Skip to contentSkip to conversation

Hyperlaunch device tree for dom0

PATCH Superseded Alejandro Vallejo 4 participants 46 messages Apr 17, 2025 – Apr 24, 2025

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover Hyperlaunch device tree for dom0

Hi,

Here's a new version. Took a while to integrate all the feedback, but here it is.

v4 pipeline: https://gitlab.com/xen-project/people/agvallejo/xen/-/pipelines/1772300721

v3: https://lore.kernel.org/xen-devel/[email protected]/
v2: https://lore.kernel.org/xen-devel/[email protected]/
v1: https://lore.kernel.org/xen-devel/[email protected]/

Cheers,
Alejandro

========= Original cover letter:

The Hyperlaunch device tree for dom0 series is the second split out for the introduction of the Hyperlaunch domain builder logic. These changes focus on introducing the ability to express a domain configuration that is then used to populate the struct boot_domain structure for dom0. This ability to express a domain configuration provides the next step towards a general domain builder.

The splitting of Hyperlaunch into a set of series are twofold, to reduce the effort in reviewing a much larger series, and to reduce the effort in handling the knock-on effects to the construction logic from requested review changes.

Alejandro Vallejo (1):
x86/hyperlaunch: Add helpers to locate multiboot modules

Daniel P. Smith (12):
x86/boot: add cmdline to struct boot_domain
kconfig: introduce domain builder config options common/hyperlaunch: introduce the domain builder x86/hyperlaunch: initial support for hyperlaunch device tree x86/hyperlaunch: locate dom0 kernel with hyperlaunch x86/hyperlaunch: obtain cmdline from device tree x86/hyperlaunch: locate dom0 initrd with hyperlaunch x86/hyperlaunch: add domain id parsing to domain config x86/hyperlaunch: specify dom0 mode with device tree x86/hyperlaunch: add memory parsing to domain config x86/hyperlaunch: add max vcpu parsing of hyperlaunch device tree x86/hyperlaunch: add capabilities to boot domain

 xen/arch/x86/Kconfig                   |   1 +
 xen/arch/x86/dom0_build.c              |  11 +
 xen/arch/x86/hvm/dom0_build.c          |  31 +-
 xen/arch/x86/include/asm/boot-domain.h |  17 +
 xen/arch/x86/include/asm/bootinfo.h    |  10 +-
 xen/arch/x86/pv/dom0_build.c           |   4 +-
 xen/arch/x86/setup.c                   |  91 +++--
 xen/common/Kconfig                     |   5 +
 xen/common/Makefile                    |   1 +
 xen/common/domain-builder/Kconfig      |  18 +
 xen/common/domain-builder/Makefile     |   2 +
 xen/common/domain-builder/core.c       | 110 ++++++
 xen/common/domain-builder/fdt.c        | 488 +++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h        |  39 ++
 xen/include/xen/domain-builder.h       |  13 +
 xen/include/xen/libfdt/libfdt-xen.h    |  44 +++
 16 files changed, 839 insertions(+), 46 deletions(-)
 create mode 100644 xen/common/domain-builder/Kconfig
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h
Signature · 1 line
2.43.0
#1 lore raw

PATCH v4 1/13 x86/boot: add cmdline to struct boot_domain

From: "Daniel P. Smith" <[email protected]>

Add a container for the "cooked" command line for a domain. This provides for the backing memory to be directly associated with the domain being constructed. This is done in anticipation that the domain construction path may need to be invoked multiple times, thus ensuring each instance had a distinct memory allocation.

---
v4:
* Manually nullify bd->cmdline before xfree()ing cmdline.
* const-ify arguments of domain_cmdline_size()
* Add cmdline_len to pvh_load_kernel()

---
 xen/arch/x86/hvm/dom0_build.c          | 31 ++++++++--------
 xen/arch/x86/include/asm/boot-domain.h |  1 +
 xen/arch/x86/pv/dom0_build.c           |  4 +-
 xen/arch/x86/setup.c                   | 51 ++++++++++++++++++++------
 4 files changed, 57 insertions(+), 30 deletions(-)
xen/arch/x86/hvm/dom0_build.c +15 -16
index 2a094b3145..49832f921c 100644
@@ -653,7 +653,7 @@ static int __init pvh_load_kernel(
     void *image_start = image_base + image->headroom;
     unsigned long image_len = image->size;
     unsigned long initrd_len = initrd ? initrd->size : 0;
-    const char *cmdline = image->cmdline_pa ? __va(image->cmdline_pa) : NULL;
+    unsigned long cmdline_len = bd->cmdline ? strlen(bd->cmdline) + 1 : 0;
     const char *initrd_cmdline = NULL;
     struct elf_binary elf;
     struct elf_dom_parms parms;
@@ -736,8 +736,7 @@ static int __init pvh_load_kernel(
             initrd = NULL;
     }
 
-    if ( cmdline )
-        extra_space += elf_round_up(&elf, strlen(cmdline) + 1);
+    extra_space += elf_round_up(&elf, cmdline_len);
 
     last_addr = find_memory(d, &elf, extra_space);
     if ( last_addr == INVALID_PADDR )
@@ -778,21 +777,21 @@ static int __init pvh_load_kernel(
     /* Free temporary buffers. */
     free_boot_modules();
 
-    if ( cmdline != NULL )
+    rc = hvm_copy_to_guest_phys(last_addr, bd->cmdline, cmdline_len, v);
+    if ( rc )
     {
-        rc = hvm_copy_to_guest_phys(last_addr, cmdline, strlen(cmdline) + 1, v);
-        if ( rc )
-        {
-            printk("Unable to copy guest command line\n");
-            return rc;
-        }
-        start_info.cmdline_paddr = last_addr;
-        /*
-         * Round up to 32/64 bits (depending on the guest kernel bitness) so
-         * the modlist/start_info is aligned.
-         */
-        last_addr += elf_round_up(&elf, strlen(cmdline) + 1);
+        printk("Unable to copy guest command line\n");
+        return rc;
     }
+
+    start_info.cmdline_paddr = cmdline_len ? last_addr : 0;
+
+    /*
+     * Round up to 32/64 bits (depending on the guest kernel bitness) so
+     * the modlist/start_info is aligned.
+     */
+    last_addr += elf_round_up(&elf, cmdline_len);
+
     if ( initrd != NULL )
     {
         rc = hvm_copy_to_guest_phys(last_addr, &mod, sizeof(mod), v);
xen/arch/x86/include/asm/boot-domain.h +1 -0
index fcbedda0f0..d7c6042e25 100644
@@ -15,6 +15,7 @@ struct boot_domain {
 
     struct boot_module *kernel;
     struct boot_module *module;
+    const char *cmdline;
 
     struct domain *d;
 };
xen/arch/x86/pv/dom0_build.c +2 -2
index b485eea05f..e1b78d47c2 100644
@@ -972,8 +972,8 @@ static int __init dom0_construct(const struct boot_domain *bd)
     }
 
     memset(si->cmd_line, 0, sizeof(si->cmd_line));
-    if ( image->cmdline_pa )
-        strlcpy((char *)si->cmd_line, __va(image->cmdline_pa), sizeof(si->cmd_line));
+    if ( bd->cmdline )
+        strlcpy((char *)si->cmd_line, bd->cmdline, sizeof(si->cmd_line));
 
 #ifdef CONFIG_VIDEO
     if ( !pv_shim && fill_console_start_info((void *)(si + 1)) )
xen/arch/x86/setup.c +39 -12

86 lines not on this page · raw message

Signature · 1 line
2.43.0
Acked-by on v4 1/13
#2 lore raw

Re: [PATCH v4 01/13] x86/boot: add cmdline to struct boot_domain

Quoted 11 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add a container for the "cooked" command line for a domain. This provides for the backing memory to be directly associated with the domain being constructed. This is done in anticipation that the domain construction path may need to be invoked multiple times, thus ensuring each instance had a distinct memory allocation.

preferably with ...

xen/arch/x86/hvm/dom0_build.c static int __init pvh_load_kernel( · line 656

Quoted 8 lines
xen/arch/x86/hvm/dom0_build.c +1 -1
@@ -653,7 +653,7 @@ static int __init pvh_load_kernel(
     void *image_start = image_base + image->headroom;
     unsigned long image_len = image->size;
     unsigned long initrd_len = initrd ? initrd->size : 0;
-    const char *cmdline = image->cmdline_pa ? __va(image->cmdline_pa) : NULL;
+    unsigned long cmdline_len = bd->cmdline ? strlen(bd->cmdline) + 1 : 0;

... this becoming either size_t (as you have it elsewhere) or unsigned int. Happy to make the adjustment while committing, so long as you agree with either of the suggested variants.

Jan

#3 lore raw

Re: [PATCH v4 01/13] x86/boot: add cmdline to struct boot_domain

Quoted 9 lines · Jan Beulich
Quoted 8 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add a container for the "cooked" command line for a domain. This provides for the backing memory to be directly associated with the domain being constructed. This is done in anticipation that the domain construction path may need to be invoked multiple times, thus ensuring each instance had a distinct memory allocation.

Quoted 5 lines
Quoted 3 lines

Thanks,

Quoted 15 lines

preferably with ...

xen/arch/x86/hvm/dom0_build.c static int __init pvh_load_kernel( · line 656

Quoted 8 lines
xen/arch/x86/hvm/dom0_build.c +1 -1
@@ -653,7 +653,7 @@ static int __init pvh_load_kernel(
     void *image_start = image_base + image->headroom;
     unsigned long image_len = image->size;
     unsigned long initrd_len = initrd ? initrd->size : 0;
-    const char *cmdline = image->cmdline_pa ? __va(image->cmdline_pa) : NULL;
+    unsigned long cmdline_len = bd->cmdline ? strlen(bd->cmdline) + 1 : 0;

... this becoming either size_t (as you have it elsewhere) or unsigned int. Happy to make the adjustment while committing, so long as you agree with either of the suggested variants.

Quoted 1 line

Jan

Yes, sounds good. I'd rather it be size_t seeing as it's the output type of strlen()

Cheers,
Alejandro

Reviewed-by Denis Mukhin on v4 1/13
#4 lore raw

Re: [PATCH v4 01/13] x86/boot: add cmdline to struct boot_domain

In reply to Alejandro Vallejo
Quoted 11 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add a container for the "cooked" command line for a domain. This provides for the backing memory to be directly associated with the domain being constructed. This is done in anticipation that the domain construction path may need to be invoked multiple times, thus ensuring each instance had a distinct memory allocation.

Quoted 46 lines

---
v4:
* Manually nullify bd->cmdline before xfree()ing cmdline.
* const-ify arguments of domain_cmdline_size()
* Add cmdline_len to pvh_load_kernel()

---
 xen/arch/x86/hvm/dom0_build.c          | 31 ++++++++--------
 xen/arch/x86/include/asm/boot-domain.h |  1 +
 xen/arch/x86/pv/dom0_build.c           |  4 +-
 xen/arch/x86/setup.c                   | 51 ++++++++++++++++++++------
 4 files changed, 57 insertions(+), 30 deletions(-)
xen/arch/x86/hvm/dom0_build.c +4 -7
index 2a094b3145..49832f921c 100644
@@ -653,7 +653,7 @@ static int __init pvh_load_kernel(
     void *image_start = image_base + image->headroom;
     unsigned long image_len = image->size;
     unsigned long initrd_len = initrd ? initrd->size : 0;
-    const char *cmdline = image->cmdline_pa ? __va(image->cmdline_pa) : NULL;
+    unsigned long cmdline_len = bd->cmdline ? strlen(bd->cmdline) + 1 : 0;
     const char *initrd_cmdline = NULL;
     struct elf_binary elf;
     struct elf_dom_parms parms;
@@ -736,8 +736,7 @@ static int __init pvh_load_kernel(
             initrd = NULL;
     }
 
-    if ( cmdline )
-        extra_space += elf_round_up(&elf, strlen(cmdline) + 1);
+    extra_space += elf_round_up(&elf, cmdline_len);
 
     last_addr = find_memory(d, &elf, extra_space);
     if ( last_addr == INVALID_PADDR )
@@ -778,21 +777,21 @@ static int __init pvh_load_kernel(
     /* Free temporary buffers. */
     free_boot_modules();
 
-    if ( cmdline != NULL )
+    rc = hvm_copy_to_guest_phys(last_addr, bd->cmdline, cmdline_len, v);
+    if ( rc )
     {
-        rc = hvm_copy_to_guest_phys(last_addr, cmdline, strlen(cmdline) + 1, v);
-        if ( rc )
-        {

xen/arch/x86/hvm/dom0_build.c static int __init pvh_load_kernel( · line 783

Quoted 10 lines
xen/arch/x86/hvm/dom0_build.c +1 -9
-            printk("Unable to copy guest command line\n");
-            return rc;
-        }
-        start_info.cmdline_paddr = last_addr;
-        /*
-         * Round up to 32/64 bits (depending on the guest kernel bitness) so
-         * the modlist/start_info is aligned.
-         */
-        last_addr += elf_round_up(&elf, strlen(cmdline) + 1);
+        printk("Unable to copy guest command line\n");

Side note: I think it makes sense to add domain ID to all printouts in pvh_load_kernel(). E.g. block under elf_xen_parse() logs domain ID.

Quoted 138 lines
xen/arch/x86/hvm/dom0_build.c +10 -0
+        return rc;
     }
+
+    start_info.cmdline_paddr = cmdline_len ? last_addr : 0;
+
+    /*
+     * Round up to 32/64 bits (depending on the guest kernel bitness) so
+     * the modlist/start_info is aligned.
+     */
+    last_addr += elf_round_up(&elf, cmdline_len);
+
     if ( initrd != NULL )
     {
         rc = hvm_copy_to_guest_phys(last_addr, &mod, sizeof(mod), v);
xen/arch/x86/include/asm/boot-domain.h +1 -0
index fcbedda0f0..d7c6042e25 100644
@@ -15,6 +15,7 @@ struct boot_domain {
 
     struct boot_module *kernel;
     struct boot_module *module;
+    const char *cmdline;
 
     struct domain *d;
 };
xen/arch/x86/pv/dom0_build.c +2 -2
index b485eea05f..e1b78d47c2 100644
@@ -972,8 +972,8 @@ static int __init dom0_construct(const struct boot_domain *bd)
     }
 
     memset(si->cmd_line, 0, sizeof(si->cmd_line));
-    if ( image->cmdline_pa )
-        strlcpy((char *)si->cmd_line, __va(image->cmdline_pa), sizeof(si->cmd_line));
+    if ( bd->cmdline )
+        strlcpy((char *)si->cmd_line, bd->cmdline, sizeof(si->cmd_line));
 
 #ifdef CONFIG_VIDEO
     if ( !pv_shim && fill_console_start_info((void *)(si + 1)) )
xen/arch/x86/setup.c +39 -13
index 3c257f0bad..4df012460d 100644
@@ -978,10 +978,30 @@ static unsigned int __init copy_bios_e820(struct e820entry *map, unsigned int li
     return n;
 }
 
-static struct domain *__init create_dom0(struct boot_info *bi)
+static size_t __init domain_cmdline_size(const struct boot_info *bi,
+                                         const struct boot_domain *bd)
 {
-    static char __initdata cmdline[MAX_GUEST_CMDLINE];
+    size_t s = bi->kextra ? strlen(bi->kextra) : 0;
+
+    s += bd->kernel->cmdline_pa ? strlen(__va(bd->kernel->cmdline_pa)) : 0;
 
+    if ( s == 0 )
+        return s;
+
+    /*
+     * Certain parameters from the Xen command line may be added to the dom0
+     * command line. Add additional space for the possible cases along with one
+     * extra char to hold \0.
+     */
+    s += strlen(" noapic") + strlen(" acpi=") + sizeof(acpi_param) + 1;
+
+    return s;
+}
+
+static struct domain *__init create_dom0(struct boot_info *bi)
+{
+    char *cmdline = NULL;
+    size_t cmdline_size;
     struct xen_domctl_createdomain dom0_cfg = {
         .flags = IS_ENABLED(CONFIG_TBOOT) ? XEN_DOMCTL_CDF_s3_integrity : 0,
         .max_evtchn_port = -1,
@@ -1020,20 +1040,24 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( alloc_dom0_vcpu0(d) == NULL )
         panic("Error creating %pdv0\n", d);
 
-    /* Grab the DOM0 command line. */
-    if ( bd->kernel->cmdline_pa || bi->kextra )
+    cmdline_size = domain_cmdline_size(bi, bd);
+    if ( cmdline_size )
     {
+        if ( !(cmdline = xzalloc_array(char, cmdline_size)) )
+            panic("Error allocating cmdline buffer for %pd\n", d);
+
         if ( bd->kernel->cmdline_pa )
-            safe_strcpy(cmdline,
-                        cmdline_cook(__va(bd->kernel->cmdline_pa), bi->loader));
+            strlcpy(cmdline,
+                    cmdline_cook(__va(bd->kernel->cmdline_pa), bi->loader),
+                    cmdline_size);
 
         if ( bi->kextra )
             /* kextra always includes exactly one leading space. */
-            safe_strcat(cmdline, bi->kextra);
+            strlcat(cmdline, bi->kextra, cmdline_size);
 
         /* Append any extra parameters. */
         if ( skip_ioapic_setup && !strstr(cmdline, "noapic") )
-            safe_strcat(cmdline, " noapic");
+            strlcat(cmdline, " noapic", cmdline_size);
 
         if ( (strlen(acpi_param) == 0) && acpi_disabled )
         {
@@ -1043,17 +1067,20 @@ static struct domain *__init create_dom0(struct boot_info *bi)
 
         if ( (strlen(acpi_param) != 0) && !strstr(cmdline, "acpi=") )
         {
-            safe_strcat(cmdline, " acpi=");
-            safe_strcat(cmdline, acpi_param);
+            strlcat(cmdline, " acpi=", cmdline_size);
+            strlcat(cmdline, acpi_param, cmdline_size);
         }
-
-        bd->kernel->cmdline_pa = __pa(cmdline);
+        bd->kernel->cmdline_pa = 0;
+        bd->cmdline = cmdline;
     }
 
     bd->d = d;
     if ( construct_dom0(bd) != 0 )
         panic("Could not construct domain 0\n");
 
+    bd->cmdline = NULL;
+    xfree(cmdline);
+
     return d;
 }
 
--

2.43.0

#5 lore raw

Re: [PATCH v4 01/13] x86/boot: add cmdline to struct boot_domain

Quoted 9 lines · dmkhn
Quoted 8 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add a container for the "cooked" command line for a domain. This provides for the backing memory to be directly associated with the domain being constructed. This is done in anticipation that the domain construction path may need to be invoked multiple times, thus ensuring each instance had a distinct memory allocation.

Quoted 6 lines
Quoted 3 lines

Thanks

Quoted 20 lines
Quoted 20 lines
xen/arch/x86/hvm/dom0_build.c +2 -9
index 2a094b3145..49832f921c 100644
@@ -778,21 +777,21 @@ static int __init pvh_load_kernel(
     /* Free temporary buffers. */
     free_boot_modules();
 
-    if ( cmdline != NULL )
+    rc = hvm_copy_to_guest_phys(last_addr, bd->cmdline, cmdline_len, v);
+    if ( rc )
     {
-        rc = hvm_copy_to_guest_phys(last_addr, cmdline, strlen(cmdline) + 1, v);
-        if ( rc )
-        {
-            printk("Unable to copy guest command line\n");
-            return rc;
-        }
-        start_info.cmdline_paddr = last_addr;
-        /*
Quoted 8 lines

xen/arch/x86/hvm/dom0_build.c static int __init pvh_load_kernel( · line 783

Quoted 5 lines
xen/arch/x86/hvm/dom0_build.c +1 -4
-         * Round up to 32/64 bits (depending on the guest kernel bitness) so
-         * the modlist/start_info is aligned.
-         */
-        last_addr += elf_round_up(&elf, strlen(cmdline) + 1);
+        printk("Unable to copy guest command line\n");

Side note: I think it makes sense to add domain ID to all printouts in pvh_load_kernel(). E.g. block under elf_xen_parse() logs domain ID.

Sounds sensible and easy enough. Sure.

Cheers,
Alejandro

#6 lore raw

PATCH v4 2/13 kconfig: introduce domain builder config options

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Hyperlaunch domain builder will be the consolidated boot time domain building logic framework. Introduces the config option to enable this domain builder to eventually turn on the ability to load the domain configuration via a flattened device tree.

This is common code, but it's tightly integrated with boot_info, so the whole builder is gated on CONFIG_HAS_BOOT_INFO, autoselected on x86 only for the time being.

---
v4:
* Moved from arch/x86 to common/
* Present the domain builder submenu for X86 only.
* s/LIB_DEVICE_TREE/LIBFDT/
* Reworded Kconfig to be a bit more user-friendly.
* Dropped Jason's R-by, due to the new Kconfig option.

---
 xen/arch/x86/Kconfig              |  1 +
 xen/common/Kconfig                |  5 +++++
 xen/common/domain-builder/Kconfig | 18 ++++++++++++++++++
 3 files changed, 24 insertions(+)
 create mode 100644 xen/common/domain-builder/Kconfig
xen/arch/x86/Kconfig +1 -0
index de2fa37f08..67de2decc5 100644
@@ -15,6 +15,7 @@ config X86
 	select FUNCTION_ALIGNMENT_16B
 	select GENERIC_BUG_FRAME
 	select HAS_ALTERNATIVE
+	select HAS_BOOT_INFO
 	select HAS_COMPAT
 	select HAS_CPUFREQ
 	select HAS_DIT
xen/common/Kconfig +5 -0
index be28060716..5c9d4eb3ab 100644
@@ -67,6 +67,9 @@ config GENERIC_BUG_FRAME
 config HAS_ALTERNATIVE
 	bool
 
+config HAS_BOOT_INFO
+	bool
+
 config HAS_COMPAT
 	bool
 
@@ -144,6 +147,8 @@ config STATIC_MEMORY
 
 	  If unsure, say N.
 
+source "common/domain-builder/Kconfig"
+
 menu "Speculative hardening"
 
 config INDIRECT_THUNK
xen/common/domain-builder/Kconfig new file +18 -0
new file mode 100644
index 0000000000..5b137e4c2b
@@ -0,0 +1,18 @@
+
+menu "Domain Builder Features"
+depends on HAS_BOOT_INFO
+
+config DOMAIN_BUILDER
+	bool "Domain builder (UNSUPPORTED)" if UNSUPPORTED
+	select LIBFDT
+	help
+	  Xen has a built-in mechanisms to automatically construct domains
+	  (like dom0) during the boot phase. The domain builder is an enhanced
+	  form of that mechanism to enable constructing predefined domains
+	  described on a flattened device tree.
+
+	  This feature is currently experimental.
+
+	  If unsure, say N.
+
+endmenu
Signature · 1 line
2.43.0
#7 lore raw

Re: [PATCH v4 02/13] kconfig: introduce domain builder config options

xen/common/domain-builder/Kconfig line 3

Quoted 6 lines · Alejandro Vallejo
xen/common/domain-builder/Kconfig new file +3 -0
@@ -0,0 +1,18 @@
+
+menu "Domain Builder Features"
+depends on HAS_BOOT_INFO

That is, what's going to further be added here will not ...

xen/common/domain-builder/Kconfig line 5

Quoted 1 line
xen/common/domain-builder/Kconfig new file +1 -0
+config DOMAIN_BUILDER

...depend on this, but just on HAS_BOOT_INFO? Seems not very likely, but I'll be looking forward to learn what the plans are.

Also, if the entire contents here is to depend on HAS_BOOT_INFO, can't the "source" line pulling in this Kconfig be put inside "if HAS_BOOT_INFO"? That would centralize definition and use of that symbol to a single file.

xen/common/domain-builder/Kconfig line 12

Quoted 7 lines
xen/common/domain-builder/Kconfig new file +7 -0
+	bool "Domain builder (UNSUPPORTED)" if UNSUPPORTED
+	select LIBFDT
+	help
+	  Xen has a built-in mechanisms to automatically construct domains
+	  (like dom0) during the boot phase. The domain builder is an enhanced
+	  form of that mechanism to enable constructing predefined domains
+	  described on a flattened device tree.

I'm not a native speaker, but (perhaps because of that) "on" here reads odd. More logical to me would be "by" or "via".

Jan

#8 lore raw

Re: [PATCH v4 02/13] kconfig: introduce domain builder config options

Quoted 4 lines · Jan Beulich
Quoted 2 lines · Alejandro Vallejo
xen/common/domain-builder/Kconfig new file +0 -0
Quoted 10 lines

xen/common/domain-builder/Kconfig line 12

Quoted 7 lines
xen/common/domain-builder/Kconfig new file +7 -0
+	bool "Domain builder (UNSUPPORTED)" if UNSUPPORTED
+	select LIBFDT
+	help
+	  Xen has a built-in mechanisms to automatically construct domains
+	  (like dom0) during the boot phase. The domain builder is an enhanced
+	  form of that mechanism to enable constructing predefined domains
+	  described on a flattened device tree.

I'm not a native speaker, but (perhaps because of that) "on" here reads odd. More logical to me would be "by" or "via".

Yes, "by" is better.

The description is a little backwards - it should state what it is first. Maybe:

Support for constructing predefined domains described by a flattened device tree. This allows constructing multiple domains at boot time instead of being limited to a single dom0.

Regards,
Jason

#9 lore raw

Re: [PATCH v4 02/13] kconfig: introduce domain builder config options

In reply to Jan Beulich
Quoted 10 lines · Jan Beulich

xen/common/domain-builder/Kconfig line 3

Quoted 6 lines · Alejandro Vallejo
xen/common/domain-builder/Kconfig new file +3 -0
@@ -0,0 +1,18 @@
+
+menu "Domain Builder Features"
+depends on HAS_BOOT_INFO

That is, what's going to further be added here will not ...

Quoted 4 lines

xen/common/domain-builder/Kconfig line 5

Quoted 1 line
xen/common/domain-builder/Kconfig new file +1 -0
+config DOMAIN_BUILDER

...depend on this, but just on HAS_BOOT_INFO? Seems not very likely, but I'll be looking forward to learn what the plans are.

CONFIG_HAS_BOOT_INFO has nothing to do with future plans. The domain builder is tightly integrated with the boot_info infrastructure and cannot be used (or linked) unless the arch-specific definitions are present. It cannot function without it. And this movement from arch/ to common/ forces this new Kconfig to gate core.c on boot_info existing (because it's in asm/bootinfo.h atm). I _COULD_ also move the boot_info elsewhere, but without a drive to actually use it, that seems a bit pointless.

HAS_BOOT_INFO && !DOMAIN_BUILDER still links core.c, because that contains the common initialiser for boot_info.

Quoted 4 lines

Also, if the entire contents here is to depend on HAS_BOOT_INFO, can't the "source" line pulling in this Kconfig be put inside "if HAS_BOOT_INFO"? That would centralize definition and use of that symbol to a single file.

Sure.

Quoted 12 lines

xen/common/domain-builder/Kconfig line 12

Quoted 8 lines
xen/common/domain-builder/Kconfig new file +7 -0
+	bool "Domain builder (UNSUPPORTED)" if UNSUPPORTED
+	select LIBFDT
+	help
+	  Xen has a built-in mechanisms to automatically construct domains
+	  (like dom0) during the boot phase. The domain builder is an enhanced
+	  form of that mechanism to enable constructing predefined domains
+	  described on a flattened device tree.

I'm not a native speaker, but (perhaps because of that) "on" here reads odd. More logical to me would be "by" or "via".

Quoted 1 line

Jan

Yes, you're right. I just felt the previous help wasn't very helpful unless you knew in advance what you were toggling. Jason's more concrete suggestion in the following reply sounds reasonable too, so I'll just copy that on resend.

Cheers,
Alejandro

#10 lore raw

Re: [PATCH v4 02/13] kconfig: introduce domain builder config options

Quoted 25 lines · Alejandro Vallejo
Quoted 10 lines · Jan Beulich

xen/common/domain-builder/Kconfig line 3

Quoted 6 lines · Alejandro Vallejo
xen/common/domain-builder/Kconfig new file +3 -0
@@ -0,0 +1,18 @@
+
+menu "Domain Builder Features"
+depends on HAS_BOOT_INFO

That is, what's going to further be added here will not ...

Quoted 4 lines

xen/common/domain-builder/Kconfig line 5

Quoted 1 line
xen/common/domain-builder/Kconfig new file +1 -0
+config DOMAIN_BUILDER

...depend on this, but just on HAS_BOOT_INFO? Seems not very likely, but I'll be looking forward to learn what the plans are.

CONFIG_HAS_BOOT_INFO has nothing to do with future plans. The domain builder is tightly integrated with the boot_info infrastructure and cannot be used (or linked) unless the arch-specific definitions are present. It cannot function without it. And this movement from arch/ to common/ forces this new Kconfig to gate core.c on boot_info existing (because it's in asm/bootinfo.h atm). I _COULD_ also move the boot_info elsewhere, but without a drive to actually use it, that seems a bit pointless.

Quoted 2 lines

HAS_BOOT_INFO && !DOMAIN_BUILDER still links core.c, because that contains the common initialiser for boot_info.

Which, as voiced earlier, I have reservations against. The entire domain-builder/ sub-tree would imo better not be recursed into when DOMAIN_BUILDER=n.

Jan

#11 lore raw

PATCH v4 3/13 common/hyperlaunch: introduce the domain builder

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the domain builder which is capable of consuming a device tree as the first boot module. If it finds a device tree as the first boot module, it will set its type to BOOTMOD_FDT. This change only detects the boot module and continues to boot with slight change to the boot convention that the dom0 kernel is no longer first boot module but is the second.

No functional change intended.

---
v4:
* Moved from arch/x86/ to common/
* gated all of domain-builder/ on CONFIG_BOOT_INFO
* Hide the domain builder submenu for !X86
* Factor out the "hyperlaunch_enabled = false" toggle core.c
* Removed stub inline, as DCE makes it unnecessary
* Adjusted printks.

---
 xen/arch/x86/include/asm/bootinfo.h |  3 ++
 xen/arch/x86/setup.c                | 17 +++++----
 xen/common/Makefile                 |  1 +
 xen/common/domain-builder/Makefile  |  2 ++
 xen/common/domain-builder/core.c    | 56 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     | 37 +++++++++++++++++++
 xen/common/domain-builder/fdt.h     | 12 +++++++
 xen/include/xen/domain-builder.h    |  9 +++++
 8 files changed, 131 insertions(+), 6 deletions(-)
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h
xen/arch/x86/include/asm/bootinfo.h +3 -0
index 3afc214c17..82c2650fcf 100644
@@ -27,6 +27,7 @@ enum bootmod_type {
     BOOTMOD_RAMDISK,
     BOOTMOD_MICROCODE,
     BOOTMOD_XSM_POLICY,
+    BOOTMOD_FDT,
 };
 
 struct boot_module {
@@ -80,6 +81,8 @@ struct boot_info {
     paddr_t memmap_addr;
     size_t memmap_length;
 
+    bool hyperlaunch_enabled;
+
     unsigned int nr_modules;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
xen/arch/x86/setup.c +11 -6
index 4df012460d..ccc57cc70a 100644
@@ -5,6 +5,7 @@
 #include <xen/cpuidle.h>
 #include <xen/dmi.h>
 #include <xen/domain.h>
+#include <xen/domain-builder.h>
 #include <xen/domain_page.h>
 #include <xen/efi.h>
 #include <xen/err.h>
@@ -1282,9 +1283,12 @@ void asmlinkage __init noreturn __start_xen(void)
                bi->nr_modules);
     }
 
-    /* Dom0 kernel is always first */
-    bi->mods[0].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[0];
+    builder_init(bi);
+
+    /* Find first unknown boot module to use as dom0 kernel */
+    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+    bi->mods[i].type = BOOTMOD_KERNEL;
+    bi->domains[0].kernel = &bi->mods[i];
 
     if ( pvh_boot )
     {
@@ -1467,8 +1471,9 @@ void asmlinkage __init noreturn __start_xen(void)
         xen->size  = __2M_rwdata_end - _stext;
     }
 
-    bi->mods[0].headroom =
-        bzimage_headroom(bootstrap_map_bm(&bi->mods[0]), bi->mods[0].size);
+    bi->domains[0].kernel->headroom =
+        bzimage_headroom(bootstrap_map_bm(bi->domains[0].kernel),
+                         bi->domains[0].kernel->size);
     bootstrap_unmap();
 
 #ifndef highmem_start
@@ -1592,7 +1597,7 @@ void asmlinkage __init noreturn __start_xen(void)
 #endif
     }
 
-    if ( bi->mods[0].headroom && !bi->mods[0].relocated )
+    if ( bi->domains[0].kernel->headroom && !bi->domains[0].kernel->relocated )
         panic("Not enough memory to relocate the dom0 kernel image\n");
     for ( i = 0; i < bi->nr_modules; ++i )
     {
xen/common/Makefile +1 -0
index 98f0873056..565837bc71 100644
@@ -11,6 +11,7 @@ obj-$(filter-out $(CONFIG_X86),$(CONFIG_ACPI)) += device.o
 obj-$(CONFIG_HAS_DEVICE_TREE) += device-tree/
 obj-$(CONFIG_IOREQ_SERVER) += dm.o
 obj-y += domain.o
+obj-$(CONFIG_HAS_BOOT_INFO) += domain-builder/
 obj-y += event_2l.o
 obj-y += event_channel.o
 obj-$(CONFIG_EVTCHN_FIFO) += event_fifo.o
xen/common/domain-builder/Makefile new file +2 -0
new file mode 100644
index 0000000000..b10cd56b28
@@ -0,0 +1,2 @@
+obj-$(CONFIG_DOMAIN_BUILDER) += fdt.init.o
+obj-y += core.init.o
xen/common/domain-builder/core.c new file +56 -0

56 lines not on this page · raw message

xen/common/domain-builder/fdt.c new file +37 -0
new file mode 100644
index 0000000000..aaf8c1cc16
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024, Apertus Solutions, LLC
+ */
+#include <xen/err.h>
+#include <xen/init.h>
+#include <xen/lib.h>
+#include <xen/libfdt/libfdt.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#include "fdt.h"
+
+int __init has_hyperlaunch_fdt(const struct boot_info *bi)
+{
+    int ret = 0;
+    const void *fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+
+    if ( !fdt || fdt_check_header(fdt) < 0 )
+        ret = -EINVAL;
+
+    bootstrap_unmap();
+
+    return ret;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
xen/common/domain-builder/fdt.h new file +12 -0
new file mode 100644
index 0000000000..97a45a6ec4
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __XEN_DOMAIN_BUILDER_FDT_H__
+#define __XEN_DOMAIN_BUILDER_FDT_H__
+
+struct boot_info;
+
+/* hyperlaunch fdt is required to be module 0 */
+#define HYPERLAUNCH_MODULE_IDX 0
+
+int has_hyperlaunch_fdt(const struct boot_info *bi);
+
+#endif /* __XEN_DOMAIN_BUILDER_FDT_H__ */
xen/include/xen/domain-builder.h new file +9 -0
new file mode 100644
index 0000000000..ac2b84775d
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __XEN_DOMAIN_BUILDER_H__
+#define __XEN_DOMAIN_BUILDER_H__
+
+struct boot_info;
+
+void builder_init(struct boot_info *bi);
+
+#endif /* __XEN_DOMAIN_BUILDER_H__ */
Signature · 1 line
2.43.0
#12 lore raw

Re: [PATCH v4 03/13] common/hyperlaunch: introduce the domain builder

Quoted 73 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the domain builder which is capable of consuming a device tree as the first boot module. If it finds a device tree as the first boot module, it will set its type to BOOTMOD_FDT. This change only detects the boot module and continues to boot with slight change to the boot convention that the dom0 kernel is no longer first boot module but is the second.

No functional change intended.

---
v4:
* Moved from arch/x86/ to common/
* gated all of domain-builder/ on CONFIG_BOOT_INFO
* Hide the domain builder submenu for !X86
* Factor out the "hyperlaunch_enabled = false" toggle core.c
* Removed stub inline, as DCE makes it unnecessary
* Adjusted printks.

---
 xen/arch/x86/include/asm/bootinfo.h |  3 ++
 xen/arch/x86/setup.c                | 17 +++++----
 xen/common/Makefile                 |  1 +
 xen/common/domain-builder/Makefile  |  2 ++
 xen/common/domain-builder/core.c    | 56 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     | 37 +++++++++++++++++++
 xen/common/domain-builder/fdt.h     | 12 +++++++
 xen/include/xen/domain-builder.h    |  9 +++++
 8 files changed, 131 insertions(+), 6 deletions(-)
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h
xen/arch/x86/include/asm/bootinfo.h +3 -0
index 3afc214c17..82c2650fcf 100644
@@ -27,6 +27,7 @@ enum bootmod_type {
     BOOTMOD_RAMDISK,
     BOOTMOD_MICROCODE,
     BOOTMOD_XSM_POLICY,
+    BOOTMOD_FDT,
 };
 
 struct boot_module {
@@ -80,6 +81,8 @@ struct boot_info {
     paddr_t memmap_addr;
     size_t memmap_length;
 
+    bool hyperlaunch_enabled;
+
     unsigned int nr_modules;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
xen/arch/x86/setup.c +1 -0
index 4df012460d..ccc57cc70a 100644
@@ -5,6 +5,7 @@
 #include <xen/cpuidle.h>
 #include <xen/dmi.h>
 #include <xen/domain.h>
+#include <xen/domain-builder.h>
 #include <xen/domain_page.h>
 #include <xen/efi.h>
 #include <xen/err.h>
@@ -1282,9 +1283,12 @@ void asmlinkage __init noreturn __start_xen(void)
                bi->nr_modules);
     }

xen/arch/x86/setup.c void asmlinkage __init noreturn __start_xen(void) · line 1291

Quoted 10 lines
xen/arch/x86/setup.c +6 -3
 
-    /* Dom0 kernel is always first */
-    bi->mods[0].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[0];
+    builder_init(bi);
+
+    /* Find first unknown boot module to use as dom0 kernel */
+    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+    bi->mods[i].type = BOOTMOD_KERNEL;
+    bi->domains[0].kernel = &bi->mods[i];

Nit: perhaps add convenience aliases for bi->domains[0] (e.g. dom0) and for bi->mods[0] (e.g. mod)?

Quoted 58 lines
xen/arch/x86/setup.c +4 -3
     if ( pvh_boot )
     {
@@ -1467,8 +1471,9 @@ void asmlinkage __init noreturn __start_xen(void)
         xen->size  = __2M_rwdata_end - _stext;
     }
 
-    bi->mods[0].headroom =
-        bzimage_headroom(bootstrap_map_bm(&bi->mods[0]), bi->mods[0].size);
+    bi->domains[0].kernel->headroom =
+        bzimage_headroom(bootstrap_map_bm(bi->domains[0].kernel),
+                         bi->domains[0].kernel->size);
     bootstrap_unmap();
 
 #ifndef highmem_start
@@ -1592,7 +1597,7 @@ void asmlinkage __init noreturn __start_xen(void)
 #endif
     }
 
-    if ( bi->mods[0].headroom && !bi->mods[0].relocated )
+    if ( bi->domains[0].kernel->headroom && !bi->domains[0].kernel->relocated )
         panic("Not enough memory to relocate the dom0 kernel image\n");
     for ( i = 0; i < bi->nr_modules; ++i )
     {
xen/common/Makefile +1 -0
index 98f0873056..565837bc71 100644
@@ -11,6 +11,7 @@ obj-$(filter-out $(CONFIG_X86),$(CONFIG_ACPI)) += device.o
 obj-$(CONFIG_HAS_DEVICE_TREE) += device-tree/
 obj-$(CONFIG_IOREQ_SERVER) += dm.o
 obj-y += domain.o
+obj-$(CONFIG_HAS_BOOT_INFO) += domain-builder/
 obj-y += event_2l.o
 obj-y += event_channel.o
 obj-$(CONFIG_EVTCHN_FIFO) += event_fifo.o
xen/common/domain-builder/Makefile new file +2 -0
new file mode 100644
index 0000000000..b10cd56b28
@@ -0,0 +1,2 @@
+obj-$(CONFIG_DOMAIN_BUILDER) += fdt.init.o
+obj-y += core.init.o
xen/common/domain-builder/core.c new file +8 -0
new file mode 100644
index 0000000000..a5b21fc179
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024, Apertus Solutions, LLC
+ */
+#include <xen/err.h>
+#include <xen/init.h>
+#include <xen/kconfig.h>
+#include <xen/lib.h>

xen/common/domain-builder/core.c line 18

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+
+#include <asm/bootinfo.h>
+
+#include "fdt.h"
+
+void __init builder_init(struct boot_info *bi)
+{
+    bi->hyperlaunch_enabled = false;
+
+    if ( IS_ENABLED(CONFIG_DOMAIN_BUILDER) )

I would re-organize the code to remove one level of indentation, e.g.:

if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
return;

switch ( ret = has_hyperlaunch_fdt(bi) )
...

or even add #ifdef CONFIG_DOMAIN_BUILDER for builder_init() in the header file.

What do you think?

Quoted 7 lines
xen/common/domain-builder/core.c new file +7 -0
+    {
+        int ret;
+
+        switch ( ret = has_hyperlaunch_fdt(bi) )
+        {
+        case 0:
+            printk(XENLOG_DEBUG "DT found: hyperlaunch\n");

xen/common/domain-builder/core.c line 35

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+            bi->hyperlaunch_enabled = true;
+            bi->mods[0].type = BOOTMOD_FDT;
+            break;
+
+        case -EINVAL:
+            /* No DT found */
+            break;
+
+        case -ENOENT:
+        case -ENODATA:

Looks like this code accounts for the follow on change: current implementation only returns -EINVAL or 0.

Is it possible to convert has_hyperlaunch_fdt() to a simple predicate?

Quoted 33 lines
xen/common/domain-builder/core.c new file +21 -0
+            printk(XENLOG_DEBUG "DT found: non-hyperlaunch (%d)\n", ret);
+            bi->mods[0].type = BOOTMOD_FDT;
+            break;
+
+        default:
+            printk(XENLOG_ERR "unknown error (%d) checking hyperlaunch DT\n",
+                   ret);
+            break;
+        }
+    }
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
xen/common/domain-builder/fdt.c new file +6 -0
new file mode 100644
index 0000000000..aaf8c1cc16
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024, Apertus Solutions, LLC
+ */
+#include <xen/err.h>
+#include <xen/init.h>

xen/common/domain-builder/fdt.c line 16

Quoted 10 lines
xen/common/domain-builder/fdt.c new file +10 -0
+#include <xen/lib.h>
+#include <xen/libfdt/libfdt.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#include "fdt.h"
+
+int __init has_hyperlaunch_fdt(const struct boot_info *bi)

I think the function can return bool in current patch.

Quoted 58 lines
xen/common/domain-builder/fdt.c new file +21 -0
+{
+    int ret = 0;
+    const void *fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+
+    if ( !fdt || fdt_check_header(fdt) < 0 )
+        ret = -EINVAL;
+
+    bootstrap_unmap();
+
+    return ret;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
xen/common/domain-builder/fdt.h new file +12 -0
new file mode 100644
index 0000000000..97a45a6ec4
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __XEN_DOMAIN_BUILDER_FDT_H__
+#define __XEN_DOMAIN_BUILDER_FDT_H__
+
+struct boot_info;
+
+/* hyperlaunch fdt is required to be module 0 */
+#define HYPERLAUNCH_MODULE_IDX 0
+
+int has_hyperlaunch_fdt(const struct boot_info *bi);
+
+#endif /* __XEN_DOMAIN_BUILDER_FDT_H__ */
xen/include/xen/domain-builder.h new file +9 -1
new file mode 100644
index 0000000000..ac2b84775d
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __XEN_DOMAIN_BUILDER_H__
+#define __XEN_DOMAIN_BUILDER_H__
+
+struct boot_info;
+
+void builder_init(struct boot_info *bi);
+
+#endif /* __XEN_DOMAIN_BUILDER_H__ */
--

2.43.0

#13 lore raw

Re: [PATCH v4 03/13] common/hyperlaunch: introduce the domain builder

Quoted 75 lines · dmkhn
Quoted 74 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the domain builder which is capable of consuming a device tree as the first boot module. If it finds a device tree as the first boot module, it will set its type to BOOTMOD_FDT. This change only detects the boot module and continues to boot with slight change to the boot convention that the dom0 kernel is no longer first boot module but is the second.

No functional change intended.

---
v4:
* Moved from arch/x86/ to common/
* gated all of domain-builder/ on CONFIG_BOOT_INFO
* Hide the domain builder submenu for !X86
* Factor out the "hyperlaunch_enabled = false" toggle core.c
* Removed stub inline, as DCE makes it unnecessary
* Adjusted printks.

---
 xen/arch/x86/include/asm/bootinfo.h |  3 ++
 xen/arch/x86/setup.c                | 17 +++++----
 xen/common/Makefile                 |  1 +
 xen/common/domain-builder/Makefile  |  2 ++
 xen/common/domain-builder/core.c    | 56 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     | 37 +++++++++++++++++++
 xen/common/domain-builder/fdt.h     | 12 +++++++
 xen/include/xen/domain-builder.h    |  9 +++++
 8 files changed, 131 insertions(+), 6 deletions(-)
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h
xen/arch/x86/include/asm/bootinfo.h +3 -0
index 3afc214c17..82c2650fcf 100644
@@ -27,6 +27,7 @@ enum bootmod_type {
     BOOTMOD_RAMDISK,
     BOOTMOD_MICROCODE,
     BOOTMOD_XSM_POLICY,
+    BOOTMOD_FDT,
 };
 
 struct boot_module {
@@ -80,6 +81,8 @@ struct boot_info {
     paddr_t memmap_addr;
     size_t memmap_length;
 
+    bool hyperlaunch_enabled;
+
     unsigned int nr_modules;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
xen/arch/x86/setup.c +1 -0
index 4df012460d..ccc57cc70a 100644
@@ -5,6 +5,7 @@
 #include <xen/cpuidle.h>
 #include <xen/dmi.h>
 #include <xen/domain.h>
+#include <xen/domain-builder.h>
 #include <xen/domain_page.h>
 #include <xen/efi.h>
 #include <xen/err.h>
@@ -1282,9 +1283,12 @@ void asmlinkage __init noreturn __start_xen(void)
                bi->nr_modules);
     }
 
Quoted 12 lines

xen/arch/x86/setup.c void asmlinkage __init noreturn __start_xen(void) · line 1291

Quoted 9 lines
xen/arch/x86/setup.c +6 -3
-    /* Dom0 kernel is always first */
-    bi->mods[0].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[0];
+    builder_init(bi);
+
+    /* Find first unknown boot module to use as dom0 kernel */
+    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+    bi->mods[i].type = BOOTMOD_KERNEL;
+    bi->domains[0].kernel = &bi->mods[i];

Nit: perhaps add convenience aliases for bi->domains[0] (e.g. dom0) and for bi->mods[0] (e.g. mod)?

Inside the boot_info? As in separate aliasing pointers into the arrays? I'd rather not. It'd be dangerous on systems without an actual dom0.

The PV shim comes to mind, but other configurations might arise in the future where no domain holds the id of 0.

Quoted 75 lines
Quoted 59 lines
xen/arch/x86/setup.c +4 -3
     if ( pvh_boot )
     {
@@ -1467,8 +1471,9 @@ void asmlinkage __init noreturn __start_xen(void)
         xen->size  = __2M_rwdata_end - _stext;
     }
 
-    bi->mods[0].headroom =
-        bzimage_headroom(bootstrap_map_bm(&bi->mods[0]), bi->mods[0].size);
+    bi->domains[0].kernel->headroom =
+        bzimage_headroom(bootstrap_map_bm(bi->domains[0].kernel),
+                         bi->domains[0].kernel->size);
     bootstrap_unmap();
 
 #ifndef highmem_start
@@ -1592,7 +1597,7 @@ void asmlinkage __init noreturn __start_xen(void)
 #endif
     }
 
-    if ( bi->mods[0].headroom && !bi->mods[0].relocated )
+    if ( bi->domains[0].kernel->headroom && !bi->domains[0].kernel->relocated )
         panic("Not enough memory to relocate the dom0 kernel image\n");
     for ( i = 0; i < bi->nr_modules; ++i )
     {
xen/common/Makefile +1 -0
index 98f0873056..565837bc71 100644
@@ -11,6 +11,7 @@ obj-$(filter-out $(CONFIG_X86),$(CONFIG_ACPI)) += device.o
 obj-$(CONFIG_HAS_DEVICE_TREE) += device-tree/
 obj-$(CONFIG_IOREQ_SERVER) += dm.o
 obj-y += domain.o
+obj-$(CONFIG_HAS_BOOT_INFO) += domain-builder/
 obj-y += event_2l.o
 obj-y += event_channel.o
 obj-$(CONFIG_EVTCHN_FIFO) += event_fifo.o
xen/common/domain-builder/Makefile new file +2 -0
new file mode 100644
index 0000000000..b10cd56b28
@@ -0,0 +1,2 @@
+obj-$(CONFIG_DOMAIN_BUILDER) += fdt.init.o
+obj-y += core.init.o
xen/common/domain-builder/core.c new file +8 -0
new file mode 100644
index 0000000000..a5b21fc179
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024, Apertus Solutions, LLC
+ */
+#include <xen/err.h>
+#include <xen/init.h>
+#include <xen/kconfig.h>
+#include <xen/lib.h>

xen/common/domain-builder/core.c line 18

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+
+#include <asm/bootinfo.h>
+
+#include "fdt.h"
+
+void __init builder_init(struct boot_info *bi)
+{
+    bi->hyperlaunch_enabled = false;
+
+    if ( IS_ENABLED(CONFIG_DOMAIN_BUILDER) )

I would re-organize the code to remove one level of indentation, e.g.:

if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
return;

Quoted 6 lines

switch ( ret = has_hyperlaunch_fdt(bi) )
...

or even add #ifdef CONFIG_DOMAIN_BUILDER for builder_init() in the header file.

What do you think?

In this patch it sounds good, but a later patch adds more stuff at the tail of the function that must not be skipped, so it wouldn't work as-is.

Another matter is whether this function could be skipped in the "no-fdt" case, and it probably could. But I do know the longer series (big RFC from Daniel) adds more common logic present when !CONFIG_DOMAIN_BUILDER, so I'm reticent to deviate too much from it to avoid rebasing headaches.

Quoted 22 lines
Quoted 8 lines
xen/common/domain-builder/core.c new file +7 -0
+    {
+        int ret;
+
+        switch ( ret = has_hyperlaunch_fdt(bi) )
+        {
+        case 0:
+            printk(XENLOG_DEBUG "DT found: hyperlaunch\n");

xen/common/domain-builder/core.c line 35

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+            bi->hyperlaunch_enabled = true;
+            bi->mods[0].type = BOOTMOD_FDT;
+            break;
+
+        case -EINVAL:
+            /* No DT found */
+            break;
+
+        case -ENOENT:
+        case -ENODATA:

Looks like this code accounts for the follow on change: current implementation only returns -EINVAL or 0.

Quoted 1 line

Is it possible to convert has_hyperlaunch_fdt() to a simple predicate?

The function is a misnomer and it ought to change to return an enumerated type instead where it returns FDT_HYPERLAUNCH, FDT_DOM0LESS, FDT_UNKNOWN or NO_FDT. Using error codes for identification is a tad too hacky.

Cheers,
Alejandro

#14 lore raw

Re: [PATCH v4 03/13] common/hyperlaunch: introduce the domain builder

Quoted 89 lines · Alejandro Vallejo
Quoted 75 lines · dmkhn
Quoted 74 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the domain builder which is capable of consuming a device tree as the first boot module. If it finds a device tree as the first boot module, it will set its type to BOOTMOD_FDT. This change only detects the boot module and continues to boot with slight change to the boot convention that the dom0 kernel is no longer first boot module but is the second.

No functional change intended.

---
v4:
* Moved from arch/x86/ to common/
* gated all of domain-builder/ on CONFIG_BOOT_INFO
* Hide the domain builder submenu for !X86
* Factor out the "hyperlaunch_enabled = false" toggle core.c
* Removed stub inline, as DCE makes it unnecessary
* Adjusted printks.

---
 xen/arch/x86/include/asm/bootinfo.h |  3 ++
 xen/arch/x86/setup.c                | 17 +++++----
 xen/common/Makefile                 |  1 +
 xen/common/domain-builder/Makefile  |  2 ++
 xen/common/domain-builder/core.c    | 56 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     | 37 +++++++++++++++++++
 xen/common/domain-builder/fdt.h     | 12 +++++++
 xen/include/xen/domain-builder.h    |  9 +++++
 8 files changed, 131 insertions(+), 6 deletions(-)
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h
xen/arch/x86/include/asm/bootinfo.h +3 -0
index 3afc214c17..82c2650fcf 100644
@@ -27,6 +27,7 @@ enum bootmod_type {
     BOOTMOD_RAMDISK,
     BOOTMOD_MICROCODE,
     BOOTMOD_XSM_POLICY,
+    BOOTMOD_FDT,
 };
 
 struct boot_module {
@@ -80,6 +81,8 @@ struct boot_info {
     paddr_t memmap_addr;
     size_t memmap_length;
 
+    bool hyperlaunch_enabled;
+
     unsigned int nr_modules;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
xen/arch/x86/setup.c +1 -0
index 4df012460d..ccc57cc70a 100644
@@ -5,6 +5,7 @@
 #include <xen/cpuidle.h>
 #include <xen/dmi.h>
 #include <xen/domain.h>
+#include <xen/domain-builder.h>
 #include <xen/domain_page.h>
 #include <xen/efi.h>
 #include <xen/err.h>
@@ -1282,9 +1283,12 @@ void asmlinkage __init noreturn __start_xen(void)
                bi->nr_modules);
     }
 
Quoted 12 lines

xen/arch/x86/setup.c void asmlinkage __init noreturn __start_xen(void) · line 1291

Quoted 9 lines
xen/arch/x86/setup.c +6 -3
-    /* Dom0 kernel is always first */
-    bi->mods[0].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[0];
+    builder_init(bi);
+
+    /* Find first unknown boot module to use as dom0 kernel */
+    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+    bi->mods[i].type = BOOTMOD_KERNEL;
+    bi->domains[0].kernel = &bi->mods[i];

Nit: perhaps add convenience aliases for bi->domains[0] (e.g. dom0) and for bi->mods[0] (e.g. mod)?

Quoted 1 line

Inside the boot_info? As in separate aliasing pointers into the arrays?

I was thinking about local variables inside the function pointing to the bi->mods[0] and bi->domains[0].

Quoted 87 lines

I'd rather not. It'd be dangerous on systems without an actual dom0.

The PV shim comes to mind, but other configurations might arise in the future where no domain holds the id of 0.

Quoted 75 lines
Quoted 59 lines
xen/arch/x86/setup.c +4 -3
     if ( pvh_boot )
     {
@@ -1467,8 +1471,9 @@ void asmlinkage __init noreturn __start_xen(void)
         xen->size  = __2M_rwdata_end - _stext;
     }
 
-    bi->mods[0].headroom =
-        bzimage_headroom(bootstrap_map_bm(&bi->mods[0]), bi->mods[0].size);
+    bi->domains[0].kernel->headroom =
+        bzimage_headroom(bootstrap_map_bm(bi->domains[0].kernel),
+                         bi->domains[0].kernel->size);
     bootstrap_unmap();
 
 #ifndef highmem_start
@@ -1592,7 +1597,7 @@ void asmlinkage __init noreturn __start_xen(void)
 #endif
     }
 
-    if ( bi->mods[0].headroom && !bi->mods[0].relocated )
+    if ( bi->domains[0].kernel->headroom && !bi->domains[0].kernel->relocated )
         panic("Not enough memory to relocate the dom0 kernel image\n");
     for ( i = 0; i < bi->nr_modules; ++i )
     {
xen/common/Makefile +1 -0
index 98f0873056..565837bc71 100644
@@ -11,6 +11,7 @@ obj-$(filter-out $(CONFIG_X86),$(CONFIG_ACPI)) += device.o
 obj-$(CONFIG_HAS_DEVICE_TREE) += device-tree/
 obj-$(CONFIG_IOREQ_SERVER) += dm.o
 obj-y += domain.o
+obj-$(CONFIG_HAS_BOOT_INFO) += domain-builder/
 obj-y += event_2l.o
 obj-y += event_channel.o
 obj-$(CONFIG_EVTCHN_FIFO) += event_fifo.o
xen/common/domain-builder/Makefile new file +2 -0
new file mode 100644
index 0000000000..b10cd56b28
@@ -0,0 +1,2 @@
+obj-$(CONFIG_DOMAIN_BUILDER) += fdt.init.o
+obj-y += core.init.o
xen/common/domain-builder/core.c new file +8 -0
new file mode 100644
index 0000000000..a5b21fc179
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024, Apertus Solutions, LLC
+ */
+#include <xen/err.h>
+#include <xen/init.h>
+#include <xen/kconfig.h>
+#include <xen/lib.h>

xen/common/domain-builder/core.c line 18

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+
+#include <asm/bootinfo.h>
+
+#include "fdt.h"
+
+void __init builder_init(struct boot_info *bi)
+{
+    bi->hyperlaunch_enabled = false;
+
+    if ( IS_ENABLED(CONFIG_DOMAIN_BUILDER) )

I would re-organize the code to remove one level of indentation, e.g.:

if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
return;

Quoted 6 lines

switch ( ret = has_hyperlaunch_fdt(bi) )
...

or even add #ifdef CONFIG_DOMAIN_BUILDER for builder_init() in the header file.

What do you think?

Quoted 8 lines

In this patch it sounds good, but a later patch adds more stuff at the tail of the function that must not be skipped, so it wouldn't work as-is.

Another matter is whether this function could be skipped in the "no-fdt" case, and it probably could. But I do know the longer series (big RFC from Daniel) adds more common logic present when !CONFIG_DOMAIN_BUILDER, so I'm reticent to deviate too much from it to avoid rebasing headaches.

I see, thanks for clarification.

Quoted 32 lines
Quoted 23 lines
Quoted 9 lines
xen/common/domain-builder/core.c new file +7 -0
+    {
+        int ret;
+
+        switch ( ret = has_hyperlaunch_fdt(bi) )
+        {
+        case 0:
+            printk(XENLOG_DEBUG "DT found: hyperlaunch\n");

xen/common/domain-builder/core.c line 35

Quoted 10 lines
xen/common/domain-builder/core.c new file +10 -0
+            bi->hyperlaunch_enabled = true;
+            bi->mods[0].type = BOOTMOD_FDT;
+            break;
+
+        case -EINVAL:
+            /* No DT found */
+            break;
+
+        case -ENOENT:
+        case -ENODATA:

Looks like this code accounts for the follow on change: current implementation only returns -EINVAL or 0.

Quoted 1 line

Is it possible to convert has_hyperlaunch_fdt() to a simple predicate?

The function is a misnomer and it ought to change to return an enumerated type instead where it returns FDT_HYPERLAUNCH, FDT_DOM0LESS, FDT_UNKNOWN or NO_FDT. Using error codes for identification is a tad too hacky.

Cheers,
Alejandro

#15 lore raw

PATCH v4 4/13 x86/hyperlaunch: initial support for hyperlaunch device tree

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add the ability to detect both a formal hyperlaunch device tree or a dom0less device tree. If the hyperlaunch device tree is found, then count the number of domain entries, reporting an error if more than one is found.

---
v4:
* Panic if we're booting on hyperlaunch, but walking the DTB fails.
* Remove inconsequential "else" clause in fdt.c
* Remove stub, as it's not required due to DCE
* Use min() rather than open-code it

---
 xen/arch/x86/include/asm/bootinfo.h |  1 +
 xen/common/domain-builder/core.c    | 11 +++++
 xen/common/domain-builder/fdt.c     | 63 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |  1 +
 4 files changed, 76 insertions(+)
xen/arch/x86/include/asm/bootinfo.h +1 -0
index 82c2650fcf..1e3d582e45 100644
@@ -84,6 +84,7 @@ struct boot_info {
     bool hyperlaunch_enabled;
 
     unsigned int nr_modules;
+    unsigned int nr_domains;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
 };
xen/common/domain-builder/core.c +11 -0
index a5b21fc179..3b062e85ec 100644
@@ -43,6 +43,17 @@ void __init builder_init(struct boot_info *bi)
             break;
         }
     }
+
+    if ( bi->hyperlaunch_enabled )
+    {
+        int ret;
+
+        printk(XENLOG_INFO "Hyperlaunch configuration:\n");
+        if ( (ret = walk_hyperlaunch_fdt(bi)) < 0 )
+            panic("Walk of device tree failed (%d)\n", ret);
+
+        printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +63 -0

76 lines not on this page · raw message

xen/common/domain-builder/fdt.h +1 -0
index 97a45a6ec4..955aead497 100644
@@ -8,5 +8,6 @@ struct boot_info;
 #define HYPERLAUNCH_MODULE_IDX 0
 
 int has_hyperlaunch_fdt(const struct boot_info *bi);
+int walk_hyperlaunch_fdt(struct boot_info *bi);
 
 #endif /* __XEN_DOMAIN_BUILDER_FDT_H__ */
Signature · 1 line
2.43.0
#16 lore raw

Re: [PATCH v4 04/13] x86/hyperlaunch: initial support for hyperlaunch device tree

Quoted 106 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add the ability to detect both a formal hyperlaunch device tree or a dom0less device tree. If the hyperlaunch device tree is found, then count the number of domain entries, reporting an error if more than one is found.

---
v4:
* Panic if we're booting on hyperlaunch, but walking the DTB fails.
* Remove inconsequential "else" clause in fdt.c
* Remove stub, as it's not required due to DCE
* Use min() rather than open-code it

---
 xen/arch/x86/include/asm/bootinfo.h |  1 +
 xen/common/domain-builder/core.c    | 11 +++++
 xen/common/domain-builder/fdt.c     | 63 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |  1 +
 4 files changed, 76 insertions(+)
xen/arch/x86/include/asm/bootinfo.h +1 -0
index 82c2650fcf..1e3d582e45 100644
@@ -84,6 +84,7 @@ struct boot_info {
     bool hyperlaunch_enabled;
 
     unsigned int nr_modules;
+    unsigned int nr_domains;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
 };
xen/common/domain-builder/core.c +11 -0
index a5b21fc179..3b062e85ec 100644
@@ -43,6 +43,17 @@ void __init builder_init(struct boot_info *bi)
             break;
         }
     }
+
+    if ( bi->hyperlaunch_enabled )
+    {
+        int ret;
+
+        printk(XENLOG_INFO "Hyperlaunch configuration:\n");
+        if ( (ret = walk_hyperlaunch_fdt(bi)) < 0 )
+            panic("Walk of device tree failed (%d)\n", ret);
+
+        printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +35 -0
index aaf8c1cc16..b5ff8220da 100644
@@ -13,6 +13,36 @@
 
 #include "fdt.h"
 
+static int __init find_hyperlaunch_node(const void *fdt)
+{
+    int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
+
+    if ( hv_node >= 0 )
+    {
+        /* Anything other than zero indicates no match */
+        if ( fdt_node_check_compatible(fdt, hv_node, "hypervisor,xen") )
+            return -ENODATA;
+
+        return hv_node;
+    }
+    else
+    {
+        /* Look for dom0less config */
+        int node, chosen_node = fdt_path_offset(fdt, "/chosen");
+
+        if ( chosen_node < 0 )
+            return -ENOENT;
+
+        fdt_for_each_subnode(node, fdt, chosen_node)
+        {
+            if ( !fdt_node_check_compatible(fdt, node, "xen,domain") )
+                return chosen_node;
+        }
+    }
+
+    return -ENODATA;
+}
+
 int __init has_hyperlaunch_fdt(const struct boot_info *bi)
 {
     int ret = 0;
@@ -20,7 +50,40 @@ int __init has_hyperlaunch_fdt(const struct boot_info *bi)
 
     if ( !fdt || fdt_check_header(fdt) < 0 )
         ret = -EINVAL;
+    else
+        ret = find_hyperlaunch_node(fdt);
+
+    bootstrap_unmap();
+

xen/common/domain-builder/fdt.c int __init has_hyperlaunch_fdt(const struct boot_info *bi) · line 67

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+    return min(0, ret);
+}
+
+int __init walk_hyperlaunch_fdt(struct boot_info *bi)
+{
+    int ret = 0, hv_node, node;
+    const void *fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+
+    if ( unlikely(!fdt) )
+        return -EINVAL;

I think this check can be converted to ASSERT() since walk_hyperlaunch_fdt() will be called after has_hyperlaunch_fdt() where condition is checked.

Quoted 37 lines
xen/common/domain-builder/fdt.c +18 -0
+
+    hv_node = find_hyperlaunch_node(fdt);
+    if ( hv_node < 0 )
+    {
+        ret = hv_node;
+        goto err_out;
+    }
+
+    fdt_for_each_subnode(node, fdt, hv_node)
+    {
+        if ( !fdt_node_check_compatible(fdt, node, "xen,domain") )
+            bi->nr_domains++;
+    }
+
+    /* Until multi-domain construction is added, throw an error */
+    if ( bi->nr_domains != 1 )
+        printk(XENLOG_ERR "hyperlaunch only supports dom0 construction\n");
 
+ err_out:
     bootstrap_unmap();
 
     return ret;
xen/common/domain-builder/fdt.h +1 -1
index 97a45a6ec4..955aead497 100644
@@ -8,5 +8,6 @@ struct boot_info;
 #define HYPERLAUNCH_MODULE_IDX 0
 
 int has_hyperlaunch_fdt(const struct boot_info *bi);
+int walk_hyperlaunch_fdt(struct boot_info *bi);
 
 #endif /* __XEN_DOMAIN_BUILDER_FDT_H__ */
--

2.43.0

#17 lore raw

Re: [PATCH v4 04/13] x86/hyperlaunch: initial support for hyperlaunch device tree

Quoted 112 lines · dmkhn
Quoted 111 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add the ability to detect both a formal hyperlaunch device tree or a dom0less device tree. If the hyperlaunch device tree is found, then count the number of domain entries, reporting an error if more than one is found.

---
v4:
* Panic if we're booting on hyperlaunch, but walking the DTB fails.
* Remove inconsequential "else" clause in fdt.c
* Remove stub, as it's not required due to DCE
* Use min() rather than open-code it

---
 xen/arch/x86/include/asm/bootinfo.h |  1 +
 xen/common/domain-builder/core.c    | 11 +++++
 xen/common/domain-builder/fdt.c     | 63 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |  1 +
 4 files changed, 76 insertions(+)
xen/arch/x86/include/asm/bootinfo.h +1 -0
index 82c2650fcf..1e3d582e45 100644
@@ -84,6 +84,7 @@ struct boot_info {
     bool hyperlaunch_enabled;
 
     unsigned int nr_modules;
+    unsigned int nr_domains;
     struct boot_module mods[MAX_NR_BOOTMODS + 1];
     struct boot_domain domains[MAX_NR_BOOTDOMS];
 };
xen/common/domain-builder/core.c +11 -0
index a5b21fc179..3b062e85ec 100644
@@ -43,6 +43,17 @@ void __init builder_init(struct boot_info *bi)
             break;
         }
     }
+
+    if ( bi->hyperlaunch_enabled )
+    {
+        int ret;
+
+        printk(XENLOG_INFO "Hyperlaunch configuration:\n");
+        if ( (ret = walk_hyperlaunch_fdt(bi)) < 0 )
+            panic("Walk of device tree failed (%d)\n", ret);
+
+        printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +40 -0
index aaf8c1cc16..b5ff8220da 100644
@@ -13,6 +13,36 @@
 
 #include "fdt.h"
 
+static int __init find_hyperlaunch_node(const void *fdt)
+{
+    int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
+
+    if ( hv_node >= 0 )
+    {
+        /* Anything other than zero indicates no match */
+        if ( fdt_node_check_compatible(fdt, hv_node, "hypervisor,xen") )
+            return -ENODATA;
+
+        return hv_node;
+    }
+    else
+    {
+        /* Look for dom0less config */
+        int node, chosen_node = fdt_path_offset(fdt, "/chosen");
+
+        if ( chosen_node < 0 )
+            return -ENOENT;
+
+        fdt_for_each_subnode(node, fdt, chosen_node)
+        {
+            if ( !fdt_node_check_compatible(fdt, node, "xen,domain") )
+                return chosen_node;
+        }
+    }
+
+    return -ENODATA;
+}
+
 int __init has_hyperlaunch_fdt(const struct boot_info *bi)
 {
     int ret = 0;
@@ -20,7 +50,40 @@ int __init has_hyperlaunch_fdt(const struct boot_info *bi)
 
     if ( !fdt || fdt_check_header(fdt) < 0 )
         ret = -EINVAL;
+    else
+        ret = find_hyperlaunch_node(fdt);
+
+    bootstrap_unmap();
+
+    return min(0, ret);
+}
+
+int __init walk_hyperlaunch_fdt(struct boot_info *bi)
+{
Quoted 8 lines

xen/common/domain-builder/fdt.c int __init has_hyperlaunch_fdt(const struct boot_info *bi) · line 67

Quoted 5 lines
xen/common/domain-builder/fdt.c +5 -0
+    int ret = 0, hv_node, node;
+    const void *fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+
+    if ( unlikely(!fdt) )
+        return -EINVAL;

I think this check can be converted to ASSERT() since walk_hyperlaunch_fdt() will be called after has_hyperlaunch_fdt() where condition is checked.

True that.

Cheers,
Alejandro

#18 lore raw

PATCH v4 5/13 x86/hyperlaunch: Add helpers to locate multiboot modules

In reply to Alejandro Vallejo

Hyperlaunch mandates either a reg or module-index DT prop on nodes that contain `multiboot,module" under their "compatible" prop. This patch introduces a helper to generically find such index, appending the module to the list of modules if it wasn't already (i.e: because it's given via the "reg" prop).

---
v4:
* Remove stray reg prop parser in libfdt-xen.h.
* Remove fdt32_as_uX accessors.
* Brough fdt_prop_as_u32() accesor from later patches.
* So it can be used in place of a hardcoded fdt32_as_u32().
* Limited MAX_NR_BOOTMODS to INT_MAX.
* Preserved BOOTMOD_XEN on module append logic.
* Add missing bounds check to module-index parsed in multiboot module helper.
* Converted idx variable to uint32_t for better bounds checking.
* Braces from switch statement to conform to coding style.
* Added missing XENLOG_X.
* Print address_cells and size_cells on error parsing reg properties.
* Added (transient) missing declaration for extern helper.
* becomes static on the next patch.

---
 xen/common/domain-builder/fdt.c     | 162 ++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |   2 +
 xen/include/xen/domain-builder.h    |   3 +
 xen/include/xen/libfdt/libfdt-xen.h |  11 ++
 4 files changed, 178 insertions(+)
xen/common/domain-builder/fdt.c +162 -0
index b5ff8220da..d73536fed6 100644
@@ -13,6 +13,168 @@
 
 #include "fdt.h"
 
+/*
+ * Unpacks a "reg" property into its address and size constituents.
+ *
+ * @param prop          Pointer to an FDT "reg" property.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param p_addr[out]   Address encoded in the property.
+ * @param p_size[out]   Size encoded in the property.
+ * @returns             -EINVAL on malformed property, 0 otherwise.
+ */
+static int __init read_fdt_prop_as_reg(const struct fdt_property *prop,
+                                       int address_cells, int size_cells,
+                                       uint64_t *p_addr, uint64_t *p_size)
+{
+    const fdt32_t *cell = (const fdt32_t *)prop->data;
+    uint64_t addr, size;
+
+    if ( fdt32_to_cpu(prop->len) !=
+         (address_cells + size_cells) * sizeof(*cell) )
+    {
+        printk(XENLOG_ERR "  cannot read reg %lu+%lu from prop len %u\n",
+            address_cells * sizeof(*cell), size_cells * sizeof(*cell),
+            fdt32_to_cpu(prop->len));
+        return -EINVAL;
+    }
+
+    switch ( address_cells )
+    {
+    case 1:
+        addr = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        addr = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported address_cells=%d\n", address_cells);
+        return -EINVAL;
+    }
+
+    cell += address_cells;
+    switch ( size_cells )
+    {
+    case 1:
+        size = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        size = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported size_cells=%d\n", size_cells);
+        return -EINVAL;
+    }
+
+    *p_addr = addr;
+    *p_size = size;
+
+    return 0;
+}
+
+/*
+ * Locate a multiboot module given its node offset in the FDT.
+ *
+ * The module location may be given via either FDT property:
+ *     * reg = <address, size>
+ *         * Mutates `bi` to append the module.
+ *     * module-index = <idx>
+ *         * Leaves `bi` unchanged.
+ *
+ * @param fdt           Pointer to the full FDT.
+ * @param node          Offset for the module node.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param bi[inout]     Xen's representation of the boot parameters.
+ * @return              -EINVAL on malformed nodes, otherwise
+ *                      index inside `bi->mods`
+ */
+int __init fdt_read_multiboot_module(const void *fdt, int node,
+                                     int address_cells, int size_cells,
+                                     struct boot_info *bi)
+{
+    const struct fdt_property *prop;
+    uint64_t addr, size;
+    int ret;
+    uint32_t idx;
+
+    if ( fdt_node_check_compatible(fdt, node, "multiboot,module") )
+    {
+        printk(XENLOG_ERR "  bad module. multiboot,module not found");
+        return -ENODATA;
+    }
+
+    /* Location given as a `module-index` property. */
+    if ( (prop = fdt_get_property(fdt, node, "module-index", NULL)) )
+    {
+        if ( fdt_get_property(fdt, node, "reg", NULL) )
+        {
+            printk(XENLOG_ERR "  found both reg and module-index for module\n");
+            return -EINVAL;
+        }
+        if ( (ret = fdt_prop_as_u32(prop, &idx)) )
+        {
+            printk(XENLOG_ERR "  bad module-index prop\n");
+            return ret;
+        }
+        if ( idx >= MAX_NR_BOOTMODS )
+        {
+            printk(XENLOG_ERR "  module-index overflow. %s=%u\n",
+                   STR(MAX_NR_BOOTMODS), MAX_NR_BOOTMODS);
+            return -EINVAL;
+        }
+
+        return idx;
+    }
+
+    /* Otherwise location given as a `reg` property. */
+    if ( !(prop = fdt_get_property(fdt, node, "reg", NULL)) )
+    {
+        printk(XENLOG_ERR "  no location for multiboot,module\n");
+        return -EINVAL;
+    }
+    if ( fdt_get_property(fdt, node, "module-index", NULL) )
+    {
+        printk(XENLOG_ERR "  found both reg and module-index for module\n");
+        return -EINVAL;
+    }
+
+    ret = read_fdt_prop_as_reg(prop, address_cells, size_cells, &addr, &size);
+    if ( ret < 0 )
+    {
+        printk(XENLOG_ERR "  failed reading reg for multiboot,module\n");
+        return -EINVAL;
+    }
+
+    idx = bi->nr_modules;
+    if ( idx > MAX_NR_BOOTMODS )
+    {
+        /*
+         * MAX_NR_BOOTMODS must fit in 31 bits so it's representable in the
+         * positive side of an int; for the return value.
+         */
+        BUILD_BUG_ON(MAX_NR_BOOTMODS > (uint64_t)INT_MAX);
+        printk(XENLOG_ERR "  idx=%u exceeds len=%u\n", idx, MAX_NR_BOOTMODS);
+        return -EINVAL;
+    }
+
+    /*
+     * Append new module to the existing list
+     *
+     * Note that bi->nr_modules points to Xen itself, so we must shift it first
+     */
+    bi->nr_modules++;
+    bi->mods[bi->nr_modules] = bi->mods[idx];
+    bi->mods[idx] = (struct boot_module){
+        .start = addr,
+        .size = size,
+    };
+
+    printk(XENLOG_INFO "  module[%u]: addr %lx size %lx\n", idx, addr, size);
+
+    return idx;
+}
+
 static int __init find_hyperlaunch_node(const void *fdt)
 {
     int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
xen/common/domain-builder/fdt.h +2 -0
index 955aead497..8c98a256eb 100644
@@ -2,6 +2,8 @@
 #ifndef __XEN_DOMAIN_BUILDER_FDT_H__
 #define __XEN_DOMAIN_BUILDER_FDT_H__
 
+#include <xen/libfdt/libfdt-xen.h>
+
 struct boot_info;
 
 /* hyperlaunch fdt is required to be module 0 */
xen/include/xen/domain-builder.h +3 -0
index ac2b84775d..ace6b6875b 100644
@@ -5,5 +5,8 @@
 struct boot_info;
 
 void builder_init(struct boot_info *bi);
+int fdt_read_multiboot_module(const void *fdt, int node,
+                              int address_cells, int size_cells,
+                              struct boot_info *bi)
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
xen/include/xen/libfdt/libfdt-xen.h +11 -0
index a5340bc9f4..deafb25d98 100644
@@ -12,6 +12,17 @@
 #define LIBFDT_XEN_H
 
 #include <xen/libfdt/libfdt.h>
+#include <xen/errno.h>
+
+static inline int __init fdt_prop_as_u32(
+    const struct fdt_property *prop, uint32_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(u32) )
+        return -EINVAL;
+
+    *val = fdt32_to_cpu(*(const fdt32_t *)prop->data);
+    return 0;
+}
 
 static inline int fdt_get_mem_rsv_paddr(const void *fdt, int n,
                                         paddr_t *address,
Signature · 1 line
2.43.0
#19 lore raw

Re: [PATCH v4 05/13] x86/hyperlaunch: Add helpers to locate multiboot modules

Quoted 39 lines · Alejandro Vallejo

Hyperlaunch mandates either a reg or module-index DT prop on nodes that contain `multiboot,module" under their "compatible" prop. This patch introduces a helper to generically find such index, appending the module to the list of modules if it wasn't already (i.e: because it's given via the "reg" prop).

---
v4:
* Remove stray reg prop parser in libfdt-xen.h.
* Remove fdt32_as_uX accessors.
* Brough fdt_prop_as_u32() accesor from later patches.
* So it can be used in place of a hardcoded fdt32_as_u32().
* Limited MAX_NR_BOOTMODS to INT_MAX.
* Preserved BOOTMOD_XEN on module append logic.
* Add missing bounds check to module-index parsed in multiboot module helper.
* Converted idx variable to uint32_t for better bounds checking.
* Braces from switch statement to conform to coding style.
* Added missing XENLOG_X.
* Print address_cells and size_cells on error parsing reg properties.
* Added (transient) missing declaration for extern helper.
* becomes static on the next patch.

---
 xen/common/domain-builder/fdt.c     | 162 ++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |   2 +
 xen/include/xen/domain-builder.h    |   3 +
 xen/include/xen/libfdt/libfdt-xen.h |  11 ++
 4 files changed, 178 insertions(+)
xen/common/domain-builder/fdt.c +1 -0
index b5ff8220da..d73536fed6 100644
@@ -13,6 +13,168 @@
 
 #include "fdt.h"
 
+/*

xen/common/domain-builder/fdt.c line 26

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+ * Unpacks a "reg" property into its address and size constituents.
+ *
+ * @param prop          Pointer to an FDT "reg" property.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param p_addr[out]   Address encoded in the property.
+ * @param p_size[out]   Size encoded in the property.
+ * @returns             -EINVAL on malformed property, 0 otherwise.
+ */
+static int __init read_fdt_prop_as_reg(const struct fdt_property *prop,

I would do s/read_fdt_prop_as_reg/fdt_prop_as_reg/ similar to fdt_prop_as_u32() below.

Quoted 189 lines
xen/common/domain-builder/fdt.c +151 -0
+                                       int address_cells, int size_cells,
+                                       uint64_t *p_addr, uint64_t *p_size)
+{
+    const fdt32_t *cell = (const fdt32_t *)prop->data;
+    uint64_t addr, size;
+
+    if ( fdt32_to_cpu(prop->len) !=
+         (address_cells + size_cells) * sizeof(*cell) )
+    {
+        printk(XENLOG_ERR "  cannot read reg %lu+%lu from prop len %u\n",
+            address_cells * sizeof(*cell), size_cells * sizeof(*cell),
+            fdt32_to_cpu(prop->len));
+        return -EINVAL;
+    }
+
+    switch ( address_cells )
+    {
+    case 1:
+        addr = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        addr = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported address_cells=%d\n", address_cells);
+        return -EINVAL;
+    }
+
+    cell += address_cells;
+    switch ( size_cells )
+    {
+    case 1:
+        size = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        size = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported size_cells=%d\n", size_cells);
+        return -EINVAL;
+    }
+
+    *p_addr = addr;
+    *p_size = size;
+
+    return 0;
+}
+
+/*
+ * Locate a multiboot module given its node offset in the FDT.
+ *
+ * The module location may be given via either FDT property:
+ *     * reg = <address, size>
+ *         * Mutates `bi` to append the module.
+ *     * module-index = <idx>
+ *         * Leaves `bi` unchanged.
+ *
+ * @param fdt           Pointer to the full FDT.
+ * @param node          Offset for the module node.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param bi[inout]     Xen's representation of the boot parameters.
+ * @return              -EINVAL on malformed nodes, otherwise
+ *                      index inside `bi->mods`
+ */
+int __init fdt_read_multiboot_module(const void *fdt, int node,
+                                     int address_cells, int size_cells,
+                                     struct boot_info *bi)
+{
+    const struct fdt_property *prop;
+    uint64_t addr, size;
+    int ret;
+    uint32_t idx;
+
+    if ( fdt_node_check_compatible(fdt, node, "multiboot,module") )
+    {
+        printk(XENLOG_ERR "  bad module. multiboot,module not found");
+        return -ENODATA;
+    }
+
+    /* Location given as a `module-index` property. */
+    if ( (prop = fdt_get_property(fdt, node, "module-index", NULL)) )
+    {
+        if ( fdt_get_property(fdt, node, "reg", NULL) )
+        {
+            printk(XENLOG_ERR "  found both reg and module-index for module\n");
+            return -EINVAL;
+        }
+        if ( (ret = fdt_prop_as_u32(prop, &idx)) )
+        {
+            printk(XENLOG_ERR "  bad module-index prop\n");
+            return ret;
+        }
+        if ( idx >= MAX_NR_BOOTMODS )
+        {
+            printk(XENLOG_ERR "  module-index overflow. %s=%u\n",
+                   STR(MAX_NR_BOOTMODS), MAX_NR_BOOTMODS);
+            return -EINVAL;
+        }
+
+        return idx;
+    }
+
+    /* Otherwise location given as a `reg` property. */
+    if ( !(prop = fdt_get_property(fdt, node, "reg", NULL)) )
+    {
+        printk(XENLOG_ERR "  no location for multiboot,module\n");
+        return -EINVAL;
+    }
+    if ( fdt_get_property(fdt, node, "module-index", NULL) )
+    {
+        printk(XENLOG_ERR "  found both reg and module-index for module\n");
+        return -EINVAL;
+    }
+
+    ret = read_fdt_prop_as_reg(prop, address_cells, size_cells, &addr, &size);
+    if ( ret < 0 )
+    {
+        printk(XENLOG_ERR "  failed reading reg for multiboot,module\n");
+        return -EINVAL;
+    }
+
+    idx = bi->nr_modules;
+    if ( idx > MAX_NR_BOOTMODS )
+    {
+        /*
+         * MAX_NR_BOOTMODS must fit in 31 bits so it's representable in the
+         * positive side of an int; for the return value.
+         */
+        BUILD_BUG_ON(MAX_NR_BOOTMODS > (uint64_t)INT_MAX);
+        printk(XENLOG_ERR "  idx=%u exceeds len=%u\n", idx, MAX_NR_BOOTMODS);
+        return -EINVAL;
+    }
+
+    /*
+     * Append new module to the existing list
+     *
+     * Note that bi->nr_modules points to Xen itself, so we must shift it first
+     */
+    bi->nr_modules++;
+    bi->mods[bi->nr_modules] = bi->mods[idx];
+    bi->mods[idx] = (struct boot_module){
+        .start = addr,
+        .size = size,
+    };
+
+    printk(XENLOG_INFO "  module[%u]: addr %lx size %lx\n", idx, addr, size);
+
+    return idx;
+}
+
 static int __init find_hyperlaunch_node(const void *fdt)
 {
     int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
xen/common/domain-builder/fdt.h +2 -0
index 955aead497..8c98a256eb 100644
@@ -2,6 +2,8 @@
 #ifndef __XEN_DOMAIN_BUILDER_FDT_H__
 #define __XEN_DOMAIN_BUILDER_FDT_H__
 
+#include <xen/libfdt/libfdt-xen.h>
+
 struct boot_info;
 
 /* hyperlaunch fdt is required to be module 0 */
xen/include/xen/domain-builder.h +3 -0
index ac2b84775d..ace6b6875b 100644
@@ -5,5 +5,8 @@
 struct boot_info;
 
 void builder_init(struct boot_info *bi);
+int fdt_read_multiboot_module(const void *fdt, int node,
+                              int address_cells, int size_cells,
+                              struct boot_info *bi)
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
xen/include/xen/libfdt/libfdt-xen.h +1 -0
index a5340bc9f4..deafb25d98 100644
@@ -12,6 +12,17 @@
 #define LIBFDT_XEN_H
 
 #include <xen/libfdt/libfdt.h>
+#include <xen/errno.h>

xen/include/xen/libfdt/libfdt-xen.h line 25

Quoted 10 lines
xen/include/xen/libfdt/libfdt-xen.h +10 -0
+
+static inline int __init fdt_prop_as_u32(
+    const struct fdt_property *prop, uint32_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(u32) )
+        return -EINVAL;
+
+    *val = fdt32_to_cpu(*(const fdt32_t *)prop->data);
+    return 0;
+}

My understanding is domain builder establishes its own shims around libfdt so libfdt is kept unmodified and it is easier to pick up libfdt updates.

So, IMO, this function should reside in xen/common/domain-builder/fdt.c

Thoughts?

Quoted 7 lines
xen/include/xen/libfdt/libfdt-xen.h +0 -1
 static inline int fdt_get_mem_rsv_paddr(const void *fdt, int n,
                                         paddr_t *address,
--

2.43.0

#20 lore raw

Re: [PATCH v4 05/13] x86/hyperlaunch: Add helpers to locate multiboot modules

Quoted 39 lines · dmkhn
Quoted 38 lines · Alejandro Vallejo

Hyperlaunch mandates either a reg or module-index DT prop on nodes that contain `multiboot,module" under their "compatible" prop. This patch introduces a helper to generically find such index, appending the module to the list of modules if it wasn't already (i.e: because it's given via the "reg" prop).

---
v4:
* Remove stray reg prop parser in libfdt-xen.h.
* Remove fdt32_as_uX accessors.
* Brough fdt_prop_as_u32() accesor from later patches.
* So it can be used in place of a hardcoded fdt32_as_u32().
* Limited MAX_NR_BOOTMODS to INT_MAX.
* Preserved BOOTMOD_XEN on module append logic.
* Add missing bounds check to module-index parsed in multiboot module helper.
* Converted idx variable to uint32_t for better bounds checking.
* Braces from switch statement to conform to coding style.
* Added missing XENLOG_X.
* Print address_cells and size_cells on error parsing reg properties.
* Added (transient) missing declaration for extern helper.
* becomes static on the next patch.

---
 xen/common/domain-builder/fdt.c     | 162 ++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h     |   2 +
 xen/include/xen/domain-builder.h    |   3 +
 xen/include/xen/libfdt/libfdt-xen.h |  11 ++
 4 files changed, 178 insertions(+)
xen/common/domain-builder/fdt.c +0 -0
index b5ff8220da..d73536fed6 100644
@@ -13,6 +13,168 @@
 
 #include "fdt.h"
 
Quoted 14 lines

xen/common/domain-builder/fdt.c line 26

Quoted 11 lines
xen/common/domain-builder/fdt.c +11 -0
+/*
+ * Unpacks a "reg" property into its address and size constituents.
+ *
+ * @param prop          Pointer to an FDT "reg" property.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param p_addr[out]   Address encoded in the property.
+ * @param p_size[out]   Size encoded in the property.
+ * @returns             -EINVAL on malformed property, 0 otherwise.
+ */
+static int __init read_fdt_prop_as_reg(const struct fdt_property *prop,

I would do s/read_fdt_prop_as_reg/fdt_prop_as_reg/ similar to fdt_prop_as_u32() below.

Yes, that sounds better.

Quoted 204 lines
Quoted 190 lines
xen/common/domain-builder/fdt.c +151 -0
+                                       int address_cells, int size_cells,
+                                       uint64_t *p_addr, uint64_t *p_size)
+{
+    const fdt32_t *cell = (const fdt32_t *)prop->data;
+    uint64_t addr, size;
+
+    if ( fdt32_to_cpu(prop->len) !=
+         (address_cells + size_cells) * sizeof(*cell) )
+    {
+        printk(XENLOG_ERR "  cannot read reg %lu+%lu from prop len %u\n",
+            address_cells * sizeof(*cell), size_cells * sizeof(*cell),
+            fdt32_to_cpu(prop->len));
+        return -EINVAL;
+    }
+
+    switch ( address_cells )
+    {
+    case 1:
+        addr = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        addr = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported address_cells=%d\n", address_cells);
+        return -EINVAL;
+    }
+
+    cell += address_cells;
+    switch ( size_cells )
+    {
+    case 1:
+        size = fdt32_to_cpu(*cell);
+        break;
+    case 2:
+        size = fdt64_to_cpu(*(const fdt64_t *)cell);
+        break;
+    default:
+        printk(XENLOG_ERR "  unsupported size_cells=%d\n", size_cells);
+        return -EINVAL;
+    }
+
+    *p_addr = addr;
+    *p_size = size;
+
+    return 0;
+}
+
+/*
+ * Locate a multiboot module given its node offset in the FDT.
+ *
+ * The module location may be given via either FDT property:
+ *     * reg = <address, size>
+ *         * Mutates `bi` to append the module.
+ *     * module-index = <idx>
+ *         * Leaves `bi` unchanged.
+ *
+ * @param fdt           Pointer to the full FDT.
+ * @param node          Offset for the module node.
+ * @param address_cells Number of 4-octet cells that make up an "address".
+ * @param size_cells    Number of 4-octet cells that make up a "size".
+ * @param bi[inout]     Xen's representation of the boot parameters.
+ * @return              -EINVAL on malformed nodes, otherwise
+ *                      index inside `bi->mods`
+ */
+int __init fdt_read_multiboot_module(const void *fdt, int node,
+                                     int address_cells, int size_cells,
+                                     struct boot_info *bi)
+{
+    const struct fdt_property *prop;
+    uint64_t addr, size;
+    int ret;
+    uint32_t idx;
+
+    if ( fdt_node_check_compatible(fdt, node, "multiboot,module") )
+    {
+        printk(XENLOG_ERR "  bad module. multiboot,module not found");
+        return -ENODATA;
+    }
+
+    /* Location given as a `module-index` property. */
+    if ( (prop = fdt_get_property(fdt, node, "module-index", NULL)) )
+    {
+        if ( fdt_get_property(fdt, node, "reg", NULL) )
+        {
+            printk(XENLOG_ERR "  found both reg and module-index for module\n");
+            return -EINVAL;
+        }
+        if ( (ret = fdt_prop_as_u32(prop, &idx)) )
+        {
+            printk(XENLOG_ERR "  bad module-index prop\n");
+            return ret;
+        }
+        if ( idx >= MAX_NR_BOOTMODS )
+        {
+            printk(XENLOG_ERR "  module-index overflow. %s=%u\n",
+                   STR(MAX_NR_BOOTMODS), MAX_NR_BOOTMODS);
+            return -EINVAL;
+        }
+
+        return idx;
+    }
+
+    /* Otherwise location given as a `reg` property. */
+    if ( !(prop = fdt_get_property(fdt, node, "reg", NULL)) )
+    {
+        printk(XENLOG_ERR "  no location for multiboot,module\n");
+        return -EINVAL;
+    }
+    if ( fdt_get_property(fdt, node, "module-index", NULL) )
+    {
+        printk(XENLOG_ERR "  found both reg and module-index for module\n");
+        return -EINVAL;
+    }
+
+    ret = read_fdt_prop_as_reg(prop, address_cells, size_cells, &addr, &size);
+    if ( ret < 0 )
+    {
+        printk(XENLOG_ERR "  failed reading reg for multiboot,module\n");
+        return -EINVAL;
+    }
+
+    idx = bi->nr_modules;
+    if ( idx > MAX_NR_BOOTMODS )
+    {
+        /*
+         * MAX_NR_BOOTMODS must fit in 31 bits so it's representable in the
+         * positive side of an int; for the return value.
+         */
+        BUILD_BUG_ON(MAX_NR_BOOTMODS > (uint64_t)INT_MAX);
+        printk(XENLOG_ERR "  idx=%u exceeds len=%u\n", idx, MAX_NR_BOOTMODS);
+        return -EINVAL;
+    }
+
+    /*
+     * Append new module to the existing list
+     *
+     * Note that bi->nr_modules points to Xen itself, so we must shift it first
+     */
+    bi->nr_modules++;
+    bi->mods[bi->nr_modules] = bi->mods[idx];
+    bi->mods[idx] = (struct boot_module){
+        .start = addr,
+        .size = size,
+    };
+
+    printk(XENLOG_INFO "  module[%u]: addr %lx size %lx\n", idx, addr, size);
+
+    return idx;
+}
+
 static int __init find_hyperlaunch_node(const void *fdt)
 {
     int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
xen/common/domain-builder/fdt.h +2 -0
index 955aead497..8c98a256eb 100644
@@ -2,6 +2,8 @@
 #ifndef __XEN_DOMAIN_BUILDER_FDT_H__
 #define __XEN_DOMAIN_BUILDER_FDT_H__
 
+#include <xen/libfdt/libfdt-xen.h>
+
 struct boot_info;
 
 /* hyperlaunch fdt is required to be module 0 */
xen/include/xen/domain-builder.h +3 -0
index ac2b84775d..ace6b6875b 100644
@@ -5,5 +5,8 @@
 struct boot_info;
 
 void builder_init(struct boot_info *bi);
+int fdt_read_multiboot_module(const void *fdt, int node,
+                              int address_cells, int size_cells,
+                              struct boot_info *bi)
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
xen/include/xen/libfdt/libfdt-xen.h +1 -0
index a5340bc9f4..deafb25d98 100644
@@ -12,6 +12,17 @@
 #define LIBFDT_XEN_H
 
 #include <xen/libfdt/libfdt.h>
+#include <xen/errno.h>

xen/include/xen/libfdt/libfdt-xen.h line 25

Quoted 10 lines
xen/include/xen/libfdt/libfdt-xen.h +10 -0
+
+static inline int __init fdt_prop_as_u32(
+    const struct fdt_property *prop, uint32_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(u32) )
+        return -EINVAL;
+
+    *val = fdt32_to_cpu(*(const fdt32_t *)prop->data);
+    return 0;
+}

My understanding is domain builder establishes its own shims around libfdt so libfdt is kept unmodified and it is easier to pick up libfdt updates.

Quoted 3 lines

So, IMO, this function should reside in xen/common/domain-builder/fdt.c

Thoughts?

Ugh. Too much code motion is not good for your head. I did mean to move them all (I mentioned it in an earlier response to Jan, I think). Will do for good this time.

Cheers,
Alejandro

#21 lore raw

PATCH v4 6/13 x86/hyperlaunch: locate dom0 kernel with hyperlaunch

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,kernel within a domain node. If found, locate it using the multiboot module helper to generically ensure it lives in the module list. If the bootargs property is present and there was not an MB1 string, then use the command line from the device tree definition.

---
v4:
* Stop printing on the fallback path of builder_init(). It's in fact the most common path and just adds noise.
* Add missing XENLOG_X.
* Simplified check to log error on nr_domains != 1.
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate kernel.
* Turned foo == 0 into !foo in the "multiboot,kernel" check

---
 xen/arch/x86/setup.c             |  5 ---
 xen/common/domain-builder/core.c |  9 +++++
 xen/common/domain-builder/fdt.c  | 64 ++++++++++++++++++++++++++++++--
 xen/include/xen/domain-builder.h |  3 --
 4 files changed, 70 insertions(+), 11 deletions(-)
xen/arch/x86/setup.c +0 -5
index ccc57cc70a..4f669f3c60 100644
@@ -1285,11 +1285,6 @@ void asmlinkage __init noreturn __start_xen(void)
 
     builder_init(bi);
 
-    /* Find first unknown boot module to use as dom0 kernel */
-    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    bi->mods[i].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[i];
-
     if ( pvh_boot )
     {
         /* pvh_init() already filled in e820_raw */
xen/common/domain-builder/core.c +9 -0
index 3b062e85ec..924cb495a3 100644
@@ -54,6 +54,15 @@ void __init builder_init(struct boot_info *bi)
 
         printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
     }
+    else
+    {
+        /* Find first unknown boot module to use as dom0 kernel */
+        unsigned int i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+
+        bi->mods[i].type = BOOTMOD_KERNEL;
+        bi->domains[0].kernel = &bi->mods[i];
+        bi->nr_domains = 1;
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +61 -3

84 lines not on this page · raw message

xen/include/xen/domain-builder.h +0 -3
index ace6b6875b..ac2b84775d 100644
@@ -5,8 +5,5 @@
 struct boot_info;
 
 void builder_init(struct boot_info *bi);
-int fdt_read_multiboot_module(const void *fdt, int node,
-                              int address_cells, int size_cells,
-                              struct boot_info *bi)
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
Signature · 1 line
2.43.0
#22 lore raw

Re: [PATCH v4 06/13] x86/hyperlaunch: locate dom0 kernel with hyperlaunch

Quoted 85 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,kernel within a domain node. If found, locate it using the multiboot module helper to generically ensure it lives in the module list. If the bootargs property is present and there was not an MB1 string, then use the command line from the device tree definition.

---
v4:
* Stop printing on the fallback path of builder_init(). It's in fact the most common path and just adds noise.
* Add missing XENLOG_X.
* Simplified check to log error on nr_domains != 1.
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate kernel.
* Turned foo == 0 into !foo in the "multiboot,kernel" check

---
 xen/arch/x86/setup.c             |  5 ---
 xen/common/domain-builder/core.c |  9 +++++
 xen/common/domain-builder/fdt.c  | 64 ++++++++++++++++++++++++++++++--
 xen/include/xen/domain-builder.h |  3 --
 4 files changed, 70 insertions(+), 11 deletions(-)
xen/arch/x86/setup.c +0 -5
index ccc57cc70a..4f669f3c60 100644
@@ -1285,11 +1285,6 @@ void asmlinkage __init noreturn __start_xen(void)
 
     builder_init(bi);
 
-    /* Find first unknown boot module to use as dom0 kernel */
-    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    bi->mods[i].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[i];
-
     if ( pvh_boot )
     {
         /* pvh_init() already filled in e820_raw */
xen/common/domain-builder/core.c +9 -0
index 3b062e85ec..924cb495a3 100644
@@ -54,6 +54,15 @@ void __init builder_init(struct boot_info *bi)
 
         printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
     }
+    else
+    {
+        /* Find first unknown boot module to use as dom0 kernel */
+        unsigned int i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+
+        bi->mods[i].type = BOOTMOD_KERNEL;
+        bi->domains[0].kernel = &bi->mods[i];
+        bi->nr_domains = 1;
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +5 -3
index d73536fed6..1fae6add3b 100644
@@ -89,9 +89,9 @@ static int __init read_fdt_prop_as_reg(const struct fdt_property *prop,
  * @return              -EINVAL on malformed nodes, otherwise
  *                      index inside `bi->mods`
  */
-int __init fdt_read_multiboot_module(const void *fdt, int node,
-                                     int address_cells, int size_cells,
-                                     struct boot_info *bi)
+static int __init fdt_read_multiboot_module(const void *fdt, int node,
+                                            int address_cells, int size_cells,
+                                            struct boot_info *bi)
 {
     const struct fdt_property *prop;
     uint64_t addr, size;
@@ -175,6 +175,52 @@ int __init fdt_read_multiboot_module(const void *fdt, int node,
     return idx;
 }
 
+static int __init process_domain_node(
+    struct boot_info *bi, const void *fdt, int dom_node)

xen/common/domain-builder/fdt.c int __init fdt_read_multiboot_module(const void *fdt, int node, · line 189

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+{
+    int node;
+    struct boot_domain *bd = &bi->domains[bi->nr_domains];
+    const char *name = fdt_get_name(fdt, dom_node, NULL) ?: "unknown";
+    int address_cells = fdt_address_cells(fdt, dom_node);
+    int size_cells = fdt_size_cells(fdt, dom_node);
+
+    fdt_for_each_subnode(node, fdt, dom_node)
+    {
+        if ( !fdt_node_check_compatible(fdt, node, "multiboot,kernel") )

Suggest to restructure the code to reduce levels of indentation, e.g.:

           int idx;

           if ( fdt_node_check_compatible(fdt, node, "multiboot,kernel") )
               continue;

           if ( bd->kernel )
              ...
Quoted 18 lines
xen/common/domain-builder/fdt.c +18 -0
+        {
+            int idx;
+
+            if ( bd->kernel )
+            {
+                printk(XENLOG_WARNING
+                       "  duplicate kernel for domain %s\n", name);
+                continue;
+            }
+
+            idx = fdt_read_multiboot_module(fdt, node, address_cells,
+                                            size_cells, bi);
+            if ( idx < 0 )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing kernel for domain %s\n", name);
+                return idx;
+            }

xen/common/domain-builder/fdt.c int __init fdt_read_multiboot_module(const void *fdt, int node, · line 217

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+
+            printk(XENLOG_INFO "  kernel: multiboot-index=%d\n", idx);
+            bi->mods[idx].type = BOOTMOD_KERNEL;
+            bd->kernel = &bi->mods[idx];
+        }
+    }
+
+    if ( !bd->kernel )
+    {
+        printk(XENLOG_ERR "error: no kernel assigned to domain\n");

Add domain name printout similar to above logging?

Quoted 47 lines
xen/common/domain-builder/fdt.c +18 -0
+        return -ENODATA;
+    }
+
+    return 0;
+}
+
 static int __init find_hyperlaunch_node(const void *fdt)
 {
     int hv_node = fdt_path_offset(fdt, "/chosen/hypervisor");
@@ -237,8 +283,20 @@ int __init walk_hyperlaunch_fdt(struct boot_info *bi)
 
     fdt_for_each_subnode(node, fdt, hv_node)
     {
+        if ( bi->nr_domains >= MAX_NR_BOOTDOMS )
+        {
+            printk(XENLOG_WARNING "warning: only creating first %u domains\n",
+                   MAX_NR_BOOTDOMS);
+            break;
+        }
+
         if ( !fdt_node_check_compatible(fdt, node, "xen,domain") )
+        {
+            if ( (ret = process_domain_node(bi, fdt, node)) < 0 )
+                break;
+
             bi->nr_domains++;
+        }
     }
 
     /* Until multi-domain construction is added, throw an error */
xen/include/xen/domain-builder.h +0 -4
index ace6b6875b..ac2b84775d 100644
@@ -5,8 +5,5 @@
 struct boot_info;
 
 void builder_init(struct boot_info *bi);
-int fdt_read_multiboot_module(const void *fdt, int node,
-                              int address_cells, int size_cells,
-                              struct boot_info *bi)
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
--

2.43.0

#23 lore raw

Re: [PATCH v4 06/13] x86/hyperlaunch: locate dom0 kernel with hyperlaunch

Quoted 99 lines · dmkhn
Quoted 85 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,kernel within a domain node. If found, locate it using the multiboot module helper to generically ensure it lives in the module list. If the bootargs property is present and there was not an MB1 string, then use the command line from the device tree definition.

---
v4:
* Stop printing on the fallback path of builder_init(). It's in fact the most common path and just adds noise.
* Add missing XENLOG_X.
* Simplified check to log error on nr_domains != 1.
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate kernel.
* Turned foo == 0 into !foo in the "multiboot,kernel" check

---
 xen/arch/x86/setup.c             |  5 ---
 xen/common/domain-builder/core.c |  9 +++++
 xen/common/domain-builder/fdt.c  | 64 ++++++++++++++++++++++++++++++--
 xen/include/xen/domain-builder.h |  3 --
 4 files changed, 70 insertions(+), 11 deletions(-)
xen/arch/x86/setup.c +0 -5
index ccc57cc70a..4f669f3c60 100644
@@ -1285,11 +1285,6 @@ void asmlinkage __init noreturn __start_xen(void)
 
     builder_init(bi);
 
-    /* Find first unknown boot module to use as dom0 kernel */
-    i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    bi->mods[i].type = BOOTMOD_KERNEL;
-    bi->domains[0].kernel = &bi->mods[i];
-
     if ( pvh_boot )
     {
         /* pvh_init() already filled in e820_raw */
xen/common/domain-builder/core.c +9 -0
index 3b062e85ec..924cb495a3 100644
@@ -54,6 +54,15 @@ void __init builder_init(struct boot_info *bi)
 
         printk(XENLOG_INFO "  number of domains: %u\n", bi->nr_domains);
     }
+    else
+    {
+        /* Find first unknown boot module to use as dom0 kernel */
+        unsigned int i = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
+
+        bi->mods[i].type = BOOTMOD_KERNEL;
+        bi->domains[0].kernel = &bi->mods[i];
+        bi->nr_domains = 1;
+    }
 }
 
 /*
xen/common/domain-builder/fdt.c +5 -3
index d73536fed6..1fae6add3b 100644
@@ -89,9 +89,9 @@ static int __init read_fdt_prop_as_reg(const struct fdt_property *prop,
  * @return              -EINVAL on malformed nodes, otherwise
  *                      index inside `bi->mods`
  */
-int __init fdt_read_multiboot_module(const void *fdt, int node,
-                                     int address_cells, int size_cells,
-                                     struct boot_info *bi)
+static int __init fdt_read_multiboot_module(const void *fdt, int node,
+                                            int address_cells, int size_cells,
+                                            struct boot_info *bi)
 {
     const struct fdt_property *prop;
     uint64_t addr, size;
@@ -175,6 +175,52 @@ int __init fdt_read_multiboot_module(const void *fdt, int node,
     return idx;
 }
 
+static int __init process_domain_node(
+    struct boot_info *bi, const void *fdt, int dom_node)

xen/common/domain-builder/fdt.c int __init fdt_read_multiboot_module(const void *fdt, int node, · line 189

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+{
+    int node;
+    struct boot_domain *bd = &bi->domains[bi->nr_domains];
+    const char *name = fdt_get_name(fdt, dom_node, NULL) ?: "unknown";
+    int address_cells = fdt_address_cells(fdt, dom_node);
+    int size_cells = fdt_size_cells(fdt, dom_node);
+
+    fdt_for_each_subnode(node, fdt, dom_node)
+    {
+        if ( !fdt_node_check_compatible(fdt, node, "multiboot,kernel") )

Suggest to restructure the code to reduce levels of indentation, e.g.:

Quoted 8 lines
           int idx;

           if ( fdt_node_check_compatible(fdt, node, "multiboot,kernel") )
               continue;

           if ( bd->kernel )
              ...

This hunk checking for "multiboot,kernel" is part of an if-elseif in a later patch that also checks for "multiboot,ramdisk", so we can't just do an early continue here without forcing a bigger diff later on.

Quoted 23 lines
Quoted 23 lines
xen/common/domain-builder/fdt.c +22 -0
+        {
+            int idx;
+
+            if ( bd->kernel )
+            {
+                printk(XENLOG_WARNING
+                       "  duplicate kernel for domain %s\n", name);
+                continue;
+            }
+
+            idx = fdt_read_multiboot_module(fdt, node, address_cells,
+                                            size_cells, bi);
+            if ( idx < 0 )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing kernel for domain %s\n", name);
+                return idx;
+            }
+
+            printk(XENLOG_INFO "  kernel: multiboot-index=%d\n", idx);
+            bi->mods[idx].type = BOOTMOD_KERNEL;
+            bd->kernel = &bi->mods[idx];
Quoted 8 lines

xen/common/domain-builder/fdt.c int __init fdt_read_multiboot_module(const void *fdt, int node, · line 217

Quoted 6 lines
xen/common/domain-builder/fdt.c +6 -0
+        }
+    }
+
+    if ( !bd->kernel )
+    {
+        printk(XENLOG_ERR "error: no kernel assigned to domain\n");

Add domain name printout similar to above logging?

Good point.

Cheers,
Alejandro

#24 lore raw

PATCH v4 7/13 x86/hyperlaunch: obtain cmdline from device tree

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add support to read the command line from the hyperlauunch device tree. The device tree command line is located in the "bootargs" property of the "multiboot,kernel" node.

A boot loader command line, e.g. a grub module string field, takes precendence ove the device tree one since it is easier to modify.

---
v4:
* Removed __init from header declarations.
* Removed ifdef guards, as DCE ensures the missing definitions don't matter.
* Removed ifdef guards from new helpers in domain-builder/fdt.c
* Rely on DCE instead.
* Restored checks for cmdline_pa being zero.
* swapped offset and poffset varnames in libfdt-xen.h helper.
* swapped name and pname varnames in libfdt-xen.h helper.
* Turned foo == 0 into !foo in libfdt-xen.h helper.

---
 xen/arch/x86/include/asm/bootinfo.h |  6 ++++--
 xen/arch/x86/setup.c                | 10 +++++++--
 xen/common/domain-builder/core.c    | 32 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     |  6 ++++++
 xen/common/domain-builder/fdt.h     | 24 ++++++++++++++++++++++
 xen/include/xen/domain-builder.h    |  4 ++++
 xen/include/xen/libfdt/libfdt-xen.h | 23 +++++++++++++++++++++
 7 files changed, 101 insertions(+), 4 deletions(-)
xen/arch/x86/include/asm/bootinfo.h +4 -2
index 1e3d582e45..5b2c93b1ef 100644
@@ -35,11 +35,13 @@ struct boot_module {
 
     /*
      * Module State Flags:
-     *   relocated: indicates module has been relocated in memory.
-     *   released:  indicates module's pages have been freed.
+     *   relocated:   indicates module has been relocated in memory.
+     *   released:    indicates module's pages have been freed.
+     *   fdt_cmdline: indicates module's cmdline is in the FDT.
      */
     bool relocated:1;
     bool released:1;
+    bool fdt_cmdline:1;
 
     /*
      * A boot module may need decompressing by Xen.  Headroom is an estimate of
xen/arch/x86/setup.c +8 -2
index 4f669f3c60..4cae13163b 100644
@@ -984,7 +984,10 @@ static size_t __init domain_cmdline_size(const struct boot_info *bi,
 {
     size_t s = bi->kextra ? strlen(bi->kextra) : 0;
 
-    s += bd->kernel->cmdline_pa ? strlen(__va(bd->kernel->cmdline_pa)) : 0;
+    if ( bd->kernel->fdt_cmdline )
+        s += builder_get_cmdline_size(bi, bd->kernel->cmdline_pa);
+    else if ( bd->kernel->cmdline_pa )
+        s += strlen(__va(bd->kernel->cmdline_pa));
 
     if ( s == 0 )
         return s;
@@ -1047,7 +1050,10 @@ static struct domain *__init create_dom0(struct boot_info *bi)
         if ( !(cmdline = xzalloc_array(char, cmdline_size)) )
             panic("Error allocating cmdline buffer for %pd\n", d);
 
-        if ( bd->kernel->cmdline_pa )
+        if ( bd->kernel->fdt_cmdline )
+            builder_get_cmdline(
+                bi, bd->kernel->cmdline_pa, cmdline, cmdline_size);
+        else if ( bd->kernel->cmdline_pa )
             strlcpy(cmdline,
                     cmdline_cook(__va(bd->kernel->cmdline_pa), bi->loader),
                     cmdline_size);
xen/common/domain-builder/core.c +32 -0
index 924cb495a3..4b4230f2ff 100644
@@ -8,9 +8,41 @@
 #include <xen/lib.h>
 
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include "fdt.h"
 
+size_t __init builder_get_cmdline_size(struct boot_info *bi, int offset)
+{
+    const void *fdt;
+    int size;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    size = fdt_cmdline_prop_size(fdt, offset);
+    bootstrap_unmap();
+
+    return max(0, size);
+}
+
+int __init builder_get_cmdline(
+    struct boot_info *bi, int offset, char *cmdline, size_t size)
+{
+    const void *fdt;
+    int ret;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    ret = fdt_cmdline_prop_copy(fdt, offset, cmdline, size);
+    bootstrap_unmap();
+
+    return ret;
+}
+
 void __init builder_init(struct boot_info *bi)
 {
     bi->hyperlaunch_enabled = false;
xen/common/domain-builder/fdt.c +6 -0
index 1fae6add3b..50fde2d007 100644
@@ -209,6 +209,12 @@ static int __init process_domain_node(
             printk(XENLOG_INFO "  kernel: multiboot-index=%d\n", idx);
             bi->mods[idx].type = BOOTMOD_KERNEL;
             bd->kernel = &bi->mods[idx];
+
+            /* If bootloader didn't set cmdline, see if FDT provides one. */
+            if ( bd->kernel->cmdline_pa &&
+                 !((char *)__va(bd->kernel->cmdline_pa))[0] )
+                bd->kernel->fdt_cmdline = fdt_get_prop_offset(
+                    fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
     }
 
xen/common/domain-builder/fdt.h +24 -0
index 8c98a256eb..d2ae7d5c36 100644
@@ -9,6 +9,30 @@ struct boot_info;
 /* hyperlaunch fdt is required to be module 0 */
 #define HYPERLAUNCH_MODULE_IDX 0
 
+static inline int __init fdt_cmdline_prop_size(const void *fdt, int offset)
+{
+    int ret;
+
+    fdt_get_property_by_offset(fdt, offset, &ret);
+
+    return ret;
+}
+
+static inline int __init fdt_cmdline_prop_copy(
+    const void *fdt, int offset, char *cmdline, size_t size)
+{
+    int ret;
+    const struct fdt_property *prop =
+        fdt_get_property_by_offset(fdt, offset, &ret);
+
+    if ( ret < 0 )
+        return ret;
+
+    ASSERT(size > ret);
+
+    return strlcpy(cmdline, prop->data, ret);
+}
+
 int has_hyperlaunch_fdt(const struct boot_info *bi);
 int walk_hyperlaunch_fdt(struct boot_info *bi);
 
xen/include/xen/domain-builder.h +4 -0
index ac2b84775d..ac0fd8f60b 100644
@@ -4,6 +4,10 @@
 
 struct boot_info;
 
+size_t builder_get_cmdline_size(const struct boot_info *bi, int offset);
+int builder_get_cmdline(const struct boot_info *bi, int offset,
+                               char *cmdline, size_t size);
+
 void builder_init(struct boot_info *bi);
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
xen/include/xen/libfdt/libfdt-xen.h +23 -0
index deafb25d98..afc76e7750 100644
@@ -24,6 +24,29 @@ static inline int __init fdt_prop_as_u32(
     return 0;
 }
 
+static inline bool __init fdt_get_prop_offset(
+    const void *fdt, int node, const char *pname, unsigned long *poffset)
+{
+    int ret, offset;
+    const char *name;
+
+    fdt_for_each_property_offset(offset, fdt, node)
+    {
+        fdt_getprop_by_offset(fdt, offset, &name, &ret);
+
+        if ( ret < 0 )
+            continue;
+
+        if ( !strcmp(name, pname) )
+        {
+            *poffset = offset;
+            return true;
+        }
+    }
+
+    return false;
+}
+
 static inline int fdt_get_mem_rsv_paddr(const void *fdt, int n,
                                         paddr_t *address,
                                         paddr_t *size)
Signature · 1 line
2.43.0
#25 lore raw

Re: [PATCH v4 07/13] x86/hyperlaunch: obtain cmdline from device tree

Quoted 8 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add support to read the command line from the hyperlauunch device tree. The device tree command line is located in the "bootargs" property of the "multiboot,kernel" node.

A boot loader command line, e.g. a grub module string field, takes precendence ove the device tree one since it is easier to modify.

              ^^ over

Also, I would explain the command line parsing rules in the code commentary for domain_cmdline_size() below.

Quoted 141 lines

---
v4:
* Removed __init from header declarations.
* Removed ifdef guards, as DCE ensures the missing definitions don't matter.
* Removed ifdef guards from new helpers in domain-builder/fdt.c
* Rely on DCE instead.
* Restored checks for cmdline_pa being zero.
* swapped offset and poffset varnames in libfdt-xen.h helper.
* swapped name and pname varnames in libfdt-xen.h helper.
* Turned foo == 0 into !foo in libfdt-xen.h helper.

---
 xen/arch/x86/include/asm/bootinfo.h |  6 ++++--
 xen/arch/x86/setup.c                | 10 +++++++--
 xen/common/domain-builder/core.c    | 32 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     |  6 ++++++
 xen/common/domain-builder/fdt.h     | 24 ++++++++++++++++++++++
 xen/include/xen/domain-builder.h    |  4 ++++
 xen/include/xen/libfdt/libfdt-xen.h | 23 +++++++++++++++++++++
 7 files changed, 101 insertions(+), 4 deletions(-)
xen/arch/x86/include/asm/bootinfo.h +4 -2
index 1e3d582e45..5b2c93b1ef 100644
@@ -35,11 +35,13 @@ struct boot_module {
 
     /*
      * Module State Flags:
-     *   relocated: indicates module has been relocated in memory.
-     *   released:  indicates module's pages have been freed.
+     *   relocated:   indicates module has been relocated in memory.
+     *   released:    indicates module's pages have been freed.
+     *   fdt_cmdline: indicates module's cmdline is in the FDT.
      */
     bool relocated:1;
     bool released:1;
+    bool fdt_cmdline:1;
 
     /*
      * A boot module may need decompressing by Xen.  Headroom is an estimate of
xen/arch/x86/setup.c +8 -2
index 4f669f3c60..4cae13163b 100644
@@ -984,7 +984,10 @@ static size_t __init domain_cmdline_size(const struct boot_info *bi,
 {
     size_t s = bi->kextra ? strlen(bi->kextra) : 0;
 
-    s += bd->kernel->cmdline_pa ? strlen(__va(bd->kernel->cmdline_pa)) : 0;
+    if ( bd->kernel->fdt_cmdline )
+        s += builder_get_cmdline_size(bi, bd->kernel->cmdline_pa);
+    else if ( bd->kernel->cmdline_pa )
+        s += strlen(__va(bd->kernel->cmdline_pa));
 
     if ( s == 0 )
         return s;
@@ -1047,7 +1050,10 @@ static struct domain *__init create_dom0(struct boot_info *bi)
         if ( !(cmdline = xzalloc_array(char, cmdline_size)) )
             panic("Error allocating cmdline buffer for %pd\n", d);
 
-        if ( bd->kernel->cmdline_pa )
+        if ( bd->kernel->fdt_cmdline )
+            builder_get_cmdline(
+                bi, bd->kernel->cmdline_pa, cmdline, cmdline_size);
+        else if ( bd->kernel->cmdline_pa )
             strlcpy(cmdline,
                     cmdline_cook(__va(bd->kernel->cmdline_pa), bi->loader),
                     cmdline_size);
xen/common/domain-builder/core.c +32 -0
index 924cb495a3..4b4230f2ff 100644
@@ -8,9 +8,41 @@
 #include <xen/lib.h>
 
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include "fdt.h"
 
+size_t __init builder_get_cmdline_size(struct boot_info *bi, int offset)
+{
+    const void *fdt;
+    int size;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    size = fdt_cmdline_prop_size(fdt, offset);
+    bootstrap_unmap();
+
+    return max(0, size);
+}
+
+int __init builder_get_cmdline(
+    struct boot_info *bi, int offset, char *cmdline, size_t size)
+{
+    const void *fdt;
+    int ret;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    ret = fdt_cmdline_prop_copy(fdt, offset, cmdline, size);
+    bootstrap_unmap();
+
+    return ret;
+}
+
 void __init builder_init(struct boot_info *bi)
 {
     bi->hyperlaunch_enabled = false;
xen/common/domain-builder/fdt.c +6 -0
index 1fae6add3b..50fde2d007 100644
@@ -209,6 +209,12 @@ static int __init process_domain_node(
             printk(XENLOG_INFO "  kernel: multiboot-index=%d\n", idx);
             bi->mods[idx].type = BOOTMOD_KERNEL;
             bd->kernel = &bi->mods[idx];
+
+            /* If bootloader didn't set cmdline, see if FDT provides one. */
+            if ( bd->kernel->cmdline_pa &&
+                 !((char *)__va(bd->kernel->cmdline_pa))[0] )
+                bd->kernel->fdt_cmdline = fdt_get_prop_offset(
+                    fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
     }
 
xen/common/domain-builder/fdt.h +0 -0
index 8c98a256eb..d2ae7d5c36 100644

xen/common/domain-builder/fdt.h struct boot_info; · line 16

Quoted 8 lines
xen/common/domain-builder/fdt.h +5 -0
@@ -9,6 +9,30 @@ struct boot_info;
 /* hyperlaunch fdt is required to be module 0 */
 #define HYPERLAUNCH_MODULE_IDX 0
 
+static inline int __init fdt_cmdline_prop_size(const void *fdt, int offset)
+{
+    int ret;
+
+    fdt_get_property_by_offset(fdt, offset, &ret);

Perhaps something like

       (void)fdt_get_property_by_offset...

since there's no need to check the return value?

Quoted 44 lines
xen/common/domain-builder/fdt.h +19 -0
+
+    return ret;
+}
+
+static inline int __init fdt_cmdline_prop_copy(
+    const void *fdt, int offset, char *cmdline, size_t size)
+{
+    int ret;
+    const struct fdt_property *prop =
+        fdt_get_property_by_offset(fdt, offset, &ret);
+
+    if ( ret < 0 )
+        return ret;
+
+    ASSERT(size > ret);
+
+    return strlcpy(cmdline, prop->data, ret);
+}
+
 int has_hyperlaunch_fdt(const struct boot_info *bi);
 int walk_hyperlaunch_fdt(struct boot_info *bi);
 
xen/include/xen/domain-builder.h +4 -0
index ac2b84775d..ac0fd8f60b 100644
@@ -4,6 +4,10 @@
 
 struct boot_info;
 
+size_t builder_get_cmdline_size(const struct boot_info *bi, int offset);
+int builder_get_cmdline(const struct boot_info *bi, int offset,
+                               char *cmdline, size_t size);
+
 void builder_init(struct boot_info *bi);
 
 #endif /* __XEN_DOMAIN_BUILDER_H__ */
xen/include/xen/libfdt/libfdt-xen.h +0 -0
index deafb25d98..afc76e7750 100644
@@ -24,6 +24,29 @@ static inline int __init fdt_prop_as_u32(
     return 0;
 }

xen/include/xen/libfdt/libfdt-xen.h static inline int __init fdt_prop_as_u32( · line 35

Quoted 10 lines
xen/include/xen/libfdt/libfdt-xen.h +9 -0
 
+static inline bool __init fdt_get_prop_offset(
+    const void *fdt, int node, const char *pname, unsigned long *poffset)
+{
+    int ret, offset;
+    const char *name;
+
+    fdt_for_each_property_offset(offset, fdt, node)
+    {
+        fdt_getprop_by_offset(fdt, offset, &name, &ret);

Add

           (void)fdt_get_property_by_offset...

here as well?

Quoted 21 lines
xen/include/xen/libfdt/libfdt-xen.h +14 -1
+
+        if ( ret < 0 )
+            continue;
+
+        if ( !strcmp(name, pname) )
+        {
+            *poffset = offset;
+            return true;
+        }
+    }
+
+    return false;
+}
+
 static inline int fdt_get_mem_rsv_paddr(const void *fdt, int n,
                                         paddr_t *address,
                                         paddr_t *size)
--

2.43.0

#26 lore raw

Re: [PATCH v4 07/13] x86/hyperlaunch: obtain cmdline from device tree

Quoted 11 lines · dmkhn
Quoted 8 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add support to read the command line from the hyperlauunch device tree. The device tree command line is located in the "bootargs" property of the "multiboot,kernel" node.

A boot loader command line, e.g. a grub module string field, takes precendence ove the device tree one since it is easier to modify.

              ^^ over

Oops. yes.

Quoted 3 lines

Also, I would explain the command line parsing rules in the code commentary for domain_cmdline_size() below.

As in, also state the contents of the commit message in the function header?

Quoted 153 lines
Quoted 142 lines

---
v4:
* Removed __init from header declarations.
* Removed ifdef guards, as DCE ensures the missing definitions don't matter.
* Removed ifdef guards from new helpers in domain-builder/fdt.c
* Rely on DCE instead.
* Restored checks for cmdline_pa being zero.
* swapped offset and poffset varnames in libfdt-xen.h helper.
* swapped name and pname varnames in libfdt-xen.h helper.
* Turned foo == 0 into !foo in libfdt-xen.h helper.

---
 xen/arch/x86/include/asm/bootinfo.h |  6 ++++--
 xen/arch/x86/setup.c                | 10 +++++++--
 xen/common/domain-builder/core.c    | 32 +++++++++++++++++++++++++++++
 xen/common/domain-builder/fdt.c     |  6 ++++++
 xen/common/domain-builder/fdt.h     | 24 ++++++++++++++++++++++
 xen/include/xen/domain-builder.h    |  4 ++++
 xen/include/xen/libfdt/libfdt-xen.h | 23 +++++++++++++++++++++
 7 files changed, 101 insertions(+), 4 deletions(-)
xen/arch/x86/include/asm/bootinfo.h +4 -2
index 1e3d582e45..5b2c93b1ef 100644
@@ -35,11 +35,13 @@ struct boot_module {
 
     /*
      * Module State Flags:
-     *   relocated: indicates module has been relocated in memory.
-     *   released:  indicates module's pages have been freed.
+     *   relocated:   indicates module has been relocated in memory.
+     *   released:    indicates module's pages have been freed.
+     *   fdt_cmdline: indicates module's cmdline is in the FDT.
      */
     bool relocated:1;
     bool released:1;
+    bool fdt_cmdline:1;
 
     /*
      * A boot module may need decompressing by Xen.  Headroom is an estimate of
xen/arch/x86/setup.c +8 -2
index 4f669f3c60..4cae13163b 100644
@@ -984,7 +984,10 @@ static size_t __init domain_cmdline_size(const struct boot_info *bi,
 {
     size_t s = bi->kextra ? strlen(bi->kextra) : 0;
 
-    s += bd->kernel->cmdline_pa ? strlen(__va(bd->kernel->cmdline_pa)) : 0;
+    if ( bd->kernel->fdt_cmdline )
+        s += builder_get_cmdline_size(bi, bd->kernel->cmdline_pa);
+    else if ( bd->kernel->cmdline_pa )
+        s += strlen(__va(bd->kernel->cmdline_pa));
 
     if ( s == 0 )
         return s;
@@ -1047,7 +1050,10 @@ static struct domain *__init create_dom0(struct boot_info *bi)
         if ( !(cmdline = xzalloc_array(char, cmdline_size)) )
             panic("Error allocating cmdline buffer for %pd\n", d);
 
-        if ( bd->kernel->cmdline_pa )
+        if ( bd->kernel->fdt_cmdline )
+            builder_get_cmdline(
+                bi, bd->kernel->cmdline_pa, cmdline, cmdline_size);
+        else if ( bd->kernel->cmdline_pa )
             strlcpy(cmdline,
                     cmdline_cook(__va(bd->kernel->cmdline_pa), bi->loader),
                     cmdline_size);
xen/common/domain-builder/core.c +32 -0
index 924cb495a3..4b4230f2ff 100644
@@ -8,9 +8,41 @@
 #include <xen/lib.h>
 
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include "fdt.h"
 
+size_t __init builder_get_cmdline_size(struct boot_info *bi, int offset)
+{
+    const void *fdt;
+    int size;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    size = fdt_cmdline_prop_size(fdt, offset);
+    bootstrap_unmap();
+
+    return max(0, size);
+}
+
+int __init builder_get_cmdline(
+    struct boot_info *bi, int offset, char *cmdline, size_t size)
+{
+    const void *fdt;
+    int ret;
+
+    if ( !IS_ENABLED(CONFIG_DOMAIN_BUILDER) )
+        return 0;
+
+    fdt = bootstrap_map_bm(&bi->mods[HYPERLAUNCH_MODULE_IDX]);
+    ret = fdt_cmdline_prop_copy(fdt, offset, cmdline, size);
+    bootstrap_unmap();
+
+    return ret;
+}
+
 void __init builder_init(struct boot_info *bi)
 {
     bi->hyperlaunch_enabled = false;
xen/common/domain-builder/fdt.c +6 -0
index 1fae6add3b..50fde2d007 100644
@@ -209,6 +209,12 @@ static int __init process_domain_node(
             printk(XENLOG_INFO "  kernel: multiboot-index=%d\n", idx);
             bi->mods[idx].type = BOOTMOD_KERNEL;
             bd->kernel = &bi->mods[idx];
+
+            /* If bootloader didn't set cmdline, see if FDT provides one. */
+            if ( bd->kernel->cmdline_pa &&
+                 !((char *)__va(bd->kernel->cmdline_pa))[0] )
+                bd->kernel->fdt_cmdline = fdt_get_prop_offset(
+                    fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
     }
 
xen/common/domain-builder/fdt.h +0 -0
index 8c98a256eb..d2ae7d5c36 100644

xen/common/domain-builder/fdt.h struct boot_info; · line 16

Quoted 8 lines
xen/common/domain-builder/fdt.h +5 -0
@@ -9,6 +9,30 @@ struct boot_info;
 /* hyperlaunch fdt is required to be module 0 */
 #define HYPERLAUNCH_MODULE_IDX 0
 
+static inline int __init fdt_cmdline_prop_size(const void *fdt, int offset)
+{
+    int ret;
+
+    fdt_get_property_by_offset(fdt, offset, &ret);

Perhaps something like

Quoted 3 lines
       (void)fdt_get_property_by_offset...

since there's no need to check the return value?

I vaguely seem to remember doing something like that a few years ago (because it does show intent and many linters require it) and being told not to. But maybe I misremember. I'm definitely happy to use that convention here and later unless someone pushes back for some reason.

Cheers,
Alejandro

#27 lore raw

Re: [PATCH v4 07/13] x86/hyperlaunch: obtain cmdline from device tree

Quoted 16 lines · Alejandro Vallejo
Quoted 15 lines · dmkhn

xen/common/domain-builder/fdt.h struct boot_info; · line 16

Quoted 11 lines · Alejandro Vallejo
xen/common/domain-builder/fdt.h +5 -0
@@ -9,6 +9,30 @@ struct boot_info;
 /* hyperlaunch fdt is required to be module 0 */
 #define HYPERLAUNCH_MODULE_IDX 0
 
+static inline int __init fdt_cmdline_prop_size(const void *fdt, int offset)
+{
+    int ret;
+
+    fdt_get_property_by_offset(fdt, offset, &ret);

Perhaps something like

Quoted 8 lines
Quoted 3 lines
       (void)fdt_get_property_by_offset...

since there's no need to check the return value?

I vaguely seem to remember doing something like that a few years ago (because it does show intent and many linters require it) and being told not to. But maybe I misremember. I'm definitely happy to use that convention here and later unless someone pushes back for some reason.

Unless we settle on the need for such for Misra's sake, I'd like to ask to avoid them. We generally try to avoid casts as much as possible. We then also shouldn't add ones like suggested here.

Jan

#28 lore raw

Re: [PATCH v4 07/13] x86/hyperlaunch: obtain cmdline from device tree

Quoted 21 lines · Jan Beulich
Quoted 20 lines · Alejandro Vallejo
Quoted 18 lines · dmkhn

xen/common/domain-builder/fdt.h struct boot_info; · line 16

Quoted 11 lines · Alejandro Vallejo
xen/common/domain-builder/fdt.h +5 -0
@@ -9,6 +9,30 @@ struct boot_info;
 /* hyperlaunch fdt is required to be module 0 */
 #define HYPERLAUNCH_MODULE_IDX 0
 
+static inline int __init fdt_cmdline_prop_size(const void *fdt, int offset)
+{
+    int ret;
+
+    fdt_get_property_by_offset(fdt, offset, &ret);

Perhaps something like

       (void)fdt_get_property_by_offset...

since there's no need to check the return value?

Quoted 8 lines
Quoted 4 lines

I vaguely seem to remember doing something like that a few years ago (because it does show intent and many linters require it) and being told not to. But maybe I misremember. I'm definitely happy to use that convention here and later unless someone pushes back for some reason.

Unless we settle on the need for such for Misra's sake, I'd like to ask to avoid them. We generally try to avoid casts as much as possible. We then also shouldn't add ones like suggested here.

Ack.

Quoted 2 lines

Jan

#29 lore raw

PATCH v4 8/13 x86/hyperlaunch: locate dom0 initrd with hyperlaunch

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,ramdisk within a domain node and parse via the fdt_read_multiboot_module() helper. After a successful helper call, the module index is returned and the module is guaranteed to be in the module list.

Fix unused typo in adjacent comment.

---
v4:
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate ramdisk.
* Removed stray ")" in printk
* s/else if/if/ (because of continue)
* Removed trailing continue

---
 xen/arch/x86/setup.c            |  4 ++--
 xen/common/domain-builder/fdt.c | 25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 2 deletions(-)
xen/arch/x86/setup.c +2 -2
index 4cae13163b..76ceb5221f 100644
@@ -2150,11 +2150,11 @@ void asmlinkage __init noreturn __start_xen(void)
      * At this point all capabilities that consume boot modules should have
      * claimed their boot modules. Find the first unclaimed boot module and
      * claim it as the initrd ramdisk. Do a second search to see if there are
-     * any remaining unclaimed boot modules, and report them as unusued initrd
+     * any remaining unclaimed boot modules, and report them as unused initrd
      * candidates.
      */
     initrdidx = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    if ( initrdidx < MAX_NR_BOOTMODS )
+    if ( !bi->hyperlaunch_enabled && initrdidx < MAX_NR_BOOTMODS )
     {
         bi->mods[initrdidx].type = BOOTMOD_RAMDISK;
         bi->domains[0].module = &bi->mods[initrdidx];
xen/common/domain-builder/fdt.c +25 -0
index 50fde2d007..c0f526a4ce 100644
@@ -216,6 +216,31 @@ static int __init process_domain_node(
                 bd->kernel->fdt_cmdline = fdt_get_prop_offset(
                     fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
+        else if ( !fdt_node_check_compatible(fdt, node, "multiboot,ramdisk") )
+        {
+            int idx;
+
+            if ( bd->module )
+            {
+                printk(XENLOG_WARNING
+                       "Duplicate module for domain %s\n", name);
+                continue;
+            }
+
+            idx = fdt_read_multiboot_module(fdt, node, address_cells,
+                                            size_cells, bi);
+            if ( idx < 0 )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing module for domain %s\n",
+                       name);
+                return -EINVAL;
+            }
+
+            printk(XENLOG_INFO "  module: multiboot-index=%d\n", idx);
+            bi->mods[idx].type = BOOTMOD_RAMDISK;
+            bd->module = &bi->mods[idx];
+        }
     }
 
     if ( !bd->kernel )
Signature · 1 line
2.43.0
#30 lore raw

Re: [PATCH v4 08/13] x86/hyperlaunch: locate dom0 initrd with hyperlaunch

Quoted 58 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,ramdisk within a domain node and parse via the fdt_read_multiboot_module() helper. After a successful helper call, the module index is returned and the module is guaranteed to be in the module list.

Fix unused typo in adjacent comment.

---
v4:
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate ramdisk.
* Removed stray ")" in printk
* s/else if/if/ (because of continue)
* Removed trailing continue

---
 xen/arch/x86/setup.c            |  4 ++--
 xen/common/domain-builder/fdt.c | 25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 2 deletions(-)
xen/arch/x86/setup.c +2 -2
index 4cae13163b..76ceb5221f 100644
@@ -2150,11 +2150,11 @@ void asmlinkage __init noreturn __start_xen(void)
      * At this point all capabilities that consume boot modules should have
      * claimed their boot modules. Find the first unclaimed boot module and
      * claim it as the initrd ramdisk. Do a second search to see if there are
-     * any remaining unclaimed boot modules, and report them as unusued initrd
+     * any remaining unclaimed boot modules, and report them as unused initrd
      * candidates.
      */
     initrdidx = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    if ( initrdidx < MAX_NR_BOOTMODS )
+    if ( !bi->hyperlaunch_enabled && initrdidx < MAX_NR_BOOTMODS )
     {
         bi->mods[initrdidx].type = BOOTMOD_RAMDISK;
         bi->domains[0].module = &bi->mods[initrdidx];
xen/common/domain-builder/fdt.c +9 -0
index 50fde2d007..c0f526a4ce 100644
@@ -216,6 +216,31 @@ static int __init process_domain_node(
                 bd->kernel->fdt_cmdline = fdt_get_prop_offset(
                     fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
+        else if ( !fdt_node_check_compatible(fdt, node, "multiboot,ramdisk") )
+        {
+            int idx;
+
+            if ( bd->module )
+            {
+                printk(XENLOG_WARNING
+                       "Duplicate module for domain %s\n", name);
+                continue;

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 237

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+            }
+
+            idx = fdt_read_multiboot_module(fdt, node, address_cells,
+                                            size_cells, bi);
+            if ( idx < 0 )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing module for domain %s\n",
+                       name);
+                return -EINVAL;

Propagate fdt_read_multiboot_module()'s error to the caller, i.e.:

                   return idx;

?

Quoted 13 lines
xen/common/domain-builder/fdt.c +6 -1
+            }
+
+            printk(XENLOG_INFO "  module: multiboot-index=%d\n", idx);
+            bi->mods[idx].type = BOOTMOD_RAMDISK;
+            bd->module = &bi->mods[idx];
+        }
     }
 
     if ( !bd->kernel )
--

2.43.0

#31 lore raw

Re: [PATCH v4 08/13] x86/hyperlaunch: locate dom0 initrd with hyperlaunch

Quoted 72 lines · dmkhn
Quoted 58 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Look for a subnode of type multiboot,ramdisk within a domain node and parse via the fdt_read_multiboot_module() helper. After a successful helper call, the module index is returned and the module is guaranteed to be in the module list.

Fix unused typo in adjacent comment.

---
v4:
* s/XENLOG_ERR/XENLOG_WARNING/ on duplicate ramdisk.
* Removed stray ")" in printk
* s/else if/if/ (because of continue)
* Removed trailing continue

---
 xen/arch/x86/setup.c            |  4 ++--
 xen/common/domain-builder/fdt.c | 25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 2 deletions(-)
xen/arch/x86/setup.c +2 -2
index 4cae13163b..76ceb5221f 100644
@@ -2150,11 +2150,11 @@ void asmlinkage __init noreturn __start_xen(void)
      * At this point all capabilities that consume boot modules should have
      * claimed their boot modules. Find the first unclaimed boot module and
      * claim it as the initrd ramdisk. Do a second search to see if there are
-     * any remaining unclaimed boot modules, and report them as unusued initrd
+     * any remaining unclaimed boot modules, and report them as unused initrd
      * candidates.
      */
     initrdidx = first_boot_module_index(bi, BOOTMOD_UNKNOWN);
-    if ( initrdidx < MAX_NR_BOOTMODS )
+    if ( !bi->hyperlaunch_enabled && initrdidx < MAX_NR_BOOTMODS )
     {
         bi->mods[initrdidx].type = BOOTMOD_RAMDISK;
         bi->domains[0].module = &bi->mods[initrdidx];
xen/common/domain-builder/fdt.c +9 -0
index 50fde2d007..c0f526a4ce 100644
@@ -216,6 +216,31 @@ static int __init process_domain_node(
                 bd->kernel->fdt_cmdline = fdt_get_prop_offset(
                     fdt, node, "bootargs", &bd->kernel->cmdline_pa);
         }
+        else if ( !fdt_node_check_compatible(fdt, node, "multiboot,ramdisk") )
+        {
+            int idx;
+
+            if ( bd->module )
+            {
+                printk(XENLOG_WARNING
+                       "Duplicate module for domain %s\n", name);
+                continue;

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 237

Quoted 10 lines
xen/common/domain-builder/fdt.c +10 -0
+            }
+
+            idx = fdt_read_multiboot_module(fdt, node, address_cells,
+                                            size_cells, bi);
+            if ( idx < 0 )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing module for domain %s\n",
+                       name);
+                return -EINVAL;

Propagate fdt_read_multiboot_module()'s error to the caller, i.e.:

Quoted 1 line
                   return idx;

Sure

Cheers,
Alejandro

#32 lore raw

PATCH v4 9/13 x86/hyperlaunch: add domain id parsing to domain config

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to specify the desired domain id for the domain definition. The domain id will be populated in the domid property of the domain node in the device tree configuration.

---
v4:
* Add missing newline
* Adjusted printks
* Checked domid node against list of outstanding domids.

---
 xen/arch/x86/setup.c            |  5 ++--
 xen/common/domain-builder/fdt.c | 51 ++++++++++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 3 deletions(-)
xen/arch/x86/setup.c +3 -2
index 76ceb5221f..04ad2d0937 100644
@@ -1033,8 +1033,9 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( iommu_enabled )
         dom0_cfg.flags |= XEN_DOMCTL_CDF_iommu;
 
-    /* Create initial domain.  Not d0 for pvshim. */
-    bd->domid = get_initial_domain_id();
+    if ( bd->domid == DOMID_INVALID )
+        /* Create initial domain.  Not d0 for pvshim. */
+        bd->domid = get_initial_domain_id();
     d = domain_create(bd->domid, &dom0_cfg, pv_shim ? 0 : CDF_privileged);
     if ( IS_ERR(d) )
         panic("Error creating d%u: %ld\n", bd->domid, PTR_ERR(d));
xen/common/domain-builder/fdt.c +50 -1

74 lines not on this page · raw message

Signature · 1 line
2.43.0
#33 lore raw

Re: [PATCH v4 09/13] x86/hyperlaunch: add domain id parsing to domain config

Quoted 103 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to specify the desired domain id for the domain definition. The domain id will be populated in the domid property of the domain node in the device tree configuration.

---
v4:
* Add missing newline
* Adjusted printks
* Checked domid node against list of outstanding domids.

---
 xen/arch/x86/setup.c            |  5 ++--
 xen/common/domain-builder/fdt.c | 51 ++++++++++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 3 deletions(-)
xen/arch/x86/setup.c +3 -2
index 76ceb5221f..04ad2d0937 100644
@@ -1033,8 +1033,9 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( iommu_enabled )
         dom0_cfg.flags |= XEN_DOMCTL_CDF_iommu;
 
-    /* Create initial domain.  Not d0 for pvshim. */
-    bd->domid = get_initial_domain_id();
+    if ( bd->domid == DOMID_INVALID )
+        /* Create initial domain.  Not d0 for pvshim. */
+        bd->domid = get_initial_domain_id();
     d = domain_create(bd->domid, &dom0_cfg, pv_shim ? 0 : CDF_privileged);
     if ( IS_ERR(d) )
         panic("Error creating d%u: %ld\n", bd->domid, PTR_ERR(d));
xen/common/domain-builder/fdt.c +44 -1
index c0f526a4ce..0d3c713041 100644
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2024, Apertus Solutions, LLC
  */
+#include <xen/domain.h>
 #include <xen/err.h>
 #include <xen/init.h>
 #include <xen/lib.h>
@@ -178,12 +179,54 @@ static int __init fdt_read_multiboot_module(const void *fdt, int node,
 static int __init process_domain_node(
     struct boot_info *bi, const void *fdt, int dom_node)
 {
-    int node;
+    int node, property;
     struct boot_domain *bd = &bi->domains[bi->nr_domains];
     const char *name = fdt_get_name(fdt, dom_node, NULL) ?: "unknown";
     int address_cells = fdt_address_cells(fdt, dom_node);
     int size_cells = fdt_size_cells(fdt, dom_node);
 
+    fdt_for_each_property_offset(property, fdt, dom_node)
+    {
+        const struct fdt_property *prop;
+        const char *prop_name;
+        int name_len, rc;
+
+        prop = fdt_get_property_by_offset(fdt, property, NULL);
+        if ( !prop )
+            continue; /* silently skip */
+
+        prop_name = fdt_get_string(fdt, fdt32_to_cpu(prop->nameoff), &name_len);
+
+        if ( !strncmp(prop_name, "domid", name_len) )
+        {
+            uint32_t val = DOMID_INVALID;
+
+            if ( (rc = fdt_prop_as_u32(prop, &val)) )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing domain id for domain %s\n", name);
+                return rc;
+            }
+            if ( val >= DOMID_FIRST_RESERVED )
+            {
+                printk(XENLOG_ERR "  invalid domain id for domain %s\n", name);
+                return -EINVAL;
+            }
+
+            for ( unsigned int i = 0; i < bi->nr_domains; i++ )
+            {
+                if ( bi->domains[i].domid == val )
+                {
+                    printk(XENLOG_ERR "  duplicate id for domain %s\n", name);
+                    return -EINVAL;
+                }
+            }
+
+            bd->domid = val;
+            printk(XENLOG_INFO "  domid: %d\n", bd->domid);
+        }
+    }
+
     fdt_for_each_subnode(node, fdt, dom_node)
     {
         if ( !fdt_node_check_compatible(fdt, node, "multiboot,kernel") )

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 299

Quoted 8 lines
xen/common/domain-builder/fdt.c +5 -0
@@ -249,6 +292,12 @@ static int __init process_domain_node(
         return -ENODATA;
     }
 
+    if ( bd->domid == DOMID_INVALID )
+        bd->domid = get_initial_domain_id();
+    else if ( bd->domid != get_initial_domain_id() )
+        printk(XENLOG_WARNING
+               "Warning: Unsuported boot with missing initial domid\n");

s/Unsuported/Unsupported/

Also, add bd->domid to the printout?

Quoted 8 lines
xen/common/domain-builder/fdt.c +1 -1
+
     return 0;
 }
 
--

2.43.0

#34 lore raw

Re: [PATCH v4 09/13] x86/hyperlaunch: add domain id parsing to domain config

Quoted 107 lines · dmkhn
Quoted 106 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to specify the desired domain id for the domain definition. The domain id will be populated in the domid property of the domain node in the device tree configuration.

---
v4:
* Add missing newline
* Adjusted printks
* Checked domid node against list of outstanding domids.

---
 xen/arch/x86/setup.c            |  5 ++--
 xen/common/domain-builder/fdt.c | 51 ++++++++++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 3 deletions(-)
xen/arch/x86/setup.c +3 -2
index 76ceb5221f..04ad2d0937 100644
@@ -1033,8 +1033,9 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( iommu_enabled )
         dom0_cfg.flags |= XEN_DOMCTL_CDF_iommu;
 
-    /* Create initial domain.  Not d0 for pvshim. */
-    bd->domid = get_initial_domain_id();
+    if ( bd->domid == DOMID_INVALID )
+        /* Create initial domain.  Not d0 for pvshim. */
+        bd->domid = get_initial_domain_id();
     d = domain_create(bd->domid, &dom0_cfg, pv_shim ? 0 : CDF_privileged);
     if ( IS_ERR(d) )
         panic("Error creating d%u: %ld\n", bd->domid, PTR_ERR(d));
xen/common/domain-builder/fdt.c +44 -1
index c0f526a4ce..0d3c713041 100644
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2024, Apertus Solutions, LLC
  */
+#include <xen/domain.h>
 #include <xen/err.h>
 #include <xen/init.h>
 #include <xen/lib.h>
@@ -178,12 +179,54 @@ static int __init fdt_read_multiboot_module(const void *fdt, int node,
 static int __init process_domain_node(
     struct boot_info *bi, const void *fdt, int dom_node)
 {
-    int node;
+    int node, property;
     struct boot_domain *bd = &bi->domains[bi->nr_domains];
     const char *name = fdt_get_name(fdt, dom_node, NULL) ?: "unknown";
     int address_cells = fdt_address_cells(fdt, dom_node);
     int size_cells = fdt_size_cells(fdt, dom_node);
 
+    fdt_for_each_property_offset(property, fdt, dom_node)
+    {
+        const struct fdt_property *prop;
+        const char *prop_name;
+        int name_len, rc;
+
+        prop = fdt_get_property_by_offset(fdt, property, NULL);
+        if ( !prop )
+            continue; /* silently skip */
+
+        prop_name = fdt_get_string(fdt, fdt32_to_cpu(prop->nameoff), &name_len);
+
+        if ( !strncmp(prop_name, "domid", name_len) )
+        {
+            uint32_t val = DOMID_INVALID;
+
+            if ( (rc = fdt_prop_as_u32(prop, &val)) )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing domain id for domain %s\n", name);
+                return rc;
+            }
+            if ( val >= DOMID_FIRST_RESERVED )
+            {
+                printk(XENLOG_ERR "  invalid domain id for domain %s\n", name);
+                return -EINVAL;
+            }
+
+            for ( unsigned int i = 0; i < bi->nr_domains; i++ )
+            {
+                if ( bi->domains[i].domid == val )
+                {
+                    printk(XENLOG_ERR "  duplicate id for domain %s\n", name);
+                    return -EINVAL;
+                }
+            }
+
+            bd->domid = val;
+            printk(XENLOG_INFO "  domid: %d\n", bd->domid);
+        }
+    }
+
     fdt_for_each_subnode(node, fdt, dom_node)
     {
         if ( !fdt_node_check_compatible(fdt, node, "multiboot,kernel") )
@@ -249,6 +292,12 @@ static int __init process_domain_node(
         return -ENODATA;
     }
 
Quoted 7 lines

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 299

Quoted 5 lines
xen/common/domain-builder/fdt.c +5 -0
+    if ( bd->domid == DOMID_INVALID )
+        bd->domid = get_initial_domain_id();
+    else if ( bd->domid != get_initial_domain_id() )
+        printk(XENLOG_WARNING
+               "Warning: Unsuported boot with missing initial domid\n");

s/Unsuported/Unsupported/

Ack

Quoted 2 lines

Also, add bd->domid to the printout?

Yes, I'll do a rundown of the error strings and ensure they have identifying tokens.

Cheers,
Alejandro

#35 lore raw

PATCH v4 10/13 x86/hyperlaunch: specify dom0 mode with device tree

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Enable selecting the mode in which the domain will be built and ran. This includes:

- whether it will be either a 32/64 bit domain
- if it will be run as a PV or HVM domain
- and if it will require a device model (not applicable for dom0)

In the device tree, this will be represented as a bit map that will be carried through into struct boot_domain.

---
v4:
* printk adjustments
* reject nodes with conflicting mode settings

---
 xen/arch/x86/include/asm/boot-domain.h |  5 +++++
 xen/arch/x86/setup.c                   |  3 ++-
 xen/common/domain-builder/fdt.c        | 21 +++++++++++++++++++++
 3 files changed, 28 insertions(+), 1 deletion(-)
xen/arch/x86/include/asm/boot-domain.h +5 -0
index d7c6042e25..e316d4bcde 100644
@@ -13,6 +13,11 @@
 struct boot_domain {
     domid_t domid;
 
+                                          /* On     | Off    */
+#define BUILD_MODE_PARAVIRT      (1 << 0) /* PV     | PVH/HVM */
+#define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
+    uint32_t mode;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/arch/x86/setup.c +2 -1
index 04ad2d0937..05e3d2cf2a 100644
@@ -1020,7 +1020,8 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     struct boot_domain *bd = &bi->domains[0];
     struct domain *d;
 
-    if ( opt_dom0_pvh )
+    if ( opt_dom0_pvh ||
+         (bi->hyperlaunch_enabled && !(bd->mode & BUILD_MODE_PARAVIRT)) )
     {
         dom0_cfg.flags |= (XEN_DOMCTL_CDF_hvm |
                            ((hvm_hap_supported() && !opt_dom0_shadow) ?
xen/common/domain-builder/fdt.c +21 -0
index 0d3c713041..6809c7f917 100644
@@ -225,6 +225,27 @@ static int __init process_domain_node(
             bd->domid = val;
             printk(XENLOG_INFO "  domid: %d\n", bd->domid);
         }
+        else if ( !strncmp(prop_name, "mode", name_len) )
+        {
+            if ( (rc = fdt_prop_as_u32(prop, &bd->mode)) )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing mode for domain %s\n", name);
+                return rc;
+            }
+
+            if ( (bd->mode & BUILD_MODE_PARAVIRT)  &&
+                 (bd->mode & BUILD_MODE_ENABLE_DM) )
+            {
+                printk(XENLOG_ERR "  mode: invalid (pv+hvm)\n");
+                return -EINVAL;
+            }
+
+            printk(XENLOG_INFO "  mode: %s\n",
+                   (bd->mode & BUILD_MODE_PARAVIRT)  ? "pv"  :
+                   (bd->mode & BUILD_MODE_ENABLE_DM) ? "hvm" :
+                                                       "pvh");
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
Signature · 1 line
2.43.0
Reviewed-by Denis Mukhin on v4 10/13
#36 lore raw

Re: [PATCH v4 10/13] x86/hyperlaunch: specify dom0 mode with device tree

Quoted 9 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Enable selecting the mode in which the domain will be built and ran. This includes:

- whether it will be either a 32/64 bit domain
- if it will be run as a PV or HVM domain
- and if it will require a device model (not applicable for dom0)

Quoted 6 lines

In the device tree, this will be represented as a bit map that will be carried through into struct boot_domain.

Quoted 76 lines

---
v4:
* printk adjustments
* reject nodes with conflicting mode settings

---
 xen/arch/x86/include/asm/boot-domain.h |  5 +++++
 xen/arch/x86/setup.c                   |  3 ++-
 xen/common/domain-builder/fdt.c        | 21 +++++++++++++++++++++
 3 files changed, 28 insertions(+), 1 deletion(-)
xen/arch/x86/include/asm/boot-domain.h +5 -0
index d7c6042e25..e316d4bcde 100644
@@ -13,6 +13,11 @@
 struct boot_domain {
     domid_t domid;
 
+                                          /* On     | Off    */
+#define BUILD_MODE_PARAVIRT      (1 << 0) /* PV     | PVH/HVM */
+#define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
+    uint32_t mode;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/arch/x86/setup.c +2 -1
index 04ad2d0937..05e3d2cf2a 100644
@@ -1020,7 +1020,8 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     struct boot_domain *bd = &bi->domains[0];
     struct domain *d;
 
-    if ( opt_dom0_pvh )
+    if ( opt_dom0_pvh ||
+         (bi->hyperlaunch_enabled && !(bd->mode & BUILD_MODE_PARAVIRT)) )
     {
         dom0_cfg.flags |= (XEN_DOMCTL_CDF_hvm |
                            ((hvm_hap_supported() && !opt_dom0_shadow) ?
xen/common/domain-builder/fdt.c +21 -1
index 0d3c713041..6809c7f917 100644
@@ -225,6 +225,27 @@ static int __init process_domain_node(
             bd->domid = val;
             printk(XENLOG_INFO "  domid: %d\n", bd->domid);
         }
+        else if ( !strncmp(prop_name, "mode", name_len) )
+        {
+            if ( (rc = fdt_prop_as_u32(prop, &bd->mode)) )
+            {
+                printk(XENLOG_ERR
+                       "  failed processing mode for domain %s\n", name);
+                return rc;
+            }
+
+            if ( (bd->mode & BUILD_MODE_PARAVIRT)  &&
+                 (bd->mode & BUILD_MODE_ENABLE_DM) )
+            {
+                printk(XENLOG_ERR "  mode: invalid (pv+hvm)\n");
+                return -EINVAL;
+            }
+
+            printk(XENLOG_INFO "  mode: %s\n",
+                   (bd->mode & BUILD_MODE_PARAVIRT)  ? "pv"  :
+                   (bd->mode & BUILD_MODE_ENABLE_DM) ? "hvm" :
+                                                       "pvh");
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
--

2.43.0

#37 lore raw

PATCH v4 11/13 x86/hyperlaunch: add memory parsing to domain config

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add three properties, memory, mem-min, and mem-max, to the domain node device tree parsing to define the memory allocation for a domain. All three fields are expressed in kb and written as a u64 in the device tree entries.

---
Can't use KB() rather tha SZ_1K, as that's strictly for literals.

v4:
* Don't override fdt_prop_as_u64() rc on error.
* Add separate printk statements for each memory prop error.
* Fix bug setting up dom0_size, dom0_min_size and dom0_max_size
* Was overriding dom0_size on all 3 paths.
* Pre-initialise max_pages of all boot_domains to be LONG_MAX, just as dom0_max_size.
* Eventually dom0_max_size drops out in the bigger series, so we need that logic to be correct.

---
 xen/arch/x86/dom0_build.c              |  8 ++++++
 xen/arch/x86/include/asm/boot-domain.h |  4 +++
 xen/arch/x86/setup.c                   |  5 +++-
 xen/common/domain-builder/fdt.c        | 36 ++++++++++++++++++++++++++
 xen/include/xen/libfdt/libfdt-xen.h    | 10 +++++++
 5 files changed, 62 insertions(+), 1 deletion(-)
xen/arch/x86/dom0_build.c +8 -0
index 0b467fd4a4..8db24dbc0a 100644
@@ -627,6 +627,14 @@ int __init construct_dom0(const struct boot_domain *bd)
 
     process_pending_softirqs();
 
+    /* If param dom0_size was not set and HL config provided memory size */
+    if ( !get_memsize(&dom0_size, ULONG_MAX) && bd->mem_pages )
+        dom0_size.nr_pages = bd->mem_pages;
+    if ( !get_memsize(&dom0_min_size, ULONG_MAX) && bd->min_pages )
+        dom0_min_size.nr_pages = bd->min_pages;
+    if ( !get_memsize(&dom0_max_size, ULONG_MAX) && bd->max_pages )
+        dom0_max_size.nr_pages = bd->max_pages;
+
     if ( is_hvm_domain(d) )
         rc = dom0_construct_pvh(bd);
     else if ( is_pv_domain(d) )
xen/arch/x86/include/asm/boot-domain.h +4 -0
index e316d4bcde..fa8ea1cc66 100644
@@ -18,6 +18,10 @@ struct boot_domain {
 #define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
     uint32_t mode;
 
+    unsigned long mem_pages;
+    unsigned long min_pages;
+    unsigned long max_pages;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/arch/x86/setup.c +4 -1
index 05e3d2cf2a..455dad454c 100644
@@ -296,7 +296,10 @@ static const char *cmdline_cook(const char *p, const char *loader_name);
 struct boot_info __initdata xen_boot_info = {
     .loader = "unknown",
     .cmdline = "",
-    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = { .domid = DOMID_INVALID } },
+    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = {
+        .domid = DOMID_INVALID,
+        .max_pages = ULONG_MAX,
+    }},
 };
 
 static struct boot_info *__init multiboot_fill_boot_info(
xen/common/domain-builder/fdt.c +36 -0
index 6809c7f917..90218d120a 100644
@@ -7,6 +7,7 @@
 #include <xen/init.h>
 #include <xen/lib.h>
 #include <xen/libfdt/libfdt.h>
+#include <xen/sizes.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -246,6 +247,41 @@ static int __init process_domain_node(
                    (bd->mode & BUILD_MODE_ENABLE_DM) ? "hvm" :
                                                        "pvh");
         }
+        else if ( strncmp(prop_name, "memory", name_len) == 0 )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR "  bad \"memory\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->mem_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_ERR "  memory: %lu KiB\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-min", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-min\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->min_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  min memory: %lu kb\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-max", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-max\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->max_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  max memory: %lu KiB\n", kb);
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
xen/include/xen/libfdt/libfdt-xen.h +10 -0
index afc76e7750..3054b48a83 100644
@@ -24,6 +24,16 @@ static inline int __init fdt_prop_as_u32(
     return 0;
 }
 
+static inline int __init fdt_prop_as_u64(
+    const struct fdt_property *prop, uint64_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(uint64_t) )
+        return -EINVAL;
+
+    *val = fdt64_to_cpu(*(const fdt64_t *)prop->data);
+    return 0;
+}
+
 static inline bool __init fdt_get_prop_offset(
     const void *fdt, int node, const char *pname, unsigned long *poffset)
 {
Signature · 1 line
2.43.0
#38 lore raw

Re: [PATCH v4 11/13] x86/hyperlaunch: add memory parsing to domain config

Quoted 11 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add three properties, memory, mem-min, and mem-max, to the domain node device tree parsing to define the memory allocation for a domain. All three fields are expressed in kb and written as a u64 in the device tree entries.

---
Can't use KB() rather tha SZ_1K, as that's strictly for literals.

Oh, that's right! Thanks!

Quoted 81 lines

v4:
* Don't override fdt_prop_as_u64() rc on error.
* Add separate printk statements for each memory prop error.
* Fix bug setting up dom0_size, dom0_min_size and dom0_max_size
* Was overriding dom0_size on all 3 paths.
* Pre-initialise max_pages of all boot_domains to be LONG_MAX, just as dom0_max_size.
* Eventually dom0_max_size drops out in the bigger series, so we need that logic to be correct.

---
 xen/arch/x86/dom0_build.c              |  8 ++++++
 xen/arch/x86/include/asm/boot-domain.h |  4 +++
 xen/arch/x86/setup.c                   |  5 +++-
 xen/common/domain-builder/fdt.c        | 36 ++++++++++++++++++++++++++
 xen/include/xen/libfdt/libfdt-xen.h    | 10 +++++++
 5 files changed, 62 insertions(+), 1 deletion(-)
xen/arch/x86/dom0_build.c +8 -0
index 0b467fd4a4..8db24dbc0a 100644
@@ -627,6 +627,14 @@ int __init construct_dom0(const struct boot_domain *bd)
 
     process_pending_softirqs();
 
+    /* If param dom0_size was not set and HL config provided memory size */
+    if ( !get_memsize(&dom0_size, ULONG_MAX) && bd->mem_pages )
+        dom0_size.nr_pages = bd->mem_pages;
+    if ( !get_memsize(&dom0_min_size, ULONG_MAX) && bd->min_pages )
+        dom0_min_size.nr_pages = bd->min_pages;
+    if ( !get_memsize(&dom0_max_size, ULONG_MAX) && bd->max_pages )
+        dom0_max_size.nr_pages = bd->max_pages;
+
     if ( is_hvm_domain(d) )
         rc = dom0_construct_pvh(bd);
     else if ( is_pv_domain(d) )
xen/arch/x86/include/asm/boot-domain.h +4 -0
index e316d4bcde..fa8ea1cc66 100644
@@ -18,6 +18,10 @@ struct boot_domain {
 #define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
     uint32_t mode;
 
+    unsigned long mem_pages;
+    unsigned long min_pages;
+    unsigned long max_pages;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/arch/x86/setup.c +4 -1
index 05e3d2cf2a..455dad454c 100644
@@ -296,7 +296,10 @@ static const char *cmdline_cook(const char *p, const char *loader_name);
 struct boot_info __initdata xen_boot_info = {
     .loader = "unknown",
     .cmdline = "",
-    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = { .domid = DOMID_INVALID } },
+    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = {
+        .domid = DOMID_INVALID,
+        .max_pages = ULONG_MAX,
+    }},
 };
 
 static struct boot_info *__init multiboot_fill_boot_info(
xen/common/domain-builder/fdt.c +1 -0
index 6809c7f917..90218d120a 100644
@@ -7,6 +7,7 @@
 #include <xen/init.h>
 #include <xen/lib.h>
 #include <xen/libfdt/libfdt.h>
+#include <xen/sizes.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 250

Quoted 4 lines
xen/common/domain-builder/fdt.c +1 -0
@@ -246,6 +247,41 @@ static int __init process_domain_node(
                    (bd->mode & BUILD_MODE_ENABLE_DM) ? "hvm" :
                                                        "pvh");
         }
+        else if ( strncmp(prop_name, "memory", name_len) == 0 )

Use !strncmp(...) like in the below code?

Quoted 44 lines
xen/common/domain-builder/fdt.c +34 -0
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR "  bad \"memory\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->mem_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_ERR "  memory: %lu KiB\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-min", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-min\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->min_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  min memory: %lu kb\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-max", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-max\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->max_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  max memory: %lu KiB\n", kb);
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
xen/include/xen/libfdt/libfdt-xen.h +0 -0
index afc76e7750..3054b48a83 100644
@@ -24,6 +24,16 @@ static inline int __init fdt_prop_as_u32(
     return 0;
 }

xen/include/xen/libfdt/libfdt-xen.h static inline int __init fdt_prop_as_u32( · line 35

Quoted 10 lines
xen/include/xen/libfdt/libfdt-xen.h +9 -0
 
+static inline int __init fdt_prop_as_u64(
+    const struct fdt_property *prop, uint64_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(uint64_t) )
+        return -EINVAL;
+
+    *val = fdt64_to_cpu(*(const fdt64_t *)prop->data);
+    return 0;
+}

Perhaps move the call to common/domain-builder/fdt.c?

Quoted 8 lines
xen/include/xen/libfdt/libfdt-xen.h +1 -1
+
 static inline bool __init fdt_get_prop_offset(
     const void *fdt, int node, const char *pname, unsigned long *poffset)
 {
--

2.43.0

#39 lore raw

Re: [PATCH v4 11/13] x86/hyperlaunch: add memory parsing to domain config

Quoted 93 lines · dmkhn
Quoted 11 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Add three properties, memory, mem-min, and mem-max, to the domain node device tree parsing to define the memory allocation for a domain. All three fields are expressed in kb and written as a u64 in the device tree entries.

---
Can't use KB() rather tha SZ_1K, as that's strictly for literals.

Oh, that's right! Thanks!

Quoted 78 lines

v4:
* Don't override fdt_prop_as_u64() rc on error.
* Add separate printk statements for each memory prop error.
* Fix bug setting up dom0_size, dom0_min_size and dom0_max_size
* Was overriding dom0_size on all 3 paths.
* Pre-initialise max_pages of all boot_domains to be LONG_MAX, just as dom0_max_size.
* Eventually dom0_max_size drops out in the bigger series, so we need that logic to be correct.

---
 xen/arch/x86/dom0_build.c              |  8 ++++++
 xen/arch/x86/include/asm/boot-domain.h |  4 +++
 xen/arch/x86/setup.c                   |  5 +++-
 xen/common/domain-builder/fdt.c        | 36 ++++++++++++++++++++++++++
 xen/include/xen/libfdt/libfdt-xen.h    | 10 +++++++
 5 files changed, 62 insertions(+), 1 deletion(-)
xen/arch/x86/dom0_build.c +8 -0
index 0b467fd4a4..8db24dbc0a 100644
@@ -627,6 +627,14 @@ int __init construct_dom0(const struct boot_domain *bd)
 
     process_pending_softirqs();
 
+    /* If param dom0_size was not set and HL config provided memory size */
+    if ( !get_memsize(&dom0_size, ULONG_MAX) && bd->mem_pages )
+        dom0_size.nr_pages = bd->mem_pages;
+    if ( !get_memsize(&dom0_min_size, ULONG_MAX) && bd->min_pages )
+        dom0_min_size.nr_pages = bd->min_pages;
+    if ( !get_memsize(&dom0_max_size, ULONG_MAX) && bd->max_pages )
+        dom0_max_size.nr_pages = bd->max_pages;
+
     if ( is_hvm_domain(d) )
         rc = dom0_construct_pvh(bd);
     else if ( is_pv_domain(d) )
xen/arch/x86/include/asm/boot-domain.h +4 -0
index e316d4bcde..fa8ea1cc66 100644
@@ -18,6 +18,10 @@ struct boot_domain {
 #define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
     uint32_t mode;
 
+    unsigned long mem_pages;
+    unsigned long min_pages;
+    unsigned long max_pages;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/arch/x86/setup.c +4 -1
index 05e3d2cf2a..455dad454c 100644
@@ -296,7 +296,10 @@ static const char *cmdline_cook(const char *p, const char *loader_name);
 struct boot_info __initdata xen_boot_info = {
     .loader = "unknown",
     .cmdline = "",
-    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = { .domid = DOMID_INVALID } },
+    .domains = { [0 ... MAX_NR_BOOTDOMS - 1] = {
+        .domid = DOMID_INVALID,
+        .max_pages = ULONG_MAX,
+    }},
 };
 
 static struct boot_info *__init multiboot_fill_boot_info(
xen/common/domain-builder/fdt.c +1 -0
index 6809c7f917..90218d120a 100644
@@ -7,6 +7,7 @@
 #include <xen/init.h>
 #include <xen/lib.h>
 #include <xen/libfdt/libfdt.h>
+#include <xen/sizes.h>
 
Quoted 9 lines

xen/common/domain-builder/fdt.c static int __init process_domain_node( · line 250

Quoted 7 lines
xen/common/domain-builder/fdt.c +1 -0
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -246,6 +247,41 @@ static int __init process_domain_node(
                    (bd->mode & BUILD_MODE_ENABLE_DM) ? "hvm" :
                                                        "pvh");
         }
+        else if ( strncmp(prop_name, "memory", name_len) == 0 )

Use !strncmp(...) like in the below code?

Sure

Quoted 46 lines
Quoted 46 lines
xen/common/domain-builder/fdt.c +34 -0
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR "  bad \"memory\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->mem_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_ERR "  memory: %lu KiB\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-min", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-min\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->min_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  min memory: %lu kb\n", kb);
+        }
+        else if ( !strncmp(prop_name, "mem-max", name_len) )
+        {
+            uint64_t kb;
+            if ( (rc = fdt_prop_as_u64(prop, &kb)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"mem-max\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->max_pages = PFN_DOWN(kb * SZ_1K);
+            printk(XENLOG_INFO "  max memory: %lu KiB\n", kb);
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
xen/include/xen/libfdt/libfdt-xen.h +0 -0
index afc76e7750..3054b48a83 100644
@@ -24,6 +24,16 @@ static inline int __init fdt_prop_as_u32(
     return 0;
 }
 
Quoted 11 lines

xen/include/xen/libfdt/libfdt-xen.h static inline int __init fdt_prop_as_u32( · line 35

Quoted 9 lines
xen/include/xen/libfdt/libfdt-xen.h +9 -0
+static inline int __init fdt_prop_as_u64(
+    const struct fdt_property *prop, uint64_t *val)
+{
+    if ( !prop || fdt32_to_cpu(prop->len) < sizeof(uint64_t) )
+        return -EINVAL;
+
+    *val = fdt64_to_cpu(*(const fdt64_t *)prop->data);
+    return 0;
+}

Perhaps move the call to common/domain-builder/fdt.c?

Yes, all new additions to that header ought to have gone to fdt.c instead. That was my original intent, but then didn't go through with everything.

Cheers,
Alejandro

#40 lore raw

PATCH v4 12/13 x86/hyperlaunch: add max vcpu parsing of hyperlaunch device tree

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the cpus property, named as such for dom0less compatibility, that represents the maximum number of vcpus to allocate for a domain. In the device tree, it will be encoded as a u32 value.

---
v4:
* s/UINT_MAX/UINT32_MAX/ (cosmetic, but...)
* s/vpcpus/vcpus/ in commit message.
* Reworded printk()

---
 xen/arch/x86/dom0_build.c              |  3 +++
 xen/arch/x86/include/asm/boot-domain.h |  2 ++
 xen/common/domain-builder/fdt.c        | 11 +++++++++++
 3 files changed, 16 insertions(+)
xen/arch/x86/dom0_build.c +3 -0
index 8db24dbc0a..f734104c74 100644
@@ -635,6 +635,9 @@ int __init construct_dom0(const struct boot_domain *bd)
     if ( !get_memsize(&dom0_max_size, ULONG_MAX) && bd->max_pages )
         dom0_max_size.nr_pages = bd->max_pages;
 
+    if ( opt_dom0_max_vcpus_max == UINT_MAX && bd->max_vcpus )
+        opt_dom0_max_vcpus_max = bd->max_vcpus;
+
     if ( is_hvm_domain(d) )
         rc = dom0_construct_pvh(bd);
     else if ( is_pv_domain(d) )
xen/arch/x86/include/asm/boot-domain.h +2 -0
index fa8ea1cc66..969c02a6ea 100644
@@ -22,6 +22,8 @@ struct boot_domain {
     unsigned long min_pages;
     unsigned long max_pages;
 
+    unsigned int max_vcpus;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/common/domain-builder/fdt.c +11 -0
index 90218d120a..295ab6e8b3 100644
@@ -282,6 +282,17 @@ static int __init process_domain_node(
             bd->max_pages = PFN_DOWN(kb * SZ_1K);
             printk(XENLOG_INFO "  max memory: %lu KiB\n", kb);
         }
+        else if ( !strncmp(prop_name, "cpus", name_len) )
+        {
+            uint32_t val = UINT32_MAX;
+            if ( (rc = fdt_prop_as_u32(prop, &val)) )
+            {
+                printk(XENLOG_ERR "  bad \"cpus\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->max_vcpus = val;
+            printk(XENLOG_INFO "  cpus: %d\n", bd->max_vcpus);
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
Signature · 1 line
2.43.0
Reviewed-by Denis Mukhin on v4 12/13
#41 lore raw

Re: [PATCH v4 12/13] x86/hyperlaunch: add max vcpu parsing of hyperlaunch device tree

Quoted 9 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the cpus property, named as such for dom0less compatibility, that represents the maximum number of vcpus to allocate for a domain. In the device tree, it will be encoded as a u32 value.

Quoted 64 lines

---
v4:
* s/UINT_MAX/UINT32_MAX/ (cosmetic, but...)
* s/vpcpus/vcpus/ in commit message.
* Reworded printk()

---
 xen/arch/x86/dom0_build.c              |  3 +++
 xen/arch/x86/include/asm/boot-domain.h |  2 ++
 xen/common/domain-builder/fdt.c        | 11 +++++++++++
 3 files changed, 16 insertions(+)
xen/arch/x86/dom0_build.c +3 -0
index 8db24dbc0a..f734104c74 100644
@@ -635,6 +635,9 @@ int __init construct_dom0(const struct boot_domain *bd)
     if ( !get_memsize(&dom0_max_size, ULONG_MAX) && bd->max_pages )
         dom0_max_size.nr_pages = bd->max_pages;
 
+    if ( opt_dom0_max_vcpus_max == UINT_MAX && bd->max_vcpus )
+        opt_dom0_max_vcpus_max = bd->max_vcpus;
+
     if ( is_hvm_domain(d) )
         rc = dom0_construct_pvh(bd);
     else if ( is_pv_domain(d) )
xen/arch/x86/include/asm/boot-domain.h +2 -0
index fa8ea1cc66..969c02a6ea 100644
@@ -22,6 +22,8 @@ struct boot_domain {
     unsigned long min_pages;
     unsigned long max_pages;
 
+    unsigned int max_vcpus;
+
     struct boot_module *kernel;
     struct boot_module *module;
     const char *cmdline;
xen/common/domain-builder/fdt.c +11 -1
index 90218d120a..295ab6e8b3 100644
@@ -282,6 +282,17 @@ static int __init process_domain_node(
             bd->max_pages = PFN_DOWN(kb * SZ_1K);
             printk(XENLOG_INFO "  max memory: %lu KiB\n", kb);
         }
+        else if ( !strncmp(prop_name, "cpus", name_len) )
+        {
+            uint32_t val = UINT32_MAX;
+            if ( (rc = fdt_prop_as_u32(prop, &val)) )
+            {
+                printk(XENLOG_ERR "  bad \"cpus\" prop on domain %s\n", name);
+                return rc;
+            }
+            bd->max_vcpus = val;
+            printk(XENLOG_INFO "  cpus: %d\n", bd->max_vcpus);
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
--

2.43.0

#42 lore raw

PATCH v4 13/13 x86/hyperlaunch: add capabilities to boot domain

In reply to Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to assign capabilities to a domain via its definition in device tree. The first capability enabled to select is the control domain capability. The capability property is a bitfield in both the device tree and struct boot_domain.

---
v4:
* Dropped Jason's R-by.
* Refactored caps printinng logic
* It just wasn't xenlog-compatible as it was.
* Moved pv_shim check to builder_init, so the capability is just not given.
* And inlined the create_flags variable now that's tractable.
* Validated input capabilities after coming out of the DT.

---
 xen/arch/x86/include/asm/boot-domain.h |  5 +++++
 xen/arch/x86/setup.c                   |  3 ++-
 xen/common/domain-builder/core.c       |  2 ++
 xen/common/domain-builder/fdt.c        | 20 ++++++++++++++++++++
 4 files changed, 29 insertions(+), 1 deletion(-)
xen/arch/x86/include/asm/boot-domain.h +5 -0
index 969c02a6ea..5c143d82af 100644
@@ -13,6 +13,11 @@
 struct boot_domain {
     domid_t domid;
 
+#define BUILD_CAPS_NONE          (0U)
+#define BUILD_CAPS_CONTROL       (1U << 0)
+#define BUILD_CAPS__ALL          BUILD_CAPS_CONTROL
+    uint32_t capabilities;
+
                                           /* On     | Off    */
 #define BUILD_MODE_PARAVIRT      (1 << 0) /* PV     | PVH/HVM */
 #define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
xen/arch/x86/setup.c +2 -1
index 455dad454c..3cdd8bc2f9 100644
@@ -1040,7 +1040,8 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( bd->domid == DOMID_INVALID )
         /* Create initial domain.  Not d0 for pvshim. */
         bd->domid = get_initial_domain_id();
-    d = domain_create(bd->domid, &dom0_cfg, pv_shim ? 0 : CDF_privileged);
+    d = domain_create(bd->domid, &dom0_cfg,
+            (bd->capabilities & BUILD_CAPS_CONTROL) ? CDF_privileged : 0);
     if ( IS_ERR(d) )
         panic("Error creating d%u: %ld\n", bd->domid, PTR_ERR(d));
 
xen/common/domain-builder/core.c +2 -0
index 4b4230f2ff..d1a5d6125e 100644
@@ -8,6 +8,7 @@
 #include <xen/lib.h>
 
 #include <asm/bootinfo.h>
+#include <asm/pv/shim.h>
 #include <asm/setup.h>
 
 #include "fdt.h"
@@ -93,6 +94,7 @@ void __init builder_init(struct boot_info *bi)
 
         bi->mods[i].type = BOOTMOD_KERNEL;
         bi->domains[0].kernel = &bi->mods[i];
+        bi->domains[0].capabilities |= pv_shim ? 0 : BUILD_CAPS_CONTROL;
         bi->nr_domains = 1;
     }
 }
xen/common/domain-builder/fdt.c +20 -0
index 295ab6e8b3..3e3a84e2d0 100644
@@ -293,6 +293,26 @@ static int __init process_domain_node(
             bd->max_vcpus = val;
             printk(XENLOG_INFO "  cpus: %d\n", bd->max_vcpus);
         }
+        else if ( !strncmp(prop_name, "capabilities", name_len) )
+        {
+            if ( (rc = fdt_prop_as_u32(prop, &bd->capabilities)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"capabilities\" on domain %s\n", name);
+                return rc;
+            }
+
+            if ( bd->capabilities & ~BUILD_CAPS__ALL )
+            {
+                printk(XENLOG_WARNING "  unknown capabilities: %#x\n",
+                       bd->capabilities & ~BUILD_CAPS__ALL);
+
+                bd->capabilities &= BUILD_CAPS__ALL;
+            }
+
+            printk(XENLOG_INFO "  caps: %s\n",
+                   bd->capabilities & BUILD_CAPS_CONTROL ? "c" : "");
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
Signature · 1 line
2.43.0
Reviewed-by Denis Mukhin on v4 13/13
#43 lore raw

Re: [PATCH v4 13/13] x86/hyperlaunch: add capabilities to boot domain

Quoted 10 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to assign capabilities to a domain via its definition in device tree. The first capability enabled to select is the control domain capability. The capability property is a bitfield in both the device tree and struct boot_domain.

Quoted 100 lines

---
v4:
* Dropped Jason's R-by.
* Refactored caps printinng logic
* It just wasn't xenlog-compatible as it was.
* Moved pv_shim check to builder_init, so the capability is just not given.
* And inlined the create_flags variable now that's tractable.
* Validated input capabilities after coming out of the DT.

---
 xen/arch/x86/include/asm/boot-domain.h |  5 +++++
 xen/arch/x86/setup.c                   |  3 ++-
 xen/common/domain-builder/core.c       |  2 ++
 xen/common/domain-builder/fdt.c        | 20 ++++++++++++++++++++
 4 files changed, 29 insertions(+), 1 deletion(-)
xen/arch/x86/include/asm/boot-domain.h +5 -0
index 969c02a6ea..5c143d82af 100644
@@ -13,6 +13,11 @@
 struct boot_domain {
     domid_t domid;
 
+#define BUILD_CAPS_NONE          (0U)
+#define BUILD_CAPS_CONTROL       (1U << 0)
+#define BUILD_CAPS__ALL          BUILD_CAPS_CONTROL
+    uint32_t capabilities;
+
                                           /* On     | Off    */
 #define BUILD_MODE_PARAVIRT      (1 << 0) /* PV     | PVH/HVM */
 #define BUILD_MODE_ENABLE_DM     (1 << 1) /* HVM    | PVH     */
xen/arch/x86/setup.c +2 -1
index 455dad454c..3cdd8bc2f9 100644
@@ -1040,7 +1040,8 @@ static struct domain *__init create_dom0(struct boot_info *bi)
     if ( bd->domid == DOMID_INVALID )
         /* Create initial domain.  Not d0 for pvshim. */
         bd->domid = get_initial_domain_id();
-    d = domain_create(bd->domid, &dom0_cfg, pv_shim ? 0 : CDF_privileged);
+    d = domain_create(bd->domid, &dom0_cfg,
+            (bd->capabilities & BUILD_CAPS_CONTROL) ? CDF_privileged : 0);
     if ( IS_ERR(d) )
         panic("Error creating d%u: %ld\n", bd->domid, PTR_ERR(d));
 
xen/common/domain-builder/core.c +2 -0
index 4b4230f2ff..d1a5d6125e 100644
@@ -8,6 +8,7 @@
 #include <xen/lib.h>
 
 #include <asm/bootinfo.h>
+#include <asm/pv/shim.h>
 #include <asm/setup.h>
 
 #include "fdt.h"
@@ -93,6 +94,7 @@ void __init builder_init(struct boot_info *bi)
 
         bi->mods[i].type = BOOTMOD_KERNEL;
         bi->domains[0].kernel = &bi->mods[i];
+        bi->domains[0].capabilities |= pv_shim ? 0 : BUILD_CAPS_CONTROL;
         bi->nr_domains = 1;
     }
 }
xen/common/domain-builder/fdt.c +20 -1
index 295ab6e8b3..3e3a84e2d0 100644
@@ -293,6 +293,26 @@ static int __init process_domain_node(
             bd->max_vcpus = val;
             printk(XENLOG_INFO "  cpus: %d\n", bd->max_vcpus);
         }
+        else if ( !strncmp(prop_name, "capabilities", name_len) )
+        {
+            if ( (rc = fdt_prop_as_u32(prop, &bd->capabilities)) )
+            {
+                printk(XENLOG_ERR
+                       "  bad \"capabilities\" on domain %s\n", name);
+                return rc;
+            }
+
+            if ( bd->capabilities & ~BUILD_CAPS__ALL )
+            {
+                printk(XENLOG_WARNING "  unknown capabilities: %#x\n",
+                       bd->capabilities & ~BUILD_CAPS__ALL);
+
+                bd->capabilities &= BUILD_CAPS__ALL;
+            }
+
+            printk(XENLOG_INFO "  caps: %s\n",
+                   bd->capabilities & BUILD_CAPS_CONTROL ? "c" : "");
+        }
     }
 
     fdt_for_each_subnode(node, fdt, dom_node)
--

2.43.0

#44 lore raw

Re: [PATCH v4 13/13] x86/hyperlaunch: add capabilities to boot domain

Quoted 8 lines · dmkhn
Quoted 7 lines · Alejandro Vallejo

From: "Daniel P. Smith" <[email protected]>

Introduce the ability to assign capabilities to a domain via its definition in device tree. The first capability enabled to select is the control domain capability. The capability property is a bitfield in both the device tree and struct boot_domain.

Quoted 5 lines
Quoted 3 lines

Thanks

Though now that CDF_hardware has been introduced to staging, this will have to change to introduce BUILD_CAPS_HARDWARE as well.

Cheers,
Alejandro

#45 lore raw
In reply to Alejandro Vallejo
Quoted 58 lines · Alejandro Vallejo

Hi,

Here's a new version. Took a while to integrate all the feedback, but here it is.

v4 pipeline: https://gitlab.com/xen-project/people/agvallejo/xen/-/pipelines/1772300721

v3: https://lore.kernel.org/xen-devel/[email protected]/
v2: https://lore.kernel.org/xen-devel/[email protected]/
v1: https://lore.kernel.org/xen-devel/[email protected]/

Cheers,
Alejandro

========= Original cover letter:

The Hyperlaunch device tree for dom0 series is the second split out for the introduction of the Hyperlaunch domain builder logic. These changes focus on introducing the ability to express a domain configuration that is then used to populate the struct boot_domain structure for dom0. This ability to express a domain configuration provides the next step towards a general domain builder.

The splitting of Hyperlaunch into a set of series are twofold, to reduce the effort in reviewing a much larger series, and to reduce the effort in handling the knock-on effects to the construction logic from requested review changes.

Alejandro Vallejo (1):
x86/hyperlaunch: Add helpers to locate multiboot modules

Daniel P. Smith (12):
x86/boot: add cmdline to struct boot_domain
kconfig: introduce domain builder config options common/hyperlaunch: introduce the domain builder x86/hyperlaunch: initial support for hyperlaunch device tree x86/hyperlaunch: locate dom0 kernel with hyperlaunch x86/hyperlaunch: obtain cmdline from device tree x86/hyperlaunch: locate dom0 initrd with hyperlaunch x86/hyperlaunch: add domain id parsing to domain config x86/hyperlaunch: specify dom0 mode with device tree x86/hyperlaunch: add memory parsing to domain config x86/hyperlaunch: add max vcpu parsing of hyperlaunch device tree x86/hyperlaunch: add capabilities to boot domain

 xen/arch/x86/Kconfig                   |   1 +
 xen/arch/x86/dom0_build.c              |  11 +
 xen/arch/x86/hvm/dom0_build.c          |  31 +-
 xen/arch/x86/include/asm/boot-domain.h |  17 +
 xen/arch/x86/include/asm/bootinfo.h    |  10 +-
 xen/arch/x86/pv/dom0_build.c           |   4 +-
 xen/arch/x86/setup.c                   |  91 +++--
 xen/common/Kconfig                     |   5 +
 xen/common/Makefile                    |   1 +
 xen/common/domain-builder/Kconfig      |  18 +
 xen/common/domain-builder/Makefile     |   2 +
 xen/common/domain-builder/core.c       | 110 ++++++
 xen/common/domain-builder/fdt.c        | 488 +++++++++++++++++++++++++
 xen/common/domain-builder/fdt.h        |  39 ++
 xen/include/xen/domain-builder.h       |  13 +
Quoted 8 lines
 xen/include/xen/libfdt/libfdt-xen.h    |  44 +++
 16 files changed, 839 insertions(+), 46 deletions(-)
 create mode 100644 xen/common/domain-builder/Kconfig
 create mode 100644 xen/common/domain-builder/Makefile
 create mode 100644 xen/common/domain-builder/core.c
 create mode 100644 xen/common/domain-builder/fdt.c
 create mode 100644 xen/common/domain-builder/fdt.h
 create mode 100644 xen/include/xen/domain-builder.h

Bah, I just noticed after sending. The commit messages of the last 10 patches are meant to be common/hyperlaunch. Or just hyperlaunch.

It _is_ effectively still x86-only, but it's living under common.

Cheers,
Alejandro