thunderbolt: Use wake on connect and disconnect over suspend
Subsystems (2)
PATCH 1/1 thunderbolt: Use wake on connect and disconnect over suspend
From: Mario Limonciello <[email protected]>
Wake on connect is useful for being able to wake up a suspended laptop without opening the lid by plugging into a dock.
Add the default policy to the USB4 router when wakeup is enabled for the router. Behavior for individual ports can be controlled by port wakeup settings.
Cc Opal Voravootivat <[email protected]>
Cc Raul Rangel <[email protected]>
Cc Utkarsh Patel <[email protected]>
Cc Richard Gong <[email protected]>
Cc Sanath S <[email protected]>
Link https://lore.kernel.org/linux-usb/[email protected]/T/#m0249e8c0e1c77ec92a44a3d6c8b4a8e5a9b7114e open here
Signed-off-by Mario Limonciello <[email protected]>
--- drivers/thunderbolt/switch.c | 1 + 1 file changed, 1 insertion(+)
drivers/thunderbolt/switch.c +1 -0
@@ -3599,6 +3599,7 @@ void tb_switch_suspend(struct tb_switch *sw, bool runtime) flags |=TB_WAKE_ON_USB4 ; flags |=TB_WAKE_ON_USB3 |TB_WAKE_ON_PCIE |TB_WAKE_ON_DP ; }else if (device_may_wakeup (&sw->dev)) { + flags |=TB_WAKE_ON_CONNECT |TB_WAKE_ON_DISCONNECT ; flags |=TB_WAKE_ON_USB4 |TB_WAKE_ON_USB3 |TB_WAKE_ON_PCIE ; }
Signature · 1 line
2.43.0
Mika Westerberg
AppliedQuoted 9 lines · Mario Limonciello
From: Mario Limonciello <[email protected]>
Wake on connect is useful for being able to wake up a suspended laptop without opening the lid by plugging into a dock.
Add the default policy to the USB4 router when wakeup is enabled for the router. Behavior for individual ports can be controlled by port wakeup settings.
Quoted 7 lines
Cc Opal Voravootivat <[email protected]>Cc Raul Rangel <[email protected]>Cc Utkarsh Patel <[email protected]>Cc Richard Gong <[email protected]>Cc Sanath S <[email protected]>Link https://lore.kernel.org/linux-usb/[email protected]/T/#m0249e8c0e1c77ec92a44a3d6c8b4a8e5a9b7114e open hereSigned-off-by Mario Limonciello <[email protected]>
Applied to thunderbolt.git/next, thanks!