ASoC: rt722: fix pop noise at the beginning of headphone playback
Subsystems (3)
PATCH RESEND 1/2 ASoC: rt722: fix pop noise at the beginning of headphone playback
From: Shuming Fan <[email protected]>
This patch added the function_status check to avoid the calibration again. The codec driver reinitializes when the 'FUNCTION_NEEDS_INITIALIZATION' flag raises.
--- sound/soc/codecs/rt722-sdca-sdw.c | 8 + sound/soc/codecs/rt722-sdca.c | 285 +++++++++++++++++------------- sound/soc/codecs/rt722-sdca.h | 5 + 3 files changed, 176 insertions(+), 122 deletions(-)
sound/soc/codecs/rt722-sdca-sdw.c +8 -0
@@ -24,6 +24,7 @@ static int rt722_sdca_mbq_size(struct device *dev, unsigned int reg)case 0x2f50 :case 0x2f54 : case 0x2f58 ... 0x2f5d: +case SDW_SDCA_CTL (FUNC_NUM_JACK_CODEC ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ):case SDW_SDCA_CTL (FUNC_NUM_JACK_CODEC ,RT722_SDCA_ENT_GE49 ,RT722_SDCA_CTL_SELECTED_MODE ,0 ): case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT722_SDCA_ENT_GE49, RT722_SDCA_CTL_DETECTED_MODE,
@@ -56,6 +57,7 @@ static int rt722_sdca_mbq_size(struct device *dev, unsigned int reg) RT722_SDCA_CTL_VENDOR_DEF, 0):case SDW_SDCA_CTL (FUNC_NUM_MIC_ARRAY ,RT722_SDCA_ENT_PDE2A ,RT722_SDCA_CTL_REQ_POWER_STATE ,0 ): +case SDW_SDCA_CTL (FUNC_NUM_MIC_ARRAY ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ):case SDW_SDCA_CTL (FUNC_NUM_MIC_ARRAY ,RT722_SDCA_ENT_CS1F ,RT722_SDCA_CTL_SAMPLE_FREQ_INDEX ,0 ): case SDW_SDCA_CTL(FUNC_NUM_HID, RT722_SDCA_ENT_HID01,
@@ -70,6 +72,7 @@ static int rt722_sdca_mbq_size(struct device *dev, unsigned int reg) RT722_SDCA_CTL_VENDOR_DEF, CH_08):case SDW_SDCA_CTL (FUNC_NUM_AMP ,RT722_SDCA_ENT_PDE23 ,RT722_SDCA_CTL_REQ_POWER_STATE ,0 ): +case SDW_SDCA_CTL (FUNC_NUM_AMP ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ):case SDW_SDCA_CTL (FUNC_NUM_AMP ,RT722_SDCA_ENT_CS31 ,RT722_SDCA_CTL_SAMPLE_FREQ_INDEX ,0 ): case RT722_BUF_ADDR_HID1 ... RT722_BUF_ADDR_HID2:
@@ -150,11 +153,14 @@ static bool rt722_sdca_volatile_register(struct device *dev, unsigned int reg)switch (reg) {case 0x2f01 :case 0x2f54 : +case SDW_SDCA_CTL (FUNC_NUM_JACK_CODEC ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ):case SDW_SDCA_CTL (FUNC_NUM_JACK_CODEC ,RT722_SDCA_ENT_GE49 ,RT722_SDCA_CTL_DETECTED_MODE ,0 ): +case SDW_SDCA_CTL (FUNC_NUM_MIC_ARRAY ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ):case SDW_SDCA_CTL (FUNC_NUM_HID ,RT722_SDCA_ENT_HID01 ,RT722_SDCA_CTL_HIDTX_CURRENT_OWNER , 0) ... SDW_SDCA_CTL(FUNC_NUM_HID, RT722_SDCA_ENT_HID01,RT722_SDCA_CTL_HIDTX_MESSAGE_LENGTH ,0 ): +case SDW_SDCA_CTL (FUNC_NUM_AMP ,RT722_SDCA_ENT0 ,RT722_SDCA_CTL_FUNC_STATUS ,0 ): case RT722_BUF_ADDR_HID1 ... RT722_BUF_ADDR_HID2:case 0x2000000 :case 0x200000d :
@@ -166,6 +172,8 @@ static bool rt722_sdca_volatile_register(struct device *dev, unsigned int reg)case 0x2000084 :case 0x2000086 :case 0x3110000 : +case 0x5800003 : +case 0x5810000 :return true;default :return false;
sound/soc/codecs/rt722-sdca.c +163 -122
303 lines not on this page · raw message
sound/soc/codecs/rt722-sdca.h +5 -0
@@ -183,6 +183,7 @@ struct rt722_sdca_dmic_kctrl_priv {#define RT722_SDCA_ENT_PLATFORM_FU44 0x44#define RT722_SDCA_ENT_XU03 0x03#define RT722_SDCA_ENT_XU0D 0x0d +#define RT722_SDCA_ENT0 0x00/* RT722 SDCA control */ #define RT722_SDCA_CTL_SAMPLE_FREQ_INDEX 0x10
@@ -197,6 +198,7 @@ struct rt722_sdca_dmic_kctrl_priv {#define RT722_SDCA_CTL_REQ_POWER_STATE 0x01#define RT722_SDCA_CTL_VENDOR_DEF 0x30#define RT722_SDCA_CTL_FU_CH_GAIN 0x0b +#define RT722_SDCA_CTL_FUNC_STATUS 0x10/* RT722 SDCA channel */ #define CH_L 0x01
@@ -215,6 +217,9 @@ struct rt722_sdca_dmic_kctrl_priv {#define RT722_SDCA_RATE_96000HZ 0x0b#define RT722_SDCA_RATE_192000HZ 0x0d +/* Function_Status */ +#define FUNCTION_NEEDS_INITIALIZATION BIT(5) +enum {RT722_AIF1 ,/* For headset mic and headphone */ RT722_AIF2 ,/* For speaker */
Signature · 1 line
2.34.1
Mark Brown
maintainerQuoted 4 lines · On Wed, 16 Apr 2025 17:25:28 +0800, [email protected] wrote:
This patch added the
function_statuscheck to avoid the calibration again. The codec driver reinitializes when the 'FUNCTION_NEEDS_INITIALIZATION' flag raises.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: rt722: fix pop noise at the beginning of headphone playback
commit: 91f4ca732495ea5dad39e1b041ef0c2a6e1fe02f
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark