FAILED: patch "[PATCH] mptcp: pm: only set fullmesh for subflow endp" failed to apply to 6.1-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 1bb0d1348546ad059f55c93def34e67cb2a034a6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025020435-eagle-precision-e8dd@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1bb0d1348546ad059f55c93def34e67cb2a034a6 Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Thu, 23 Jan 2025 19:05:55 +0100
Subject: [PATCH] mptcp: pm: only set fullmesh for subflow endp
With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address.
Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before.
That's what syzbot found, triggering the following warning:
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK>
Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint.
Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR.
net/mptcp/pm_netlink.c +2 -1
@@ -2020,7 +2020,8 @@ int mptcp_pm_nl_set_flags(struct sk_buff *skb, struct genl_info *info)return -EINVAL ; }if ((addr.flags &MPTCP_PM_ADDR_FLAG_FULLMESH ) && - (entry->flags &MPTCP_PM_ADDR_FLAG_SIGNAL )) { + (entry->flags & (MPTCP_PM_ADDR_FLAG_SIGNAL | +MPTCP_PM_ADDR_FLAG_IMPLICIT ))) {spin_unlock_bh (&pernet->lock);GENL_SET_ERR_MSG (info,"invalid addr flags" );return -EINVAL ;
Matthieu Baerts (NGI0)
maintainercover mptcp: pm: only set fullmesh for subflow endp (and more)
The commit 1bb0d1348546 ("mptcp: pm: only set fullmesh for subflow endp") could not be backported to this kernel version without conflicts. Here is an updated version adapted for this kernel version.
While at it, I also added the backport of the commit 56b824eb49d6 ("mptcp: prevent excessive coalescing on receive") that we asked to delay. There were no conflicts.
Matthieu Baerts (NGI0) (1):
mptcp: pm: only set fullmesh for subflow endp
Paolo Abeni (1):
mptcp: prevent excessive coalescing on receive
net/mptcp/pm_netlink.c | 3 ++- net/mptcp/protocol.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)
Signature · 1 line
2.47.1
Matthieu Baerts (NGI0)
maintainerPATCH 1/2 mptcp: pm: only set fullmesh for subflow endp
In reply to [email protected]commit 1bb0d1348546ad059f55c93def34e67cb2a034a6 upstream.
With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address.
Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before.
That's what syzbot found, triggering the following warning:
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK>
Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint.
Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR.
[ Conflicts in pm_netlink.c, because the code has been moved around in
commit 6a42477fe449 ("mptcp: update set_flags interfaces"), but the same fix can still be applied at the original place. ]
--- net/mptcp/pm_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/mptcp/pm_netlink.c +2 -1
@@ -2086,7 +2086,8 @@ static int mptcp_nl_cmd_set_flags(struct sk_buff *skb, struct genl_info *info)return -EINVAL ; }if ((addr.flags &MPTCP_PM_ADDR_FLAG_FULLMESH ) && - (entry->flags &MPTCP_PM_ADDR_FLAG_SIGNAL )) { + (entry->flags & (MPTCP_PM_ADDR_FLAG_SIGNAL | +MPTCP_PM_ADDR_FLAG_IMPLICIT ))) {spin_unlock_bh (&pernet->lock);return -EINVAL ; }
Signature · 1 line
2.47.1
Matthieu Baerts (NGI0)
maintainerPATCH 2/2 mptcp: prevent excessive coalescing on receive
In reply to [email protected]From: Paolo Abeni <[email protected]>
commit 56b824eb49d6258aa0bad09a406ceac3f643cdae upstream.
Currently the skb size after coalescing is only limited by the skb layout (the skb must not carry frag_list). A single coalesced skb covering several MSS can potentially fill completely the receive buffer. In such a case, the snd win will zero until the receive buffer will be empty again, affecting tput badly.
--- net/mptcp/protocol.c | 1 + 1 file changed, 1 insertion(+)
net/mptcp/protocol.c +1 -0
@@ -149,6 +149,7 @@ static bool mptcp_try_coalesce(struct sock *sk, struct sk_buff *to,int delta;if (MPTCP_SKB_CB (from)->offset || + ((to->len + from->len) > (sk->sk_rcvbuf >>3 )) || !skb_try_coalesce (to, from, &fragstolen, &delta))return false;
Signature · 1 line
2.47.1
Patch "mptcp: pm: only set fullmesh for subflow endp" has been added to the 6.1-stable tree
In reply to Matthieu Baerts (NGI0)This is a note to let you know that I've just added the patch titled
mptcp: pm: only set fullmesh for subflow endp
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mptcp-pm-only-set-fullmesh-for-subflow-endp.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
From [email protected] Sun Feb 9 18:48:42 2025
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Sun, 9 Feb 2025 18:48:30 +0100
Subject: mptcp: pm: only set fullmesh for subflow endp
To: [email protected], [email protected], [email protected]
Cc: "Matthieu Baerts (NGI0)" <[email protected]>, [email protected], Mat Martineau <[email protected]>, Jakub Kicinski <[email protected]>
Message-ID: <[email protected]>
From: "Matthieu Baerts (NGI0)" <[email protected]>
commit 1bb0d1348546ad059f55c93def34e67cb2a034a6 upstream.
With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address.
Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before.
That's what syzbot found, triggering the following warning:
WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK>
Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint.
Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR.
[ Conflicts in pm_netlink.c, because the code has been moved around in
commit 6a42477fe449 ("mptcp: update set_flags interfaces"), but the same fix can still be applied at the original place. ]
--- net/mptcp/pm_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/mptcp/pm_netlink.c +2 -1
@@ -2086,7 +2086,8 @@ static int mptcp_nl_cmd_set_flags(structreturn -EINVAL ; }if ((addr.flags &MPTCP_PM_ADDR_FLAG_FULLMESH ) && - (entry->flags &MPTCP_PM_ADDR_FLAG_SIGNAL )) { + (entry->flags & (MPTCP_PM_ADDR_FLAG_SIGNAL | +MPTCP_PM_ADDR_FLAG_IMPLICIT ))) {spin_unlock_bh (&pernet->lock);return -EINVAL ; }
Patches currently in stable-queue which might be from [email protected] are
queue-6.1/mm-kmemleak-fix-upper-boundary-check-for-physical-address-objects.patch queue-6.1/mptcp-handle-fastopen-disconnect-correctly.patch queue-6.1/mptcp-prevent-excessive-coalescing-on-receive.patch queue-6.1/mptcp-consolidate-suboption-status.patch queue-6.1/selftests-mptcp-connect-f-no-reconnect.patch queue-6.1/mptcp-pm-only-set-fullmesh-for-subflow-endp.patch
Patch "mptcp: prevent excessive coalescing on receive" has been added to the 6.1-stable tree
In reply to Matthieu Baerts (NGI0)This is a note to let you know that I've just added the patch titled
mptcp: prevent excessive coalescing on receive
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mptcp-prevent-excessive-coalescing-on-receive.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
From [email protected] Sun Feb 9 18:48:49 2025
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Sun, 9 Feb 2025 18:48:31 +0100
Subject: mptcp: prevent excessive coalescing on receive
To: [email protected], [email protected], [email protected]
Cc: Paolo Abeni <[email protected]>, Mat Martineau <[email protected]>, "Matthieu Baerts (NGI0)" <[email protected]>, Jakub Kicinski <[email protected]>
Message-ID: <[email protected]>
From: Paolo Abeni <[email protected]>
commit 56b824eb49d6258aa0bad09a406ceac3f643cdae upstream.
Currently the skb size after coalescing is only limited by the skb layout (the skb must not carry frag_list). A single coalesced skb covering several MSS can potentially fill completely the receive buffer. In such a case, the snd win will zero until the receive buffer will be empty again, affecting tput badly.
--- net/mptcp/protocol.c | 1 + 1 file changed, 1 insertion(+)
net/mptcp/protocol.c +1 -0
@@ -149,6 +149,7 @@ static bool mptcp_try_coalesce(struct soint delta;if (MPTCP_SKB_CB (from)->offset || + ((to->len + from->len) > (sk->sk_rcvbuf >>3 )) || !skb_try_coalesce (to, from, &fragstolen, &delta))return false;
Patches currently in stable-queue which might be from [email protected] are
queue-6.1/mm-kmemleak-fix-upper-boundary-check-for-physical-address-objects.patch queue-6.1/mptcp-handle-fastopen-disconnect-correctly.patch queue-6.1/mptcp-prevent-excessive-coalescing-on-receive.patch queue-6.1/mptcp-consolidate-suboption-status.patch queue-6.1/selftests-mptcp-connect-f-no-reconnect.patch queue-6.1/mptcp-pm-only-set-fullmesh-for-subflow-endp.patch