Skip to contentSkip to conversation

crypto/mlx5: log when num of segs exceed max segs

PATCH In review Gregory Etelson 2 participants 2 messages Feb 9, 2025 – Feb 10, 2025 Crypto API

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 crypto/mlx5: log when num of segs exceed max segs

From: Shani Peretz <[email protected]>

This patch logs and aborts when mbuf segment count exceeding max_segs_num. The log message suggests the user to either increase the segment size or set a higher value for the max_segs_num devarg.

Fixes b01095830734 ("crypto/mlx5: add GCM enqueue/dequeue operations")
---
 drivers/crypto/mlx5/mlx5_crypto_gcm.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/crypto/mlx5/mlx5_crypto_gcm.c +9 -1
index 89f32c7722..d7156a6abc 100644
@@ -554,7 +554,15 @@ mlx5_crypto_gcm_build_mbuf_chain_klms(struct mlx5_crypto_qp *qp,
 	uint32_t klm_n = 0;
 
 	/* mbuf seg num should be less than max_segs_num. */
-	MLX5_ASSERT(nb_segs <= qp->priv->max_segs_num);
+	if (nb_segs > qp->priv->max_segs_num) {
+		DRV_LOG(WARNING, "Segment count exceeds limit. "
+				"Current segments: %d, Maximum allowed: %d. "
+				"To resolve, either increase the segment size "
+				"or set a higher value for the devargs max_segs_num parameter.",
+			nb_segs, qp->priv->max_segs_num);
+		RTE_VERIFY(nb_segs <= qp->priv->max_segs_num);
+		return 0;
+	}
 	/* First mbuf needs to take the data offset. */
 	if (unlikely(_mlx5_crypto_gcm_umr_build_mbuf_klm(qp, mbuf, klm,
 		     op->sym->aead.data.offset, &remain_len) == UINT32_MAX)) {
Signature · 1 line
2.45.2
#1 lore raw

drivers/crypto/mlx5/mlx5_crypto_gcm.c mlx5_crypto_gcm_build_mbuf_chain_klms(struct mlx5_crypto_qp *qp, · line 565

Quoted 10 lines · On Sun, 9 Feb 2025 14:08:51 +0200 Gregory Etelson <[email protected]> wrote:
drivers/crypto/mlx5/mlx5_crypto_gcm.c +9 -1
-	MLX5_ASSERT(nb_segs <= qp->priv->max_segs_num);
+	if (nb_segs > qp->priv->max_segs_num) {
+		DRV_LOG(WARNING, "Segment count exceeds limit. "
+				"Current segments: %d, Maximum allowed: %d. "
+				"To resolve, either increase the segment size "
+				"or set a higher value for the devargs max_segs_num parameter.",
+			nb_segs, qp->priv->max_segs_num);
+		RTE_VERIFY(nb_segs <= qp->priv->max_segs_num);
+		return 0;
+	}

Way to verbose.
RTE_VERIFY never returns since it calls rte_panic().

Would it be better to just use RTE_VERIFY()?
Maybe MLX5 should have MLX5_ASSERT() and MLX5_VERIFY() macro.

Je n’ai fait celle-ci plus longue que parce que je n’ai pas eu le loisir de la faire plus courte. I have made this longer than usual because I have not had time to make it shorter.