Skip to contentSkip to conversation

arm64: dts: marvell: Drop unused "pinctrl-names"

PATCH In review Rob Herring (Arm) 2 participants 2 messages Apr 9, 2025 – Apr 14, 2025

Subsystems (2)
Device tree bindings Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: marvell: Drop unused "pinctrl-names"

"pinctrl-names" depends on "pinctrl-[0-9]" properties, but none are present for the pca9555 nodes.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts | 1 -
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 --
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi     | 1 -
 3 files changed, 4 deletions(-)
arch/arm64/boot/dts/marvell/armada-7040-db.dts +0 -1
index 2b5e45d2c5a6..3add6506ff20 100644
@@ -124,7 +124,6 @@ &cp0_i2c0 {
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
arch/arm64/boot/dts/marvell/armada-8040-db.dts +0 -2
index 9d45e881a97d..21ecb9c12505 100644
@@ -122,7 +122,6 @@ &cp0_i2c0 {
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;

@@ -131,7 +130,6 @@ expander0: pca9555@21 {
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
arch/arm64/boot/dts/marvell/cn9130-db.dtsi +0 -1
index be56a2336265..50e9e0724828 100644
@@ -209,7 +209,6 @@ i2c@1 {
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
Signature · 1 line
2.47.2
maintainer
#1 lore raw

Hello Rob,

Quoted 9 lines

"pinctrl-names" depends on "pinctrl-[0-9]" properties, but none are present for the pca9555 nodes.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts | 1 -
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 --
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi     | 1 -
 3 files changed, 4 deletions(-)

Applied on mvebu/dt64

Thanks,

Gregory

Quoted 48 lines
arch/arm64/boot/dts/marvell/armada-7040-db.dts +0 -1
index 2b5e45d2c5a6..3add6506ff20 100644
@@ -124,7 +124,6 @@ &cp0_i2c0 {
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
arch/arm64/boot/dts/marvell/armada-8040-db.dts +0 -2
index 9d45e881a97d..21ecb9c12505 100644
@@ -122,7 +122,6 @@ &cp0_i2c0 {
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;

@@ -131,7 +130,6 @@ expander0: pca9555@21 {
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
arch/arm64/boot/dts/marvell/cn9130-db.dtsi +0 -1
index be56a2336265..50e9e0724828 100644
@@ -209,7 +209,6 @@ i2c@1 {
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
Signature · 1 line
2.47.2
Signature · 3 lines
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com