at91: Remove non-devicetree board support for SAMA5D3 SOC
PATCH 1/1 at91: Remove non-devicetree board support for SAMA5D3 SOC
Since all SAMA5D3 boards now do not use the devicetree, we can safely remove the board support files for this SOC.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/mach-at91/Kconfig | 5 - arch/arm/mach-at91/Makefile | 1 - arch/arm/mach-at91/sama5d3.c | 410 ---------------------- arch/arm/mach-at91/sama5d3_devices.c | 491 --------------------------- 4 files changed, 907 deletions(-) delete mode 100644 arch/arm/mach-at91/sama5d3.c delete mode 100644 arch/arm/mach-at91/sama5d3_devices.c
arch/arm/mach-at91/Kconfig +0 -5
@@ -269,10 +269,6 @@ config ARCH_AT91SAM9N12 bool "AT91SAM9N12" select SOC_AT91SAM9N12 -config ARCH_SAMA5D3 - bool "SAMA5D3x" - select SOC_SAMA5D3 - config ARCH_SAMA5D4 bool "SAMA5D4" select SOC_SAMA5D4
@@ -289,7 +285,6 @@ config ARCH_BAREBOX_MAX_BARE_INIT_SIZE default 0xF000 if ARCH_AT91SAM9G45 default 0x6000 if ARCH_AT91SAM9X5 default 0x6000 if ARCH_AT91SAM9N12 - default 0x6000 if ARCH_SAMA5D3 default 0xffffffff if ARCH_AT91RM9200
arch/arm/mach-at91/Makefile +0 -1
@@ -27,7 +27,6 @@ obj-$(CONFIG_SOC_AT91SAM9G10) += at91sam9261.o at91sam9261_devices.o ifeq ($(CONFIG_AT91_MULTI_BOARDS),) obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o at91sam9260_devices.o obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o at91sam9263_devices.o -obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o sama5d3_devices.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o sama5d4_devices.o endif lwl-$(CONFIG_SOC_AT91SAM9263) += sam9263_ll.o
arch/arm/mach-at91/sama5d3.c deleted +0 -0
arch/arm/mach-at91/sama5d3_devices.c deleted +0 -0
Signature · 1 line
2.39.1
Sascha Hauer
AppliedQuoted 4 lines · Alexander Shiyan
Since all SAMA5D3 boards now do not use the devicetree, we can safely remove the board support files for this SOC.
Applied, thanks!
[1/1] at91: Remove non-devicetree board support for SAMA5D3 SOC
https://git.pengutronix.de/cgit/barebox/commit/?id=90738596b7d4 (link may not be stable)
Best regards,
Signature · 1 line
Sascha Hauer <[email protected]>
Quoted 2 lines · Alexander Shiyan
Since all SAMA5D3 boards now do not use the devicetree, we can safely remove the board support files for this SOC.
s/do not//
I fixed that while applying.
Sascha
Quoted 57 lines
Signed-off-by Alexander Shiyan <[email protected]>--- arch/arm/mach-at91/Kconfig | 5 - arch/arm/mach-at91/Makefile | 1 - arch/arm/mach-at91/sama5d3.c | 410 ---------------------- arch/arm/mach-at91/sama5d3_devices.c | 491 --------------------------- 4 files changed, 907 deletions(-) delete mode 100644 arch/arm/mach-at91/sama5d3.c delete mode 100644 arch/arm/mach-at91/sama5d3_devices.carch/arm/mach-at91/Kconfig +0
-5@@ -269,10 +269,6 @@ config ARCH_AT91SAM9N12 bool "AT91SAM9N12" select SOC_AT91SAM9N12 -config ARCH_SAMA5D3 - bool "SAMA5D3x" - select SOC_SAMA5D3 - config ARCH_SAMA5D4 bool "SAMA5D4" select SOC_SAMA5D4@@ -289,7 +285,6 @@ config ARCH_BAREBOX_MAX_BARE_INIT_SIZE default 0xF000 if ARCH_AT91SAM9G45 default 0x6000 if ARCH_AT91SAM9X5 default 0x6000 if ARCH_AT91SAM9N12 - default 0x6000 if ARCH_SAMA5D3 default 0xffffffff if ARCH_AT91RM9200arch/arm/mach-at91/Makefile +0
-1@@ -27,7 +27,6 @@ obj-$(CONFIG_SOC_AT91SAM9G10) += at91sam9261.o at91sam9261_devices.o ifeq ($(CONFIG_AT91_MULTI_BOARDS),) obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o at91sam9260_devices.o obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o at91sam9263_devices.o -obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o sama5d3_devices.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o sama5d4_devices.o endif lwl-$(CONFIG_SOC_AT91SAM9263) += sam9263_ll.oarch/arm/mach-at91/sama5d3.c deleted +0
-0arch/arm/mach-at91/sama5d3_devices.c deleted +0
-0Signature · 1 line
2.39.1
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |