Skip to contentSkip to conversation

Driver for the Apple SPMI controller

PATCH Superseded Sasha Finkelstein 3 participants 8 messages Mar 7, 2025 – Mar 8, 2025

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Driver for the Apple SPMI controller

Hi.

This patch series adds support for the SPMI controller persent in most Apple SoCs. The drivers for the attached PMU and subdevices will be in further patch series.

---
Changes in v2:
- Removed redundant error prints
- Various style fixes
- Better explanation of why the driver is needed
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Jean-Francois Bortolotti (1):
spmi: add a spmi driver for Apple SoC

Sasha Finkelstein (2):
dt-bindings: spmi: Add Apple SPMI controller
arm64: dts: apple: Add SPMI controller nodes

 .../devicetree/bindings/spmi/apple,spmi.yaml       |  49 ++++++
 MAINTAINERS                                        |   2 +
 arch/arm64/boot/dts/apple/t600x-die0.dtsi          |   7 +
 arch/arm64/boot/dts/apple/t8103.dtsi               |   8 +
 arch/arm64/boot/dts/apple/t8112.dtsi               |   7 +
 drivers/spmi/Kconfig                               |   8 +
 drivers/spmi/Makefile                              |   1 +
 drivers/spmi/spmi-apple-controller.c               | 178 +++++++++++++++++++++
 8 files changed, 260 insertions(+)

---
base-commit: 48a5eed9ad584315c30ed35204510536235ce402
change-id: 20250304-spmi-6d3c24b9027a

#1 lore raw

PATCH v2 1/3 dt-bindings: spmi: Add Apple SPMI controller

From: Sasha Finkelstein <[email protected]>

Add bindings for the SPMI controller present on most Apple SoCs

---
 .../devicetree/bindings/spmi/apple,spmi.yaml       | 49 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 50 insertions(+)
Documentation/devicetree/bindings/spmi/apple,spmi.yaml new file +49 -0
new file mode 100644
index 0000000000000000000000000000000000000000..16bd7eb2b7af2c0b176f0e5b1970f4670af691da
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/apple,spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SPMI controller
+
+maintainers:
+  - Sasha Finkelstein <[email protected]>
+
+description: A SPMI controller present on most Apple SoCs
+
+allOf:
+  - $ref: spmi.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-spmi
+          - apple,t6000-spmi
+          - apple,t8112-spmi
+      - const: apple,spmi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    spmi@920a1300 {
+        compatible = "apple,t6000-spmi", "apple,spmi";
+        reg = <0x920a1300 0x100>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        pmic@f {
+            reg = <0xf SPMI_USID>;
+            /* PMIC-specific properties */
+        };
+    };
MAINTAINERS +1 -0
index 8e0736dc2ee0e33544fa373a4978b7dae18c040c..271ff8110df83c2d4fe7fbbfffc0a72259460bc5 100644
@@ -2236,6 +2236,7 @@ F:	Documentation/devicetree/bindings/pci/apple,pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 F:	Documentation/devicetree/bindings/power/apple*
 F:	Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
+F:	Documentation/devicetree/bindings/spmi/apple,spmi.yaml
 F:	Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
 F:	arch/arm64/boot/dts/apple/
 F:	drivers/bluetooth/hci_bcm4377.c
Signature · 1 line
2.48.1
#3 lore raw

PATCH v2 2/3 spmi: add a spmi driver for Apple SoC

In reply to Sasha Finkelstein

From: Jean-Francois Bortolotti <[email protected]>

The connected PMU contains several useful nvmem cells such as RTC offset, boot failure counters, reboot/shutdown selector, and a few others. In addition M3+ machines have their USB-PD controller connected via SPMI.

---
 MAINTAINERS                          |   1 +
 drivers/spmi/Kconfig                 |   8 ++
 drivers/spmi/Makefile                |   1 +
 drivers/spmi/spmi-apple-controller.c | 178 +++++++++++++++++++++++++++++++++++
 4 files changed, 188 insertions(+)
MAINTAINERS +1 -0
index 271ff8110df83c2d4fe7fbbfffc0a72259460bc5..9006695261d29fbc1e15659c2b43d7afeee0b656 100644
@@ -2254,6 +2254,7 @@ F:	drivers/nvmem/apple-efuses.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/pwm/pwm-apple.c
 F:	drivers/soc/apple/*
+F:	drivers/spmi/spmi-apple-controller.c
 F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h
drivers/spmi/Kconfig +8 -0
index 73780204631463631cabcbad5bf83e8dbbee94ce..9005fa91d9f4e541403ccc7bf84e0592402ac41e 100644
@@ -11,6 +11,14 @@ menuconfig SPMI
 
 if SPMI
 
+config SPMI_APPLE
+	tristate "Apple SoC SPMI Controller platform driver"
+	depends on ARCH_APPLE || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  SPMI controller present on many Apple SoCs, including the
+	  t8103 (M1) and t600x (M1 Pro/Max).
+
 config SPMI_HISI3670
 	tristate "Hisilicon 3670 SPMI Controller"
 	select IRQ_DOMAIN_HIERARCHY
drivers/spmi/Makefile +1 -0
index 7f152167bb05b2c24a0f9669f60278152898eebb..38ac635645ba65aa46cb5e8a50072ed9771e229b 100644
@@ -4,6 +4,7 @@
 #
 obj-$(CONFIG_SPMI)	+= spmi.o spmi-devres.o
 
+obj-$(CONFIG_SPMI_APPLE)	+= spmi-apple-controller.o
 obj-$(CONFIG_SPMI_HISI3670)	+= hisi-spmi-controller.o
 obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
 obj-$(CONFIG_SPMI_MTK_PMIF)	+= spmi-mtk-pmif.o
drivers/spmi/spmi-apple-controller.c new file +178 -0

178 lines not on this page · raw message

Signature · 1 line
2.48.1
#4 lore raw

Re: [PATCH v2 2/3] spmi: add a spmi driver for Apple SoC

drivers/spmi/spmi-apple-controller.c line 47

Quoted 9 lines
drivers/spmi/spmi-apple-controller.c new file +9 -0
+static inline u32 read_reg(struct apple_spmi *spmi, int offset)
+{
+	return readl(spmi->regs + offset);
+}
+
+static inline void write_reg(u32 value, struct apple_spmi *spmi, int offset)
+{
+	writel(value, spmi->regs + offset);
+}

At this point I don't think these are gaining us anything. Can we inline them?

Reviewed-by on v2 2/3
#5 lore raw

Re: [PATCH v2 2/3] spmi: add a spmi driver for Apple SoC

In reply to Sasha Finkelstein

Hi,

Quoted 93 lines · On Fri, Mar 7, 2025, at 21:09, Sasha Finkelstein via B4 Relay wrote:

From: Jean-Francois Bortolotti <[email protected]>

The connected PMU contains several useful nvmem cells such as RTC offset, boot failure counters, reboot/shutdown selector, and a few others. In addition M3+ machines have their USB-PD controller connected via SPMI.

---
 MAINTAINERS                          |   1 +
 drivers/spmi/Kconfig                 |   8 ++
 drivers/spmi/Makefile                |   1 +
 drivers/spmi/spmi-apple-controller.c | 178 +++++++++++++++++++++++++++++++++++
 4 files changed, 188 insertions(+)
MAINTAINERS +0 -0
index 

271ff8110df83c2d4fe7fbbfffc0a72259460bc5..9006695261d29fbc1e15659c2b43d7afeee0b656 100644

MAINTAINERS +1 -0
@@ -2254,6 +2254,7 @@ F:	drivers/nvmem/apple-efuses.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/pwm/pwm-apple.c
 F:	drivers/soc/apple/*
+F:	drivers/spmi/spmi-apple-controller.c
 F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h
drivers/spmi/Kconfig +0 -0
index 

73780204631463631cabcbad5bf83e8dbbee94ce..9005fa91d9f4e541403ccc7bf84e0592402ac41e 100644

drivers/spmi/Kconfig +8 -0
@@ -11,6 +11,14 @@ menuconfig SPMI
 
 if SPMI
 
+config SPMI_APPLE
+	tristate "Apple SoC SPMI Controller platform driver"
+	depends on ARCH_APPLE || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  SPMI controller present on many Apple SoCs, including the
+	  t8103 (M1) and t600x (M1 Pro/Max).
+
 config SPMI_HISI3670
 	tristate "Hisilicon 3670 SPMI Controller"
 	select IRQ_DOMAIN_HIERARCHY
drivers/spmi/Makefile +0 -0
index 

7f152167bb05b2c24a0f9669f60278152898eebb..38ac635645ba65aa46cb5e8a50072ed9771e229b 100644

drivers/spmi/Makefile +1 -0
@@ -4,6 +4,7 @@
 #
 obj-$(CONFIG_SPMI)	+= spmi.o spmi-devres.o
 
+obj-$(CONFIG_SPMI_APPLE)	+= spmi-apple-controller.o
 obj-$(CONFIG_SPMI_HISI3670)	+= hisi-spmi-controller.o
 obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
 obj-$(CONFIG_SPMI_MTK_PMIF)	+= spmi-mtk-pmif.o
drivers/spmi/spmi-apple-controller.c new file +0 -0
new file mode 100644
index 

0000000000000000000000000000000000000000..2d4a677aaff6b10fce80f7eacc330605674ea495

drivers/spmi/spmi-apple-controller.c new file +8 -0
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Apple SoC SPMI device driver
+ *
+ * Copyright The Asahi Linux Contributors
+ *
+ * Inspired by:
+ *		OpenBSD support Copyright (c) 2021 Mark Kettenis 

<[email protected]>
+ * Correllium support Copyright (C) 2021 Corellium LLC
+ * hisi-spmi-controller.c
+ * spmi-pmic-arb.c Copyright (c) 2021, The Linux Foundation.
+ */

drivers/spmi/spmi-apple-controller.c new file +7 -0
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/spmi.h>

drivers/spmi/spmi-apple-controller.c line 29

Quoted 10 lines
drivers/spmi/spmi-apple-controller.c new file +10 -0
+
+/* SPMI Controller Registers */
+#define SPMI_STATUS_REG 0
+#define SPMI_CMD_REG 0x4
+#define SPMI_RSP_REG 0x8
+
+#define SPMI_RX_FIFO_EMPTY BIT(24)
+
+#define REG_POLL_INTERVAL 10000
+#define REG_POLL_TIMEOUT (REG_POLL_INTERVAL * 5)

I'd either add a comment that these are in us or add a _US suffix

Quoted 35 lines
drivers/spmi/spmi-apple-controller.c new file +15 -0
+
+struct apple_spmi {
+	void __iomem *regs;
+};
+
+#define poll_reg(spmi, reg, val, cond) \
+	readl_poll_timeout((spmi)->regs + (reg), (val), (cond), \
+			   REG_POLL_INTERVAL, REG_POLL_TIMEOUT)
+
+static inline u32 read_reg(struct apple_spmi *spmi, int offset)
+{
+	return readl(spmi->regs + offset);
+}
+
+static inline void write_reg(u32 value, struct apple_spmi *spmi, int 

offset)

drivers/spmi/spmi-apple-controller.c new file +5 -0
+{
+	writel(value, spmi->regs + offset);
+}
+
+static inline u32 apple_spmi_pack_cmd(u8 opc, u8 sid, u16 saddr, 

size_t len)

drivers/spmi/spmi-apple-controller.c new file +12 -0
+{
+	return opc | sid << 8 | saddr << 16 | (len - 1) | (1 << 15);
+}
+
+/* Wait for Rx FIFO to have something */
+static int apple_spmi_wait_rx_not_empty(struct spmi_controller *ctrl)
+{
+	struct apple_spmi *spmi = spmi_controller_get_drvdata(ctrl);
+	int ret;
+	u32 status;
+
+	ret = poll_reg(spmi, SPMI_STATUS_REG, status, !(status & 

SPMI_RX_FIFO_EMPTY));

drivers/spmi/spmi-apple-controller.c line 64

Quoted 3 lines
drivers/spmi/spmi-apple-controller.c new file +3 -0
+	if (ret) {
+		dev_err(&ctrl->dev,
+			"%s: Failed to wait for RX FIFO not empty\n", __func__);

__func__ is always the same here now. I'd just drop that prefix.

With that and Alyssa's remark addressed:

Quoted 117 lines
drivers/spmi/spmi-apple-controller.c new file +114 -0
+		return ret;
+	}
+
+	return 0;
+}
+
+static int spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			 u16 saddr, u8 *buf, size_t len)
+{
+	struct apple_spmi *spmi = spmi_controller_get_drvdata(ctrl);
+	u32 spmi_cmd = apple_spmi_pack_cmd(opc, sid, saddr, len);
+	u32 rsp;
+	size_t len_read = 0;
+	u8 i;
+	int ret;
+
+	write_reg(spmi_cmd, spmi, SPMI_CMD_REG);
+
+	ret = apple_spmi_wait_rx_not_empty(ctrl);
+	if (ret)
+		return ret;
+
+	/* Discard SPMI reply status */
+	read_reg(spmi, SPMI_RSP_REG);
+
+	/* Read SPMI data reply */
+	while (len_read < len) {
+		rsp = read_reg(spmi, SPMI_RSP_REG);
+		i = 0;
+		while ((len_read < len) && (i < 4)) {
+			buf[len_read++] = ((0xff << (8 * i)) & rsp) >> (8 * i);
+			i += 1;
+		}
+	}
+
+	return 0;
+}
+
+static int spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			  u16 saddr, const u8 *buf, size_t len)
+{
+	struct apple_spmi *spmi = spmi_controller_get_drvdata(ctrl);
+	u32 spmi_cmd = apple_spmi_pack_cmd(opc, sid, saddr, len);
+	size_t i = 0, j;
+	int ret;
+
+	write_reg(spmi_cmd, spmi, SPMI_CMD_REG);
+
+	while (i < len) {
+		j = 0;
+		spmi_cmd = 0;
+		while ((j < 4) & (i < len))
+			spmi_cmd |= buf[i++] << (j++ * 8);
+
+		write_reg(spmi_cmd, spmi, SPMI_CMD_REG);
+	}
+
+	ret = apple_spmi_wait_rx_not_empty(ctrl);
+	if (ret)
+		return ret;
+
+	/* Discard */
+	read_reg(spmi, SPMI_RSP_REG);
+
+	return 0;
+}
+
+static int apple_spmi_probe(struct platform_device *pdev)
+{
+	struct apple_spmi *spmi;
+	struct spmi_controller *ctrl;
+	int ret;
+
+	ctrl = devm_spmi_controller_alloc(&pdev->dev, sizeof(*spmi));
+	if (IS_ERR(ctrl))
+		return -ENOMEM;
+
+	spmi = spmi_controller_get_drvdata(ctrl);
+
+	spmi->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spmi->regs))
+		return PTR_ERR(spmi->regs);
+
+	ctrl->dev.of_node = pdev->dev.of_node;
+
+	ctrl->read_cmd = spmi_read_cmd;
+	ctrl->write_cmd = spmi_write_cmd;
+
+	ret = devm_spmi_controller_add(&pdev->dev, ctrl);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "spmi_controller_add failed\n");
+
+	return 0;
+}
+
+static const struct of_device_id apple_spmi_match_table[] = {
+	{ .compatible = "apple,spmi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, apple_spmi_match_table);
+
+static struct platform_driver apple_spmi_driver = {
+	.probe		= apple_spmi_probe,
+	.driver		= {
+		.name	= "apple-spmi",
+		.of_match_table = apple_spmi_match_table,
+	},
+};
+module_platform_driver(apple_spmi_driver);
+
+MODULE_AUTHOR("Jean-Francois Bortolotti <[email protected]>");
+MODULE_DESCRIPTION("Apple SoC SPMI driver");
+MODULE_LICENSE("GPL");
Signature · 2 lines
-- 
2.48.1

Sven

#6 lore raw

PATCH v2 3/3 arm64: dts: apple: Add SPMI controller nodes

In reply to Sasha Finkelstein

From: Sasha Finkelstein <[email protected]>

Add device tree entries for the SPMI controller

---
 arch/arm64/boot/dts/apple/t600x-die0.dtsi | 7 +++++++
 arch/arm64/boot/dts/apple/t8103.dtsi      | 8 ++++++++
 arch/arm64/boot/dts/apple/t8112.dtsi      | 7 +++++++
 3 files changed, 22 insertions(+)
arch/arm64/boot/dts/apple/t600x-die0.dtsi +7 -0
index b1c875e692c8fb9c0af46a23568a7b0cd720141b..d544a35c8af414c583d38b040e1aa753902f1c93 100644
@@ -53,6 +53,13 @@ wdt: watchdog@2922b0000 {
 		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+	};
+
 	sio_dart_0: iommu@39b004000 {
 		compatible = "apple,t6000-dart";
 		reg = <0x3 0x9b004000 0x0 0x4000>;
arch/arm64/boot/dts/apple/t8103.dtsi +8 -0
index 9b0dad6b618444ac6b1c9735c50cccfc3965f947..0f03dc808cf7c6b7d71afc79dd29d368f957f979 100644
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -604,6 +605,13 @@ pcie_pins: pcie-pins {
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
arch/arm64/boot/dts/apple/t8112.dtsi +7 -0
index 1666e6ab250bc0be9b8318e3c8fc903ccd3f3760..fecf70eba255c668757e2edfe25a4e9e7c0d0bad 100644
@@ -641,6 +641,13 @@ pcie_pins: pcie-pins {
 			};
 		};
 
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
Signature · 1 line
2.48.1
#7 lore raw

Re: [PATCH v2 3/3] arm64: dts: apple: Add SPMI controller nodes

Hi,

Quoted 20 lines · On Fri, Mar 7, 2025, at 21:09, Sasha Finkelstein via B4 Relay wrote:

From: Sasha Finkelstein <[email protected]>

Add device tree entries for the SPMI controller

---
 arch/arm64/boot/dts/apple/t600x-die0.dtsi | 7 +++++++
 arch/arm64/boot/dts/apple/t8103.dtsi      | 8 ++++++++
 arch/arm64/boot/dts/apple/t8112.dtsi      | 7 +++++++
 3 files changed, 22 insertions(+)
arch/arm64/boot/dts/apple/t600x-die0.dtsi +0 -0
index 

b1c875e692c8fb9c0af46a23568a7b0cd720141b..d544a35c8af414c583d38b040e1aa753902f1c93 100644

arch/arm64/boot/dts/apple/t600x-die0.dtsi wdt: watchdog@2922b0000 { · line 62

Quoted 10 lines
arch/arm64/boot/dts/apple/t600x-die0.dtsi +7 -0
@@ -53,6 +53,13 @@ wdt: watchdog@2922b0000 {
 		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+	};
+

Please keep the nodes ordered by their MMIO address. The watchdog node above is at 2922b0000 and should come after spmi@2920a1300. Please also check the other nodes you're adding here.

Quoted 56 lines
arch/arm64/boot/dts/apple/t600x-die0.dtsi +0 -0
 	sio_dart_0: iommu@39b004000 {
 		compatible = "apple,t6000-dart";
 		reg = <0x3 0x9b004000 0x0 0x4000>;
arch/arm64/boot/dts/apple/t8103.dtsi +0 -0
index 

9b0dad6b618444ac6b1c9735c50cccfc3965f947..0f03dc808cf7c6b7d71afc79dd29d368f957f979 100644

arch/arm64/boot/dts/apple/t8103.dtsi +8 -0
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -604,6 +605,13 @@ pcie_pins: pcie-pins {
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
arch/arm64/boot/dts/apple/t8112.dtsi +0 -0
index 

1666e6ab250bc0be9b8318e3c8fc903ccd3f3760..fecf70eba255c668757e2edfe25a4e9e7c0d0bad 100644

arch/arm64/boot/dts/apple/t8112.dtsi +7 -0
@@ -641,6 +641,13 @@ pcie_pins: pcie-pins {
 			};
 		};
 
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
Signature · 2 lines
-- 
2.48.1

thanks,

Sven