Skip to contentSkip to conversation

perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()

PATCH Applied Anand Moon 3 participants 4 messages Apr 7, 2025 – May 9, 2025

Subsystems (3)
lore
Share & tools
lore

Anand Moon

author
#0 lore raw

PATCH 1/1 perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()

The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context.

Following kernel warning and stack trace:

[   31.745138] [   T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[   31.745154] [   T2289] caller is debug_smp_processor_id+0x28/0x38
[   31.745172] [   T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[   31.745181] [   T2289] Tainted: [W]=WARN
[   31.745183] [   T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[   31.745188] [   T2289] Call trace:
[   31.745191] [   T2289]  show_stack+0x28/0x40 (C)
[   31.745199] [   T2289]  dump_stack_lvl+0x4c/0x198
[   31.745205] [   T2289]  dump_stack+0x20/0x50
[   31.745209] [   T2289]  check_preemption_disabled+0xec/0xf0
[   31.745213] [   T2289]  debug_smp_processor_id+0x28/0x38
[   31.745216] [   T2289]  meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745237] [   T2289]  g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745246] [   T2289]  platform_probe+0x98/0xe0
[   31.745254] [   T2289]  really_probe+0x144/0x3f8
[   31.745258] [   T2289]  __driver_probe_device+0xb8/0x180
[   31.745261] [   T2289]  driver_probe_device+0x54/0x268
[   31.745264] [   T2289]  __driver_attach+0x11c/0x288
[   31.745267] [   T2289]  bus_for_each_dev+0xfc/0x160
[   31.745274] [   T2289]  driver_attach+0x34/0x50
[   31.745277] [   T2289]  bus_add_driver+0x160/0x2b0
[   31.745281] [   T2289]  driver_register+0x78/0x120
[   31.745285] [   T2289]  __platform_driver_register+0x30/0x48
[   31.745288] [   T2289]  init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745298] [   T2289]  do_one_initcall+0x11c/0x438
[   31.745303] [   T2289]  do_init_module+0x68/0x228
[   31.745311] [   T2289]  load_module+0x118c/0x13a8
[   31.745315] [   T2289]  __arm64_sys_finit_module+0x274/0x390
[   31.745320] [   T2289]  invoke_syscall+0x74/0x108
[   31.745326] [   T2289]  el0_svc_common+0x90/0xf8
[   31.745330] [   T2289]  do_el0_svc+0x2c/0x48
[   31.745333] [   T2289]  el0_svc+0x60/0x150
[   31.745337] [   T2289]  el0t_64_sync_handler+0x80/0x118
[   31.745341] [   T2289]  el0t_64_sync+0x1b8/0x1c0

Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

Cc Jiucheng Xu <[email protected]>
Fixes 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
---
 drivers/perf/amlogic/meson_ddr_pmu_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/amlogic/meson_ddr_pmu_core.c +1 -1
index 07446d784a1a..c1e755c356a3 100644
@@ -511,7 +511,7 @@ int meson_ddr_pmu_create(struct platform_device *pdev)
 
 	fmt_attr_fill(pmu->info.hw_info->fmt_attr);
 
-	pmu->cpu = smp_processor_id();
+	pmu->cpu = raw_smp_processor_id();
 
 	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME);
 	if (!name)

base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8

Signature · 1 line
2.49.0
maintainer
#1 lore raw
Quoted 56 lines · Anand Moon

The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context.

Following kernel warning and stack trace:

[   31.745138] [   T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[   31.745154] [   T2289] caller is debug_smp_processor_id+0x28/0x38
[   31.745172] [   T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[   31.745181] [   T2289] Tainted: [W]=WARN
[   31.745183] [   T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[   31.745188] [   T2289] Call trace:
[   31.745191] [   T2289]  show_stack+0x28/0x40 (C)
[   31.745199] [   T2289]  dump_stack_lvl+0x4c/0x198
[   31.745205] [   T2289]  dump_stack+0x20/0x50
[   31.745209] [   T2289]  check_preemption_disabled+0xec/0xf0
[   31.745213] [   T2289]  debug_smp_processor_id+0x28/0x38
[   31.745216] [   T2289]  meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745237] [   T2289]  g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745246] [   T2289]  platform_probe+0x98/0xe0
[   31.745254] [   T2289]  really_probe+0x144/0x3f8
[   31.745258] [   T2289]  __driver_probe_device+0xb8/0x180
[   31.745261] [   T2289]  driver_probe_device+0x54/0x268
[   31.745264] [   T2289]  __driver_attach+0x11c/0x288
[   31.745267] [   T2289]  bus_for_each_dev+0xfc/0x160
[   31.745274] [   T2289]  driver_attach+0x34/0x50
[   31.745277] [   T2289]  bus_add_driver+0x160/0x2b0
[   31.745281] [   T2289]  driver_register+0x78/0x120
[   31.745285] [   T2289]  __platform_driver_register+0x30/0x48
[   31.745288] [   T2289]  init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745298] [   T2289]  do_one_initcall+0x11c/0x438
[   31.745303] [   T2289]  do_init_module+0x68/0x228
[   31.745311] [   T2289]  load_module+0x118c/0x13a8
[   31.745315] [   T2289]  __arm64_sys_finit_module+0x274/0x390
[   31.745320] [   T2289]  invoke_syscall+0x74/0x108
[   31.745326] [   T2289]  el0_svc_common+0x90/0xf8
[   31.745330] [   T2289]  do_el0_svc+0x2c/0x48
[   31.745333] [   T2289]  el0_svc+0x60/0x150
[   31.745337] [   T2289]  el0t_64_sync_handler+0x80/0x118
[   31.745341] [   T2289]  el0t_64_sync+0x1b8/0x1c0

Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

Cc Jiucheng Xu <[email protected]>
Fixes 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
---
 drivers/perf/amlogic/meson_ddr_pmu_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/amlogic/meson_ddr_pmu_core.c +0 -0
index 07446d784a1a..c1e755c356a3 100644

drivers/perf/amlogic/meson_ddr_pmu_core.c int meson_ddr_pmu_create(struct platform_device *pdev) · line 517

Quoted 8 lines
drivers/perf/amlogic/meson_ddr_pmu_core.c +1 -1
@@ -511,7 +511,7 @@ int meson_ddr_pmu_create(struct platform_device *pdev)
 
 	fmt_attr_fill(pmu->info.hw_info->fmt_attr);
 
-	pmu->cpu = smp_processor_id();
+	pmu->cpu = raw_smp_processor_id();
 
 	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME);
 	if (!name)

Bah, this follows what the other drivers are doing but I continue to dislike the races we have between CPU hotplug and perf PMU registration.

Robin -- did you have a crack at fixing that or did I dream it?

Will

#2 lore raw
Quoted 63 lines · Will Deacon
Quoted 62 lines · Anand Moon

The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context.

Following kernel warning and stack trace:

[   31.745138] [   T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[   31.745154] [   T2289] caller is debug_smp_processor_id+0x28/0x38
[   31.745172] [   T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[   31.745181] [   T2289] Tainted: [W]=WARN
[   31.745183] [   T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[   31.745188] [   T2289] Call trace:
[   31.745191] [   T2289]  show_stack+0x28/0x40 (C)
[   31.745199] [   T2289]  dump_stack_lvl+0x4c/0x198
[   31.745205] [   T2289]  dump_stack+0x20/0x50
[   31.745209] [   T2289]  check_preemption_disabled+0xec/0xf0
[   31.745213] [   T2289]  debug_smp_processor_id+0x28/0x38
[   31.745216] [   T2289]  meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745237] [   T2289]  g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745246] [   T2289]  platform_probe+0x98/0xe0
[   31.745254] [   T2289]  really_probe+0x144/0x3f8
[   31.745258] [   T2289]  __driver_probe_device+0xb8/0x180
[   31.745261] [   T2289]  driver_probe_device+0x54/0x268
[   31.745264] [   T2289]  __driver_attach+0x11c/0x288
[   31.745267] [   T2289]  bus_for_each_dev+0xfc/0x160
[   31.745274] [   T2289]  driver_attach+0x34/0x50
[   31.745277] [   T2289]  bus_add_driver+0x160/0x2b0
[   31.745281] [   T2289]  driver_register+0x78/0x120
[   31.745285] [   T2289]  __platform_driver_register+0x30/0x48
[   31.745288] [   T2289]  init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745298] [   T2289]  do_one_initcall+0x11c/0x438
[   31.745303] [   T2289]  do_init_module+0x68/0x228
[   31.745311] [   T2289]  load_module+0x118c/0x13a8
[   31.745315] [   T2289]  __arm64_sys_finit_module+0x274/0x390
[   31.745320] [   T2289]  invoke_syscall+0x74/0x108
[   31.745326] [   T2289]  el0_svc_common+0x90/0xf8
[   31.745330] [   T2289]  do_el0_svc+0x2c/0x48
[   31.745333] [   T2289]  el0_svc+0x60/0x150
[   31.745337] [   T2289]  el0t_64_sync_handler+0x80/0x118
[   31.745341] [   T2289]  el0t_64_sync+0x1b8/0x1c0

Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

Cc Jiucheng Xu <[email protected]>
Fixes 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
---
  drivers/perf/amlogic/meson_ddr_pmu_core.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/amlogic/meson_ddr_pmu_core.c +1 -1
index 07446d784a1a..c1e755c356a3 100644
@@ -511,7 +511,7 @@ int meson_ddr_pmu_create(struct platform_device *pdev)
 
  	fmt_attr_fill(pmu->info.hw_info->fmt_attr);
 
-	pmu->cpu = smp_processor_id();
+	pmu->cpu = raw_smp_processor_id();
 
Quoted 8 lines

drivers/perf/amlogic/meson_ddr_pmu_core.c int meson_ddr_pmu_create(struct platform_device *pdev) · line 517

Quoted 2 lines
drivers/perf/amlogic/meson_ddr_pmu_core.c +0 -0
  	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME);
  	if (!name)

Bah, this follows what the other drivers are doing but I continue to dislike the races we have between CPU hotplug and perf PMU registration.

Robin -- did you have a crack at fixing that or did I dream it?

I've had "Perf core should do cpu hotplug!" written on the whiteboard behind my desk for about 5 years now, does that count? :)

However my initial plan was to at least factor out some of this common boilerplate within drivers/perf itself - I currently have one WIP patch from last year making a start on that, but I reckon I can find a way to make it crucial for the other PMU driver work I've already got scheduled this quarter (assuming I win the game of whack-a-mole against IOMMU race conditions soon enough...)

Cheers,
Robin.

maintainer Applied
#3 lore raw
In reply to Anand Moon
Quoted 41 lines · Anand Moon

The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context.

Following kernel warning and stack trace:

[   31.745138] [   T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[   31.745154] [   T2289] caller is debug_smp_processor_id+0x28/0x38
[   31.745172] [   T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[   31.745181] [   T2289] Tainted: [W]=WARN
[   31.745183] [   T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[   31.745188] [   T2289] Call trace:
[   31.745191] [   T2289]  show_stack+0x28/0x40 (C)
[   31.745199] [   T2289]  dump_stack_lvl+0x4c/0x198
[   31.745205] [   T2289]  dump_stack+0x20/0x50
[   31.745209] [   T2289]  check_preemption_disabled+0xec/0xf0
[   31.745213] [   T2289]  debug_smp_processor_id+0x28/0x38
[   31.745216] [   T2289]  meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745237] [   T2289]  g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745246] [   T2289]  platform_probe+0x98/0xe0
[   31.745254] [   T2289]  really_probe+0x144/0x3f8
[   31.745258] [   T2289]  __driver_probe_device+0xb8/0x180
[   31.745261] [   T2289]  driver_probe_device+0x54/0x268
[   31.745264] [   T2289]  __driver_attach+0x11c/0x288
[   31.745267] [   T2289]  bus_for_each_dev+0xfc/0x160
[   31.745274] [   T2289]  driver_attach+0x34/0x50
[   31.745277] [   T2289]  bus_add_driver+0x160/0x2b0
[   31.745281] [   T2289]  driver_register+0x78/0x120
[   31.745285] [   T2289]  __platform_driver_register+0x30/0x48
[   31.745288] [   T2289]  init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[   31.745298] [   T2289]  do_one_initcall+0x11c/0x438
[   31.745303] [   T2289]  do_init_module+0x68/0x228
[   31.745311] [   T2289]  load_module+0x118c/0x13a8
[   31.745315] [   T2289]  __arm64_sys_finit_module+0x274/0x390
[   31.745320] [   T2289]  invoke_syscall+0x74/0x108
[   31.745326] [   T2289]  el0_svc_common+0x90/0xf8
[   31.745330] [   T2289]  do_el0_svc+0x2c/0x48
[   31.745333] [   T2289]  el0_svc+0x60/0x150
[   31.745337] [   T2289]  el0t_64_sync_handler+0x80/0x118
[   31.745341] [   T2289]  el0t_64_sync+0x1b8/0x1c0
Quoted 1 line

[...]

Applied to will (for-next/perf), thanks!

[1/1] perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()

      https://git.kernel.org/will/c/097469a2b0f1

Hopefully we can fix this properly when Robin moves the hotplug logic into perf core...

Cheers,

Signature · 5 lines
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev