Layerscape uprev to lf-6.6.52-2.2.0, initial LX2160A support

Hello,

This is logically a continuation of "[PATCH v2 00/11] Initial support for SolidRun LX2160A-CEX7":
https://lore.kernel.org/buildroot/[email protected]/

where I was requested to split out the Layerscape BSP uprev and initial LX2160A support from the more problematic Solidrun board support. But as with any splitting of a larger series, the version counter reset at v1 (which can be found here):
https://lore.kernel.org/buildroot/[email protected]/

I have tried to integrate all feedback from v1, but I did not. Yet I am submitting v2 for review as it currently is, since the amount of changes is not small, and we can take it from here.

Major change log, more details in individual patches:
- Bump Linux Factory tag to lf-6.12.3-1.0.0
- Merge pull requests submitted to fmlib, rcw, restool through Github and include them into this submission
- Support the NXP LX2160A-RDB as a vehicle for pushing this patch set forward (v1 had none)

Overview of the set:
LX2160A needs:
- qoriq-ddr-phy-binary: LX2160A-specific package added by patch 13/18
- qoriq-mc-binary: DPAA2 (Layerscape sub-architecture) specific package added by patch 14/18
- qoriq-mc-utils: DPAA2-specific package added by patch 15/18
- qoriq-restool: DPAA2-specific package added by patch 16/18
- qoriq-rcw: Layerscape-specific package, updated to latest Linux Factory BSP by patch 09/18
On top of the basic SoC support, the RDB needs:
- a package for 25GbE retimer firmware, added by patch 17/18
- board files, added by patch 18/18
Because I updated the common RCW package to the latest BSP tag, I couldn't leave the other Layerscape platforms (LS1028A, LS1043A, LS1046A) not completely updated as well. So in addition, we have:
LS1028A, which needs:
- qoriq-cadence-dp-firmware: BSP tag updated in patch 04/18
- other components (linux, u-boot, atf) updated in patch 05/18 LS1043A/LS1046A, which need:
- fmlib: DPAA1 (Layerscape sub-architecture) specific package updated by patch 10/18 to the latest BSP
- fmc: DPAA1-specific package updated by patch 11/18 to the latest BSP
- qoriq-fm-ucode: DPAA1-specific package updated by patch 12/18 to the latest BSP
- other components (linux, u-boot, atf) updated in patches 06,07,08/18

In addition to the last point. I noticed, while performing the fmc uprev, that no DPAA1 board defconfig defines it by default. To that end, I created patches 01,02,03/18 which enable it for LS1043A and LS1046A.

Disclaimer copied from original cover letter:
Although I also work at NXP, I am submitting this in a personal capacity, and for personal use.

Vladimir Oltean (18):
configs/ls1046a-frwy: enable the fmc package and dependencies configs/ls1046a-rdb: enable the fmc package and dependencies configs/ls1043a-rdb: enable the fmc package and dependencies package/qoriq-cadence-dp-firmware: sync with NXP Yocto download site configs/ls1028ardb: update to lf-6.12.3-1.0.0 tag configs/ls1046a-frwy: bump BSP tag to lf-6.12.3-1.0.0 configs/ls1046a-rdb: bump BSP tag to lf-6.12.3-1.0.0 configs/ls1043a-rdb: bump BSP tag to lf-6.12.3-1.0.0 package/qoriq-rcw: bump to lf-6.12.3-1.0.0
package/fmlib: uprev to lf-6.12.3-1.0.0
package/fmc: uprev to lf-6.12
package/qoriq-fm-ucode: uprev to lf-6.12.3-1.0.0 package/qoriq-ddr-phy-binary: new package package/qoriq-mc-binary: new package package/qoriq-mc-utils: new package package/qoriq-restool: new package package/qoriq-firmware-inphi: new package board/lx2160ardb: new platform

 DEVELOPERS                                    |   7 +
 .../arm-trusted-firmware.hash                 |   2 +-
 .../ls1028ardb/patches/linux/linux.hash       |   2 +-
 .../ls1028ardb/patches/uboot/uboot.hash       |   2 +-
 board/freescale/ls1028ardb/readme.txt         |  28 ++--
 .../arm-trusted-firmware.hash                 |   2 +-
 .../ls1043a-rdb/patches/linux/linux.hash      |   2 +-
 .../ls1043a-rdb/patches/uboot/uboot.hash      |   2 +-
 board/freescale/ls1043a-rdb/readme.txt        |  28 ++--
 .../arm-trusted-firmware.hash                 |   2 +-
 .../ls1046a-frwy/patches/linux/linux.hash     |   2 +-
 .../ls1046a-frwy/patches/uboot/uboot.hash     |   2 +-
 board/freescale/ls1046a-frwy/readme.txt       |  30 +++--
 .../arm-trusted-firmware.hash                 |   2 +-
 .../ls1046a-rdb/patches/linux/linux.hash      |   2 +-
 .../ls1046a-rdb/patches/uboot/uboot.hash      |   2 +-
 board/freescale/ls1046a-rdb/readme.txt        |  28 ++--
 board/freescale/lx2160ardb/extlinux.conf      |   4 +
 board/freescale/lx2160ardb/genimage.cfg       |  47 +++++++
 .../arm-trusted-firmware.hash                 |   2 +
 .../patches/linux-headers/linux-headers.hash  |   1 +
 .../lx2160ardb/patches/linux/linux.hash       |   2 +
 .../lx2160ardb/patches/uboot/uboot.hash       |   2 +
 board/freescale/lx2160ardb/post-build.sh      |  11 ++
 .../rcw_2200_750_3200_19_5_2_sd.rcw           |  67 ++++++++++
 board/freescale/lx2160ardb/readme.txt         | 124 ++++++++++++++++++
 .../udev/rules.d/74-dpaa2-networking.rules    |  29 ++++
 board/freescale/lx2160ardb/uboot-env.txt      |  77 +++++++++++
 configs/ls1028ardb_defconfig                  |   8 +-
 configs/ls1043a-rdb_defconfig                 |  14 +-
 configs/ls1046a-frwy_defconfig                |  14 +-
 configs/ls1046a-rdb_defconfig                 |  14 +-
 configs/lx2160ardb_defconfig                  |  57 ++++++++
 package/Config.in                             |   5 +
 package/fmc/fmc.hash                          |   2 +-
 package/fmc/fmc.mk                            |   2 +-
 ...conversion-error-and-enum-compare-wa.patch |  79 -----------
 package/fmlib/fmlib.hash                      |   2 +-
 package/fmlib/fmlib.mk                        |   2 +-
 .../qoriq-cadence-dp-firmware.hash            |   2 +-
 .../qoriq-cadence-dp-firmware.mk              |  10 +-
 package/qoriq-ddr-phy-binary/Config.in        |   6 +
 .../qoriq-ddr-phy-binary.hash                 |   3 +
 .../qoriq-ddr-phy-binary.mk                   |  18 +++
 package/qoriq-firmware-inphi/Config.in        |   7 +
 .../qoriq-firmware-inphi.hash                 |   3 +
 .../qoriq-firmware-inphi.mk                   |  18 +++
 package/qoriq-fm-ucode/qoriq-fm-ucode.hash    |   2 +-
 package/qoriq-fm-ucode/qoriq-fm-ucode.mk      |   2 +-
 package/qoriq-mc-binary/Config.in             |  55 ++++++++
 package/qoriq-mc-binary/qoriq-mc-binary.hash  |   3 +
 package/qoriq-mc-binary/qoriq-mc-binary.mk    |  29 ++++
 package/qoriq-mc-utils/Config.in              |  76 +++++++++++
 package/qoriq-mc-utils/qoriq-mc-utils.hash    |   3 +
 package/qoriq-mc-utils/qoriq-mc-utils.mk      |  41 ++++++
 package/qoriq-rcw/qoriq-rcw.hash              |   2 +-
 package/qoriq-rcw/qoriq-rcw.mk                |   2 +-
 package/qoriq-restool/Config.in               |  22 ++++
 package/qoriq-restool/qoriq-restool.hash      |   3 +
 package/qoriq-restool/qoriq-restool.mk        |  25 ++++
 60 files changed, 880 insertions(+), 162 deletions(-)
 create mode 100644 board/freescale/lx2160ardb/extlinux.conf
 create mode 100644 board/freescale/lx2160ardb/genimage.cfg
 create mode 100644 board/freescale/lx2160ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash
 create mode 120000 board/freescale/lx2160ardb/patches/linux-headers/linux-headers.hash
 create mode 100644 board/freescale/lx2160ardb/patches/linux/linux.hash
 create mode 100644 board/freescale/lx2160ardb/patches/uboot/uboot.hash
 create mode 100755 board/freescale/lx2160ardb/post-build.sh
 create mode 100644 board/freescale/lx2160ardb/rcw_2200_750_3200_19_5_2_sd.rcw
 create mode 100644 board/freescale/lx2160ardb/readme.txt
 create mode 100644 board/freescale/lx2160ardb/rootfs_overlay/etc/udev/rules.d/74-dpaa2-networking.rules
 create mode 100644 board/freescale/lx2160ardb/uboot-env.txt
 create mode 100644 configs/lx2160ardb_defconfig
 delete mode 100644 package/fmlib/0001-Fix-the-integer-conversion-error-and-enum-compare-wa.patch
 create mode 100644 package/qoriq-ddr-phy-binary/Config.in
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.hash
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.mk
 create mode 100644 package/qoriq-firmware-inphi/Config.in
 create mode 100644 package/qoriq-firmware-inphi/qoriq-firmware-inphi.hash
 create mode 100644 package/qoriq-firmware-inphi/qoriq-firmware-inphi.mk
 create mode 100644 package/qoriq-mc-binary/Config.in
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.hash
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.mk
 create mode 100644 package/qoriq-mc-utils/Config.in
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.hash
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.mk
 create mode 100644 package/qoriq-restool/Config.in
 create mode 100644 package/qoriq-restool/qoriq-restool.hash
 create mode 100644 package/qoriq-restool/qoriq-restool.mk

2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Dear Maintainers,

Vladimir has already sent a wide list that was reviewed and that seems to be OK. I hope that you can start merging the set of patches from this serie which are ok so we can focus only on the remaining ones.

It is not convenient to follow a thread that keep growing with more and more patches while a majority has already been covered.

thanks,
Vincent

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot