dt-bindings: iio: accel: add binding documentation for ADIS16203
Subsystems (4)
PATCH 1/1 dt-bindings: iio: accel: add binding documentation for ADIS16203
This patch add device tree binding documentation for ADIS16203.
Signed-off-by Saalim Quadri <[email protected]>
--- .../bindings/iio/accel/adi,adis16203.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml
Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml new file +52 -0
@@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADIS16203 Programmable 360 Degrees Inclinometer + +maintainers: + - Barry Song <[email protected]> + +description: | + https://www.analog.com/media/en/technical-documentation/data-sheets/adis16203.pdf + +properties: + compatible: + enum: + - adi,adis16203 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adis16203"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +...
Signature · 1 line
2.34.1
Quoted 14 lines · Saalim Quadri
This patch add device tree binding documentation for ADIS16203.
Signed-off-by Saalim Quadri <[email protected]>--- .../bindings/iio/accel/adi,adis16203.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16203.yamlDocumentation/devicetree/bindings/iio/accel/adi,adis16203.yaml new file +0
-0
Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml line 4
Quoted 4 lines
Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml new file +4
-0@@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16203.yaml#
That's identical to adi,adis16201 which already covers more than one device. Don't create unnecessary bindings, so this goes to existing binding.
Best regards,
Krzysztof