turbostat 2025.05.06 for Linux-6.15 merge
Len Brown
maintainercover turbostat 2025.05.06 for Linux-6.15 merge
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes
Please let me know if you have any troubles with turbostat.
thanks!
-Len
Len Brown
maintainerPATCH 1/10 tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
From: Len Brown <[email protected]>
The clustered uncore frequency counters, UMHz*.* should honor the --show and --hide options.
All non-specified counters should be implicityly hidden. But when --show was used, UMHz*.* showed up anyway:
$ sudo turbostat -q -S --show Busy% Busy% UMHz0.0 UMHz1.0 UMHz2.0 UMHz3.0 UMHz4.0
Indeed, there was no string that can be used to explicitly show or hide clustered uncore counters.
Even through they are dynamically probed and added, group the clustered UMHz*.* counters with the legacy built-in-counter "UncMHz" for show/hide.
turbostat --show Busy%
does not show UMHz*.*.
turbostat --show UncMHz
shows either UncMHz or UMHz*.*, if present
turbostat --hide UncMHz
hides either UncMHz or UMHz*.*, if present
--- tools/power/x86/turbostat/turbostat.8 | 1 + tools/power/x86/turbostat/turbostat.c | 13 ++++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.8 +1 -0
@@ -199,6 +199,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBUncMHz\fP per-package uncore MHz, instantaneous sample. .PP \fBUMHz1.0\fP per-package uncore MHz for domain=1 and fabric_cluster=0, instantaneous sample. System summary is the average of all packages. +For the "--show" and "--hide" options, use "UncMHz" to operate on all UMHz*.* as a group. .SH TOO MUCH INFORMATION EXAMPLE By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters. This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug.
tools/power/x86/turbostat/turbostat.c +12 -1
@@ -6703,7 +6703,18 @@ static void probe_intel_uncore_frequency_cluster(void)sprintf (path,"%s/current_freq_khz" , path_base);sprintf (name_buf,"UMHz%d.%d" , domain_id, cluster_id); -add_counter (0 , path, name_buf,0 ,SCOPE_PACKAGE ,COUNTER_K2M ,FORMAT_AVERAGE ,0 , package_id); +/* +* Once add_couter() is called, that counter is always read +* and reported -- So it is effectively (enabled & present). +* Only call add_counter() here if legacy BIC_UNCORE_MHZ (UncMHz) +* is (enabled). Since we are in this routine, we +* know we will not probe and set (present) the legacy counter. +* +* This allows "--show/--hide UncMHz" to be effective for +* the clustered MHz counters, as a group. +*/ + if BIC_IS_ENABLED(BIC_UNCORE_MHZ) + add_counter(0, path, name_buf, 0, SCOPE_PACKAGE, COUNTER_K2M, FORMAT_AVERAGE, 0, package_id);if (quiet)continue ;
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 2/10 tools/power turbostat: Allow Zero return value for some RAPL registers
From: Zhang Rui <[email protected]>
turbostat aborted with below messages on a dual-package system,
turbostat: turbostat.c:3744: rapl_counter_accumulate: Assertion `dst->unit == src->unit' failed. Aborted
This is because
1. the MSR_DRAM_PERF_STATUS returns Zero for one package, and non-Zero for another package
2. probe_msr() treats Zero return value as a failure so this feature is enabled on one package, and disabled for another package.
3. turbostat aborts because the feature is invalid on some package
Unlike the RAPL energy counter registers, MSR_DRAM_PERF_STATUS can return Zero value, and this should not be treated as a failure.
Fix the problem by allowing Zero return value for RAPL registers other than the energy counters.
--- tools/power/x86/turbostat/turbostat.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-)
tools/power/x86/turbostat/turbostat.c +18 -9
@@ -2211,7 +2211,7 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr)return 0 ; } -int probe_msr (int cpu,off_t offset) +int probe_rapl_msr (int cpu,off_t offset,int index) {ssize_t retval;unsigned long long value;
@@ -2220,13 +2220,22 @@ int probe_msr(int cpu, off_t offset) retval =pread (get_msr_fd (cpu), &value,sizeof (value), offset); -/* -* Expect MSRs to accumulate some non-zero value since the system was powered on. -* Treat zero as a read failure. -*/ -if (retval !=sizeof (value) || value ==0 ) +/* if the read failed, the probe fails */ +if (retval !=sizeof (value))return 1 ; +/* If an Energy Status Counter MSR returns 0, the probe fails */ +switch (index) { +case RAPL_RCI_INDEX_ENERGY_PKG : +case RAPL_RCI_INDEX_ENERGY_CORES : +case RAPL_RCI_INDEX_DRAM : +case RAPL_RCI_INDEX_GFX : +case RAPL_RCI_INDEX_ENERGY_PLATFORM : +if (value ==0 ) +return 1 ; + } + +/* PKG,DRAM_PERF_STATUS MSRs, can return any value */ return 0 ; }
@@ -7907,7 +7916,7 @@ void rapl_perf_init(void) rci->flags[cai->rci_index] = cai->flags;/* Use MSR for this counter */ - }else if (!no_msr && cai->msr &&probe_msr (cpu, cai->msr) ==0 ) { + }else if (!no_msr && cai->msr &&probe_rapl_msr (cpu, cai->msr, cai->rci_index) ==0 ) { rci->source[cai->rci_index] =COUNTER_SOURCE_MSR ; rci->msr[cai->rci_index] = cai->msr; rci->msr_mask[cai->rci_index] = cai->msr_mask;
@@ -8045,7 +8054,7 @@ void msr_perf_init_(void) cai->present = true;/* User MSR for this counter */ - }else if (!no_msr && cai->msr &&probe_msr (cpu, cai->msr) ==0 ) { + }else if (!no_msr && cai->msr &&probe_rapl_msr (cpu, cai->msr, cai->rci_index) ==0 ) { cci->source[cai->rci_index] =COUNTER_SOURCE_MSR ; cci->msr[cai->rci_index] = cai->msr; cci->msr_mask[cai->rci_index] = cai->msr_mask;
@@ -8159,7 +8168,7 @@ void cstate_perf_init_(bool soft_c1)/* User MSR for this counter */ }else if (!no_msr && cai->msr && pkg_cstate_limit >= cai->pkg_cstate_limit - &&probe_msr (cpu, cai->msr) ==0 ) { + &&probe_rapl_msr (cpu, cai->msr, cai->rci_index) ==0 ) { cci->source[cai->rci_index] =COUNTER_SOURCE_MSR ; cci->msr[cai->rci_index] = cai->msr; }
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 3/10 tools/power turbostat: Fix names matching
In reply to Len BrownFrom: Artem Bityutskiy <[email protected]>
Fix the 'find_msrp_by_name()' function which returns incorrect matches for cases like this:
s1 = "C1-";find_msrp_by_name(head, s1);
Inside 'find_msrp_by_name()':
...
s2 = "C1"
if !(strcnmp(s1, s2, len(s2)))
// Incorrect match! return mp;
Full strings should be match istead. Switch to 'strcmp()' to fix the problem.
--- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.c +1 -1
@@ -9612,7 +9612,7 @@ struct msr_counter *find_msrp_by_name(struct msr_counter *head, char *name)for (mp = head; mp; mp = mp->next) {if (debug)fprintf (stderr,"%s: %s %s\n" , __func__, name, mp->name); -if (!strncmp (name, mp->name,strlen (mp->name))) +if (!strcmp (name, mp->name))return mp; }return NULL ;
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 4/10 tools/power turbostat: Add idle governor statistics reporting
In reply to Len BrownFrom: Artem Bityutskiy <[email protected]>
The idle governor provides the following per-idle state sysfs files:
* above - Indicates overshoots, where a more shallow state should have been requested (if avaliale and enabled).
* below - Indicates undershoots, where a deeper state should have been requested (if available and enabled).
These files offer valuable insights into how effectively the Linux kernel idle governor selects idle states for a given workload. This commit adds support for these files in turbostat.
Expose the contents of these files with the following naming convention:
* C1: The number of times the C1 state was requested (existing counter).
* C1+: The number of times the idle governor selected C1, but a deeper idle state should have been selected instead.
* C1-: The number of times the idle governor selected C1, but a shallower idle state should have been selected instead.
--- tools/power/x86/turbostat/turbostat.8 | 4 +++ tools/power/x86/turbostat/turbostat.c | 48 ++++++++++++++++++++++----- 2 files changed, 44 insertions(+), 8 deletions(-)
tools/power/x86/turbostat/turbostat.8 +4 -0
@@ -160,6 +160,10 @@ The system configuration dump (if --quiet is not used) is followed by statistics .PP \fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system. .PP +\fBC1+, C2+, C3+...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a deeper idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/below file. +.PP +\fBC1-, C2-, C3-...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a shallower idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/above file. +.PP \fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. .PP \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters.
tools/power/x86/turbostat/turbostat.c +40 -8
78 lines not on this page · raw message
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 5/10 tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
In reply to Len BrownFrom: Justin Ernst <[email protected]>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu range contains a cpu number >= 1024:
# turbostat -c 1100-1151 "--cpu 1100-1151" malformed ...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low. For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
--- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.c +1 -1
@@ -1121,7 +1121,7 @@ void probe_platform_features(unsigned int family, unsigned int model)int backwards_count;char *progname; -#define CPU_SUBSET_MAXCPUS 1024/* need to use before probe... */ +#define CPU_SUBSET_MAXCPUS 8192/* need to use before probe... */ cpu_set_t *cpu_present_set, *cpu_possible_set, *cpu_effective_set, *cpu_allowed_set, *cpu_affinity_set, *cpu_subset;size_t cpu_present_setsize, cpu_possible_setsize, cpu_effective_setsize, cpu_allowed_setsize, cpu_affinity_setsize, cpu_subset_size;#define MAX_ADDED_THREAD_COUNTERS 24
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 6/10 tools/power turbostat: report CoreThr per measurement interval
In reply to Len BrownFrom: Len Brown <[email protected]>
The CoreThr column displays total thermal throttling events since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions. Total events since boot time are still available to the user via /sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
--- tools/power/x86/turbostat/turbostat.8 | 2 ++ tools/power/x86/turbostat/turbostat.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.8 +2 -0
@@ -172,6 +172,8 @@ The system configuration dump (if --quiet is not used) is followed by statistics .PP \fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. .PP +\fBCoreThr\fP Core Thermal Throttling events during the measurement interval. Note that events since boot can be find in /sys/devices/system/cpu/cpu*/thermal_throttle/* +.PP \fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms or /sys/class/drm/card0/gt/gt0/rc6_residency_ms or /sys/class/drm/card0/device/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver being used. .PP \fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the graphics driver being used.
tools/power/x86/turbostat/turbostat.c +1 -1
@@ -3485,7 +3485,7 @@ void delta_core(struct core_data *new, struct core_data *old) old->c6 = new->c6 - old->c6; old->c7 = new->c7 - old->c7; old->core_temp_c = new->core_temp_c; - old->core_throt_cnt = new->core_throt_cnt; + old->core_throt_cnt = new->core_throt_cnt - old->core_throt_cnt; old->mc6_us = new->mc6_us - old->mc6_us;DELTA_WRAP32 (new->core_energy.raw_value, old->core_energy.raw_value);
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 7/10 tools/power turbostat: Document GNR UncMHz domain convention
In reply to Len BrownFrom: Len Brown <[email protected]>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
--- tools/power/x86/turbostat/turbostat.8 | 1 + 1 file changed, 1 insertion(+)
tools/power/x86/turbostat/turbostat.8 +1 -0
@@ -205,6 +205,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBUncMHz\fP per-package uncore MHz, instantaneous sample. .PP \fBUMHz1.0\fP per-package uncore MHz for domain=1 and fabric_cluster=0, instantaneous sample. System summary is the average of all packages. +Intel Granite Rapids systems use domains 0-2 for CPUs, and 3-4 for IO, with cluster always 0. For the "--show" and "--hide" options, use "UncMHz" to operate on all UMHz*.* as a group. .SH TOO MUCH INFORMATION EXAMPLE By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters.
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 8/10 tools/power turbostat: Restore GFX sysfs fflush() call
In reply to Len BrownFrom: Zhang Rui <[email protected]>
Do fflush() to discard the buffered data, before each read of the graphics sysfs knobs.
--- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+)
tools/power/x86/turbostat/turbostat.c +1 -0
@@ -6039,6 +6039,7 @@ int snapshot_graphics(int idx)int retval;rewind (gfx_info[idx].fp); +fflush (gfx_info[idx].fp);switch (idx) {case GFX_rc6:
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 9/10 tools/power turbostat: re-factor sysfs code
In reply to Len BrownFrom: Len Brown <[email protected]>
Probe cpuidle "sysfs" residency and counts separately, since soon we will make one disabled on, and the other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups". since we're about to re-name some of those groups.
no functional change.
--- tools/power/x86/turbostat/turbostat.c | 31 ++++++++++++++++++--------- 1 file changed, 21 insertions(+), 10 deletions(-)
tools/power/x86/turbostat/turbostat.c +21 -10
@@ -273,10 +273,10 @@ struct msr_counter bic[] = {#define BIC_NMI (1ULL << 61)#define BIC_CPU_c1e (1ULL << 62) -#define BIC_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die) -#define BIC_THERMAL_PWR (BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__ | BIC_SysWatt) -#define BIC_FREQUENCY (BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_SAMMHz | BIC_SAMACTMHz | BIC_UNCORE_MHZ) -#define BIC_IDLE (BIC_Busy | BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6 | BIC_Diec6) +#define BIC_GROUP_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die) +#define BIC_GROUP_THERMAL_PWR (BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__ | BIC_SysWatt) +#define BIC_GROUP_FREQUENCY (BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_SAMMHz | BIC_SAMACTMHz | BIC_UNCORE_MHZ) +#define BIC_GROUP_IDLE (BIC_Busy | BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6 | BIC_Diec6)#define BIC_OTHER (BIC_IRQ | BIC_NMI | BIC_SMI | BIC_ThreadC | BIC_CoreTmp | BIC_IPC)#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC)
@@ -2354,16 +2354,16 @@ unsigned long long bic_lookup(char *name_list, enum show_hide_mode mode) retval |= ~0 ;break ; }else if (!strcmp (name_list,"topology" )) { - retval |=BIC_TOPOLOGY ; + retval |=BIC_GROUP_TOPOLOGY ;break ; }else if (!strcmp (name_list,"power" )) { - retval |=BIC_THERMAL_PWR ; + retval |=BIC_GROUP_THERMAL_PWR ;break ; }else if (!strcmp (name_list,"idle" )) { - retval |=BIC_IDLE ; + retval |=BIC_GROUP_IDLE ;break ; }else if (!strcmp (name_list,"frequency" )) { - retval |=BIC_FREQUENCY ; + retval |=BIC_GROUP_FREQUENCY ;break ; }else if (!strcmp (name_list,"other" )) { retval |=BIC_OTHER ;
@@ -10260,7 +10260,7 @@ int is_deferred_skip(char *name)return 0 ; } -void probe_sysfs (void ) +void probe_cpuidle_residency (void ) {char path[64 ];char name_buf[16 ];
@@ -10304,6 +10304,16 @@ void probe_sysfs(void)if (state < min_state) min_state = state; } +} + +void probe_cpuidle_counts (void ) +{ +char path[64 ]; +char name_buf[16 ]; +FILE *input; +int state; +int min_state =1024 , max_state =0 ; +char *sp;for (state =10 ; state >=0 ; --state) {
@@ -10602,7 +10612,8 @@ int main(int argc, char **argv)print_bootcmd (); } -probe_sysfs (); +probe_cpuidle_residency (); +probe_cpuidle_counts ();if (!getuid ())set_rlimit ();
Signature · 1 line
2.45.2
Len Brown
maintainerPATCH 10/10 tools/power turbostat: disable "cpuidle" invocation counters, by default
In reply to Len BrownFrom: Len Brown <[email protected]>
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
--- tools/power/x86/turbostat/turbostat.8 | 12 +++++----- tools/power/x86/turbostat/turbostat.c | 34 +++++++++++++++++++++------ 2 files changed, 33 insertions(+), 13 deletions(-)
tools/power/x86/turbostat/turbostat.8 +6 -6
@@ -100,7 +100,7 @@ The column name "all" can be used to enable all disabled-by-default built-in cou .PP \fB--show column\fP show only the specified built-in columns. May be invoked multiple times, or with a comma-separated list of column names. .PP -\fB--show CATEGORY --hide CATEGORY\fP Show and hide also accept a single CATEGORY of columns: "all", "topology", "idle", "frequency", "power", "sysfs", "other". +\fB--show CATEGORY --hide CATEGORY\fP Show and hide also accept a single CATEGORY of columns: "all", "topology", "idle", "frequency", "power", "cpuidle", "hwidle", "swidle", "other". "idle" (enabled by default), includes "hwidle" and "idle_pct". "cpuidle" (default disabled) includes cpuidle software invocation counters. "swidle" includes "cpuidle" plus "idle_pct". "hwidle" includes only hardware based idle residency counters. Older versions of turbostat used the term "sysfs" for what is now "swidle". .PP \fB--Dump\fP displays the raw counter values. .PP
@@ -158,15 +158,15 @@ The system configuration dump (if --quiet is not used) is followed by statistics .PP \fBSMI\fP The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs. .PP -\fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system. +\fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system. These counters are in the "cpuidle" group, which is disabled, by default. .PP -\fBC1+, C2+, C3+...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a deeper idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/below file. +\fBC1+, C2+, C3+...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a deeper idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/below file. These counters are in the "cpuidle" group, which is disabled, by default. .PP -\fBC1-, C2-, C3-...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a shallower idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/above file. +\fBC1-, C2-, C3-...\fP The idle governor idle state misprediction statistics. Inidcates the number times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have requested a shallower idle state (if it exists and enabled). These statistics come from the /sys/devices/system/cpu/cpu*/cpuidle/state*/above file. These counters are in the "cpuidle" group, which is disabled, by default. .PP -\fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. +\fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. These counters are in the "pct_idle" group, which is enabled by default. .PP -\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters. +\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters and are in the "hwidle" group, which is enabled, by default. .PP \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor. .PP
tools/power/x86/turbostat/turbostat.c +27 -7
@@ -153,7 +153,7 @@ struct msr_counter bic[] = { { 0x0, "TSC_MHz", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "IRQ", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "SMI", NULL, 32, 0, FORMAT_DELTA, NULL, 0 }, - { 0x0, "sysfs", NULL, 0, 0, 0, NULL, 0 }, + { 0x0, "cpuidle", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "CPU%c1", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "CPU%c3", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "CPU%c6", NULL, 0, 0, 0, NULL, 0 },
@@ -206,6 +206,7 @@ struct msr_counter bic[] = { { 0x0, "Sys_J", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "NMI", NULL, 0, 0, 0, NULL, 0 }, { 0x0, "CPU%c1e", NULL, 0, 0, 0, NULL, 0 }, + { 0x0, "pct_idle", NULL, 0, 0, 0, NULL, 0 }, };#define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter))
@@ -219,7 +220,7 @@ struct msr_counter bic[] = {#define BIC_TSC_MHz (1ULL << 7)#define BIC_IRQ (1ULL << 8)#define BIC_SMI (1ULL << 9) -#define BIC_sysfs (1ULL << 10) +#define BIC_cpuidle (1ULL << 10)#define BIC_CPU_c1 (1ULL << 11)#define BIC_CPU_c3 (1ULL << 12)#define BIC_CPU_c6 (1ULL << 13)
@@ -272,17 +273,20 @@ struct msr_counter bic[] = {#define BIC_Sys_J (1ULL << 60)#define BIC_NMI (1ULL << 61)#define BIC_CPU_c1e (1ULL << 62) +#define BIC_pct_idle (1ULL << 63)#define BIC_GROUP_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die)#define BIC_GROUP_THERMAL_PWR (BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__ | BIC_SysWatt)#define BIC_GROUP_FREQUENCY (BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_SAMMHz | BIC_SAMACTMHz | BIC_UNCORE_MHZ) -#define BIC_GROUP_IDLE (BIC_Busy | BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6 | BIC_Diec6) +#define BIC_GROUP_HW_IDLE (BIC_Busy | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6 | BIC_Diec6) +#define BIC_GROUP_SW_IDLE (BIC_Busy | BIC_cpuidle | BIC_pct_idle ) +#define BIC_GROUP_IDLE (BIC_GROUP_HW_IDLE | BIC_pct_idle)#define BIC_OTHER (BIC_IRQ | BIC_NMI | BIC_SMI | BIC_ThreadC | BIC_CoreTmp | BIC_IPC) -#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC) +#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC | BIC_cpuidle)unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAULT ); -unsigned long long bic_present =BIC_USEC |BIC_TOD | BIC_sysfs |BIC_APIC |BIC_X2APIC ; +unsigned long long bic_present =BIC_USEC |BIC_TOD | BIC_cpuidle | BIC_pct_idle |BIC_APIC |BIC_X2APIC ;#define DO_BIC (COUNTER_NAME ) (bic_enabled & bic_present & COUNTER_NAME)#define DO_BIC_READ (COUNTER_NAME ) (bic_present & COUNTER_NAME)
@@ -2362,6 +2366,15 @@ unsigned long long bic_lookup(char *name_list, enum show_hide_mode mode) }else if (!strcmp (name_list,"idle" )) { retval |=BIC_GROUP_IDLE ;break ; + }else if (!strcmp (name_list,"swidle" )) { + retval |=BIC_GROUP_SW_IDLE ; +break ; + }else if (!strcmp (name_list,"sysfs" )) {/* legacy compatibility */ + retval |=BIC_GROUP_SW_IDLE ; +break ; + }else if (!strcmp (name_list,"hwidle" )) { + retval |=BIC_GROUP_HW_IDLE ; +break ; }else if (!strcmp (name_list,"frequency" )) { retval |=BIC_GROUP_FREQUENCY ;break ;
@@ -2372,6 +2385,7 @@ unsigned long long bic_lookup(char *name_list, enum show_hide_mode mode) }if (i ==MAX_BIC ) { +fprintf (stderr,"deferred %s\n" , name_list);if (mode ==SHOW_LIST ) { deferred_add_names[deferred_add_index++] = name_list;if (deferred_add_index >=MAX_DEFERRED ) {
@@ -10269,6 +10283,9 @@ void probe_cpuidle_residency(void)int min_state =1024 , max_state =0 ;char *sp; +if (!DO_BIC (BIC_pct_idle)) +return ; +for (state =10 ; state >=0 ; --state) {sprintf (path,"/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name" , base_cpu, state);
@@ -10291,7 +10308,7 @@ void probe_cpuidle_residency(void)sprintf (path,"cpuidle/state%d/time" , state); -if (!DO_BIC (BIC_sysfs) && !is_deferred_add (name_buf)) +if (!DO_BIC (BIC_pct_idle) && !is_deferred_add (name_buf))continue ;if (is_deferred_skip (name_buf))
@@ -10315,6 +10332,9 @@ void probe_cpuidle_counts(void)int min_state =1024 , max_state =0 ;char *sp; +if (!DO_BIC (BIC_cpuidle)) +return ; +for (state =10 ; state >=0 ; --state) {sprintf (path,"/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name" , base_cpu, state);
@@ -10327,7 +10347,7 @@ void probe_cpuidle_counts(void)remove_underbar (name_buf); -if (!DO_BIC (BIC_sysfs) && !is_deferred_add (name_buf)) +if (!DO_BIC (BIC_cpuidle) && !is_deferred_add (name_buf))continue ;if (is_deferred_skip (name_buf))
Signature · 1 line
2.45.2