdev;
+	struct alienfx_ops ops;
 };
 
 static u8 interface;
 
+static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+				 void *in_args, size_t in_size, u32 *out_data)
+{
+	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_buffer in = {in_size, in_args};
+	acpi_status ret;
+
+	ret = wmidev_evaluate_method(wdev, 0, method_id, &in, out_data ? &out : NULL);
+	if (ACPI_FAILURE(ret))
+		return -EIO;
+
+	union acpi_object *obj __free(kfree) = out.pointer;
+
+	if (out_data) {
+		if (obj && obj->type == ACPI_TYPE_INTEGER)
+			*out_data = (u32)obj->integer.value;
+		else
+			return -ENOMSG;
+	}
+
+	return 0;
+}
+
 /*
  * Helpers used for zone control
  */
@@ -462,46 +494,6 @@ static int parse_rgb(const char *buf, struct color_platform *colors)
 /*
  * Individual RGB zone control
  */
-static int alienware_update_led(struct alienfx_priv *priv, u8 location)
-{
-	int method_id;
-	acpi_status status;
-	char *guid;
-	struct acpi_buffer input;
-	struct legacy_led_args legacy_args;
-	struct wmax_led_args wmax_basic_args;
-	if (interface == WMAX) {
-		wmax_basic_args.led_mask = 1 << location;
-		wmax_basic_args.colors = priv->colors[location];
-		wmax_basic_args.state = priv->lighting_control_state;
-		guid = WMAX_CONTROL_GUID;
-		method_id = WMAX_METHOD_ZONE_CONTROL;
-
-		input.length = sizeof(wmax_basic_args);
-		input.pointer = &wmax_basic_args;
-	} else {
-		legacy_args.colors = priv->colors[location];
-		legacy_args.brightness = priv->global_brightness;
-		legacy_args.state = 0;
-		if (priv->lighting_control_state == LEGACY_BOOTING ||
-		    priv->lighting_control_state == LEGACY_SUSPEND) {
-			guid = LEGACY_POWER_CONTROL_GUID;
-			legacy_args.state = priv->lighting_control_state;
-		} else
-			guid = LEGACY_CONTROL_GUID;
-		method_id = location + 1;
-
-		input.length = sizeof(legacy_args);
-		input.pointer = &legacy_args;
-	}
-	pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
-
-	status = wmi_evaluate_method(guid, 0, method_id, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: zone set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
 			 char *buf, u8 location)
 {
@@ -518,13 +510,14 @@ static ssize_t zone_store(struct device *dev, struct device_attribute *attr,
 {
 	struct alienfx_priv *priv = dev_get_drvdata(dev);
 	struct color_platform *colors = &priv->colors[location];
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	int ret;
 
 	ret = parse_rgb(buf, colors);
 	if (ret)
 		return ret;
 
-	ret = alienware_update_led(priv, location);
+	ret = pdata->ops.upd_led(priv, pdata->wdev, location);
 
 	return ret ? ret : count;
 }
@@ -660,36 +653,17 @@ static struct attribute_group zone_attribute_group = {
 /*
  * LED Brightness (Global)
  */
-static int wmax_brightness(int brightness)
-{
-	acpi_status status;
-	struct acpi_buffer input;
-	struct wmax_brightness_args args = {
-		.led_mask = 0xFF,
-		.percentage = brightness,
-	};
-	input.length = sizeof(args);
-	input.pointer = &args;
-	status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-				     WMAX_METHOD_BRIGHTNESS, &input, NULL);
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: brightness set failure: %u\n", status);
-	return ACPI_FAILURE(status);
-}
-
 static void global_led_set(struct led_classdev *led_cdev,
 			   enum led_brightness brightness)
 {
 	struct alienfx_priv *priv = container_of(led_cdev, struct alienfx_priv,
 						 global_led);
+	struct alienfx_platdata *pdata = dev_get_platdata(&priv->pdev->dev);
 	int ret;
 
 	priv->global_brightness = brightness;
 
-	if (interface == WMAX)
-		ret = wmax_brightness(brightness);
-	else
-		ret = alienware_update_led(priv, 0);
+	ret = pdata->ops.upd_brightness(priv, pdata->wdev, brightness);
 	if (ret)
 		pr_err("LED brightness update failed\n");
 }
@@ -1254,10 +1228,49 @@ static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 /*
  * Legacy WMI driver
  */
+static int legacy_wmi_update_led(struct alienfx_priv *priv,
+				 struct wmi_device *wdev, u8 location)
+{
+	struct legacy_led_args legacy_args = {
+		.colors = priv->colors[location],
+		.brightness = priv->global_brightness,
+		.state = 0,
+	};
+	struct acpi_buffer input;
+	acpi_status status;
+
+	if (legacy_args.state != LEGACY_RUNNING) {
+		legacy_args.state = priv->lighting_control_state;
+
+		input.length = sizeof(legacy_args);
+		input.pointer = &legacy_args;
+
+		status = wmi_evaluate_method(LEGACY_POWER_CONTROL_GUID, 0,
+					     location + 1, &input, NULL);
+		if (ACPI_FAILURE(status))
+			return -EIO;
+
+		return 0;
+	}
+
+	return alienware_wmi_command(wdev, location + 1, &legacy_args,
+				     sizeof(legacy_args), NULL);
+}
+
+static int legacy_wmi_update_brightness(struct alienfx_priv *priv,
+					struct wmi_device *wdev, u8 brightness)
+{
+	return legacy_wmi_update_led(priv, wdev, 0);
+}
+
 static int legacy_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = legacy_wmi_update_led,
+			.upd_brightness = legacy_wmi_update_brightness,
+		},
 	};
 
 	return alienware_alienfx_setup(&pdata);
@@ -1292,10 +1305,39 @@ static void __exit alienware_legacy_wmi_exit(void)
 /*
  * WMAX WMI driver
  */
+static int wmax_wmi_update_led(struct alienfx_priv *priv,
+			       struct wmi_device *wdev, u8 location)
+{
+	struct wmax_led_args in_args = {
+		.led_mask = 1 << location,
+		.colors = priv->colors[location],
+		.state = priv->lighting_control_state,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args,
+				     sizeof(in_args), NULL);
+}
+
+static int wmax_wmi_update_brightness(struct alienfx_priv *priv,
+				      struct wmi_device *wdev, u8 brightness)
+{
+	struct wmax_brightness_args in_args = {
+		.led_mask = 0xFF,
+		.percentage = brightness,
+	};
+
+	return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args,
+				     sizeof(in_args), NULL);
+}
+
 static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 {
 	struct alienfx_platdata pdata = {
 		.wdev = wdev,
+		.ops = {
+			.upd_led = wmax_wmi_update_led,
+			.upd_brightness = wmax_wmi_update_brightness,
+		},
 	};
 	struct platform_device *pdev;
 	int ret;
Signature · 1 line
2.48.1
author maintainer
#5 lore raw

PATCH v7 5/14 platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods

In reply to Kurt Borja

Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to use alienware_wmi_command() instead of alienware_wmax_command() which uses deprecated WMI methods.

---
 drivers/platform/x86/dell/alienware-wmi.c | 80 +++++++++++++----------
 1 file changed, 45 insertions(+), 35 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +45 -35
index b069c5c585be..a219d68ff84e 100644
@@ -711,53 +711,57 @@ static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
 static ssize_t cable_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
+
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
 
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_CABLE, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
 		else if (out_data == 1)
 			return sysfs_emit(buf, "unconnected [connected] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
 static ssize_t source_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
 
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_HDMI_STATUS, &out_data);
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
 
-	if (ACPI_SUCCESS(status)) {
+	if (!ret) {
 		if (out_data == 1)
 			return sysfs_emit(buf, "[input] gpu unknown\n");
 		else if (out_data == 2)
 			return sysfs_emit(buf, "input [gpu] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
+
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);
 	return sysfs_emit(buf, "input gpu [unknown]\n");
 }
 
 static ssize_t source_store(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args args;
-	acpi_status status;
+	int ret;
 
 	if (strcmp(buf, "gpu\n") == 0)
 		args.arg = 1;
@@ -767,12 +771,12 @@ static ssize_t source_store(struct device *dev, struct device_attribute *attr,
 		args.arg = 3;
 	pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_HDMI_SOURCE, NULL);
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args,
+				    sizeof(args), NULL);
+
+	if (ret < 0)
+		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);
 
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
-		       status);
 	return count;
 }
 
@@ -805,22 +809,24 @@ static const struct attribute_group hdmi_attribute_group = {
 static ssize_t status_show(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
 
-	status =
-	    alienware_wmax_command(&in_args, sizeof(in_args),
-				   WMAX_METHOD_AMPLIFIER_CABLE, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[unconnected] connected unknown\n");
 		else if (out_data == 1)
 			return sysfs_emit(buf, "unconnected [connected] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);
 	return sysfs_emit(buf, "unconnected connected [unknown]\n");
 }
 
@@ -850,15 +856,17 @@ static const struct attribute_group amplifier_attribute_group = {
 static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
 			      char *buf)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args in_args = {
 		.arg = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_DEEP_SLEEP_STATUS, &out_data);
-	if (ACPI_SUCCESS(status)) {
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS,
+				    &in_args, sizeof(in_args), &out_data);
+
+	if (!ret) {
 		if (out_data == 0)
 			return sysfs_emit(buf, "[disabled] s5 s5_s4\n");
 		else if (out_data == 1)
@@ -866,15 +874,17 @@ static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr,
 		else if (out_data == 2)
 			return sysfs_emit(buf, "disabled s5 [s5_s4]\n");
 	}
-	pr_err("alienware-wmi: unknown deep sleep status: %d\n", status);
+
+	pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);
 	return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n");
 }
 
 static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
+	struct alienfx_platdata *pdata = dev_get_platdata(dev);
 	struct wmax_basic_args args;
-	acpi_status status;
+	int ret;
 
 	if (strcmp(buf, "disabled\n") == 0)
 		args.arg = 0;
@@ -884,12 +894,12 @@ static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr
 		args.arg = 2;
 	pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf);
 
-	status = alienware_wmax_command(&args, sizeof(args),
-					WMAX_METHOD_DEEP_SLEEP_CONTROL, NULL);
+	ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL,
+				    &args, sizeof(args), NULL);
+
+	if (!ret)
+		pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);
 
-	if (ACPI_FAILURE(status))
-		pr_err("alienware-wmi: deep sleep control failed: results: %u\n",
-			status);
 	return count;
 }
 
Signature · 1 line
2.48.1
author maintainer
#6 lore raw

PATCH v7 6/14 platform/x86: alienware-wmi: Refactor thermal control methods

In reply to Kurt Borja

Refactor thermal control methods to use alienware_wmi_command() instead of alienware_wmax_command().

Drop alienware_wmax_command() as there is no more users left.

---
 drivers/platform/x86/dell/alienware-wmi.c | 87 ++++++++---------------
 1 file changed, 30 insertions(+), 57 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +30 -57
index a219d68ff84e..e63f232dab80 100644
@@ -676,34 +676,6 @@ static enum led_brightness global_led_get(struct led_classdev *led_cdev)
 	return priv->global_brightness;
 }
 
-static acpi_status alienware_wmax_command(void *in_args, size_t in_size,
-					  u32 command, u32 *out_data)
-{
-	acpi_status status;
-	union acpi_object *obj;
-	struct acpi_buffer input;
-	struct acpi_buffer output;
-
-	input.length = in_size;
-	input.pointer = in_args;
-	if (out_data) {
-		output.length = ACPI_ALLOCATE_BUFFER;
-		output.pointer = NULL;
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, &output);
-		if (ACPI_SUCCESS(status)) {
-			obj = (union acpi_object *)output.pointer;
-			if (obj && obj->type == ACPI_TYPE_INTEGER)
-				*out_data = (u32)obj->integer.value;
-		}
-		kfree(output.pointer);
-	} else {
-		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
-					     command, &input, NULL);
-	}
-	return status;
-}
-
 /*
  *	The HDMI mux sysfs node indicates the status of the HDMI input mux.
  *	It can toggle between standard system GPU output and HDMI input.
@@ -949,7 +921,8 @@ static bool is_wmax_thermal_code(u32 code)
 	return false;
 }
 
-static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
+static int wmax_thermal_information(struct wmi_device *wdev, u8 operation,
+				    u8 arg, u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -957,14 +930,12 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
-
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_INFORMATION,
-					out_data);
+	int ret;
 
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_INFORMATION,
+				    &in_args, sizeof(in_args), out_data);
+	if (ret < 0)
+		return ret;
 
 	if (*out_data == WMAX_FAILURE_CODE)
 		return -EBADRQC;
@@ -972,7 +943,7 @@ static int wmax_thermal_information(u8 operation, u8 arg, u32 *out_data)
 	return 0;
 }
 
-static int wmax_thermal_control(u8 profile)
+static int wmax_thermal_control(struct wmi_device *wdev, u8 profile)
 {
 	struct wmax_u32_args in_args = {
 		.operation = WMAX_OPERATION_ACTIVATE_PROFILE,
@@ -980,15 +951,13 @@ static int wmax_thermal_control(u8 profile)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
 	u32 out_data;
+	int ret;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_THERMAL_CONTROL,
-					&out_data);
-
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_THERMAL_CONTROL,
+				    &in_args, sizeof(in_args), &out_data);
+	if (ret)
+		return ret;
 
 	if (out_data == WMAX_FAILURE_CODE)
 		return -EBADRQC;
@@ -996,7 +965,8 @@ static int wmax_thermal_control(u8 profile)
 	return 0;
 }
 
-static int wmax_game_shift_status(u8 operation, u32 *out_data)
+static int wmax_game_shift_status(struct wmi_device *wdev, u8 operation,
+				  u32 *out_data)
 {
 	struct wmax_u32_args in_args = {
 		.operation = operation,
@@ -1004,14 +974,13 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 		.arg2 = 0,
 		.arg3 = 0,
 	};
-	acpi_status status;
+	int ret;
 
-	status = alienware_wmax_command(&in_args, sizeof(in_args),
-					WMAX_METHOD_GAME_SHIFT_STATUS,
-					out_data);
+	ret = alienware_wmi_command(wdev, WMAX_METHOD_GAME_SHIFT_STATUS,
+				    &in_args, sizeof(in_args), out_data);
 
-	if (ACPI_FAILURE(status))
-		return -EIO;
+	if (ret < 0)
+		return ret;
 
 	if (*out_data == WMAX_FAILURE_CODE)
 		return -EOPNOTSUPP;
@@ -1022,10 +991,11 @@ static int wmax_game_shift_status(u8 operation, u32 *out_data)
 static int thermal_profile_get(struct device *dev,
 			       enum platform_profile_option *profile)
 {
+	struct awcc_priv *priv = dev_get_drvdata(dev);
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_CURRENT_PROFILE,
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_CURRENT_PROFILE,
 				       0, &out_data);
 
 	if (ret < 0)
@@ -1054,7 +1024,8 @@ static int thermal_profile_set(struct device *dev,
 		u32 gmode_status;
 		int ret;
 
-		ret = wmax_game_shift_status(WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
+		ret = wmax_game_shift_status(priv->wdev,
+					     WMAX_OPERATION_GET_GAME_SHIFT_STATUS,
 					     &gmode_status);
 
 		if (ret < 0)
@@ -1062,7 +1033,8 @@ static int thermal_profile_set(struct device *dev,
 
 		if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) ||
 		    (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) {
-			ret = wmax_game_shift_status(WMAX_OPERATION_TOGGLE_GAME_SHIFT,
+			ret = wmax_game_shift_status(priv->wdev,
+						     WMAX_OPERATION_TOGGLE_GAME_SHIFT,
 						     &gmode_status);
 
 			if (ret < 0)
@@ -1070,7 +1042,8 @@ static int thermal_profile_set(struct device *dev,
 		}
 	}
 
-	return wmax_thermal_control(priv->supported_thermal_profiles[profile]);
+	return wmax_thermal_control(priv->wdev,
+				    priv->supported_thermal_profiles[profile]);
 }
 
 static int thermal_profile_probe(void *drvdata, unsigned long *choices)
@@ -1083,7 +1056,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 	u32 out_data;
 	int ret;
 
-	ret = wmax_thermal_information(WMAX_OPERATION_SYS_DESCRIPTION,
+	ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_SYS_DESCRIPTION,
 				       0, (u32 *) &sys_desc);
 	if (ret < 0)
 		return ret;
@@ -1091,7 +1064,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 	first_mode = sys_desc[0] + sys_desc[1];
 
 	for (u32 i = 0; i < sys_desc[3]; i++) {
-		ret = wmax_thermal_information(WMAX_OPERATION_LIST_IDS,
+		ret = wmax_thermal_information(priv->wdev, WMAX_OPERATION_LIST_IDS,
 					       i + first_mode, &out_data);
 
 		if (ret == -EIO)
Signature · 1 line
2.48.1
author maintainer
#7 lore raw

PATCH v7 7/14 platform/x86: alienware-wmi: Split DMI table

In reply to Kurt Borja

Split thermal features into a new DMI table to support upcoming file split. While at it:

Rename quirk_entry -> alienfx_quirks,
Rename quirks -> alienfx

and change hdmi_mux, amplifier and deepslp types to bool, because they are already being implicitly used as bools.

---
 drivers/platform/x86/dell/alienware-wmi.c | 363 +++++++++++-----------
 1 file changed, 175 insertions(+), 188 deletions(-)
drivers/platform/x86/dell/alienware-wmi.c +175 -188
index e63f232dab80..e426b266239d 100644
@@ -114,102 +114,68 @@ static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_
 	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
 };
 
-struct quirk_entry {
+struct alienfx_quirks {
 	u8 num_zones;
-	u8 hdmi_mux;
-	u8 amplifier;
-	u8 deepslp;
-	bool thermal;
-	bool gmode;
+	bool hdmi_mux;
+	bool amplifier;
+	bool deepslp;
 };
 
-static struct quirk_entry *quirks;
+static struct alienfx_quirks *alienfx;
 
 
-static struct quirk_entry quirk_inspiron5675 = {
+static struct alienfx_quirks quirk_inspiron5675 = {
 	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_unknown = {
+static struct alienfx_quirks quirk_unknown = {
 	.num_zones = 2,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_x51_r1_r2 = {
+static struct alienfx_quirks quirk_x51_r1_r2 = {
 	.num_zones = 3,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_x51_r3 = {
+static struct alienfx_quirks quirk_x51_r3 = {
 	.num_zones = 4,
-	.hdmi_mux = 0,
-	.amplifier = 1,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = false,
+	.amplifier = true,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_asm100 = {
+static struct alienfx_quirks quirk_asm100 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = false,
+	.deepslp = false,
 };
 
-static struct quirk_entry quirk_asm200 = {
+static struct alienfx_quirks quirk_asm200 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 0,
-	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = false,
+	.deepslp = true,
 };
 
-static struct quirk_entry quirk_asm201 = {
+static struct alienfx_quirks quirk_asm201 = {
 	.num_zones = 2,
-	.hdmi_mux = 1,
-	.amplifier = 1,
-	.deepslp = 1,
-	.thermal = false,
-	.gmode = false,
-};
-
-static struct quirk_entry quirk_g_series = {
-	.num_zones = 0,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = true,
-};
-
-static struct quirk_entry quirk_x_series = {
-	.num_zones = 0,
-	.hdmi_mux = 0,
-	.amplifier = 0,
-	.deepslp = 0,
-	.thermal = true,
-	.gmode = false,
+	.hdmi_mux = true,
+	.amplifier = true,
+	.deepslp = true,
 };
 
 static int __init dmi_matched(const struct dmi_system_id *dmi)
 {
-	quirks = dmi->driver_data;
+	alienfx = dmi->driver_data;
 	return 1;
 }
 
@@ -241,51 +207,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_asm201,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware m16 R1 AMD",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m16 R1 AMD"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware m17 R5",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware m18 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware x15 R1",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
-		},
-		.driver_data = &quirk_x_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Alienware x17 R2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
-		},
-		.driver_data = &quirk_x_series,
-	},
 	{
 		.callback = dmi_matched,
 		.ident = "Alienware X51 R1",
@@ -313,60 +234,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_x51_r3,
 	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5510",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5511",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G15 5515",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G3 3500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G3 3590",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
-		},
-		.driver_data = &quirk_g_series,
-	},
-	{
-		.callback = dmi_matched,
-		.ident = "Dell Inc. G5 5500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
-		},
-		.driver_data = &quirk_g_series,
-	},
 	{
 		.callback = dmi_matched,
 		.ident = "Dell Inc. Inspiron 5675",
@@ -441,6 +308,116 @@ struct alienfx_platdata {
 
 static u8 interface;
 
+struct awcc_quirks {
+	bool pprof;
+	bool gmode;
+};
+
+static struct awcc_quirks g_series_quirks = {
+	.pprof = true,
+	.gmode = true,
+};
+
+static struct awcc_quirks generic_quirks = {
+	.pprof = true,
+	.gmode = false,
+};
+
+static struct awcc_quirks empty_quirks;
+
+static const struct dmi_system_id awcc_dmi_table[] __initconst = {
+	{
+		.ident = "Alienware m16 R1 AMD",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m16 R1 AMD"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware m17 R5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware m18 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x15 R1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Alienware x17 R2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"),
+		},
+		.driver_data = &generic_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5511",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G15 5515",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G3 3590",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+	{
+		.ident = "Dell Inc. G5 5500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"),
+		},
+		.driver_data = &g_series_quirks,
+	},
+};
+
+static struct awcc_quirks *awcc;
+
 static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 				 void *in_args, size_t in_size, u32 *out_data)
 {
@@ -623,7 +600,7 @@ static DEVICE_ATTR_RW(lighting_control_state);
 static umode_t zone_attr_visible(struct kobject *kobj,
 				 struct attribute *attr, int n)
 {
-	if (n < quirks->num_zones + 1)
+	if (n < alienfx->num_zones + 1)
 		return attr->mode;
 
 	return 0;
@@ -631,7 +608,7 @@ static umode_t zone_attr_visible(struct kobject *kobj,
 
 static bool zone_group_visible(struct kobject *kobj)
 {
-	return quirks->num_zones > 0;
+	return alienfx->num_zones > 0;
 }
 DEFINE_SYSFS_GROUP_VISIBLE(zone);
 
@@ -757,7 +734,7 @@ static DEVICE_ATTR_RW(source);
 
 static bool hdmi_group_visible(struct kobject *kobj)
 {
-	return quirks->hdmi_mux;
+	return alienfx->hdmi_mux;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi);
 
@@ -806,7 +783,7 @@ static DEVICE_ATTR_RO(status);
 
 static bool amplifier_group_visible(struct kobject *kobj)
 {
-	return quirks->amplifier;
+	return alienfx->amplifier;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier);
 
@@ -879,7 +856,7 @@ static DEVICE_ATTR_RW(deepsleep);
 
 static bool deepsleep_group_visible(struct kobject *kobj)
 {
-	return quirks->deepslp;
+	return alienfx->deepslp;
 }
 DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep);
 
@@ -1020,7 +997,7 @@ static int thermal_profile_set(struct device *dev,
 {
 	struct awcc_priv *priv = dev_get_drvdata(dev);
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		u32 gmode_status;
 		int ret;
 
@@ -1086,7 +1063,7 @@ static int thermal_profile_probe(void *drvdata, unsigned long *choices)
 	if (bitmap_empty(choices, PLATFORM_PROFILE_LAST))
 		return -ENODEV;
 
-	if (quirks->gmode) {
+	if (awcc->gmode) {
 		priv->supported_thermal_profiles[PLATFORM_PROFILE_PERFORMANCE] =
 			WMAX_THERMAL_MODE_GMODE;
 
@@ -1124,7 +1101,7 @@ static int alienware_awcc_setup(struct wmi_device *wdev)
 	priv->wdev = wdev;
 	dev_set_drvdata(&wdev->dev, priv);
 
-	if (quirks->thermal) {
+	if (awcc->pprof) {
 		ret = awcc_platform_profile_init(wdev);
 		if (ret)
 			return ret;
@@ -1325,7 +1302,7 @@ static int wmax_wmi_probe(struct wmi_device *wdev, const void *context)
 	struct platform_device *pdev;
 	int ret;
 
-	if (quirks->thermal) {
+	if (awcc) {
 		ret = alienware_awcc_setup(wdev);
 	} else {
 		ret = alienware_alienfx_setup(&pdata);
@@ -1358,6 +1335,26 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 
 static int __init alienware_wmax_wmi_init(void)
 {
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(awcc_dmi_table);
+	if (id)
+		awcc = id->driver_data;
+
+	if (force_platform_profile) {
+		if (!awcc)
+			awcc = &empty_quirks;
+
+		awcc->pprof = true;
+	}
+
+	if (force_gmode) {
+		if (awcc)
+			awcc->gmode = true;
+		else
+			pr_warn("force_gmode requires platform profile support\n");
+	}
+
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
@@ -1371,18 +1368,8 @@ static int __init alienware_wmi_init(void)
 	int ret;
 
 	dmi_check_system(alienware_quirks);
-	if (quirks == NULL)
-		quirks = &quirk_unknown;
-
-	if (force_platform_profile)
-		quirks->thermal = true;
-
-	if (force_gmode) {
-		if (quirks->thermal)
-			quirks->gmode = true;
-		else
-			pr_warn("force_gmode requires platform profile support\n");
-	}
+	if (!alienfx)
+		alienfx = &quirk_unknown;
 
 	ret = platform_driver_register(&platform_driver);
 	if (ret < 0)
Signature · 1 line
2.48.1
author maintainer
#8 lore raw

PATCH v7 8/14 MAINTAINERS: Update ALIENWARE WMI DRIVER entry

In reply to Kurt Borja

Dell has been inactive in its maintainership role of this driver since around 2021. Due to this, add myself as a maintainer and update path to support upcoming changes.

---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
MAINTAINERS +3 -1
index 936e80f2c9ce..09a117a1f89e 100644
@@ -792,10 +792,12 @@ F:	Documentation/admin-guide/perf/alibaba_pmu.rst
 F:	drivers/perf/alibaba_uncore_drw_pmu.c
 
 ALIENWARE WMI DRIVER
+M:	Kurt Borja <[email protected]>
+L:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	Documentation/wmi/devices/alienware-wmi.rst
-F:	drivers/platform/x86/dell/alienware-wmi.c
+F:	drivers/platform/x86/dell/alienware-wmi*
 
 ALLEGRO DVT VIDEO IP CORE DRIVER
 M:	Michael Tretter <[email protected]>
Signature · 1 line
2.48.1
author maintainer
#9 lore raw

PATCH v7 9/14 platform/x86: Rename alienware-wmi.c

In reply to Kurt Borja

Rename alienware-wmi to support upcoming split.

---
 drivers/platform/x86/dell/Makefile                               | 1 +
 .../platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c}  | 0
 2 files changed, 1 insertion(+)
 rename drivers/platform/x86/dell/{alienware-wmi.c => alienware-wmi-base.c} (100%)
drivers/platform/x86/dell/Makefile +1 -0
index bb3cbd470a46..f8aec8502c2f 100644
@@ -5,6 +5,7 @@
 #
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+alienware-wmi-objs			:= alienware-wmi-base.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c renamed from drivers/platform/x86/dell/alienware-wmi.c +0 -0
similarity index 100%
rename from drivers/platform/x86/dell/alienware-wmi.c
rename to drivers/platform/x86/dell/alienware-wmi-base.c
Signature · 1 line
2.48.1
author maintainer
#10 lore raw

PATCH v7 10/14 platform/x86: Add alienware-wmi.h

In reply to Kurt Borja

Add a header file for alienware-wmi with shared resources to support the upcoming file split.

---
 .../platform/x86/dell/alienware-wmi-base.c    | 67 +++-------------
 drivers/platform/x86/dell/alienware-wmi.h     | 78 +++++++++++++++++++
 2 files changed, 87 insertions(+), 58 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h
drivers/platform/x86/dell/alienware-wmi-base.c +9 -58
index e426b266239d..6824a79292b7 100644
@@ -17,10 +17,7 @@
 #include <linux/dmi.h>
 #include <linux/leds.h>
 #include <linux/wmi.h>
-
-#define LEGACY_CONTROL_GUID		"A90597CE-A997-11DA-B012-B622A1EF5492"
-#define LEGACY_POWER_CONTROL_GUID	"A80593CE-A997-11DA-B012-B622A1EF5492"
-#define WMAX_CONTROL_GUID		"A70591CE-A997-11DA-B012-B622A1EF5492"
+#include "alienware-wmi.h"
 
 #define WMAX_METHOD_HDMI_SOURCE		0x1
 #define WMAX_METHOD_HDMI_STATUS		0x2
@@ -55,18 +52,6 @@ enum INTERFACE_FLAGS {
 	WMAX,
 };
 
-enum LEGACY_CONTROL_STATES {
-	LEGACY_RUNNING = 1,
-	LEGACY_BOOTING = 0,
-	LEGACY_SUSPEND = 3,
-};
-
-enum WMAX_CONTROL_STATES {
-	WMAX_RUNNING = 0xFF,
-	WMAX_BOOTING = 0,
-	WMAX_SUSPEND = 3,
-};
-
 enum WMAX_THERMAL_INFORMATION_OPERATIONS {
 	WMAX_OPERATION_SYS_DESCRIPTION		= 0x02,
 	WMAX_OPERATION_LIST_IDS			= 0x03,
@@ -114,15 +99,7 @@ static const enum platform_profile_option wmax_mode_to_platform_profile[THERMAL_
 	[THERMAL_MODE_BASIC_PERFORMANCE]		= PLATFORM_PROFILE_PERFORMANCE,
 };
 
-struct alienfx_quirks {
-	u8 num_zones;
-	bool hdmi_mux;
-	bool amplifier;
-	bool deepslp;
-};
-
-static struct alienfx_quirks *alienfx;
-
+struct alienfx_quirks *alienfx;
 
 static struct alienfx_quirks quirk_inspiron5675 = {
 	.num_zones = 2,
@@ -246,12 +223,6 @@ static const struct dmi_system_id alienware_quirks[] __initconst = {
 	{}
 };
 
-struct color_platform {
-	u8 blue;
-	u8 green;
-	u8 red;
-} __packed;
-
 struct wmax_brightness_args {
 	u32 led_mask;
 	u32 percentage;
@@ -286,26 +257,6 @@ struct awcc_priv {
 	enum wmax_thermal_mode supported_thermal_profiles[PLATFORM_PROFILE_LAST];
 };
 
-struct alienfx_priv {
-	struct platform_device *pdev;
-	struct led_classdev global_led;
-	struct color_platform colors[4];
-	u8 global_brightness;
-	u8 lighting_control_state;
-};
-
-struct alienfx_ops {
-	int (*upd_led)(struct alienfx_priv *priv, struct wmi_device *wdev,
-		       u8 location);
-	int (*upd_brightness)(struct alienfx_priv *priv, struct wmi_device *wdev,
-			      u8 brightness);
-};
-
-struct alienfx_platdata {
-	struct wmi_device *wdev;
-	struct alienfx_ops ops;
-};
-
 static u8 interface;
 
 struct awcc_quirks {
@@ -418,8 +369,8 @@ static const struct dmi_system_id awcc_dmi_table[] __initconst = {
 
 static struct awcc_quirks *awcc;
 
-static int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
-				 void *in_args, size_t in_size, u32 *out_data)
+int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
+			  void *in_args, size_t in_size, u32 *out_data)
 {
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_buffer in = {in_size, in_args};
@@ -1165,7 +1116,7 @@ static void alienware_alienfx_remove(void *data)
 	platform_device_unregister(pdev);
 }
 
-static int alienware_alienfx_setup(struct alienfx_platdata *pdata)
+int alienware_alienfx_setup(struct alienfx_platdata *pdata)
 {
 	struct device *dev = &pdata->wdev->dev;
 	struct platform_device *pdev;
@@ -1252,12 +1203,12 @@ static struct wmi_driver alienware_legacy_wmi_driver = {
 	.no_singleton = true,
 };
 
-static int __init alienware_legacy_wmi_init(void)
+int __init alienware_legacy_wmi_init(void)
 {
 	return wmi_driver_register(&alienware_legacy_wmi_driver);
 }
 
-static void __exit alienware_legacy_wmi_exit(void)
+void __exit alienware_legacy_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_legacy_wmi_driver);
 }
@@ -1333,7 +1284,7 @@ static struct wmi_driver alienware_wmax_wmi_driver = {
 	.no_singleton = true,
 };
 
-static int __init alienware_wmax_wmi_init(void)
+int __init alienware_wmax_wmi_init(void)
 {
 	const struct dmi_system_id *id;
 
@@ -1358,7 +1309,7 @@ static int __init alienware_wmax_wmi_init(void)
 	return wmi_driver_register(&alienware_wmax_wmi_driver);
 }
 
-static void __exit alienware_wmax_wmi_exit(void)
+void __exit alienware_wmax_wmi_exit(void)
 {
 	wmi_driver_unregister(&alienware_wmax_wmi_driver);
 }
drivers/platform/x86/dell/alienware-wmi.h new file +78 -0

78 lines not on this page · raw message

Signature · 1 line
2.48.1
author maintainer
#11 lore raw

PATCH v7 11/14 platform/x86: Split the alienware-wmi driver

In reply to Kurt Borja

Split alienware-wmi WMI drivers into different files. This is done seamlessly by copying and pasting, however some blocks are reordered.

---
 drivers/platform/x86/dell/Makefile            |   2 +
 .../platform/x86/dell/alienware-wmi-base.c    | 861 ------------------
 .../platform/x86/dell/alienware-wmi-legacy.c  |  95 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    | 790 ++++++++++++++++
 4 files changed, 887 insertions(+), 861 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
drivers/platform/x86/dell/Makefile +2 -0
index f8aec8502c2f..03ba459f3d31 100644
@@ -6,6 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
 alienware-wmi-objs			:= alienware-wmi-base.o
+alienware-wmi-y				+= alienware-wmi-legacy.o
+alienware-wmi-y				+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)			+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi-base.c +0 -861

909 lines not on this page · raw message

drivers/platform/x86/dell/alienware-wmi-legacy.c new file +95 -0

95 lines not on this page · raw message

drivers/platform/x86/dell/alienware-wmi-wmax.c new file +790 -0

790 lines not on this page · raw message

Signature · 1 line
2.48.1
author maintainer
#12 lore raw

PATCH v7 12/14 platform/x86: dell: Modify Makefile alignment

In reply to Kurt Borja

Add one more TAB to each line to support upcoming changes.

---
 drivers/platform/x86/dell/Makefile | 48 +++++++++++++++---------------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/dell/Makefile +24 -24
index 03ba459f3d31..d5718ef34c48 100644
@@ -4,27 +4,27 @@
 # Dell x86 Platform-Specific Drivers
 #
 
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
-alienware-wmi-objs			:= alienware-wmi-base.o
-alienware-wmi-y				+= alienware-wmi-legacy.o
-alienware-wmi-y				+= alienware-wmi-wmax.o
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_PC)			+= dell-pc.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-lis3lv02d.o
-obj-$(CONFIG_DELL_UART_BACKLIGHT)	+= dell-uart-backlight.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-dell-wmi-objs				:= dell-wmi-base.o
-dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)	+= dell-wmi-privacy.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_DDV)		+= dell-wmi-ddv.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
+alienware-wmi-objs				:= alienware-wmi-base.o
+alienware-wmi-y					+= alienware-wmi-legacy.o
+alienware-wmi-y					+= alienware-wmi-wmax.o
+obj-$(CONFIG_DCDBAS)				+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)				+= dell_rbu.o
+obj-$(CONFIG_DELL_PC)				+= dell-pc.o
+obj-$(CONFIG_DELL_SMBIOS)			+= dell-smbios.o
+dell-smbios-objs				:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)		+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)		+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-smo8800.o
+obj-$(CONFIG_DELL_SMO8800)			+= dell-lis3lv02d.o
+obj-$(CONFIG_DELL_UART_BACKLIGHT)		+= dell-uart-backlight.o
+obj-$(CONFIG_DELL_WMI)				+= dell-wmi.o
+dell-wmi-objs					:= dell-wmi-base.o
+dell-wmi-$(CONFIG_DELL_WMI_PRIVACY)		+= dell-wmi-privacy.o
+obj-$(CONFIG_DELL_WMI_AIO)			+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)		+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_DDV)			+= dell-wmi-ddv.o
+obj-$(CONFIG_DELL_WMI_LED)			+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)			+= dell-wmi-sysman/
Signature · 1 line
2.48.1
author maintainer
#13 lore raw

PATCH v7 13/14 platform/x86: Update alienware-wmi config entries

In reply to Kurt Borja

Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them.

---
 drivers/platform/x86/dell/Kconfig         | 30 +++++++++++++++++++----
 drivers/platform/x86/dell/Makefile        |  4 +--
 drivers/platform/x86/dell/alienware-wmi.h | 23 +++++++++++++++++
 3 files changed, 50 insertions(+), 7 deletions(-)
drivers/platform/x86/dell/Kconfig +25 -5
index d09060aedd3f..f8a0dffcaab7 100644
@@ -18,15 +18,35 @@ config ALIENWARE_WMI
 	tristate "Alienware Special feature control"
 	default m
 	depends on ACPI
+	depends on ACPI_WMI
+	depends on DMI
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
-	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware WMI driven features.
+
+	 On legacy devices, it exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated
+	 AlienFX USB MCU such as the X51 and X51-R2.
+
+	 On newer devices, it exposes the AWCC thermal control interface through
+	 known Kernel APIs.
+
+config ALIENWARE_WMI_LEGACY
+	bool "Alienware Legacy WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
+	help
+	 Legacy Alienware WMI driver with AlienFX LED control capabilities.
+
+config ALIENWARE_WMI_WMAX
+	bool "Alienware WMAX WMI device driver"
+	default y
+	depends on ALIENWARE_WMI
 	select ACPI_PLATFORM_PROFILE
 	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
+	 Alienware WMI driver with AlienFX LED, HDMI, amplifier, deep sleep and
+	 AWCC thermal control capabilities.
 
 config DCDBAS
 	tristate "Dell Systems Management Base Driver"
drivers/platform/x86/dell/Makefile +2 -2
index d5718ef34c48..8ac9a933c770 100644
@@ -6,8 +6,8 @@
 
 obj-$(CONFIG_ALIENWARE_WMI)			+= alienware-wmi.o
 alienware-wmi-objs				:= alienware-wmi-base.o
-alienware-wmi-y					+= alienware-wmi-legacy.o
-alienware-wmi-y					+= alienware-wmi-wmax.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_LEGACY)	+= alienware-wmi-legacy.o
+alienware-wmi-$(CONFIG_ALIENWARE_WMI_WMAX)	+= alienware-wmi-wmax.o
 obj-$(CONFIG_DCDBAS)				+= dcdbas.o
 obj-$(CONFIG_DELL_LAPTOP)			+= dell-laptop.o
 obj-$(CONFIG_DELL_RBTN)				+= dell-rbtn.o
drivers/platform/x86/dell/alienware-wmi.h +23 -0
index 39a2597b2fee..ca1ddaa74ad1 100644
@@ -69,10 +69,33 @@ int alienware_wmi_command(struct wmi_device *wdev, u32 method_id,
 
 int alienware_alienfx_setup(struct alienfx_platdata *pdata);
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_LEGACY)
 int __init alienware_legacy_wmi_init(void);
 void __exit alienware_legacy_wmi_exit(void);
+#else
+static inline int alienware_legacy_wmi_init(void)
+{
+	return -ENODEV;
+}
+
+static inline void alienware_legacy_wmi_exit(void)
+{
+}
+#endif
 
+#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
 int __init alienware_wmax_wmi_init(void);
 void __exit alienware_wmax_wmi_exit(void);
+#else
+static inline int alienware_wmax_wmi_init(void)
+{
+	return -ENODEV;
+}
+
+
+static inline void alienware_wmax_wmi_exit(void)
+{
+}
+#endif
 
 #endif
Signature · 1 line
2.48.1
author maintainer
#14 lore raw

PATCH v7 14/14 platform/x86: alienware-wmi: Update header and module information

In reply to Kurt Borja

Update module header and description. Additionally add myself as a module author.

---
 drivers/platform/x86/dell/alienware-wmi-base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/platform/x86/dell/alienware-wmi-base.c +3 -1
index 034e1181e703..56965bdcf478 100644
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Alienware AlienFX control
+ * Alienware special feature control
  *
  * Copyright (C) 2014 Dell Inc <[email protected]>
+ * Copyright (C) 2025 Kurt Borja <[email protected]>
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -16,6 +17,7 @@
 #include "alienware-wmi.h"
 
 MODULE_AUTHOR("Mario Limonciello <[email protected]>");
+MODULE_AUTHOR("Kurt Borja <[email protected]>");
 MODULE_DESCRIPTION("Alienware special feature control");
 MODULE_LICENSE("GPL");
 
Signature · 1 line
2.48.1
maintainer
#15 lore raw
In reply to Kurt Borja
Quoted 10 lines · Kurt Borja

Hi!

I bring some last minute modifications.

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Quoted 11 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

Signature · 1 line
 i.
Quoted 63 lines

Aside from that, I added .pprof to awcc_quirks because I'm going to add support for new features after this series, and it makes sense that force_platform_profile only forces the pprof and not other upcoming features.

~ Kurt
---
[02/14]
- In alienware_alienfx_setup() add a devm action to remove the created platform device
- Drop device_remove_groups() in WMAX .remove callback
- Add PROBE_FORCE_SYNCHRONOUS to the platform driver
- Drop .remove callbacks on both WMI drivers

[03/14]
- Add awcc_platform_profile_init() to create the platform_profile

    device on quirks->thermal == true condition

[07/14]
- Add .pprof to awcc_quirks

[10/14]
- Drop unused member quirks on alienfx_priv (remnant of another version)

v6: https://lore.kernel.org/platform-driver-x86/[email protected]/

Kurt Borja (14):
platform/x86: alienware-wmi: Add a state container for LED control
feature
platform/x86: alienware-wmi: Add WMI Drivers
platform/x86: alienware-wmi: Add a state container for thermal control
methods
platform/x86: alienware-wmi: Refactor LED control methods platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods platform/x86: alienware-wmi: Refactor thermal control methods platform/x86: alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform/x86: Split the alienware-wmi driver
platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries platform/x86: alienware-wmi: Update header and module information

 MAINTAINERS                                   |    4 +-
 drivers/platform/x86/dell/Kconfig             |   30 +-
 drivers/platform/x86/dell/Makefile            |   45 +-
 .../platform/x86/dell/alienware-wmi-base.c    |  496 +++++++
 .../platform/x86/dell/alienware-wmi-legacy.c  |   95 ++
 .../platform/x86/dell/alienware-wmi-wmax.c    |  790 +++++++++++
 drivers/platform/x86/dell/alienware-wmi.c     | 1249 -----------------
 drivers/platform/x86/dell/alienware-wmi.h     |  101 ++
 8 files changed, 1534 insertions(+), 1276 deletions(-)
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c
 delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c
 create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

base-commit: 05dbaf8dd8bf537d4b4eb3115ab42a5fb40ff1f5

author maintainer
#16 lore raw
Quoted 6 lines · Ilpo Järvinen
Quoted 4 lines · Kurt Borja

Hi!

I bring some last minute modifications.

Quoted 8 lines
Quoted 6 lines

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Hi Ilpo,

Quoted 10 lines
Quoted 10 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Quoted 5 lines
Quoted 2 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

In previous discussions with Armin we agreed it made more sense to move WMAX-only groups from alienware-wmi-base.c to alienware-wmi-wmax.c when splitting.

I have no problem in moving them back to .dev_groups though.

Quoted 3 lines

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

I'd love to do this as it would simplify things a LOT, but some user-space tools might expect this attributes to be exposed by the "fake" platform device located at

/sys/devices/platform/alienware-wmi

If it were not for this, I would expose every attribute in the WMI device.

~ Kurt

maintainer
#17 lore raw
Quoted 44 lines · Kurt Borja
Quoted 6 lines · Ilpo Järvinen
Quoted 4 lines · Kurt Borja

Hi!

I bring some last minute modifications.

Quoted 8 lines
Quoted 6 lines

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Hi Ilpo,

Quoted 10 lines
Quoted 10 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Quoted 5 lines
Quoted 2 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

In previous discussions with Armin we agreed it made more sense to move WMAX-only groups from alienware-wmi-base.c to alienware-wmi-wmax.c when splitting.

I have no problem in moving them back to .dev_groups though.

Quoted 3 lines

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

Quoted 8 lines

I'd love to do this as it would simplify things a LOT, but some user-space tools might expect this attributes to be exposed by the "fake" platform device located at

/sys/devices/platform/alienware-wmi

If it were not for this, I would expose every attribute in the WMI device.

Ah, sorry, I didn't pay attention where they were added to. I vaguely recall that discussion.

But still, you could make the groups available through .h and just add them directly into alienfx_groups (with an #ifdef/#else in .h), or is there again something I don't see?

Obviously, .is_visible functions need to be extended slightly to filter out by interface but that should be relatively easy too. Also, the group variable names should be properly prefixed when making them cross file boundary like that.

Signature · 1 line
 i.
author maintainer
#18 lore raw
Quoted 55 lines · Ilpo Järvinen
Quoted 44 lines · Kurt Borja
Quoted 6 lines · Ilpo Järvinen
Quoted 4 lines · Kurt Borja

Hi!

I bring some last minute modifications.

Quoted 8 lines
Quoted 6 lines

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Hi Ilpo,

Quoted 10 lines
Quoted 10 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Quoted 5 lines
Quoted 2 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

In previous discussions with Armin we agreed it made more sense to move WMAX-only groups from alienware-wmi-base.c to alienware-wmi-wmax.c when splitting.

I have no problem in moving them back to .dev_groups though.

Quoted 3 lines

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

Quoted 8 lines

I'd love to do this as it would simplify things a LOT, but some user-space tools might expect this attributes to be exposed by the "fake" platform device located at

/sys/devices/platform/alienware-wmi

If it were not for this, I would expose every attribute in the WMI device.

Quoted 6 lines

Ah, sorry, I didn't pay attention where they were added to. I vaguely recall that discussion.

But still, you could make the groups available through .h and just add them directly into alienfx_groups (with an #ifdef/#else in .h), or is there again something I don't see?

What do you think about something like:

alienware-wmi.h
---------------

#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
#define WMAX_ONLY_GROUP(name) (wmax_##name)

extern const struct attribute_group wmax_hdmi_attribute_group;
...
#else
#define WMAX_ONLY_GROUP(name) NULL
#endif

alienware-wmi-base.c
--------------------
...
static const struct attribute_group *alienfx_groups[] = {
&zone_attribute_group, WMAX_ONLY_GROUP(hdmi_attribute_group), WMAX_ONLY_GROUP(amplifier_attribute_group), WMAX_ONLY_GROUP(deepsleep_attribute_group), NULL
...

};

Quoted 5 lines

Obviously, .is_visible functions need to be extended slightly to filter out by interface but that should be relatively easy too. Also, the group variable names should be properly prefixed when making them cross file boundary like that.

maintainer
#19 lore raw
Quoted 77 lines · Kurt Borja
Quoted 55 lines · Ilpo Järvinen
Quoted 44 lines · Kurt Borja
Quoted 6 lines · Ilpo Järvinen
Quoted 4 lines · Kurt Borja

Hi!

I bring some last minute modifications.

Quoted 8 lines
Quoted 6 lines

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Hi Ilpo,

Quoted 10 lines
Quoted 10 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Quoted 5 lines
Quoted 2 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

In previous discussions with Armin we agreed it made more sense to move WMAX-only groups from alienware-wmi-base.c to alienware-wmi-wmax.c when splitting.

I have no problem in moving them back to .dev_groups though.

Quoted 3 lines

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

Quoted 8 lines

I'd love to do this as it would simplify things a LOT, but some user-space tools might expect this attributes to be exposed by the "fake" platform device located at

/sys/devices/platform/alienware-wmi

If it were not for this, I would expose every attribute in the WMI device.

Quoted 6 lines

Ah, sorry, I didn't pay attention where they were added to. I vaguely recall that discussion.

But still, you could make the groups available through .h and just add them directly into alienfx_groups (with an #ifdef/#else in .h), or is there again something I don't see?

What do you think about something like:

alienware-wmi.h
---------------

#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
#define WMAX_ONLY_GROUP(name) (wmax_##name)

extern const struct attribute_group wmax_hdmi_attribute_group;
...
#else
#define WMAX_ONLY_GROUP(name) NULL
#endif

Quoted 8 lines

alienware-wmi-base.c
--------------------
...
static const struct attribute_group *alienfx_groups[] = {
&zone_attribute_group, WMAX_ONLY_GROUP(hdmi_attribute_group), WMAX_ONLY_GROUP(amplifier_attribute_group), WMAX_ONLY_GROUP(deepsleep_attribute_group),

IMHO, just define WMAX_GROUPS in the header and use it here.

Similar to e.g. ARCH_PCI_DEV_GROUPS in drivers/pci/pci-sysfs.c.

Quoted 11 lines

NULL
...

};

Quoted 5 lines

Obviously, .is_visible functions need to be extended slightly to filter out by interface but that should be relatively easy too. Also, the group variable names should be properly prefixed when making them cross file boundary like that.

Signature · 1 line
 i.
author maintainer
#20 lore raw
Quoted 88 lines · Ilpo Järvinen
Quoted 77 lines · Kurt Borja
Quoted 55 lines · Ilpo Järvinen
Quoted 44 lines · Kurt Borja
Quoted 6 lines · Ilpo Järvinen
Quoted 4 lines · Kurt Borja

Hi!

I bring some last minute modifications.

Quoted 8 lines
Quoted 6 lines

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

Hi Kurt,

Hi Ilpo,

Quoted 10 lines
Quoted 10 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Quoted 5 lines
Quoted 2 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Which is why .dev_groups should be used as it is able to avoid those races on driver core level.

In previous discussions with Armin we agreed it made more sense to move WMAX-only groups from alienware-wmi-base.c to alienware-wmi-wmax.c when splitting.

I have no problem in moving them back to .dev_groups though.

Quoted 3 lines

Why you call device_add_groups() at all? Can't you just insert it into .dev_groups member in alienware_wmax_wmi_driver?

Quoted 8 lines

I'd love to do this as it would simplify things a LOT, but some user-space tools might expect this attributes to be exposed by the "fake" platform device located at

/sys/devices/platform/alienware-wmi

If it were not for this, I would expose every attribute in the WMI device.

Quoted 6 lines

Ah, sorry, I didn't pay attention where they were added to. I vaguely recall that discussion.

But still, you could make the groups available through .h and just add them directly into alienfx_groups (with an #ifdef/#else in .h), or is there again something I don't see?

What do you think about something like:

alienware-wmi.h
---------------

#if IS_ENABLED(CONFIG_ALIENWARE_WMI_WMAX)
#define WMAX_ONLY_GROUP(name) (wmax_##name)

extern const struct attribute_group wmax_hdmi_attribute_group;
...
#else
#define WMAX_ONLY_GROUP(name) NULL
#endif

Quoted 8 lines

alienware-wmi-base.c
--------------------
...
static const struct attribute_group *alienfx_groups[] = {
&zone_attribute_group, WMAX_ONLY_GROUP(hdmi_attribute_group), WMAX_ONLY_GROUP(amplifier_attribute_group), WMAX_ONLY_GROUP(deepsleep_attribute_group),

Quoted 3 lines

IMHO, just define WMAX_GROUPS in the header and use it here.

Similar to e.g. ARCH_PCI_DEV_GROUPS in drivers/pci/pci-sysfs.c.

Thanks for the example, I was overthinking it. I'll send a v8 with this approach!

~ Kurt

Quoted 12 lines
Quoted 12 lines

NULL
...

};

Quoted 5 lines

Obviously, .is_visible functions need to be extended slightly to filter out by interface but that should be relatively easy too. Also, the group variable names should be properly prefixed when making them cross file boundary like that.

#21 lore raw
In reply to Kurt Borja

Am 03.02.25 um 07:20 schrieb Kurt Borja:

Quoted 10 lines

Hi!

I bring some last minute modifications.

I found commit

	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

What? That sound quite strange to me. I CCed Greg because i am curious how this should work.

Quoted 9 lines

I also found commit

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Using PROBE_FORCE_SYNCHRONOUS is not going to solve this problem here, please remove it.

Thanks,
Armin Wolf

Quoted 65 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Aside from that, I added .pprof to awcc_quirks because I'm going to add support for new features after this series, and it makes sense that force_platform_profile only forces the pprof and not other upcoming features.

~ Kurt
---
[02/14]
- In alienware_alienfx_setup() add a devm action to remove the created platform device
- Drop device_remove_groups() in WMAX .remove callback
- Add PROBE_FORCE_SYNCHRONOUS to the platform driver
- Drop .remove callbacks on both WMI drivers

[03/14]
- Add awcc_platform_profile_init() to create the platform_profile

     device on quirks->thermal == true condition

[07/14]
- Add .pprof to awcc_quirks

[10/14]
- Drop unused member quirks on alienfx_priv (remnant of another version)

v6: https://lore.kernel.org/platform-driver-x86/[email protected]/

Kurt Borja (14):
platform/x86: alienware-wmi: Add a state container for LED control
feature
platform/x86: alienware-wmi: Add WMI Drivers
platform/x86: alienware-wmi: Add a state container for thermal control
methods
platform/x86: alienware-wmi: Refactor LED control methods platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods platform/x86: alienware-wmi: Refactor thermal control methods platform/x86: alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform/x86: Split the alienware-wmi driver
platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries platform/x86: alienware-wmi: Update header and module information

  MAINTAINERS                                   |    4 +-
  drivers/platform/x86/dell/Kconfig             |   30 +-
  drivers/platform/x86/dell/Makefile            |   45 +-
  .../platform/x86/dell/alienware-wmi-base.c    |  496 +++++++
  .../platform/x86/dell/alienware-wmi-legacy.c  |   95 ++
  .../platform/x86/dell/alienware-wmi-wmax.c    |  790 +++++++++++
  drivers/platform/x86/dell/alienware-wmi.c     | 1249 -----------------
  drivers/platform/x86/dell/alienware-wmi.h     |  101 ++
  8 files changed, 1534 insertions(+), 1276 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

base-commit: 05dbaf8dd8bf537d4b4eb3115ab42a5fb40ff1f5

author maintainer
#22 lore raw
Quoted 8 lines · Armin Wolf

Am 03.02.25 um 07:20 schrieb Kurt Borja:

Quoted 6 lines

Hi!

I bring some last minute modifications.

I found commit

Quoted 7 lines
Quoted 4 lines
	8d8fc146dd7a ("nvmem: core: switch to use device_add_groups()")

which states that it's unnecesary to call device_remove_groups() when the device is removed, so I dropped it to simplify things.

What? That sound quite strange to me. I CCed Greg because i am curious how this should work.

I'm curious too!

I found it while searching for something like devm_device_add_groups which it turns out, was removed from the kernel.

Quoted 4 lines
Quoted 4 lines

I also found commit

Quoted 8 lines
Quoted 6 lines

957961b6dcc8 ("hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups")

which states that no driver should add sysfs groups while probing the device as it races with userspace, so I re-added PROBE_FORCE_SYNCHRONOUS to the platform driver, so groups are added only after the device has finished probing.

Using PROBE_FORCE_SYNCHRONOUS is not going to solve this problem here, please remove it.

Yes, I'm going for Ilpo's .dev_groups approach.

~ Kurt

Quoted 69 lines

Thanks,
Armin Wolf

Quoted 65 lines

I'm not 100% sure that the second commit message applies here, but it is revd-by Greg K-H so I added it just in case.

Aside from that, I added .pprof to awcc_quirks because I'm going to add support for new features after this series, and it makes sense that force_platform_profile only forces the pprof and not other upcoming features.

~ Kurt
---
[02/14]
- In alienware_alienfx_setup() add a devm action to remove the created platform device
- Drop device_remove_groups() in WMAX .remove callback
- Add PROBE_FORCE_SYNCHRONOUS to the platform driver
- Drop .remove callbacks on both WMI drivers

[03/14]
- Add awcc_platform_profile_init() to create the platform_profile

     device on quirks->thermal == true condition

[07/14]
- Add .pprof to awcc_quirks

[10/14]
- Drop unused member quirks on alienfx_priv (remnant of another version)

v6: https://lore.kernel.org/platform-driver-x86/[email protected]/

Kurt Borja (14):
platform/x86: alienware-wmi: Add a state container for LED control
feature
platform/x86: alienware-wmi: Add WMI Drivers
platform/x86: alienware-wmi: Add a state container for thermal control
methods
platform/x86: alienware-wmi: Refactor LED control methods platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methods platform/x86: alienware-wmi: Refactor thermal control methods platform/x86: alienware-wmi: Split DMI table
MAINTAINERS: Update ALIENWARE WMI DRIVER entry platform/x86: Rename alienware-wmi.c
platform/x86: Add alienware-wmi.h
platform/x86: Split the alienware-wmi driver
platform/x86: dell: Modify Makefile alignment platform/x86: Update alienware-wmi config entries platform/x86: alienware-wmi: Update header and module information

  MAINTAINERS                                   |    4 +-
  drivers/platform/x86/dell/Kconfig             |   30 +-
  drivers/platform/x86/dell/Makefile            |   45 +-
  .../platform/x86/dell/alienware-wmi-base.c    |  496 +++++++
  .../platform/x86/dell/alienware-wmi-legacy.c  |   95 ++
  .../platform/x86/dell/alienware-wmi-wmax.c    |  790 +++++++++++
  drivers/platform/x86/dell/alienware-wmi.c     | 1249 -----------------
  drivers/platform/x86/dell/alienware-wmi.h     |  101 ++
  8 files changed, 1534 insertions(+), 1276 deletions(-)

create mode 100644 drivers/platform/x86/dell/alienware-wmi-base.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-legacy.c create mode 100644 drivers/platform/x86/dell/alienware-wmi-wmax.c delete mode 100644 drivers/platform/x86/dell/alienware-wmi.c create mode 100644 drivers/platform/x86/dell/alienware-wmi.h

base-commit: 05dbaf8dd8bf537d4b4eb3115ab42a5fb40ff1f5