package/freescale-imx: Allow firmware installation on i.MX93
Fabio Estevam
reviewerPATCH 1/2 package/freescale-imx: Allow firmware installation on i.MX93
Currently, the LPDDR firmware binaries do not get installed into the U-Boot mainline directory, causing U-Boot build to fail for i.MX93.
Fix this problem by expanding the BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW checks to also take BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 into account.
--- boot/uboot/Config.in | 1 + package/freescale-imx/firmware-imx/Config.in | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
boot/uboot/Config.in +1 -0
@@ -314,6 +314,7 @@ config BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE bool "U-Boot needs firmware-imx" depends on BR2_PACKAGE_FIRMWARE_IMX depends on BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW || \ + BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 || \ BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW help Some i.MX8 platforms (such as i.MX8 M, i.MX 8M Mini, i.MX 8M
package/freescale-imx/firmware-imx/Config.in +1 -1
@@ -62,7 +62,7 @@ config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91 default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93 -if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW +if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW || BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 choice bool "DDR training binaries"
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Fabio Estevam
reviewerPATCH 2/2 configs/imx93-evk_defconfig: new defconfig
Add a new defconfig for the imx93-evk board that uses upstream components, such as:
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
--- board/freescale/imx93-evk/extlinux.conf.in | 4 ++ board/freescale/imx93-evk/genimage.cfg.in | 17 +++++++ .../arm-trusted-firmware.hash | 2 + .../patches/linux-headers/linux-headers.hash | 1 + .../imx93-evk/patches/linux/linux.hash | 2 + .../imx93-evk/patches/uboot/uboot.hash | 2 + board/freescale/imx93-evk/post-build.sh | 7 +++ board/freescale/imx93-evk/readme.txt | 31 ++++++++++++ configs/imx93-evk_defconfig | 50 +++++++++++++++++++ 9 files changed, 116 insertions(+) create mode 100644 board/freescale/imx93-evk/extlinux.conf.in create mode 100644 board/freescale/imx93-evk/genimage.cfg.in create mode 100644 board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash create mode 120000 board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash create mode 100644 board/freescale/imx93-evk/patches/linux/linux.hash create mode 100644 board/freescale/imx93-evk/patches/uboot/uboot.hash create mode 100755 board/freescale/imx93-evk/post-build.sh create mode 100644 board/freescale/imx93-evk/readme.txt create mode 100644 configs/imx93-evk_defconfig
board/freescale/imx93-evk/extlinux.conf.in new file +4 -0
@@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx93-11x11-evk.dtb + append root=PARTUUID=%PARTUUID% rootwait rw
board/freescale/imx93-evk/genimage.cfg.in new file +17 -0
@@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 32K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +}
board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 06b35a3596b8417bf66f7bfdd7acd181bcb53fc36dc13216227b5cae154e0219 arm-trusted-firmware-v2.12-git4.tar.gz
board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash new file +1 -0
@@ -0,0 +1 @@ +../linux/linux.hash
board/freescale/imx93-evk/patches/linux/linux.hash new file +2 -0
@@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 5f81362a694f51520bff9faecb73f1cc9bc7bece6fdd10d5c27e348df39d7dc4 linux-6.12.16.tar.xz
board/freescale/imx93-evk/patches/uboot/uboot.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f u-boot-2025.01.tar.bz2
board/freescale/imx93-evk/post-build.sh new file +7 -0
@@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname "$0")" +PARTUUID="$("$HOST_DIR"/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf.in" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg.in" > "$BINARIES_DIR/genimage.cfg"
board/freescale/imx93-evk/readme.txt new file +31 -0
@@ -0,0 +1,31 @@ +NXP i.MX93 EVK +============== + +This is a Buildroot target for building an image for the imx93-evk +board using upstream components: TF-A, U-Boot and kernel. + +How to build it +=============== + +Configure Buildroot and build it: + + $ make imx93-evk_defconfig + $ make + +Flashing the SD card image +========================== + +Copy the sdcard.img file into the SD card: + + $ sudo dd if=output/images/sdcard.img of=<your-sd-device>; sync + + +Booting the board +================= + +To boot your newly created system: + +- Insert the SD card in the MicroSD slot of the board. +- Connect a serial to USB cable to the DBG port. +- Open a terminal on the ttyUSB2 port. For example: sudo picocom -b 115200 /dev/ttyUSB2 +- Power on the board.
configs/imx93-evk_defconfig new file +50 -0
50 lines not on this page · raw message
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 7 lines · Fabio Estevam
Currently, the LPDDR firmware binaries do not get installed into the U-Boot mainline directory, causing U-Boot build to fail for i.MX93.
Fix this problem by expanding the
BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FWchecks to also takeBR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9into account.Signed-off-by Fabio Estevam <[email protected]>
Series applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Fabio, all,
package/freescale-imx/firmware-imx/Config.in config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 · line 65
Quoted 3 lines · Fabio Estevam
package/freescale-imx/firmware-imx/Config.in +1
-1-if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW +if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW || BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9
With that changes, the user can choose DDR on i.MX9{1,3} systems whereas only LPDDR is supported. The DDR3 and DDR4 options should be hidden on i.MX93.
Regards,
Quoted 3 lines
choice
bool "DDR training binaries"
Signature · 6 lines
Sébastien Szymanski, Armadeus Systems Software engineer _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Fabio Estevam
reviewerHi Sébastien,
Quoted 3 lines · Sébastien Szymanski
With that changes, the user can choose DDR on i.MX9{1,3} systems whereas only LPDDR is supported. The DDR3 and DDR4 options should be hidden on i.MX93.
Good catch. I will work on a patch to hide DDR3 and DDR4 options for i.MX93.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot