dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema
Subsystems (4)
Rob Herring (Arm)
maintainerPATCH v2 1/1 dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the missing "power-domains" property and "port" and "orientation-switch" properties in the child nodes.
Omit the previously deprecated properties as they aren't used anywhere.
Drop the 2nd example which was pretty much identical to the 1st example.
---
v2:
- Update reference in rockchip,dwc3.yaml
--- .../bindings/phy/phy-rockchip-typec.txt | 84 ------------- .../phy/rockchip,rk3399-typec-phy.yaml | 116 ++++++++++++++++++ .../bindings/usb/rockchip,dwc3.yaml | 2 +- 3 files changed, 117 insertions(+), 85 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt create mode 100644 Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt deleted +0 -84
@@ -1,84 +0,0 @@ -* ROCKCHIP type-c PHY ---------------------- - -Required properties: - - compatible : must be "rockchip,rk3399-typec-phy" - - reg: Address and length of the usb phy control register set - - rockchip,grf : phandle to the syscon managing the "general - register files" - - clocks : phandle + clock specifier for the phy clocks - - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref"; - - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or - <&cru SCLK_UPHY1_TCPDCORE>; - - assigned-clock-rates : the phy core clk frequency, shall be: 50000000 - - resets : a list of phandle + reset specifier pairs - - reset-names : string reset name, must be: - "uphy", "uphy-pipe", "uphy-tcphy" - -Optional properties: - - extcon : extcon specifier for the Power Delivery - -Required nodes : a sub-node is required for each port the phy provides. - The sub-node name is used to identify dp or usb3 port, - and shall be the following entries: - * "dp-port" : the name of DP port. - * "usb3-port" : the name of USB3 port. - -Required properties (port (child) node): -- #phy-cells : must be 0, See ./phy-bindings.txt for details. - -Deprecated properties, do not use in new device tree sources, these -properties are determined by the compatible value: - - rockchip,typec-conn-dir - - rockchip,usb3tousb2-en - - rockchip,external-psm - - rockchip,pipe-status - -Example: - tcphy0: phy@ff7c0000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff7c0000 0x0 0x40000>; - rockchip,grf = <&grf>; - extcon = <&fusb0>; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; - assigned-clock-rates = <50000000>; - resets = <&cru SRST_UPHY0>, - <&cru SRST_UPHY0_PIPE_L00>, - <&cru SRST_P_UPHY0_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - - tcphy0_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy0_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - tcphy1: phy@ff800000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff800000 0x0 0x40000>; - rockchip,grf = <&grf>; - extcon = <&fusb1>; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; - assigned-clock-rates = <50000000>; - resets = <&cru SRST_UPHY1>, - <&cru SRST_UPHY1_PIPE_L00>, - <&cru SRST_P_UPHY1_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - - tcphy1_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy1_usb3: usb3-port { - #phy-cells = <0>; - }; - };
Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml new file +116 -0
116 lines not on this page · raw message
Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml +1 -1
@@ -18,7 +18,7 @@ description: Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml Type-C PHY - Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt + Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml select: properties:
Signature · 1 line
2.47.2
Quoted 9 lines · Rob Herring (Arm)
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the missing "power-domains" property and "port" and "orientation-switch" properties in the child nodes.
Omit the previously deprecated properties as they aren't used anywhere.
Drop the 2nd example which was pretty much identical to the 1st example.
Signed-off-by Rob Herring (Arm) <[email protected]>
Am Mittwoch, 16. April 2025, 22:24:17 Mitteleuropäische Sommerzeit schrieb Rob Herring (Arm):
Quoted 9 lines
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the missing "power-domains" property and "port" and "orientation-switch" properties in the child nodes.
Omit the previously deprecated properties as they aren't used anywhere.
Drop the 2nd example which was pretty much identical to the 1st example.
Signed-off-by Rob Herring (Arm) <[email protected]>
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Quoted 9 lines · Rob Herring (Arm)
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the missing "power-domains" property and "port" and "orientation-switch" properties in the child nodes.
Omit the previously deprecated properties as they aren't used anywhere.
Drop the 2nd example which was pretty much identical to the 1st example.
[...]
Applied, thanks!
[1/1] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema
commit: 2063eedf3c9c4449fbf417c9b84ecd08251c3b34
Best regards,
Signature · 1 line
~Vinod