Skip to contentSkip to conversation

ASoC: imx-card: Add NULL check in ap806_syscon_common_probe()

PATCH In review Henry Martin 2 participants 2 messages Apr 10, 2025 – Jun 21, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: imx-card: Add NULL check in ap806_syscon_common_probe()

devm_kasprintf() in ap_cp_unique_name() returns NULL when memory allocation fails. Currently, ap806_syscon_common_probe() does not check for this case, which results in a NULL pointer dereference.

Add NULL check after ap_cp_unique_name() to prevent this issue.

Fixes baf4c10f8878 ("clk: mvebu: ap806: Fix clock name for the cluster")
Fixes 33c0259092c8 ("clk: mvebu: add helper file for Armada AP and CP clocks")
---
 drivers/clk/mvebu/ap806-system-controller.c | 24 +++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/clk/mvebu/ap806-system-controller.c +24 -0
index 948bd1e71aea..1461922752e3 100644
@@ -173,6 +173,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
 	/* CPU clocks depend on the Sample At Reset configuration */
 	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail0;
+	}
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -181,6 +185,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail1;
+	}
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
@@ -190,6 +198,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
 	/* Fixed clock is always 1200 Mhz */
 	fixedclk_name = ap_cp_unique_name(dev, syscon_node, "fixed");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail2;
+	}
 	ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
 						0, 1200 * 1000 * 1000);
 	if (IS_ERR(ap806_clks[2])) {
@@ -199,6 +211,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
 	/* MSS Clock is fixed clock divided by 6 */
 	name = ap_cp_unique_name(dev, syscon_node, "mss");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail3;
+	}
 	ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name,
 						  0, 1, 6);
 	if (IS_ERR(ap806_clks[3])) {
@@ -208,6 +224,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
 	/* SDIO(/eMMC) Clock is fixed clock divided by 3 */
 	name = ap_cp_unique_name(dev, syscon_node, "sdio");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail4;
+	}
 	ap806_clks[4] = clk_register_fixed_factor(NULL, name,
 						  fixedclk_name,
 						  0, 1, 3);
@@ -218,6 +238,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
 	/* AP-DCLK(HCLK) Clock is DDR clock divided by 2 */
 	name = ap_cp_unique_name(dev, syscon_node, "ap-dclk");
+	if (!name) {
+		ret = -ENOMEM;
+		goto fail5;
+	}
 	ap806_clks[5] = clk_register_fixed_rate(dev, name, NULL, 0, dclk_freq);
 	if (IS_ERR(ap806_clks[5])) {
 		ret = PTR_ERR(ap806_clks[5]);
Signature · 1 line
2.34.1
maintainer
#1 lore raw

Quoting Henry Martin (2025-04-09 20:04:38)

Quoted 18 lines

devm_kasprintf() in ap_cp_unique_name() returns NULL when memory allocation fails. Currently, ap806_syscon_common_probe() does not check for this case, which results in a NULL pointer dereference.

Add NULL check after ap_cp_unique_name() to prevent this issue.

Fixes baf4c10f8878 ("clk: mvebu: ap806: Fix clock name for the cluster")
Fixes 33c0259092c8 ("clk: mvebu: add helper file for Armada AP and CP clocks")
---
 drivers/clk/mvebu/ap806-system-controller.c | 24 +++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/clk/mvebu/ap806-system-controller.c +0 -0
index 948bd1e71aea..1461922752e3 100644

drivers/clk/mvebu/ap806-system-controller.c static int ap806_syscon_common_probe(struct platform_device *pdev, · line 180

Quoted 8 lines
drivers/clk/mvebu/ap806-system-controller.c +4 -0
@@ -173,6 +173,10 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 
        /* CPU clocks depend on the Sample At Reset configuration */
        name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
+       if (!name) {
+               ret = -ENOMEM;
+               goto fail0;
+       }
        ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,

TL;DR: This patch is unnecessary.

If name is NULL this function will fail. See the kstrdup_const() call in __clk_register() and how it returns -ENOMEM when the copy of the init.name is NULL, which is what happens when you duplicate a NULL pointer.