Patch "iio: dac: ad3552r: clear reset status flag" has been added to the 6.13-stable tree

This is a note to let you know that I've just added the patch titled

iio: dac: ad3552r: clear reset status flag

to the 6.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
iio-dac-ad3552r-clear-reset-status-flag.patch
and it can be found in the queue-6.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From e17b9f20da7d2bc1f48878ab2230523b2512d965 Mon Sep 17 00:00:00 2001
From: Angelo Dureghello <[email protected]>
Date: Sat, 25 Jan 2025 17:24:32 +0100
Subject: iio: dac: ad3552r: clear reset status flag

From: Angelo Dureghello <[email protected]>

commit e17b9f20da7d2bc1f48878ab2230523b2512d965 upstream.

Clear reset status flag, to keep error status register clean after reset (ad3552r manual, rev B table 38).

Reset error flag was left to 1, so debugging registers, the "Error Status Register" was dirty (0x01). It is important to clear this bit, so if there is any reset event over normal working mode, it is possible to detect it.

---
 drivers/iio/dac/ad3552r.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -410,6 +410,12 @@ static int ad3552r_reset(struct ad3552r_
 		return ret;
 	}
 
+	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
+	ret = ad3552r_write_reg(dac, AD3552R_REG_ADDR_ERR_STATUS,
+				AD3552R_MASK_RESET_STATUS);
+	if (ret)
+		return ret;
+
 	return ad3552r_update_reg_field(dac,
 					AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
 					AD3552R_MASK_ADDR_ASCENSION,

Patches currently in stable-queue which might be from [email protected] are

queue-6.13/iio-dac-ad3552r-clear-reset-status-flag.patch