staging: iio: ad9832: Use devm_regulator_get_enable()
Subsystems (4)
PATCH v2 1/1 staging: iio: ad9832: Use devm_regulator_get_enable()
The regulators are only enabled at probe(), hence replace the boilerplate code by making use of devm_regulator_get_enable() helper.
Signed-off-by Saalim Quadri <[email protected]>
---
V1 -> V2: Fixed indentations and commit description
drivers/staging/iio/frequency/ad9832.c | 37 +++----------------------- 1 file changed, 4 insertions(+), 33 deletions(-)
drivers/staging/iio/frequency/ad9832.c +4 -33
@@ -74,8 +74,6 @@/** * struct ad9832_state - driver instance specific data * @spi: spi_device -* @avdd: supply regulator for the analog section -* @dvdd: supply regulator for the digital section * @mclk: external master clock * @ctrl_fp: cached frequency/phase control word * @ctrl_ss: cached sync/selsrc control word
@@ -94,8 +92,6 @@struct ad9832_state {struct spi_device *spi; -struct regulator *avdd; -struct regulator *dvdd;struct clk *mclk;unsigned short ctrl_fp;unsigned short ctrl_ss;
@@ -297,11 +293,6 @@ static const struct iio_info ad9832_info = { .attrs = &ad9832_attribute_group, }; -static void ad9832_reg_disable (void *reg) -{ -regulator_disable (reg); -} -static int ad9832_probe (struct spi_device *spi) {struct ad9832_platform_data *pdata =dev_get_platdata (&spi->dev);
@@ -320,33 +311,13 @@ static int ad9832_probe(struct spi_device *spi) st =iio_priv (indio_dev); - st->avdd =devm_regulator_get (&spi->dev,"avdd" ); -if (IS_ERR (st->avdd)) -return PTR_ERR (st->avdd); - - ret =regulator_enable (st->avdd); -if (ret) { -dev_err (&spi->dev,"Failed to enable specified AVDD supply\n" ); -return ret; - } - - ret =devm_add_action_or_reset (&spi->dev, ad9832_reg_disable, st->avdd); + ret =devm_regulator_get_enable (&spi->dev,"avdd" );if (ret) -return ret; - - st->dvdd =devm_regulator_get (&spi->dev,"dvdd" ); -if (IS_ERR (st->dvdd)) -return PTR_ERR (st->dvdd); +return dev_err_probe (&spi->dev, ret,"failed to enable specified AVDD voltage\n" ); - ret =regulator_enable (st->dvdd); -if (ret) { -dev_err (&spi->dev,"Failed to enable specified DVDD supply\n" ); -return ret; - } - - ret =devm_add_action_or_reset (&spi->dev, ad9832_reg_disable, st->dvdd); + ret =devm_regulator_get_enable (&spi->dev,"dvdd" );if (ret) -return ret; +return dev_err_probe (&spi->dev, ret,"Failed to enable specified DVDD supply\n" ); st->mclk =devm_clk_get_enabled (&spi->dev,"mclk" );if (IS_ERR (st->mclk))
Signature · 1 line
2.34.1
Jonathan Cameron
maintainerQuoted 3 lines · On Thu, 6 Mar 2025 05:30:40 +0530 Saalim Quadri <[email protected]> wrote:
The regulators are only enabled at
probe(), hence replace the boilerplate code by making use ofdevm_regulator_get_enable()helper.
I rewrapped the description to 75 chars and applied.
Thanks,
Jonathan
Quoted 80 lines
Signed-off-by Saalim Quadri <[email protected]>---
V1 -> V2: Fixed indentations and commit descriptiondrivers/staging/iio/frequency/ad9832.c | 37 +++----------------------- 1 file changed, 4 insertions(+), 33 deletions(-)drivers/staging/iio/frequency/ad9832.c +4
-33@@ -74,8 +74,6 @@/** * struct ad9832_state - driver instance specific data * @spi: spi_device -* @avdd: supply regulator for the analog section -* @dvdd: supply regulator for the digital section * @mclk: external master clock * @ctrl_fp: cached frequency/phase control word * @ctrl_ss: cached sync/selsrc control word @@ -94,8 +92,6 @@struct ad9832_state {struct spi_device *spi; -struct regulator *avdd; -struct regulator *dvdd;struct clk *mclk;unsigned short ctrl_fp;unsigned short ctrl_ss;@@ -297,11 +293,6 @@ static const struct iio_info ad9832_info = { .attrs = &ad9832_attribute_group, }; -static void ad9832_reg_disable (void *reg) -{ -regulator_disable (reg); -} -static int ad9832_probe (struct spi_device *spi) {struct ad9832_platform_data *pdata =dev_get_platdata (&spi->dev);@@ -320,33 +311,13 @@ static int ad9832_probe(struct spi_device *spi) st =iio_priv (indio_dev); - st->avdd =devm_regulator_get (&spi->dev,"avdd" ); -if (IS_ERR (st->avdd)) -return PTR_ERR (st->avdd); - - ret =regulator_enable (st->avdd); -if (ret) { -dev_err (&spi->dev,"Failed to enable specified AVDD supply\n" ); -return ret; - } - - ret =devm_add_action_or_reset (&spi->dev, ad9832_reg_disable, st->avdd); + ret =devm_regulator_get_enable (&spi->dev,"avdd" );if (ret) -return ret; - - st->dvdd =devm_regulator_get (&spi->dev,"dvdd" ); -if (IS_ERR (st->dvdd)) -return PTR_ERR (st->dvdd); +return dev_err_probe (&spi->dev, ret,"failed to enable specified AVDD voltage\n" ); - ret =regulator_enable (st->dvdd); -if (ret) { -dev_err (&spi->dev,"Failed to enable specified DVDD supply\n" ); -return ret; - } - - ret =devm_add_action_or_reset (&spi->dev, ad9832_reg_disable, st->dvdd); + ret =devm_regulator_get_enable (&spi->dev,"dvdd" );if (ret) -return ret; +return dev_err_probe (&spi->dev, ret,"Failed to enable specified DVDD supply\n" ); st->mclk =devm_clk_get_enabled (&spi->dev,"mclk" );if (IS_ERR (st->mclk))