spi: Group CS related fields in struct spi_device

index dcc79c9af8ed..9591655cf1a6 100644
@@ -138,13 +138,6 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  * @max_speed_hz: Maximum clock rate to be used with this chip
  *	(on this board); may be changed by the device's driver.
  *	The spi_transfer.speed_hz can override this for each transfer.
- * @chip_select: Array of physical chipselect, spi->chipselect[i] gives
- *	the corresponding physical CS for logical CS i.
- * @mode: The spi mode defines how data is clocked out and in.
- *	This may be changed by the device's driver.
- *	The "active low" default for chipselect mode can be overridden
- *	(by specifying SPI_CS_HIGH) as can the "MSB first" default for
- *	each word in a transfer (by specifying SPI_LSB_FIRST).
  * @bits_per_word: Data transfers involve one or more words; word sizes
  *	like eight or 12 bits are common.  In-memory wordsizes are
  *	powers of two bytes (e.g. 20 bit samples use 32 bits).

@@ -152,6 +145,11 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  *	default (0) indicating protocol words are eight bit bytes.
  *	The spi_transfer.bits_per_word can override this for each transfer.
  * @rt: Make the pump thread real time priority.
+ * @mode: The spi mode defines how data is clocked out and in.
+ *	This may be changed by the device's driver.
+ *	The "active low" default for chipselect mode can be overridden
+ *	(by specifying SPI_CS_HIGH) as can the "MSB first" default for
+ *	each word in a transfer (by specifying SPI_LSB_FIRST).
  * @irq: Negative, or the number passed to request_irq() to receive
  *	interrupts from this device.
  * @controller_state: Controller's runtime state

@@ -164,8 +162,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  *	the device will bind to the named driver and only the named driver.
  *	Do not set directly, because core frees it; use driver_set_override() to
  *	set or clear it.
- * @cs_gpiod: Array of GPIO descriptors of the corresponding chipselect lines
- *	(optional, NULL when not using a GPIO line)
+ * @pcpu_statistics: statistics for the spi_device
  * @word_delay: delay to be inserted between consecutive
  *	words of a transfer
  * @cs_setup: delay to be introduced by the controller after CS is asserted

@@ -173,8 +170,11 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  * @cs_inactive: delay to be introduced by the controller after CS is
  *	deasserted. If @cs_change_delay is used from @spi_transfer, then the
  *	two delays will be added up.
- * @pcpu_statistics: statistics for the spi_device
+ * @chip_select: Array of physical chipselect, spi->chipselect[i] gives
+ *	the corresponding physical CS for logical CS i.
  * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array
+ * @cs_gpiod: Array of GPIO descriptors of the corresponding chipselect lines
+ *	(optional, NULL when not using a GPIO line)
  *
  * A @spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.

@@ -189,7 +189,6 @@ struct spi_device {
 	struct device		dev;
 	struct spi_controller	*controller;
 	u32			max_speed_hz;
-	u8			chip_select[SPI_CS_CNT_MAX];
 	u8			bits_per_word;
 	bool			rt;
 #define SPI_NO_TX		BIT(31)		/* No transmit wire */

@@ -220,23 +219,29 @@ struct spi_device {
 	void			*controller_data;
 	char			modalias[SPI_NAME_SIZE];
 	const char		*driver_override;
-	struct gpio_desc	*cs_gpiod[SPI_CS_GPIO_MAX];	/* Chip select gpio desc */
+
+	/* The statistics */
+	struct spi_statistics __percpu	*pcpu_statistics;
+
 	struct spi_delay	word_delay; /* Inter-word delay */
+
 	/* CS delays */
 	struct spi_delay	cs_setup;
 	struct spi_delay	cs_hold;
 	struct spi_delay	cs_inactive;
 
-	/* The statistics */
-	struct spi_statistics __percpu	*pcpu_statistics;
+	u8			chip_select[SPI_CS_CNT_MAX];
 
-	/* Bit mask of the chipselect(s) that the driver need to use from
-	 * the chipselect array.When the controller is capable to handle
+	/*
+	 * Bit mask of the chipselect(s) that the driver need to use from
+	 * the chipselect array. When the controller is capable to handle
 	 * multiple chip selects & memories are connected in parallel
 	 * then more than one bit need to be set in cs_index_mask.
 	 */
 	u32			cs_index_mask : SPI_CS_CNT_MAX;
 
+	struct gpio_desc	*cs_gpiod[SPI_CS_GPIO_MAX];	/* Chip select gpio desc */
+
 	/*
 	 * Likely need more hooks for more protocol options affecting how
 	 * the controller talks to each chip, like: