FAILED: patch "[PATCH] phy: freescale: imx8m-pcie: assert phy reset and perst in" failed to apply to 6.1-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x aecb63e88c5e5fb9afb782a1577264c76f179af9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025041739-buffoon-panorama-8f27@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From aecb63e88c5e5fb9afb782a1577264c76f179af9 Mon Sep 17 00:00:00 2001
From: Stefan Eichenberger <[email protected]>
Date: Wed, 5 Mar 2025 15:43:16 +0100
Subject: [PATCH] phy: freescale: imx8m-pcie: assert phy reset and perst in
power off
Ensure the PHY reset and perst is asserted during power-off to guarantee it is in a reset state upon repeated power-on calls. This resolves an issue where the PHY may not properly initialize during subsequent power-on cycles. Power-on will deassert the reset at the appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110 imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring the PHY is in reset during power-on, thus preventing PHY PLL failures.
drivers/phy/freescale/phy-fsl-imx8m-pcie.c +11 -0
@@ -156,6 +156,16 @@ static int imx8_pcie_phy_power_on(struct phy *phy)return ret; } +static int imx8_pcie_phy_power_off (struct phy *phy) +{ +struct imx8_pcie_phy *imx8_phy =phy_get_drvdata (phy); + +reset_control_assert (imx8_phy->reset); +reset_control_assert (imx8_phy->perst); + +return 0 ; +} +static int imx8_pcie_phy_init (struct phy *phy) {struct imx8_pcie_phy *imx8_phy =phy_get_drvdata (phy);
@@ -176,6 +186,7 @@ static const struct phy_ops imx8_pcie_phy_ops = { .init = imx8_pcie_phy_init, .exit = imx8_pcie_phy_exit, .power_on = imx8_pcie_phy_power_on, + .power_off = imx8_pcie_phy_power_off, .owner = THIS_MODULE, };