mm-z3fold-remove-z3fold.patch removed from -mm tree
The quilt patch titled
Subject: mm: z3fold: remove z3fold
has been removed from the -mm tree. Its filename was
mm-z3fold-remove-z3fold.patch
This patch was dropped because it was merged into the mm-stable branch of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Yosry Ahmed <[email protected]>
Subject: mm: z3fold: remove z3fold
Date: Wed, 29 Jan 2025 18:06:31 +0000
Patch series "mm: zswap: remove z3fold and zbud", v2.
After 2 cycles of deprecating z3fold, remove it as well as zbud (rationale in specific patches).
This patch (of 2):
Z3fold has been marked as deprecated for 2 cycles and no one complained, as expected. As there are no known users, remove the code now.
---
CREDITS | 1 Documentation/mm/index.rst | 1 Documentation/mm/z3fold.rst | 28 Documentation/translations/zh_CN/mm/index.rst | 1 Documentation/translations/zh_CN/mm/z3fold.rst | 31 MAINTAINERS | 7 mm/Kconfig | 29 mm/Makefile | 1 mm/z3fold.c | 1447 --------------- 9 files changed, 1 insertion(+), 1545 deletions(-)
CREDITS renamed from CREDITS~mm-z3fold-remove-z3fold +1 -0
@@ -4311,6 +4311,7 @@ S: England N: Vitaly Wool E: [email protected] D: Maintenance and development of zswap +D: Maintenance and development of z3fold N: Chris Wright E: [email protected]
Documentation/mm/index.rst renamed from Documentation/mm/index.rst~mm-z3fold-remove-z3fold +0 -1
@@ -62,5 +62,4 @@ documentation, or deleted if it has serv unevictable-lru vmalloced-kernel-stacks vmemmap_dedup - z3fold zsmalloc
Documentation/mm/z3fold.rst deleted +0 -28
@@ -1,28 +0,0 @@ -====== -z3fold -====== - -z3fold is a special purpose allocator for storing compressed pages. -It is designed to store up to three compressed pages per physical page. -It is a zbud derivative which allows for higher compression -ratio keeping the simplicity and determinism of its predecessor. - -The main differences between z3fold and zbud are: - -* unlike zbud, z3fold allows for up to PAGE_SIZE allocations -* z3fold can hold up to 3 compressed pages in its page -* z3fold doesn't export any API itself and is thus intended to be used - via the zpool API. - -To keep the determinism and simplicity, z3fold, just like zbud, always -stores an integral number of compressed pages per page, but it can store -up to 3 pages unlike zbud which can store at most 2. Therefore the -compression ratio goes to around 2.7x while zbud's one is around 1.7x. - -Unlike zbud (but like zsmalloc for that matter) z3fold_alloc() does not -return a dereferenceable pointer. Instead, it returns an unsigned long -handle which encodes actual location of the allocated object. - -Keeping effective compression ratio close to zsmalloc's, z3fold doesn't -depend on MMU enabled and provides more predictable reclaim behavior -which makes it a better fit for small and response-critical systems.
Documentation/translations/zh_CN/mm/index.rst renamed from Documentation/translations/zh_CN/mm/index.rst~mm-z3fold-remove-z3fold +0 -1
@@ -58,7 +58,6 @@ 结构化的文档中,如果它已经� remap_file_pages split_page_table_lock vmalloced-kernel-stacks - z3fold zsmalloc TODOLIST:
Documentation/translations/zh_CN/mm/z3fold.rst deleted +0 -31
@@ -1,31 +0,0 @@ -:Original: Documentation/mm/z3fold.rst - -:翻译: - - 司延腾 Yanteng Si <[email protected]> - -:校译: - - -====== -z3fold -====== - -z3fold是一个专门用于存储压缩页的分配器。它被设计为每个物理页最多可以存储三个压缩页。 -它是zbud的衍生物,允许更高的压缩率,保持其前辈的简单性和确定性。 - -z3fold和zbud的主要区别是: - -* 与zbud不同的是,z3fold允许最大的PAGE_SIZE分配。 -* z3fold在其页面中最多可以容纳3个压缩页面 -* z3fold本身没有输出任何API,因此打算通过zpool的API来使用 - -为了保持确定性和简单性,z3fold,就像zbud一样,总是在每页存储一个整数的压缩页,但是 -它最多可以存储3页,不像zbud最多可以存储2页。因此压缩率达到2.7倍左右,而zbud的压缩 -率是1.7倍左右。 - -不像zbud(但也像zsmalloc),z3fold_alloc()那样不返回一个可重复引用的指针。相反,它 -返回一个无符号长句柄,它编码了被分配对象的实际位置。 - -保持有效的压缩率接近于zsmalloc,z3fold不依赖于MMU的启用,并提供更可预测的回收行 -为,这使得它更适合于小型和反应迅速的系统。
MAINTAINERS renamed from MAINTAINERS~mm-z3fold-remove-z3fold +0 -7
@@ -26181,13 +26181,6 @@ S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* -Z3FOLD COMPRESSED PAGE ALLOCATOR -M: Vitaly Wool <[email protected]> -R: Miaohe Lin <[email protected]> -L: [email protected] -S: Maintained -F: mm/z3fold.c - Z8530 DRIVER FOR AX.25 M: Joerg Reuter <[email protected]> L: [email protected]
mm/Kconfig renamed from mm/Kconfig~mm-z3fold-remove-z3fold +0 -29
@@ -146,15 +146,6 @@ config ZSWAP_ZPOOL_DEFAULT_ZBUD help Use the zbud allocator as the default allocator. -config ZSWAP_ZPOOL_DEFAULT_Z3FOLD_DEPRECATED - bool "z3foldi (DEPRECATED)" - select Z3FOLD_DEPRECATED - help - Use the z3fold allocator as the default allocator. - - Deprecated and scheduled for removal in a few cycles, - see CONFIG_Z3FOLD_DEPRECATED. - config ZSWAP_ZPOOL_DEFAULT_ZSMALLOC bool "zsmalloc" select ZSMALLOC
@@ -166,7 +157,6 @@ config ZSWAP_ZPOOL_DEFAULT string depends on ZSWAP default "zbud" if ZSWAP_ZPOOL_DEFAULT_ZBUD - default "z3fold" if ZSWAP_ZPOOL_DEFAULT_Z3FOLD_DEPRECATED default "zsmalloc" if ZSWAP_ZPOOL_DEFAULT_ZSMALLOC default ""
@@ -180,25 +170,6 @@ config ZBUD deterministic reclaim properties that make it preferable to a higher density approach when reclaim will be used. -config Z3FOLD_DEPRECATED - tristate "3:1 compression allocator (z3fold) (DEPRECATED)" - depends on ZSWAP - help - Deprecated and scheduled for removal in a few cycles. If you have - a good reason for using Z3FOLD over ZSMALLOC, please contact - [email protected] and the zswap maintainers. - - A special purpose allocator for storing compressed pages. - It is designed to store up to three compressed pages per physical - page. It is a ZBUD derivative so the simplicity and determinism are - still there. - -config Z3FOLD - tristate - default y if Z3FOLD_DEPRECATED=y - default m if Z3FOLD_DEPRECATED=m - depends on Z3FOLD_DEPRECATED - config ZSMALLOC tristate prompt "N:1 compression allocator (zsmalloc)" if (ZSWAP || ZRAM)
mm/Makefile renamed from mm/Makefile~mm-z3fold-remove-z3fold +0 -1
@@ -115,7 +115,6 @@ obj-$(CONFIG_MEMORY_ISOLATION) += page_i obj-$(CONFIG_ZPOOL) += zpool.o obj-$(CONFIG_ZBUD) += zbud.o obj-$(CONFIG_ZSMALLOC) += zsmalloc.o -obj-$(CONFIG_Z3FOLD) += z3fold.o obj-$(CONFIG_GENERIC_EARLY_IOREMAP) += early_ioremap.o obj-$(CONFIG_CMA) += cma.o obj-$(CONFIG_NUMA) += numa.o
mm/z3fold.c deleted +0 -1447
1,447 lines not on this page · raw message
_
Patches currently in -mm which might be from [email protected] are