check: disable HAVE_PRIVATENS by default
PATCH 1/1 check: disable HAVE_PRIVATENS by default
Currently we have 3 ways to run a test case in _run_seq():
if [ -n "${HAVE_PRIVATENS}" ]; then
./tools/run_privatens "./$seq"
...
elif [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then
systemd-run --quiet --unit "${unit}" --scope \
./tools/run_setsid "./$seq" &
...
else
./tools/run_setsid "./$seq" &
...
fiThe "privatens" way brings in some regressions. We need more time to develop and test this way, it's not time let it to be the first default choice, so isolate the HAVE_PRIVATENS initialization by a TRY_PRIVATENS parameter, and disable it by default.
Set TRY_PRIVATENS=yes to give "privatens" a try, otherwise run in old ways. This patch can be removed after "privatens" way is stable.
---
Hi,
This patch aims to be talked. Refer to above commit log. This patch is a workaround for 2 targets:
1) Avoid the regressions of lastest xfstests release.
2) Give us more time to improve the "privatens" method.
And compare with revert that commit directly, this patch trys to give "privatens" method a chance to be enabled and tested (by export TRY_PRIVATENS=yes).
Thanks,
Zorro
check | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)
check +7 -15
@@ -674,10 +674,13 @@ _stash_test_status() { esac } -# Can we run in a private pid/mount namespace? -HAVE_PRIVATENS= -./tools/run_privatens bash -c "exit 77" -test $? -eq 77 && HAVE_PRIVATENS=yes +# Don't try "privatens" by default, it's experimental for now. +if [ "$TRY_PRIVATENS" = "yes" ];then + # Can we run in a private pid/mount namespace? + HAVE_PRIVATENS= + ./tools/run_privatens bash -c "exit 77" + test $? -eq 77 && HAVE_PRIVATENS=yes +fi # Can we run systemd scopes? HAVE_SYSTEMD_SCOPES=
@@ -692,15 +695,6 @@ function _adjust_oom_score() { } _adjust_oom_score -500 -warn_deprecated_sessionid() -{ - if [ -z "$WARNED_DEPRECATED_SESSIONID" ]; then - echo "WARNING: Running fstests without private pid/mount namespace" - echo "support is deprecated and will be removed in February 2026." - WARNED_DEPRECATED_SESSIONID=1 - fi -} - # ...and make the tests themselves somewhat more attractive to it, so that if # the system runs out of memory it'll be the test that gets killed and not the # test framework. The test is run in a separate process without any of our
@@ -900,8 +894,6 @@ function run_section() seqres="$check" _check_test_fs - test -n "$HAVE_PRIVATENS" || warn_deprecated_sessionid - loop_status=() # track rerun-on-failure state local tc_status ix local -a _list=( $list )
Signature · 1 line
2.47.1
Quoted 14 lines · Zorro Lang
Currently we have 3 ways to run a test case in
_run_seq():if [ -n "${HAVE_PRIVATENS}" ]; then ./tools/run_privatens "./$seq" ... elif [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then systemd-run --quiet --unit "${unit}" --scope \ ./tools/run_setsid "./$seq" & ... else ./tools/run_setsid "./$seq" & ... fi
Quoted 7 lines
The "privatens" way brings in some regressions. We need more time to develop and test this way, it's not time let it to be the first default choice, so isolate the
HAVE_PRIVATENSinitialization by aTRY_PRIVATENSparameter, and disable it by default.Set TRY_PRIVATENS=yes to give "privatens" a try, otherwise run in old ways. This patch can be removed after "privatens" way is stable.
I think it's ok to turn off privatens for now, seeing as it's clearly caused some regressions that I don't know how to fix. The ones I know about are:
1. The btrfs/14[01] use of BASHPID (not fixed)
2. The weird flock thing in generic/504 (fixed)
But then there's a bunch more complaints about "everything" being broken. If things are still broken for you, please send detailed dumps and let Zorro and I figure that out.
Note that run_privatens is a lot cleaner than run_setsid -- as I've stated elsewhere, using a new unix process session id to run a test is very messy -- there's no longer a controlling tty, so SIGSTOP doesn't work and SIGINT is masked by default.
As I suggested elsewhere today, maybe the solution is to have the tests that *require* the global pid namespace (anything calling the btrfs*read*mirror* helpers) turn themselves off with a "_require_non_privatens"; and then ./check can select setsid for any test containing that phrase.
Thoughts on this part?
--
I'm ok with taking the quickest route to something that makes everyone happy so that we can push to master again, and merge other peoples' changes because I bet those have been backing up for a while.
It's clearly time to talk about reorganizing who's responsible for reviews and for pushing git tree changes, and to take pressure off Zorro. Anand has been signalling interest in taking on some of the btrfs workload, and I think that should happen in some form because Zorro and I are clearly outmatched.
Quoted 5 lines
Signed-off-by Zorro Lang <[email protected]>---
Hi,
Quoted 8 lines
This patch aims to be talked. Refer to above commit log. This patch is a workaround for 2 targets:
1) Avoid the regressions of lastest xfstests release.
2) Give us more time to improve the "privatens" method.And compare with revert that commit directly, this patch trys to give "privatens" method a chance to be enabled and tested (by export TRY_PRIVATENS=yes).
Everyone else: do things work better if you manually patch out the run_privatens selection code so that run_setsid is always used? The setsid code itself is also new; before that fstests just used killall.
Quoted 44 lines
Thanks,
Zorrocheck | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)check +7
-13@@ -674,10 +674,13 @@ _stash_test_status() { esac } -# Can we run in a private pid/mount namespace? -HAVE_PRIVATENS= -./tools/run_privatens bash -c "exit 77" -test $? -eq 77 && HAVE_PRIVATENS=yes +# Don't try "privatens" by default, it's experimental for now. +if [ "$TRY_PRIVATENS" = "yes" ];then + # Can we run in a private pid/mount namespace? + HAVE_PRIVATENS= + ./tools/run_privatens bash -c "exit 77" + test $? -eq 77 && HAVE_PRIVATENS=yes +fi # Can we run systemd scopes? HAVE_SYSTEMD_SCOPES=@@ -692,15 +695,6 @@ function _adjust_oom_score() { } _adjust_oom_score -500 -warn_deprecated_sessionid() -{ - if [ -z "$WARNED_DEPRECATED_SESSIONID" ]; then - echo "WARNING: Running fstests without private pid/mount namespace" - echo "support is deprecated and will be removed in February 2026." - WARNED_DEPRECATED_SESSIONID=1 - fi -} - # ...and make the tests themselves somewhat more attractive to it, so that if # the system runs out of memory it'll be the test that gets killed and not the # test framework. The test is run in a separate process without any of our
check function run_section() · line 904
Quoted 5 lines
check +0
-2@@ -900,8 +894,6 @@ function run_section() seqres="$check" _check_test_fs - test -n "$HAVE_PRIVATENS" || warn_deprecated_sessionid -
Removal of the deprecation should be a separate patch, for which I will pre-offer a
--D
Quoted 6 lines
check +0
-0loop_status=() # track rerun-on-failure state local tc_status ix local -a _list=( $list )Signature · 1 line
2.47.1
Quoted 23 lines · Darrick J. Wong
Quoted 14 lines · Zorro Lang
Currently we have 3 ways to run a test case in
_run_seq():if [ -n "${HAVE_PRIVATENS}" ]; then ./tools/run_privatens "./$seq" ... elif [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then systemd-run --quiet --unit "${unit}" --scope \ ./tools/run_setsid "./$seq" & ... else ./tools/run_setsid "./$seq" & ... fiQuoted 7 lines
The "privatens" way brings in some regressions. We need more time to develop and test this way, it's not time let it to be the first default choice, so isolate the
HAVE_PRIVATENSinitialization by aTRY_PRIVATENSparameter, and disable it by default.Set TRY_PRIVATENS=yes to give "privatens" a try, otherwise run in old ways. This patch can be removed after "privatens" way is stable.
Quoted 6 lines
I think it's ok to turn off privatens for now, seeing as it's clearly caused some regressions that I don't know how to fix. The ones I know about are:
1. The btrfs/14[01] use of BASHPID (not fixed)
2. The weird flock thing in generic/504 (fixed)
And a bug report when /tmp isn't a mount point.
Quoted 10 lines
But then there's a bunch more complaints about "everything" being broken. If things are still broken for you, please send detailed dumps and let Zorro and I figure that out.
Note that
run_privatensis a lot cleaner thanrun_setsid-- as I've stated elsewhere, using a new unix process session id to run a test is very messy -- there's no longer a controlling tty, so SIGSTOP doesn't work and SIGINT is masked by default.
Quoted 7 lines
As I suggested elsewhere today, maybe the solution is to have the tests that *require* the global pid namespace (anything calling the btrfs*read*mirror* helpers) turn themselves off with a "
_require_non_privatens"; and then ./check can select setsid for any test containing that phrase.Thoughts on this part?
More likes a trick, anyway I think we can talk about the way to fix btrfs BASHPID related problems later. And I still don't know if it's the same root cause with Dave Sterba hit.
Quoted 7 lines
--
I'm ok with taking the quickest route to something that makes everyone happy so that we can push to master again, and merge other peoples' changes because I bet those have been backing up for a while.
Quoted 5 lines
It's clearly time to talk about reorganizing who's responsible for reviews and for pushing git tree changes, and to take pressure off Zorro. Anand has been signalling interest in taking on some of the btrfs workload, and I think that should happen in some form because Zorro and I are clearly outmatched.
Acutally I've tried to test most of major fs which fstests supports, before a release. Btrfs testing is supported by my test scripts now. Currently only default btrfs be tested. If Anand would like to test more for btrfs before each release, I think that helps btrfs more.
Quoted 11 lines
Quoted 11 lines
Signed-off-by Zorro Lang <[email protected]>---
Hi,
This patch aims to be talked. Refer to above commit log. This patch is a workaround for 2 targets:
1) Avoid the regressions of lastest xfstests release.
2) Give us more time to improve the "privatens" method.
Quoted 7 lines
Quoted 3 lines
And compare with revert that commit directly, this patch trys to give "privatens" method a chance to be enabled and tested (by export TRY_PRIVATENS=yes).
Everyone else: do things work better if you manually patch out the
run_privatensselection code so thatrun_setsidis always used? The setsid code itself is also new; before that fstests just used killall.
If no one reports bugs to run_setsid, I'll think it's stable (temporarily), then we'll pay more attention to "privatens".
Quoted 48 lines
Quoted 48 lines
Thanks,
Zorrocheck | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)check +7
-13@@ -674,10 +674,13 @@ _stash_test_status() { esac } -# Can we run in a private pid/mount namespace? -HAVE_PRIVATENS= -./tools/run_privatens bash -c "exit 77" -test $? -eq 77 && HAVE_PRIVATENS=yes +# Don't try "privatens" by default, it's experimental for now. +if [ "$TRY_PRIVATENS" = "yes" ];then + # Can we run in a private pid/mount namespace? + HAVE_PRIVATENS= + ./tools/run_privatens bash -c "exit 77" + test $? -eq 77 && HAVE_PRIVATENS=yes +fi # Can we run systemd scopes? HAVE_SYSTEMD_SCOPES=@@ -692,15 +695,6 @@ function _adjust_oom_score() { } _adjust_oom_score -500 -warn_deprecated_sessionid() -{ - if [ -z "$WARNED_DEPRECATED_SESSIONID" ]; then - echo "WARNING: Running fstests without private pid/mount namespace" - echo "support is deprecated and will be removed in February 2026." - WARNED_DEPRECATED_SESSIONID=1 - fi -} - # ...and make the tests themselves somewhat more attractive to it, so that if # the system runs out of memory it'll be the test that gets killed and not the # test framework. The test is run in a separate process without any of our@@ -900,8 +894,6 @@ function run_section() seqres="$check" _check_test_fs
Quoted 6 lines
check function run_section() · line 904
Quoted 2 lines
check +0
-2- test -n "$HAVE_PRIVATENS" || warn_deprecated_sessionid -Removal of the deprecation should be a separate patch, for which I will pre-offer a
Reviewed-by "Darrick J. Wong" <[email protected]>
Ok, I'll splite this patch and send a v2. Thanks your reviewing!
Thanks,
Zorro
Quoted 10 lines
--D
Quoted 6 lines
check +0
-0loop_status=() # track rerun-on-failure state local tc_status ix local -a _list=( $list )Signature · 1 line
2.47.1
Quoted 24 lines · Zorro Lang
Quoted 23 lines · Darrick J. Wong
Quoted 21 lines · Zorro Lang
Currently we have 3 ways to run a test case in
_run_seq():if [ -n "${HAVE_PRIVATENS}" ]; then ./tools/run_privatens "./$seq" ... elif [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then systemd-run --quiet --unit "${unit}" --scope \ ./tools/run_setsid "./$seq" & ... else ./tools/run_setsid "./$seq" & ... fiThe "privatens" way brings in some regressions. We need more time to develop and test this way, it's not time let it to be the first default choice, so isolate the
HAVE_PRIVATENSinitialization by aTRY_PRIVATENSparameter, and disable it by default.Set TRY_PRIVATENS=yes to give "privatens" a try, otherwise run in old ways. This patch can be removed after "privatens" way is stable.
Quoted 8 lines
Quoted 6 lines
I think it's ok to turn off privatens for now, seeing as it's clearly caused some regressions that I don't know how to fix. The ones I know about are:
1. The btrfs/14[01] use of BASHPID (not fixed)
2. The weird flock thing in generic/504 (fixed)And a bug report when /tmp isn't a mount point.
Oh yeah. Forgot that one. We could fix it this way:
check +14 -0
@@ -821,6 +821,20 @@ function run_section() echo "SECTION -- $section" fi + # If we're running in a private mount namespace, /tmp is a private + # directory. We /could/ just mkdir it, but we'd rather have people + # set those paths elsewhere. + if [ "$HAVE_PRIVATENS" = yes ] && [[ $TEST_DIR =~ ^\/tmp ]]; then + echo "$TEST_DIR: TEST_DIR must not be in /tmp" + status=1 + exit + fi + if [ "$HAVE_PRIVATENS" = yes ] && [[ $SCRATCH_MNT =~ ^\/tmp ]]; then + echo "$SCRATCH_MNT: SCRATCH_MNT must not be in /tmp" + status=1 + exit + fi + sect_start=`_wallclock` if $RECREATE_TEST_DEV || [ "$OLD_FSTYP" != "$FSTYP" ]; then echo "RECREATING -- $FSTYP on $TEST_DEV"
Or we could just have _begin_fstest mkdir them if they don't exist.
Unless it'd make more sense to have ./check define TEST_DIR and SCRATCH_MNT itself? Imagine if it instead did this:
FSTESTS_RUN_DIR=/run/fstests-$$ mkdir -p $FSTESTS_RUN_DIR mount -t tmpfs none $FSTESTS_RUN_DIR test -n "$TEST_DEV" && mkdir -p $FSTESTS_RUN_DIR/test test -n "$SCRATCH_MNT" && $FSTESTS_RUN_DIR/scratch mount -o remount,ro $FSTESTS_RUN_DIR test -n "$TEST_DEV" && TEST_DIR=$FSTESTS_RUN_DIR/test test -n "$SCRATCH_MNT" && SCRATCH_MNT=$FSTESTS_RUN_DIR/scratch
Now the user doesn't have to create the directories themselves, and since the underlying $FSTESTS_RUN_DIR is read only, mount failures will show up immediately as write failures instead of filling up the wrong filesystem.
--D
Quoted 132 lines
Quoted 9 lines
But then there's a bunch more complaints about "everything" being broken. If things are still broken for you, please send detailed dumps and let Zorro and I figure that out.
Note that
run_privatensis a lot cleaner thanrun_setsid-- as I've stated elsewhere, using a new unix process session id to run a test is very messy -- there's no longer a controlling tty, so SIGSTOP doesn't work and SIGINT is masked by default.Quoted 7 lines
As I suggested elsewhere today, maybe the solution is to have the tests that *require* the global pid namespace (anything calling the btrfs*read*mirror* helpers) turn themselves off with a "
_require_non_privatens"; and then ./check can select setsid for any test containing that phrase.Thoughts on this part?
More likes a trick, anyway I think we can talk about the way to fix btrfs BASHPID related problems later. And I still don't know if it's the same root cause with Dave Sterba hit.
Quoted 7 lines
--
I'm ok with taking the quickest route to something that makes everyone happy so that we can push to master again, and merge other peoples' changes because I bet those have been backing up for a while.
Quoted 5 lines
It's clearly time to talk about reorganizing who's responsible for reviews and for pushing git tree changes, and to take pressure off Zorro. Anand has been signalling interest in taking on some of the btrfs workload, and I think that should happen in some form because Zorro and I are clearly outmatched.
Acutally I've tried to test most of major fs which fstests supports, before a release. Btrfs testing is supported by my test scripts now. Currently only default btrfs be tested. If Anand would like to test more for btrfs before each release, I think that helps btrfs more.
Quoted 11 lines
Quoted 11 lines
Signed-off-by Zorro Lang <[email protected]>---
Hi,
This patch aims to be talked. Refer to above commit log. This patch is a workaround for 2 targets:
1) Avoid the regressions of lastest xfstests release.
2) Give us more time to improve the "privatens" method.Quoted 7 lines
Quoted 3 lines
And compare with revert that commit directly, this patch trys to give "privatens" method a chance to be enabled and tested (by export TRY_PRIVATENS=yes).
Everyone else: do things work better if you manually patch out the
run_privatensselection code so thatrun_setsidis always used? The setsid code itself is also new; before that fstests just used killall.If no one reports bugs to
run_setsid, I'll think it's stable (temporarily), then we'll pay more attention to "privatens".Quoted 48 lines
Quoted 48 lines
Thanks,
Zorrocheck | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)check +7
-13@@ -674,10 +674,13 @@ _stash_test_status() { esac } -# Can we run in a private pid/mount namespace? -HAVE_PRIVATENS= -./tools/run_privatens bash -c "exit 77" -test $? -eq 77 && HAVE_PRIVATENS=yes +# Don't try "privatens" by default, it's experimental for now. +if [ "$TRY_PRIVATENS" = "yes" ];then + # Can we run in a private pid/mount namespace? + HAVE_PRIVATENS= + ./tools/run_privatens bash -c "exit 77" + test $? -eq 77 && HAVE_PRIVATENS=yes +fi # Can we run systemd scopes? HAVE_SYSTEMD_SCOPES=@@ -692,15 +695,6 @@ function _adjust_oom_score() { } _adjust_oom_score -500 -warn_deprecated_sessionid() -{ - if [ -z "$WARNED_DEPRECATED_SESSIONID" ]; then - echo "WARNING: Running fstests without private pid/mount namespace" - echo "support is deprecated and will be removed in February 2026." - WARNED_DEPRECATED_SESSIONID=1 - fi -} - # ...and make the tests themselves somewhat more attractive to it, so that if # the system runs out of memory it'll be the test that gets killed and not the # test framework. The test is run in a separate process without any of our@@ -900,8 +894,6 @@ function run_section() seqres="$check" _check_test_fsQuoted 6 lines
check function run_section() · line 904
Quoted 2 lines
check +0
-2- test -n "$HAVE_PRIVATENS" || warn_deprecated_sessionid -Removal of the deprecation should be a separate patch, for which I will pre-offer a
Reviewed-by "Darrick J. Wong" <[email protected]>Ok, I'll splite this patch and send a v2. Thanks your reviewing!
Thanks,
ZorroQuoted 10 lines
--D
Quoted 6 lines
check +0
-0loop_status=() # track rerun-on-failure state local tc_status ix local -a _list=( $list )Signature · 1 line
2.47.1
Quoted 51 lines · Darrick J. Wong
Quoted 24 lines · Zorro Lang
Quoted 23 lines · Darrick J. Wong
Quoted 21 lines · Zorro Lang
Currently we have 3 ways to run a test case in
_run_seq():if [ -n "${HAVE_PRIVATENS}" ]; then ./tools/run_privatens "./$seq" ... elif [ -n "${HAVE_SYSTEMD_SCOPES}" ]; then systemd-run --quiet --unit "${unit}" --scope \ ./tools/run_setsid "./$seq" & ... else ./tools/run_setsid "./$seq" & ... fiThe "privatens" way brings in some regressions. We need more time to develop and test this way, it's not time let it to be the first default choice, so isolate the
HAVE_PRIVATENSinitialization by aTRY_PRIVATENSparameter, and disable it by default.Set TRY_PRIVATENS=yes to give "privatens" a try, otherwise run in old ways. This patch can be removed after "privatens" way is stable.
Quoted 8 lines
Quoted 6 lines
I think it's ok to turn off privatens for now, seeing as it's clearly caused some regressions that I don't know how to fix. The ones I know about are:
1. The btrfs/14[01] use of BASHPID (not fixed)
2. The weird flock thing in generic/504 (fixed)And a bug report when /tmp isn't a mount point.
Oh yeah. Forgot that one. We could fix it this way:
check +7
-0@@ -821,6 +821,20 @@ function run_section() echo "SECTION -- $section" fi + # If we're running in a private mount namespace, /tmp is a private + # directory. We /could/ just mkdir it, but we'd rather have people + # set those paths elsewhere. + if [ "$HAVE_PRIVATENS" = yes ] && [[ $TEST_DIR =~ ^\/tmp ]]; then + echo "$TEST_DIR: TEST_DIR must not be in /tmp" + status=1 + exit
check function run_section() · line 840
Quoted 10 lines
check +7
-0+ fi + if [ "$HAVE_PRIVATENS" = yes ] && [[ $SCRATCH_MNT =~ ^\/tmp ]]; then + echo "$SCRATCH_MNT: SCRATCH_MNT must not be in /tmp" + status=1 + exit + fi + sect_start=`_wallclock` if $RECREATE_TEST_DEV || [ "$OLD_FSTYP" != "$FSTYP" ]; then echo "RECREATING -- $FSTYP on $TEST_DEV"
Oh, I didn't describe clearly, I mean this one bug:
https://lore.kernel.org/fstests/[email protected]/
some systems might not have a tmpfs on /tmp ^^ I'll leave more review points under that thread.
Quoted 9 lines
Or we could just have
_begin_fstestmkdir them if they don't exist.Unless it'd make more sense to have ./check define
TEST_DIRandSCRATCH_MNTitself? Imagine if it instead did this:FSTESTS_RUN_DIR=/run/fstests-$$
mkdir -p $FSTESTS_RUN_DIR
mount -t tmpfs none $FSTESTS_RUN_DIR
Do you hope to have TEST_DIR and SCRATCH_MNT under a tmpfs?
Quoted 10 lines
test -n "$TEST_DEV" && mkdir -p $FSTESTS_RUN_DIR/test test -n "$SCRATCH_MNT" && $FSTESTS_RUN_DIR/scratch mount -o remount,ro $FSTESTS_RUN_DIR test -n "$TEST_DEV" && TEST_DIR=$FSTESTS_RUN_DIR/test test -n "$SCRATCH_MNT" && SCRATCH_MNT=$FSTESTS_RUN_DIR/scratchNow the user doesn't have to create the directories themselves, and since the underlying $FSTESTS_RUN_DIR is read only, mount failures will show up immediately as write failures instead of filling up the wrong filesystem.
I think we can talk about more details in another thread.
Thanks,
Zorro
Quoted 136 lines
--D
Quoted 132 lines
Quoted 9 lines
But then there's a bunch more complaints about "everything" being broken. If things are still broken for you, please send detailed dumps and let Zorro and I figure that out.
Note that
run_privatensis a lot cleaner thanrun_setsid-- as I've stated elsewhere, using a new unix process session id to run a test is very messy -- there's no longer a controlling tty, so SIGSTOP doesn't work and SIGINT is masked by default.Quoted 7 lines
As I suggested elsewhere today, maybe the solution is to have the tests that *require* the global pid namespace (anything calling the btrfs*read*mirror* helpers) turn themselves off with a "
_require_non_privatens"; and then ./check can select setsid for any test containing that phrase.Thoughts on this part?
More likes a trick, anyway I think we can talk about the way to fix btrfs BASHPID related problems later. And I still don't know if it's the same root cause with Dave Sterba hit.
Quoted 7 lines
--
I'm ok with taking the quickest route to something that makes everyone happy so that we can push to master again, and merge other peoples' changes because I bet those have been backing up for a while.
Quoted 5 lines
It's clearly time to talk about reorganizing who's responsible for reviews and for pushing git tree changes, and to take pressure off Zorro. Anand has been signalling interest in taking on some of the btrfs workload, and I think that should happen in some form because Zorro and I are clearly outmatched.
Acutally I've tried to test most of major fs which fstests supports, before a release. Btrfs testing is supported by my test scripts now. Currently only default btrfs be tested. If Anand would like to test more for btrfs before each release, I think that helps btrfs more.
Quoted 11 lines
Quoted 11 lines
Signed-off-by Zorro Lang <[email protected]>---
Hi,
This patch aims to be talked. Refer to above commit log. This patch is a workaround for 2 targets:
1) Avoid the regressions of lastest xfstests release.
2) Give us more time to improve the "privatens" method.Quoted 7 lines
Quoted 3 lines
And compare with revert that commit directly, this patch trys to give "privatens" method a chance to be enabled and tested (by export TRY_PRIVATENS=yes).
Everyone else: do things work better if you manually patch out the
run_privatensselection code so thatrun_setsidis always used? The setsid code itself is also new; before that fstests just used killall.If no one reports bugs to
run_setsid, I'll think it's stable (temporarily), then we'll pay more attention to "privatens".Quoted 48 lines
Quoted 48 lines
Thanks,
Zorrocheck | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)check +7
-13@@ -674,10 +674,13 @@ _stash_test_status() { esac } -# Can we run in a private pid/mount namespace? -HAVE_PRIVATENS= -./tools/run_privatens bash -c "exit 77" -test $? -eq 77 && HAVE_PRIVATENS=yes +# Don't try "privatens" by default, it's experimental for now. +if [ "$TRY_PRIVATENS" = "yes" ];then + # Can we run in a private pid/mount namespace? + HAVE_PRIVATENS= + ./tools/run_privatens bash -c "exit 77" + test $? -eq 77 && HAVE_PRIVATENS=yes +fi # Can we run systemd scopes? HAVE_SYSTEMD_SCOPES=@@ -692,15 +695,6 @@ function _adjust_oom_score() { } _adjust_oom_score -500 -warn_deprecated_sessionid() -{ - if [ -z "$WARNED_DEPRECATED_SESSIONID" ]; then - echo "WARNING: Running fstests without private pid/mount namespace" - echo "support is deprecated and will be removed in February 2026." - WARNED_DEPRECATED_SESSIONID=1 - fi -} - # ...and make the tests themselves somewhat more attractive to it, so that if # the system runs out of memory it'll be the test that gets killed and not the # test framework. The test is run in a separate process without any of our@@ -900,8 +894,6 @@ function run_section() seqres="$check" _check_test_fsQuoted 6 lines
check function run_section() · line 904
Quoted 2 lines
check +0
-2- test -n "$HAVE_PRIVATENS" || warn_deprecated_sessionid -Removal of the deprecation should be a separate patch, for which I will pre-offer a
Reviewed-by "Darrick J. Wong" <[email protected]>Ok, I'll splite this patch and send a v2. Thanks your reviewing!
Thanks,
ZorroQuoted 10 lines
--D
Quoted 6 lines
check +0
-0loop_status=() # track rerun-on-failure state local tc_status ix local -a _list=( $list )Signature · 1 line
2.47.1