KVM: arm64: NV userspace ABI
Subsystems (4)
Marc Zyngier
maintainercover KVM: arm64: NV userspace ABI
Since the previous incarnation of the ABI was proved to be subtly wrong, I have reworked it to be more in line with the current way KVM operates.
No more late NV-specific adjustment nor writable ID_AA64MMFR0_EL1.VH. The NV configuration is now entirely selected from the vcpu flags. I've preserved the KVM_ARM_VCPU_EL2 flag which enables NV with VHE, and added KVM_ARM_VCPU_EL2_E2H0 which alters the NV behaviour to only allow nVHE guests without recursive NV support.
This series is actually very little new code. The bulk of it is converting the feature downgrade to be per-idreg, essentially going back to the state before 44241f34fac96 ("KVM: arm64: nv: Use accessors for modifying ID registers"), only slightly modernised. This then becomes part of the reset value computing.
The rest is simply what you'd expect in terms of being able to write the ID_AA64MMFR4_EL1.NV_frac field, making the correct bits RES0 when needed, probing for capabilities and handling the init flags.
Patches on top of -rc2, with the integration branch at the usual location.
Marc Zyngier (14):
arm64: cpufeature: Handle NV_frac as a synonym of NV2
KVM: arm64: Hide ID_AA64MMFR2_EL1.NV from guest and userspace
KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
KVM: arm64: Mark HCR.EL2.{NV*,AT} RES0 when ID_AA64MMFR4_EL1.NV_frac
is 0
KVM: arm64: Advertise NV2 in the boot messages
KVM: arm64: Consolidate idreg reset method
KVM: arm64: Make ID_REG_LIMIT_FIELD_ENUM() more widely available
KVM: arm64: Enforce NV limits on a per-idregs basis
KVM: arm64: Move NV-specific capping to idreg sanitisation
KVM: arm64: Allow userspace to limit NV support to nVHE
KVM: arm64: Make ID_AA64MMFR4_EL1.NV_frac writable
KVM: arm64: Advertise FEAT_ECV when possible
KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
KVM: arm64: Document NV caps and vcpu flags
Documentation/virt/kvm/api.rst | 14 +- arch/arm64/include/asm/kvm_host.h | 2 +- arch/arm64/include/asm/kvm_nested.h | 1 + arch/arm64/include/uapi/asm/kvm.h | 1 + arch/arm64/kernel/cpufeature.c | 15 +- arch/arm64/kvm/arm.c | 11 +- arch/arm64/kvm/nested.c | 285 +++++++++++++++------------- arch/arm64/kvm/sys_regs.c | 25 +-- arch/arm64/kvm/sys_regs.h | 10 + include/uapi/linux/kvm.h | 2 + 10 files changed, 209 insertions(+), 157 deletions(-)
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 1/14 arm64: cpufeature: Handle NV_frac as a synonym of NV2
With ARMv9.5, an implementation supporting Nested Virtualization is allowed to only support NV2, and to avoid supporting the old (and useless) ARMv8.3 variant.
This is indicated by ID_AA64MMFR2_EL1.NV being 0 (as if NV wasn't implemented) and ID_AA64MMDR4_EL1.NV_frac being 1 (indicating that NV2 is actually supported).
Given that KVM only deals with NV2 and refuses to use the old NV, detecting NV2 or NV_frac is what we need to enable it.
--- arch/arm64/kernel/cpufeature.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
arch/arm64/kernel/cpufeature.c +13 -2
@@ -497,6 +497,7 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr3[] = {static const struct arm64_ftr_bits ftr_id_aa64mmfr4[] = {S_ARM64_FTR_BITS (FTR_HIDDEN ,FTR_STRICT ,FTR_LOWER_SAFE ,ID_AA64MMFR4_EL1_E2H0_SHIFT ,4 ,0 ), +ARM64_FTR_BITS (FTR_HIDDEN ,FTR_STRICT ,FTR_LOWER_SAFE , ID_AA64MMFR4_EL1_NV_frac_SHIFT,4 ,0 ),ARM64_FTR_END , };
@@ -2162,7 +2163,7 @@ static bool has_nested_virt_support(const struct arm64_cpu_capabilities *cap,if (kvm_get_mode () !=KVM_MODE_NV )return false; -if (!has_cpuid_feature (cap, scope)) { +if (!cpucap_multi_entry_cap_matches (cap, scope)) {pr_warn ("unavailable: %s\n" , cap->desc);return false; }
@@ -2519,7 +2520,17 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_NESTED_VIRT, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_nested_virt_support, -ARM64_CPUID_FIELDS (ID_AA64MMFR2_EL1 ,NV ,NV2 ) + .match_list = (const struct arm64_cpu_capabilities []){ + { + .matches = has_cpuid_feature, +ARM64_CPUID_FIELDS (ID_AA64MMFR2_EL1 ,NV ,NV2 ) + }, + { + .matches = has_cpuid_feature, +ARM64_CPUID_FIELDS (ID_AA64MMFR4_EL1 , NV_frac,NV2_ONLY ) + }, + {/* Sentinel */ } + }, }, { .capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
Signature · 1 line
2.39.2
Re: [PATCH 01/14] arm64: cpufeature: Handle NV_frac as a synonym of NV2
Quoted 6 lines · Marc Zyngier
With ARMv9.5, an implementation supporting Nested Virtualization is allowed to only support NV2, and to avoid supporting the old (and useless) ARMv8.3 variant.
This is indicated by ID_AA64MMFR2_EL1.NV being 0 (as if NV wasn't implemented) and ID_AA64MMDR4_EL1.NV_frac being 1 (indicating that
^ F
The register name is wrong there.
Quoted 2 lines
NV2 is actually supported).
-aneesh
Marc Zyngier
maintainerRe: [PATCH 01/14] arm64: cpufeature: Handle NV_frac as a synonym of NV2
Quoted 11 lines · Aneesh Kumar K.V
Quoted 6 lines · Marc Zyngier
With ARMv9.5, an implementation supporting Nested Virtualization is allowed to only support NV2, and to avoid supporting the old (and useless) ARMv8.3 variant.
This is indicated by ID_AA64MMFR2_EL1.NV being 0 (as if NV wasn't implemented) and ID_AA64MMDR4_EL1.NV_frac being 1 (indicating that
^ FThe register name is wrong there.
Already reported by Joey on v2 of this series.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Marc Zyngier
maintainerPATCH 2/14 KVM: arm64: Hide ID_AA64MMFR2_EL1.NV from guest and userspace
In reply to Marc ZyngierSince our take on FEAT_NV is to only support FEAT_NV2, we should never expose ID_AA64MMFR2_EL1.NV to a guest nor userspace.
Make sure we mask this field for good.
--- arch/arm64/kvm/sys_regs.c | 1 + 1 file changed, 1 insertion(+)
arch/arm64/kvm/sys_regs.c +1 -0
@@ -1627,6 +1627,7 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,break ;case SYS_ID_AA64MMFR2_EL1 : val &= ~ID_AA64MMFR2_EL1_CCIDX_MASK ; + val &= ~ID_AA64MMFR2_EL1_NV ;break ;case SYS_ID_AA64MMFR3_EL1 : val &= ID_AA64MMFR3_EL1_TCRX | ID_AA64MMFR3_EL1_S1POE |
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 3/14 KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
In reply to Marc ZyngierEnforce HCR_EL2.E2H being RES0 when VHE is disabled, so that we can actually rely on that bit never being flipped behind our back.
--- arch/arm64/kvm/nested.c | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/kvm/nested.c +2 -0
@@ -1034,6 +1034,8 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) res0 |= (HCR_TEA |HCR_TERR );if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,LO ,IMP )) res0 |=HCR_TLOR ; +if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,VH ,IMP )) + res0 |=HCR_E2H ;if (!kvm_has_feat (kvm,ID_AA64MMFR4_EL1 ,E2H0 ,IMP )) res1 |=HCR_E2H ;set_sysreg_masks (kvm,HCR_EL2 , res0, res1);
Signature · 1 line
2.39.2
Re: [PATCH 03/14] KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
Quoted 13 lines · Marc Zyngier
Enforce HCR_EL2.E2H being RES0 when VHE is disabled, so that we can actually rely on that bit never being flipped behind our back.
Signed-off-by Marc Zyngier <[email protected]>--- arch/arm64/kvm/nested.c | 2 ++ 1 file changed, 2 insertions(+)arch/arm64/kvm/nested.c +0
-0
arch/arm64/kvm/nested.c int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) · line 1041
Quoted 8 lines
arch/arm64/kvm/nested.c +2
-0@@ -1034,6 +1034,8 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) res0 |= (HCR_TEA |HCR_TERR );if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,LO ,IMP )) res0 |=HCR_TLOR ; +if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,VH ,IMP )) + res0 |=HCR_E2H ;if (!kvm_has_feat (kvm,ID_AA64MMFR4_EL1 ,E2H0 ,IMP )) res1 |=HCR_E2H ;
Does it make sense to check for E2H0 if MMFR1_EL1.VH == 0 ? Should the above check be
if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP)) res0 |= HCR_E2H; else if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, E2H0, IMP))
res1 |= HCR_E2H;
Quoted 3 lines
set_sysreg_masks(kvm, HCR_EL2, res0, res1);
--
2.39.2
Marc Zyngier
maintainerRe: [PATCH 03/14] KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
Quoted 27 lines · Aneesh Kumar K.V
Quoted 13 lines · Marc Zyngier
Enforce HCR_EL2.E2H being RES0 when VHE is disabled, so that we can actually rely on that bit never being flipped behind our back.
Signed-off-by Marc Zyngier <[email protected]>--- arch/arm64/kvm/nested.c | 2 ++ 1 file changed, 2 insertions(+)arch/arm64/kvm/nested.c +0
-0arch/arm64/kvm/nested.c int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) · line 1041
Quoted 8 lines
arch/arm64/kvm/nested.c +2
-0@@ -1034,6 +1034,8 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) res0 |= (HCR_TEA |HCR_TERR );if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,LO ,IMP )) res0 |=HCR_TLOR ; +if (!kvm_has_feat (kvm,ID_AA64MMFR1_EL1 ,VH ,IMP )) + res0 |=HCR_E2H ;if (!kvm_has_feat (kvm,ID_AA64MMFR4_EL1 ,E2H0 ,IMP )) res1 |=HCR_E2H ;Does it make sense to check for E2H0 if MMFR1_EL1.VH == 0 ? Should the above check be
Quoted 4 lines
if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP)) res0 |= HCR_E2H; else if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, E2H0, IMP))res1 |=
HCR_E2H;
What difference does it make? This bit can only have a reserved value, and can never be actively modified. If you *really* wanted to optimise this for reasons that I really cannot fathom, you could have this:
if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP))
res0 |= HCR_E2H;
else
res1 |= HCR_E2H;
because that's what we really implement.
Does it matter? I don't think so. If anything, I'd rather we keep the code as is and have a run-time warning if a bit is simultaneously RES0 and RES1, because that'd be indicative of a much bigger problem.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Marc Zyngier
maintainerPATCH 4/14 KVM: arm64: Mark HCR.EL2.{NV*,AT} RES0 when ID_AA64MMFR4_EL1.NV_frac is 0
In reply to Marc ZyngierEnforce HCR_EL2.{NV*,AT} being RES0 when NV2 is disabled, so that we can actually rely on these bits never being flipped behind our back.
This of course relies on our earlier ID reg sanitising.
--- arch/arm64/kvm/nested.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
arch/arm64/kvm/nested.c +5 -4
@@ -1021,10 +1021,11 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu) res0 |=HCR_FIEN ;if (!kvm_has_feat (kvm,ID_AA64MMFR2_EL1 ,FWB ,IMP )) res0 |=HCR_FWB ; -if (!kvm_has_feat (kvm,ID_AA64MMFR2_EL1 ,NV ,NV2 )) - res0 |=HCR_NV2 ; -if (!kvm_has_feat (kvm,ID_AA64MMFR2_EL1 ,NV ,IMP )) - res0 |= (HCR_AT |HCR_NV1 |HCR_NV ); +/* Implementation choice: NV2 is the only supported config */ +if (!kvm_has_feat (kvm,ID_AA64MMFR4_EL1 , NV_frac,NV2_ONLY )) + res0 |= (HCR_NV2 |HCR_NV |HCR_AT ); +if (!kvm_has_feat (kvm,ID_AA64MMFR4_EL1 ,E2H0 ,NI )) + res0 |=HCR_NV1 ;if (!(kvm_vcpu_has_feature (kvm,KVM_ARM_VCPU_PTRAUTH_ADDRESS ) &&kvm_vcpu_has_feature (kvm,KVM_ARM_VCPU_PTRAUTH_GENERIC ))) res0 |= (HCR_API |HCR_APK );
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 5/14 KVM: arm64: Advertise NV2 in the boot messages
In reply to Marc ZyngierMake it a bit easier to understand what people are running by adding a +NV2 string to the successful KVM initialisation.
--- arch/arm64/kvm/arm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm64/kvm/arm.c +3 -2
@@ -2814,11 +2814,12 @@ static __init int kvm_arm_init(void)if (err) goto out_hyp; -kvm_info ("%s%sVHE mode initialized successfully\n" , +kvm_info ("%s%sVHE%s mode initialized successfully\n" , in_hyp_mode ?"" : (is_protected_kvm_enabled () ?"Protected " :"Hyp " ), in_hyp_mode ?"" : (cpus_have_final_cap (ARM64_KVM_HVHE ) ? -"h" :"n" )); +"h" :"n" ), +cpus_have_final_cap (ARM64_HAS_NESTED_VIRT ) ?"+NV2" :"" );/* * FIXME: Do something reasonable if kvm_init() fails after pKVM
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 6/14 KVM: arm64: Consolidate idreg reset method
In reply to Marc ZyngierSince all the ID_DESC() users are using kvm_read_sanitised_id_reg() as the .reset method, consolidate all the uses into that particular macro.
--- arch/arm64/kvm/sys_regs.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
arch/arm64/kvm/sys_regs.c +2 -7
@@ -2270,14 +2270,14 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,#define ID_DESC (name) \ SYS_DESC(SYS_##name), \ .access = access_id_reg, \ - .get_user = get_id_reg \ + .get_user = get_id_reg, \ + .reset = kvm_read_sanitised_id_reg/* sys_reg_desc initialiser for known cpufeature ID registers */ #define ID_SANITISED (name) { \ ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = id_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = 0, \ }
@@ -2286,7 +2286,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu, ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = aa32_id_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = 0, \ }
@@ -2295,7 +2294,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu, ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = id_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = mask, \ }
@@ -2304,7 +2302,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu, ID_DESC(sysreg), \ .set_user = set_##name, \ .visibility = id_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = (mask), \ }
@@ -2319,7 +2316,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu, .get_user = get_id_reg, \ .set_user = set_id_reg, \ .visibility = raz_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = 0, \ }
@@ -2332,7 +2328,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu, ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = raz_visibility, \ - .reset = kvm_read_sanitised_id_reg, \ .val = 0, \ }
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 7/14 KVM: arm64: Make ID_REG_LIMIT_FIELD_ENUM() more widely available
In reply to Marc ZyngierID_REG_LIMIT_FIELD_ENUM() is a useful macro to limit the idreg features exposed to guest and userspace, and the NV code can make use of it.
--- arch/arm64/kvm/sys_regs.c | 10 ---------- arch/arm64/kvm/sys_regs.h | 10 ++++++++++ 2 files changed, 10 insertions(+), 10 deletions(-)
arch/arm64/kvm/sys_regs.c +0 -10
@@ -1803,16 +1803,6 @@ static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val)return val; } -#define ID_REG_LIMIT_FIELD_ENUM (val, reg, field, limit) \ -({ \ - u64 __f_val = FIELD_GET(reg##_##field##_MASK, val); \ - (val) &= ~reg##_##field##_MASK; \ - (val) |= FIELD_PREP(reg##_##field##_MASK, \ - min(__f_val, \ - (u64)SYS_FIELD_VALUE(reg, field, limit))); \ - (val); \ -}) -static u64 sanitise_id_aa64dfr0_el1 (const struct kvm_vcpu *vcpu,u64 val) { val =ID_REG_LIMIT_FIELD_ENUM (val,ID_AA64DFR0_EL1 , DebugVer,V8P8 );
arch/arm64/kvm/sys_regs.h +10 -0
@@ -247,4 +247,14 @@ int kvm_finalize_sys_regs(struct kvm_vcpu *vcpu);CRn (sys_reg_CRn (reg)),CRm (sys_reg_CRm (reg)), \ Op2(sys_reg_Op2(reg)) +#define ID_REG_LIMIT_FIELD_ENUM (val, reg, field, limit) \ +({ \ + u64 __f_val = FIELD_GET(reg##_##field##_MASK, val); \ + (val) &= ~reg##_##field##_MASK; \ + (val) |= FIELD_PREP(reg##_##field##_MASK, \ + min(__f_val, \ + (u64)SYS_FIELD_VALUE(reg, field, limit))); \ + (val); \ +}) +#endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 8/14 KVM: arm64: Enforce NV limits on a per-idregs basis
In reply to Marc ZyngierAs we are about to change the way the idreg reset values are computed, move all the NV limits into a function that initialises one register at a time.
This will be most useful in the upcoming patches. We take this opportunity to remove the NV_FTR() macro and rely on the generated names instead.
--- arch/arm64/kvm/nested.c | 239 +++++++++++++++++++++++----------------- 1 file changed, 136 insertions(+), 103 deletions(-)
arch/arm64/kvm/nested.c +136 -103
@@ -16,9 +16,6 @@#include "sys_regs.h" -/* Protection against the sysreg repainting madness... */ -#define NV_FTR (r, f) ID_AA64##r##_EL1_##f -/* * Ratio of live shadow S2 MMU per vcpu. This is a trade-off between * memory usage and potential number of different sets of S2 PTs in
@@ -807,133 +804,169 @@ void kvm_arch_flush_shadow_all(struct kvm *kvm)* This list should get updated as new features get added to the NV * support, and new extension to the architecture. */ +static u64 limit_nv_id_reg (struct kvm *kvm,u32 reg,u64 val) +{ +switch (reg) { +case SYS_ID_AA64ISAR0_EL1 : +/* Support everything but TME */ + val &= ~ID_AA64ISAR0_EL1_TME ; +break ; + +case SYS_ID_AA64ISAR1_EL1 : +/* Support everything but LS64 and Spec Invalidation */ + val &= ~(ID_AA64ISAR1_EL1_LS64 | +ID_AA64ISAR1_EL1_SPECRES ); +break ; + +case SYS_ID_AA64PFR0_EL1 : +/* No RME, AMU, MPAM, S-EL2, or RAS */ + val &= ~(ID_AA64PFR0_EL1_RME | +ID_AA64PFR0_EL1_AMU | +ID_AA64PFR0_EL1_MPAM | +ID_AA64PFR0_EL1_SEL2 | +ID_AA64PFR0_EL1_RAS | +ID_AA64PFR0_EL1_EL3 | +ID_AA64PFR0_EL1_EL2 | +ID_AA64PFR0_EL1_EL1 | +ID_AA64PFR0_EL1_EL0 ); +/* 64bit only at any EL */ + val |=SYS_FIELD_PREP_ENUM (ID_AA64PFR0_EL1 ,EL0 ,IMP ); + val |=SYS_FIELD_PREP_ENUM (ID_AA64PFR0_EL1 ,EL1 ,IMP ); + val |=SYS_FIELD_PREP_ENUM (ID_AA64PFR0_EL1 ,EL2 ,IMP ); + val |=SYS_FIELD_PREP_ENUM (ID_AA64PFR0_EL1 ,EL3 ,IMP ); +break ; + +case SYS_ID_AA64PFR1_EL1 : +/* Only support BTI, SSBS, CSV2_frac */ + val &= (ID_AA64PFR1_EL1_BT | +ID_AA64PFR1_EL1_SSBS | + ID_AA64PFR1_EL1_CSV2_frac); +break ; + +case SYS_ID_AA64MMFR0_EL1 : +/* Hide ECV, ExS, Secure Memory */ + val &= ~(ID_AA64MMFR0_EL1_EVC | +ID_AA64MMFR0_EL1_EXS | +ID_AA64MMFR0_EL1_TGRAN4_2 | +ID_AA64MMFR0_EL1_TGRAN16_2 | +ID_AA64MMFR0_EL1_TGRAN64_2 | +ID_AA64MMFR0_EL1_SNSMEM ); + +/* Disallow unsupported S2 page sizes */ +switch (PAGE_SIZE ) { +case SZ_64K : + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR0_EL1 ,TGRAN16_2 ,NI ); + fallthrough; +case SZ_16K : + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR0_EL1 ,TGRAN4_2 ,NI ); + fallthrough; +case SZ_4K : +/* Support everything */ +break ; + } + +/* +* Since we can't support a guest S2 page size smaller +* than the host's own page size (due to KVM only +* populating its own S2 using the kernel's page +* size), advertise the limitation using FEAT_GTG. +*/ +switch (PAGE_SIZE ) { +case SZ_4K : + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR0_EL1 ,TGRAN4_2 ,IMP ); + fallthrough; +case SZ_16K : + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR0_EL1 ,TGRAN16_2 ,IMP ); + fallthrough; +case SZ_64K : + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR0_EL1 ,TGRAN64_2 ,IMP ); +break ; + } + +/* Cap PARange to 48bits */ + val =ID_REG_LIMIT_FIELD_ENUM (val,ID_AA64MMFR0_EL1 ,PARANGE ,48 ); +break ; + +case SYS_ID_AA64MMFR1_EL1 : + val &= (ID_AA64MMFR1_EL1_HCX | +ID_AA64MMFR1_EL1_PAN | +ID_AA64MMFR1_EL1_LO | +ID_AA64MMFR1_EL1_HPDS | +ID_AA64MMFR1_EL1_VH | + ID_AA64MMFR1_EL1_VMIDBits); +break ; + +case SYS_ID_AA64MMFR2_EL1 : + val &= ~(ID_AA64MMFR2_EL1_BBM | +ID_AA64MMFR2_EL1_TTL | +GENMASK_ULL (47 ,44 ) | +ID_AA64MMFR2_EL1_ST | +ID_AA64MMFR2_EL1_CCIDX | + ID_AA64MMFR2_EL1_VARange); + +/* Force TTL support */ + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR2_EL1 ,TTL ,IMP ); +break ; + +case SYS_ID_AA64MMFR4_EL1 : + val =SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 , NV_frac,NV2_ONLY ); + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 ,E2H0 ,NI_NV1 ); +break ; + +case SYS_ID_AA64DFR0_EL1 : +/* Only limited support for PMU, Debug, BPs, WPs, and HPMN0 */ + val &= (ID_AA64DFR0_EL1_PMUVer | + ID_AA64DFR0_EL1_WRPs | + ID_AA64DFR0_EL1_BRPs | + ID_AA64DFR0_EL1_DebugVer| +ID_AA64DFR0_EL1_HPMN0 ); + +/* Cap Debug to ARMv8.1 */ + val =ID_REG_LIMIT_FIELD_ENUM (val,ID_AA64DFR0_EL1 , DebugVer,VHE ); +break ; + } + +return val; +} +static void limit_nv_id_regs (struct kvm *kvm) { -u64 val, tmp; +u64 val; -/* Support everything but TME */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64ISAR0_EL1 ); - val &= ~NV_FTR (ISAR0 ,TME ); + val =limit_nv_id_reg (kvm,SYS_ID_AA64ISAR0_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64ISAR0_EL1 , val); -/* Support everything but Spec Invalidation and LS64 */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64ISAR1_EL1 ); - val &= ~(NV_FTR (ISAR1 ,LS64 ) | -NV_FTR (ISAR1 ,SPECRES )); + val =limit_nv_id_reg (kvm,SYS_ID_AA64ISAR1_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64ISAR1_EL1 , val); -/* No AMU, MPAM, S-EL2, or RAS */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64PFR0_EL1 ); - val &= ~(GENMASK_ULL (55 ,52 ) | -NV_FTR (PFR0 ,AMU ) | -NV_FTR (PFR0 ,MPAM ) | -NV_FTR (PFR0 ,SEL2 ) | -NV_FTR (PFR0 ,RAS ) | -NV_FTR (PFR0 ,EL3 ) | -NV_FTR (PFR0 ,EL2 ) | -NV_FTR (PFR0 ,EL1 ) | -NV_FTR (PFR0 ,EL0 )); -/* 64bit only at any EL */ - val |=FIELD_PREP (NV_FTR (PFR0 ,EL0 ),0b0001 ); - val |=FIELD_PREP (NV_FTR (PFR0 ,EL1 ),0b0001 ); - val |=FIELD_PREP (NV_FTR (PFR0 ,EL2 ),0b0001 ); - val |=FIELD_PREP (NV_FTR (PFR0 ,EL3 ),0b0001 ); + val =limit_nv_id_reg (kvm,SYS_ID_AA64PFR0_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64PFR0_EL1 , val); -/* Only support BTI, SSBS, CSV2_frac */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64PFR1_EL1 ); - val &= (NV_FTR (PFR1 ,BT ) | -NV_FTR (PFR1 ,SSBS ) | -NV_FTR (PFR1 , CSV2_frac)); + val =limit_nv_id_reg (kvm,SYS_ID_AA64PFR1_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64PFR1_EL1 , val); -/* Hide ECV, ExS, Secure Memory */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64MMFR0_EL1 ); - val &= ~(NV_FTR (MMFR0 ,ECV ) | -NV_FTR (MMFR0 ,EXS ) | -NV_FTR (MMFR0 ,TGRAN4_2 ) | -NV_FTR (MMFR0 ,TGRAN16_2 ) | -NV_FTR (MMFR0 ,TGRAN64_2 ) | -NV_FTR (MMFR0 ,SNSMEM )); - -/* Disallow unsupported S2 page sizes */ -switch (PAGE_SIZE ) { -case SZ_64K : - val |=FIELD_PREP (NV_FTR (MMFR0 ,TGRAN16_2 ),0b0001 ); - fallthrough; -case SZ_16K : - val |=FIELD_PREP (NV_FTR (MMFR0 ,TGRAN4_2 ),0b0001 ); - fallthrough; -case SZ_4K : -/* Support everything */ -break ; - } -/* -* Since we can't support a guest S2 page size smaller than -* the host's own page size (due to KVM only populating its -* own S2 using the kernel's page size), advertise the -* limitation using FEAT_GTG. -*/ -switch (PAGE_SIZE ) { -case SZ_4K : - val |=FIELD_PREP (NV_FTR (MMFR0 ,TGRAN4_2 ),0b0010 ); - fallthrough; -case SZ_16K : - val |=FIELD_PREP (NV_FTR (MMFR0 ,TGRAN16_2 ),0b0010 ); - fallthrough; -case SZ_64K : - val |=FIELD_PREP (NV_FTR (MMFR0 ,TGRAN64_2 ),0b0010 ); -break ; - } -/* Cap PARange to 48bits */ - tmp =FIELD_GET (NV_FTR (MMFR0 ,PARANGE ), val); -if (tmp >0b0101 ) { - val &= ~NV_FTR (MMFR0 ,PARANGE ); - val |=FIELD_PREP (NV_FTR (MMFR0 ,PARANGE ),0b0101 ); - } + val =limit_nv_id_reg (kvm,SYS_ID_AA64MMFR0_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64MMFR0_EL1 , val); val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64MMFR1_EL1 ); - val &= (NV_FTR (MMFR1 ,HCX ) | -NV_FTR (MMFR1 ,PAN ) | -NV_FTR (MMFR1 ,LO ) | -NV_FTR (MMFR1 ,HPDS ) | -NV_FTR (MMFR1 ,VH ) | -NV_FTR (MMFR1 , VMIDBits)); + val =limit_nv_id_reg (kvm,SYS_ID_AA64MMFR1_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64MMFR1_EL1 , val); val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64MMFR2_EL1 ); - val &= ~(NV_FTR (MMFR2 ,BBM ) | -NV_FTR (MMFR2 ,TTL ) | -GENMASK_ULL (47 ,44 ) | -NV_FTR (MMFR2 ,ST ) | -NV_FTR (MMFR2 ,CCIDX ) | -NV_FTR (MMFR2 , VARange)); - -/* Force TTL support */ - val |=FIELD_PREP (NV_FTR (MMFR2 ,TTL ),0b0001 ); + val =limit_nv_id_reg (kvm,SYS_ID_AA64MMFR2_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64MMFR2_EL1 , val); - val =0 ; -if (!cpus_have_final_cap (ARM64_HAS_HCR_NV1 )) - val |=FIELD_PREP (NV_FTR (MMFR4 ,E2H0 ), -ID_AA64MMFR4_EL1_E2H0_NI_NV1 ); + val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64MMFR4_EL1 ); + val =limit_nv_id_reg (kvm,SYS_ID_AA64MMFR4_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64MMFR4_EL1 , val); -/* Only limited support for PMU, Debug, BPs, WPs, and HPMN0 */ val =kvm_read_vm_id_reg (kvm,SYS_ID_AA64DFR0_EL1 ); - val &= (NV_FTR (DFR0 , PMUVer) | -NV_FTR (DFR0 , WRPs) | -NV_FTR (DFR0 , BRPs) | -NV_FTR (DFR0 , DebugVer) | -NV_FTR (DFR0 ,HPMN0 )); - -/* Cap Debug to ARMv8.1 */ - tmp =FIELD_GET (NV_FTR (DFR0 , DebugVer), val); -if (tmp >0b0111 ) { - val &= ~NV_FTR (DFR0 , DebugVer); - val |=FIELD_PREP (NV_FTR (DFR0 , DebugVer),0b0111 ); - } + val =limit_nv_id_reg (kvm,SYS_ID_AA64DFR0_EL1 , val);kvm_set_vm_id_reg (kvm,SYS_ID_AA64DFR0_EL1 , val); }
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 9/14 KVM: arm64: Move NV-specific capping to idreg sanitisation
In reply to Marc ZyngierInstead of applying the NV idreg limits at run time, switch to doing it at the same time as the reset of the VM initialisation.
This will make things much simpler once we introduce vcpu-driven variants of NV.
--- arch/arm64/include/asm/kvm_nested.h | 1 + arch/arm64/kvm/nested.c | 45 +---------------------------- arch/arm64/kvm/sys_regs.c | 3 ++ 3 files changed, 5 insertions(+), 44 deletions(-)
arch/arm64/include/asm/kvm_nested.h +1 -0
@@ -188,6 +188,7 @@ static inline bool kvm_supported_tlbi_s1e2_op(struct kvm_vcpu *vpcu, u32 instr) }int kvm_init_nv_sysregs (struct kvm_vcpu *vcpu); +u64 limit_nv_id_reg (struct kvm *kvm,u32 reg,u64 val);#ifdef CONFIG_ARM64_PTR_AUTH bool kvm_auth_eretax (struct kvm_vcpu *vcpu,u64 *elr);
arch/arm64/kvm/nested.c +1 -44
63 lines not on this page · raw message
arch/arm64/kvm/sys_regs.c +3 -0
@@ -1638,6 +1638,9 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,break ; } +if (vcpu_has_nv (vcpu)) + val =limit_nv_id_reg (vcpu->kvm, id, val); +return val; }
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 10/14 KVM: arm64: Allow userspace to limit NV support to nVHE
In reply to Marc ZyngierNV is hard. No kidding.
In order to make things simpler, we have established that NV would support two mutually exclusive configurations:
- VHE-only, and supporting recursive virtualisation
- mVHE-only, and not supporting recursive virtualisation
For that purpose, introduce a new vcpu feature flag that denotes the second configuration. We use this flag to limit the idregs further.
--- arch/arm64/include/uapi/asm/kvm.h | 1 + arch/arm64/kvm/nested.c | 28 ++++++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 2 deletions(-)
arch/arm64/include/uapi/asm/kvm.h +1 -0
@@ -105,6 +105,7 @@ struct kvm_regs {#define KVM_ARM_VCPU_PTRAUTH_ADDRESS 5/* VCPU uses address authentication */ #define KVM_ARM_VCPU_PTRAUTH_GENERIC 6/* VCPU uses generic authentication */ #define KVM_ARM_VCPU_HAS_EL2 7/* Support nested virtualization */ +#define KVM_ARM_VCPU_HAS_EL2_E2H0 8/* Limit NV support to E2H RES0 */ struct kvm_vcpu_init {__u32 target;
arch/arm64/kvm/nested.c +26 -2
@@ -51,6 +51,10 @@ int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu)struct kvm_s2_mmu *tmp;int num_mmus, ret =0 ; +if (test_bit (KVM_ARM_VCPU_HAS_EL2_E2H0 , kvm->arch.vcpu_features) && + !cpus_have_final_cap (ARM64_HAS_HCR_NV1 )) +return -EINVAL ; +/* * Let's treat memory allocation failures as benign: If we fail to * allocate anything, return an error and keep the allocated array
@@ -894,6 +898,9 @@ u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)ID_AA64MMFR1_EL1_HPDS |ID_AA64MMFR1_EL1_VH | ID_AA64MMFR1_EL1_VMIDBits); +/* FEAT_E2H0 implies no VHE */ +if (test_bit (KVM_ARM_VCPU_HAS_EL2_E2H0 , kvm->arch.vcpu_features)) + val &= ~ID_AA64MMFR1_EL1_VH ;break ;case SYS_ID_AA64MMFR2_EL1 :
@@ -909,8 +916,25 @@ u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)break ;case SYS_ID_AA64MMFR4_EL1 : - val =SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 , NV_frac,NV2_ONLY ); - val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 ,E2H0 ,NI_NV1 ); +/* +* You get EITHER +* +* - FEAT_VHE without FEAT_E2H0 +* - FEAT_NV limited to FEAT_NV2 +* - HCR_EL2.NV1 being RES0 +* +* OR +* +* - FEAT_E2H0 without FEAT_VHE nor FEAT_NV +* +* Life is too short for anything else. +*/ +if (test_bit (KVM_ARM_VCPU_HAS_EL2_E2H0 , kvm->arch.vcpu_features)) { + val =0 ; + }else { + val =SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 , NV_frac,NV2_ONLY ); + val |=SYS_FIELD_PREP_ENUM (ID_AA64MMFR4_EL1 ,E2H0 ,NI_NV1 ); + }break ;case SYS_ID_AA64DFR0_EL1 :
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 11/14 KVM: arm64: Make ID_AA64MMFR4_EL1.NV_frac writable
In reply to Marc ZyngierWe want to make sure that it is possible for userspace to configure whether recursive NV is possible. Make NV_frac writable for that purpose.
--- arch/arm64/kvm/sys_regs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kvm/sys_regs.c +1 -1
@@ -2669,7 +2669,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {ID_WRITABLE (ID_AA64MMFR3_EL1 , (ID_AA64MMFR3_EL1_TCRX |ID_AA64MMFR3_EL1_S1PIE |ID_AA64MMFR3_EL1_S1POE )), -ID_SANITISED (ID_AA64MMFR4_EL1 ), +ID_WRITABLE (ID_AA64MMFR4_EL1 , ID_AA64MMFR4_EL1_NV_frac),ID_UNALLOCATED (7 ,5 ),ID_UNALLOCATED (7 ,6 ), ID_UNALLOCATED(7,7),
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 12/14 KVM: arm64: Advertise FEAT_ECV when possible
In reply to Marc ZyngierWe can advertise support for FEAT_ECV if supported on the HW as long as we limit it to the basic trap bits, and not advertise CNTPOFF_EL2 support, even if the host has it (the short story being that CNTPOFF_EL2 is not virtualisable).
--- arch/arm64/kvm/nested.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch/arm64/kvm/nested.c +5 -3
@@ -848,14 +848,16 @@ u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)break ;case SYS_ID_AA64MMFR0_EL1 : -/* Hide ECV, ExS, Secure Memory */ - val &= ~(ID_AA64MMFR0_EL1_EVC | -ID_AA64MMFR0_EL1_EXS | +/* Hide ExS, Secure Memory */ + val &= ~(ID_AA64MMFR0_EL1_EXS |ID_AA64MMFR0_EL1_TGRAN4_2 |ID_AA64MMFR0_EL1_TGRAN16_2 |ID_AA64MMFR0_EL1_TGRAN64_2 |ID_AA64MMFR0_EL1_SNSMEM ); +/* Hide CNTPOFF if present */ + val =ID_REG_LIMIT_FIELD_ENUM (val,ID_AA64MMFR0_EL1 ,ECV ,IMP ); +/* Disallow unsupported S2 page sizes */ switch (PAGE_SIZE ) {case SZ_64K :
Signature · 1 line
2.39.2
Marc Zyngier
maintainerPATCH 13/14 KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
In reply to Marc ZyngierSince we're (almost) feature complete, let's allow userspace to request KVM_ARM_VCPU_EL2* by bumping KVM_VCPU_MAX_FEATURES up.
We also now advertise the features to userspace with a new capabilities.
It's going to be great...
--- arch/arm64/include/asm/kvm_host.h | 2 +- arch/arm64/kvm/arm.c | 6 ++++++ include/uapi/linux/kvm.h | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-)
arch/arm64/include/asm/kvm_host.h +1 -1
@@ -39,7 +39,7 @@#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS -#define KVM_VCPU_MAX_FEATURES 7 +#define KVM_VCPU_MAX_FEATURES 9#define KVM_VCPU_VALID_FEATURES (BIT(KVM_VCPU_MAX_FEATURES) - 1)#define KVM_REQ_SLEEP \
arch/arm64/kvm/arm.c +6 -0
@@ -359,6 +359,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_ARM_EL1_32BIT : r =cpus_have_final_cap (ARM64_HAS_32BIT_EL1 );break ; +case KVM_CAP_ARM_EL2 : + r =cpus_have_final_cap (ARM64_HAS_NESTED_VIRT ); +break ; +case KVM_CAP_ARM_EL2_E2H0 : + r =cpus_have_final_cap (ARM64_HAS_HCR_NV1 ); +break ;case KVM_CAP_GUEST_DEBUG_HW_BPS : r =get_num_brps ();break ;
include/uapi/linux/kvm.h +2 -0
@@ -929,6 +929,8 @@ struct kvm_enable_cap {#define KVM_CAP_PRE_FAULT_MEMORY 236#define KVM_CAP_X86_APIC_BUS_CYCLES_NS 237#define KVM_CAP_X86_GUEST_MODE 238 +#define KVM_CAP_ARM_EL2 239 +#define KVM_CAP_ARM_EL2_E2H0 240struct kvm_irq_routing_irqchip {__u32 irqchip;
Signature · 1 line
2.39.2
Re: [PATCH 13/14] KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
Quoted 8 lines · Marc Zyngier
Since we're (almost) feature complete, let's allow userspace to request KVM_ARM_VCPU_EL2* by bumping
KVM_VCPU_MAX_FEATURESup.We also now advertise the features to userspace with a new capabilities.
It's going to be great...
Signed-off-by Marc Zyngier <[email protected]>
Thanks,
Oliver
Marc Zyngier
maintainerPATCH 14/14 KVM: arm64: Document NV caps and vcpu flags
In reply to Marc ZyngierDescribe the two new vcpu flags that control NV, together with the capabilities that advertise them.
--- Documentation/virt/kvm/api.rst | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
Documentation/virt/kvm/api.rst +13 -1
@@ -3456,7 +3456,8 @@ The initial values are defined as: - FPSIMD/NEON registers: set to 0 - SVE registers: set to 0 - System registers: Reset to their architecturally defined - values as for a warm reset to EL1 (resp. SVC) + values as for a warm reset to EL1 (resp. SVC) or EL2 (in the + case of EL2 being enabled). Note that because some registers reflect machine topology, all vcpus should be created before this ioctl is invoked.
@@ -3523,6 +3524,17 @@ Possible features: - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can no longer be written using KVM_SET_ONE_REG. + - KVM_ARM_VCPU_HAS_EL2: Enable Nested Virtualisation support, + booting the guest from EL2 instead of EL1. + Depends on KVM_CAP_ARM_EL2. + The VM is running with HCR_EL2.E2H being RES1 (VHE) unless + KVM_ARM_VCPU_HAS_EL2_E2H0 is also set. + + - KVM_ARM_VCPU_HAS_EL2_E2H0: Restrict Nested Virtualisation + support to HCR_EL2.E2H being RES0 (non-VHE). + Depends on KVM_CAP_ARM_EL2_E2H0. + KVM_ARM_VCPU_HAS_EL2 must also be set. + 4.83 KVM_ARM_PREFERRED_TARGET -----------------------------
Signature · 1 line
2.39.2
Re: [PATCH 14/14] KVM: arm64: Document NV caps and vcpu flags
Quoted 4 lines · Marc Zyngier
Describe the two new vcpu flags that control NV, together with the capabilities that advertise them.
Signed-off-by Marc Zyngier <[email protected]>
Thanks,
Oliver
Quoted 16 lines · Marc Zyngier
Since the previous incarnation of the ABI was proved to be subtly wrong, I have reworked it to be more in line with the current way KVM operates.
No more late NV-specific adjustment nor writable ID_AA64MMFR0_EL1.VH. The NV configuration is now entirely selected from the vcpu flags. I've preserved the
KVM_ARM_VCPU_EL2flag which enables NV with VHE, and addedKVM_ARM_VCPU_EL2_E2H0which alters the NV behaviour to only allow nVHE guests without recursive NV support.This series is actually very little new code. The bulk of it is converting the feature downgrade to be per-idreg, essentially going back to the state before
44241f34fac96("KVM: arm64: nv: Use accessors for modifying ID registers"), only slightly modernised. This then becomes part of the reset value computing.
Quoted 6 lines
The rest is simply what you'd expect in terms of being able to write the ID_AA64MMFR4_EL1.NV_frac field, making the correct bits RES0 when needed, probing for capabilities and handling the init flags.
Patches on top of -rc2, with the integration branch at the usual location.
This all looks reasonable to me. NV won't be ready for the limelight this time around so unless someone shouts I plan on taking the first 12 patches of this series in 6.15.
Thanks,
Oliver
Marc Zyngier
maintainerQuoted 22 lines · Oliver Upton
Quoted 20 lines · Marc Zyngier
Since the previous incarnation of the ABI was proved to be subtly wrong, I have reworked it to be more in line with the current way KVM operates.
No more late NV-specific adjustment nor writable ID_AA64MMFR0_EL1.VH. The NV configuration is now entirely selected from the vcpu flags. I've preserved the
KVM_ARM_VCPU_EL2flag which enables NV with VHE, and addedKVM_ARM_VCPU_EL2_E2H0which alters the NV behaviour to only allow nVHE guests without recursive NV support.This series is actually very little new code. The bulk of it is converting the feature downgrade to be per-idreg, essentially going back to the state before
44241f34fac96("KVM: arm64: nv: Use accessors for modifying ID registers"), only slightly modernised. This then becomes part of the reset value computing.The rest is simply what you'd expect in terms of being able to write the ID_AA64MMFR4_EL1.NV_frac field, making the correct bits RES0 when needed, probing for capabilities and handling the init flags.
Quoted 6 lines
Quoted 2 lines
Patches on top of -rc2, with the integration branch at the usual location.
This all looks reasonable to me. NV won't be ready for the limelight this time around so unless someone shouts I plan on taking the first 12 patches of this series in 6.15.
Let me repost it first, as I fixed an embarrassing bug that led to mishandling of ID_UNALLOCATED() registers (solved by consolidating the ID_DESC() macro maze a bit further).
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.