efi: Don't initalize SEV-SNP from the EFI stub
v3 cover efi: Don't initalize SEV-SNP from the EFI stub
From: Ard Biesheuvel <[email protected]>
Changes since v2: [1]
- rebase onto tip/x86/boot
- add patch to remove unused static inline fallback implementation of sev_enable()
Changes since v1: [0]
- address shortcomings pointed out by Tom, related to missing checks and to discovery of the CC blob table from the EFI stub
[0] https://lore.kernel.org/all/[email protected]/T/#u
[1] https://lore.kernel.org/all/[email protected]/T/#u
Ard Biesheuvel (5):
x86/boot: Drop unused sev_enable() fallback x86/efistub: Obtain SEV CC blob address from the stub x86/boot: Drop redundant RMPADJUST in SEV SVSM presence check x86/sev: Unify SEV-SNP hypervisor feature check x86/efistub: Don't bother enabling SEV in the EFI stub
arch/x86/boot/compressed/misc.h | 11 ------- arch/x86/boot/compressed/sev.c | 33 +------------------- arch/x86/boot/startup/sev-shared.c | 33 +++++++++++++++----- arch/x86/boot/startup/sme.c | 2 ++ arch/x86/coco/sev/core.c | 11 ------- arch/x86/include/asm/sev-internal.h | 3 +- arch/x86/include/asm/sev.h | 4 +-- drivers/firmware/efi/libstub/x86-stub.c | 27 +++++++++------- 8 files changed, 48 insertions(+), 76 deletions(-)
base-commit: ff4c0560ab020d34baf0aa6434f66333d25ae524
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
PATCH v3 1/5 x86/boot: Drop unused sev_enable() fallback
From: Ard Biesheuvel <[email protected]>
The misc.h header is not included by the EFI stub, which is the only C caller of sev_enable(). This means the fallback for cases where CONFIG_AMD_MEM_ENCRYPT is not set is never used, so it can be dropped.
--- arch/x86/boot/compressed/misc.h | 11 ----------- 1 file changed, 11 deletions(-)
arch/x86/boot/compressed/misc.h +0 -11
@@ -144,17 +144,6 @@ void snp_set_page_private(unsigned long paddr);void snp_set_page_shared (unsigned long paddr);void sev_prep_identity_maps (unsigned long top_level_pgt);#else -static inline void sev_enable (struct boot_params *bp) -{ -/* -* bp->cc_blob_address should only be set by boot/compressed kernel. -* Initialize it to 0 unconditionally (thus here in this stub too) to -* ensure that uninitialized values from buggy bootloaders aren't -* propagated. -*/ -if (bp) - bp->cc_blob_address =0 ; -}static inline void snp_check_features (void ) { }static inline void sev_es_shutdown_ghcb (void ) { }static inline bool sev_es_check_ghcb_fault (unsigned long address)
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
PATCH v3 2/5 x86/efistub: Obtain SEV CC blob address from the stub
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
The x86 EFI stub no longer boots the core kernel via the traditional decompressor but jumps straight to it, avoiding all the page fault handling and other complexity that is entirely unnecessary when booting via EFI, which guarantees that all system memory is mapped 1:1.
The SEV startup code in the core kernel expects the address of the CC blob configuration table in boot_params, so store it there when booting from EFI with SEV-SNP enabled. This removes the need to call sev_enable() from the EFI stub.
--- drivers/firmware/efi/libstub/x86-stub.c | 21 +++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
drivers/firmware/efi/libstub/x86-stub.c +16 -5
@@ -681,17 +681,28 @@ static efi_status_t exit_boot(struct boot_params *boot_params, void *handle)return EFI_SUCCESS ; } -static bool have_unsupported_snp_features (void ) +static bool check_snp_features (struct boot_params *bp) { +u64 status =sev_get_status ();u64 unsupported; - unsupported =snp_get_unsupported_features (sev_get_status ()); + unsupported =snp_get_unsupported_features (status);if (unsupported) {efi_err ("Unsupported SEV-SNP features detected: 0x%llx\n" , unsupported); -return true; +return false; } -return false; + +if (status &MSR_AMD64_SEV_SNP_ENABLED ) { +void *tbl =get_efi_config_table (EFI_CC_BLOB_GUID ); + +if (!tbl) { +efi_err ("SEV-SNP is enabled but CC blob not found\n" ); +return false; + } + bp->cc_blob_address = (u32 )(unsigned long )tbl; + } +return true; }static void efi_get_seed (void *seed,int size)
@@ -829,7 +840,7 @@ void __noreturn efi_stub_entry(efi_handle_t handle, hdr = &boot_params->hdr; -if (have_unsupported_snp_features ()) +if (!check_snp_features (boot_params))efi_exit (handle,EFI_UNSUPPORTED );if (IS_ENABLED (CONFIG_EFI_DXE_MEM_ATTRIBUTES )) {
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
PATCH v3 3/5 x86/boot: Drop redundant RMPADJUST in SEV SVSM presence check
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
snp_vmpl will be assigned a non-zero value when executing at a VMPL other than 0, and this is inferred from a call to RMPADJUST, which only works when running at VMPL0.
This means that testing snp_vmpl is sufficient, and there is no need to perform the same check again.
--- arch/x86/boot/compressed/sev.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-)
arch/x86/boot/compressed/sev.c +3 -17
@@ -582,30 +582,16 @@ void sev_enable(struct boot_params *bp)*/ if (sev_status &MSR_AMD64_SEV_SNP_ENABLED ) {u64 hv_features; -int ret; hv_features =get_hv_features ();if (!(hv_features &GHCB_HV_FT_SNP ))sev_es_terminate (SEV_TERM_SET_GEN ,GHCB_SNP_UNSUPPORTED );/* -* Enforce running at VMPL0 or with an SVSM. -* -* Use RMPADJUST (see the rmpadjust() function for a description of -* what the instruction does) to update the VMPL1 permissions of a -* page. If the guest is running at VMPL0, this will succeed. If the -* guest is running at any other VMPL, this will fail. Linux SNP guests -* only ever run at a single VMPL level so permission mask changes of a -* lesser-privileged VMPL are a don't-care. +* Running at VMPL0 is required unless an SVSM is present and +* the hypervisor supports the required SVSM GHCB events. */ - ret =rmpadjust ((unsigned long )&boot_ghcb_page,RMP_PG_SIZE_4K ,1 ); - -/* -* Running at VMPL0 is not required if an SVSM is present and the hypervisor -* supports the required SVSM GHCB events. -*/ -if (ret && - !(snp_vmpl && (hv_features &GHCB_HV_FT_SNP_MULTI_VMPL ))) +if (snp_vmpl >0 && !(hv_features &GHCB_HV_FT_SNP_MULTI_VMPL ))sev_es_terminate (SEV_TERM_SET_LINUX ,GHCB_TERM_NOT_VMPL0 ); }
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
PATCH v3 4/5 x86/sev: Unify SEV-SNP hypervisor feature check
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
The decompressor and the core kernel both check the hypervisor feature mask exposed by the hypervisor, but test it in slightly different ways.
This disparity seems unintentional, and simply a result of the fact that the decompressor and the core kernel evolve differently over time when it comes to setting up the SEV-SNP execution context.
So move the HV feature check into a helper function and call that instead. For the core kernel, move the check to an earlier boot stage, right after the point where it is established that the guest is executing in SEV-SNP mode.
--- arch/x86/boot/compressed/sev.c | 19 +---------- arch/x86/boot/startup/sev-shared.c | 33 +++++++++++++++----- arch/x86/boot/startup/sme.c | 2 ++ arch/x86/coco/sev/core.c | 11 ------- arch/x86/include/asm/sev-internal.h | 3 +- arch/x86/include/asm/sev.h | 2 ++ 6 files changed, 32 insertions(+), 38 deletions(-)
arch/x86/boot/compressed/sev.c +1 -18
@@ -576,24 +576,7 @@ void sev_enable(struct boot_params *bp)sev_es_terminate (SEV_TERM_SET_GEN ,GHCB_SEV_ES_PROT_UNSUPPORTED ); } -/* -* SNP is supported in v2 of the GHCB spec which mandates support for HV -* features. -*/ -if (sev_status &MSR_AMD64_SEV_SNP_ENABLED ) { -u64 hv_features; - - hv_features =get_hv_features (); -if (!(hv_features &GHCB_HV_FT_SNP )) -sev_es_terminate (SEV_TERM_SET_GEN ,GHCB_SNP_UNSUPPORTED ); - -/* -* Running at VMPL0 is required unless an SVSM is present and -* the hypervisor supports the required SVSM GHCB events. -*/ -if (snp_vmpl >0 && !(hv_features &GHCB_HV_FT_SNP_MULTI_VMPL )) -sev_es_terminate (SEV_TERM_SET_LINUX ,GHCB_TERM_NOT_VMPL0 ); - } +snp_check_hv_features ();if (snp && !(sev_status &MSR_AMD64_SEV_SNP_ENABLED ))error ("SEV-SNP supported indicated by CC blob, but not SEV status MSR." );
arch/x86/boot/startup/sev-shared.c +26 -7
@@ -94,16 +94,10 @@ sev_es_terminate(unsigned int set, unsigned int reason) asmvolatile ("hlt\n" : : :"memory" ); } -/* -* The hypervisor features are available from GHCB version 2 onward. -*/ -u64 get_hv_features (void ) +static u64 __head get_hv_features(void) {u64 val; -if (ghcb_version <2 ) -return 0 ; -sev_es_wr_ghcb_msr (GHCB_MSR_HV_FT_REQ );VMGEXIT ();
@@ -114,6 +108,31 @@ u64 get_hv_features(void)return GHCB_MSR_HV_FT_RESP_VAL (val); } +u64 __head snp_check_hv_features(void) +{ +/* +* SNP is supported in v2 of the GHCB spec which mandates support for HV +* features. +*/ +if (sev_status &MSR_AMD64_SEV_SNP_ENABLED ) { +u64 hv_features; + + hv_features =get_hv_features (); +if (!(hv_features &GHCB_HV_FT_SNP )) +sev_es_terminate (SEV_TERM_SET_GEN ,GHCB_SNP_UNSUPPORTED ); + +/* +* Running at VMPL0 is required unless an SVSM is present and +* the hypervisor supports the required SVSM GHCB events. +*/ +if (snp_vmpl >0 && !(hv_features &GHCB_HV_FT_SNP_MULTI_VMPL )) +sev_es_terminate (SEV_TERM_SET_LINUX ,GHCB_TERM_NOT_VMPL0 ); + +return hv_features; + } +return 0 ; +} +void snp_register_ghcb_early (unsigned long paddr) {unsigned long pfn = paddr >>PAGE_SHIFT ;
arch/x86/boot/startup/sme.c +2 -0
@@ -533,6 +533,8 @@ void __head sme_enable(struct boot_params *bp)if (snp_en ^ !!(msr &MSR_AMD64_SEV_SNP_ENABLED ))snp_abort (); + sev_hv_features =snp_check_hv_features (); +/* Check if memory encryption is enabled */ if (feature_mask ==AMD_SME_BIT ) {if (!(bp->hdr.xloadflags &XLF_MEM_ENCRYPTION ))
arch/x86/coco/sev/core.c +0 -11
@@ -1170,17 +1170,6 @@ void __init sev_es_init_vc_handling(void)if (!sev_es_check_cpu_features ())panic ("SEV-ES CPU Features missing" ); -/* -* SNP is supported in v2 of the GHCB spec which mandates support for HV -* features. -*/ -if (cc_platform_has (CC_ATTR_GUEST_SEV_SNP )) { - sev_hv_features =get_hv_features (); - -if (!(sev_hv_features &GHCB_HV_FT_SNP )) -sev_es_terminate (SEV_TERM_SET_GEN ,GHCB_SNP_UNSUPPORTED ); - } -/* Initialize per-cpu GHCB pages */ for_each_possible_cpu (cpu) {alloc_runtime_data (cpu);
arch/x86/include/asm/sev-internal.h +1 -2
@@ -4,7 +4,6 @@extern struct ghcb boot_ghcb_page;extern struct ghcb *boot_ghcb; -extern u64 sev_hv_features;/* #VC handler runtime per-CPU data */ struct sev_es_runtime_data {
@@ -107,6 +106,6 @@ enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,void snp_register_ghcb_early (unsigned long paddr);bool sev_es_negotiate_protocol (void );bool sev_es_check_cpu_features (void ); -u64 get_hv_features (void ); +void check_hv_features (void );const struct snp_cpuid_table *snp_cpuid_get_table (void );
arch/x86/include/asm/sev.h +2 -0
@@ -418,6 +418,7 @@ struct svsm_call {#ifdef CONFIG_AMD_MEM_ENCRYPT extern u8 snp_vmpl; +extern u64 sev_hv_features;extern void __sev_es_ist_enter (struct pt_regs *regs);extern void __sev_es_ist_exit (void );
@@ -494,6 +495,7 @@ void snp_set_memory_private(unsigned long vaddr, unsigned long npages);void snp_set_wakeup_secondary_cpu (void );bool snp_init (struct boot_params *bp);void __noreturn snp_abort (void ); +u64 snp_check_hv_features (void );void snp_dmi_setup (void );int snp_issue_svsm_attest_req (u64 call_id,struct svsm_call *call,struct svsm_attest_call *input);void snp_accept_memory (phys_addr_t start,phys_addr_t end);
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
PATCH v3 5/5 x86/efistub: Don't bother enabling SEV in the EFI stub
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
One of the last things the EFI stub does before handing over to the core kernel when booting as a SEV guest is enabling SEV, even though this is mostly redundant: one of the first things the core kernel does is calling sme_enable(), after setting up the early GDT and IDT but before even setting up the kernel page tables. sme_enable() performs the same SEV-SNP initialization that the decompressor performs in sev_enable().
So let's just drop this call to sev_enable(), and rely on the core kernel to initiaize SEV correctly.
--- arch/x86/include/asm/sev.h | 2 -- drivers/firmware/efi/libstub/x86-stub.c | 6 ------ 2 files changed, 8 deletions(-)
arch/x86/include/asm/sev.h +0 -2
@@ -443,7 +443,6 @@ static __always_inline void sev_es_nmi_complete(void)__sev_es_nmi_complete (); }extern int __init sev_es_efi_map_ghcbs (pgd_t *pgd); -extern void sev_enable (struct boot_params *bp);/* * RMPADJUST modifies the RMP permissions of a page of a lesser-
@@ -531,7 +530,6 @@ static inline void sev_es_ist_exit(void) { }static inline int sev_es_setup_ap_jump_table (struct real_mode_header *rmh) {return 0 ; }static inline void sev_es_nmi_complete (void ) { }static inline int sev_es_efi_map_ghcbs (pgd_t *pgd) {return 0 ; } -static inline void sev_enable (struct boot_params *bp) { }static inline int pvalidate (unsigned long vaddr,bool rmp_psize,bool validate) {return 0 ; }static inline int rmpadjust (unsigned long vaddr,bool rmp_psize,unsigned long attrs) {return 0 ; }static inline void setup_ghcb (void ) { }
drivers/firmware/efi/libstub/x86-stub.c +0 -6
@@ -936,12 +936,6 @@ void __noreturn efi_stub_entry(efi_handle_t handle, goto fail; } -/* -* Call the SEV init code while still running with the firmware's -* GDT/IDT, so #VC exceptions will be handled by EFI. -*/ -sev_enable (boot_params); -efi_5level_switch ();enter_kernel (kernel_entry, boot_params);
Signature · 1 line
2.49.0.805.g082f7c87e0-goog
Quoted 2 lines · Ard Biesheuvel
From: Ard Biesheuvel <[email protected]>
Hi Ard,
I'll try to get to reviewing and testing this series very soon. But one thing I can see is that we never set the snp_vmpl level anymore in the EFI stub and so PVALIDATE will fail when running under an SVSM.
But I don't think this series is completely at fault. This goes back to fixing memory acceptance before sev_enable() was called and I missed the SVSM situation. So I don't think we can completely remove all SNP initialization and might have to do svsm_setup_ca() which has a pre-req on setup_cpuid_table()... sigh.
Thanks,
Tom
Quoted 36 lines
Changes since v2: [1]
- rebase onto tip/x86/boot
- add patch to remove unused static inline fallback implementation ofsev_enable()Changes since v1: [0]
- address shortcomings pointed out by Tom, related to missing checks and to discovery of the CC blob table from the EFI stub[0] https://lore.kernel.org/all/[email protected]/T/#u
[1] https://lore.kernel.org/all/[email protected]/T/#uCc Tom Lendacky <[email protected]>Cc Borislav Petkov <[email protected]>Cc Dionna Amalie Glaze <[email protected]>Cc Kevin Loughlin <[email protected]>Ard Biesheuvel (5):
x86/boot: Drop unusedsev_enable()fallback x86/efistub: Obtain SEV CC blob address from the stub x86/boot: Drop redundant RMPADJUST in SEV SVSM presence check x86/sev: Unify SEV-SNP hypervisor feature check x86/efistub: Don't bother enabling SEV in the EFI stubarch/x86/boot/compressed/misc.h | 11 ------- arch/x86/boot/compressed/sev.c | 33 +------------------- arch/x86/boot/startup/sev-shared.c | 33 +++++++++++++++----- arch/x86/boot/startup/sme.c | 2 ++ arch/x86/coco/sev/core.c | 11 ------- arch/x86/include/asm/sev-internal.h | 3 +- arch/x86/include/asm/sev.h | 4 +-- drivers/firmware/efi/libstub/x86-stub.c | 27 +++++++++------- 8 files changed, 48 insertions(+), 76 deletions(-)base-commit:
ff4c0560ab020d34baf0aa6434f66333d25ae524
Quoted 8 lines · Tom Lendacky
Quoted 2 lines · Ard Biesheuvel
From: Ard Biesheuvel <[email protected]>
Hi Ard,
I'll try to get to reviewing and testing this series very soon.
Thanks.
Quoted 10 lines
But one
thing I can see is that we never set thesnp_vmpllevel anymore in the EFI stub and so PVALIDATE will fail when running under an SVSM.But I don't think this series is completely at fault. This goes back to fixing memory acceptance before
sev_enable()was called and I missed the SVSM situation. So I don't think we can completely remove all SNP initialization and might have to dosvsm_setup_ca()which has a pre-req onsetup_cpuid_table()... sigh.
OK, so memory acceptance from the EFI stub is still broken even when using the MSR protocol, right?
But SVSM is relatively recent, and so we probably have more leeway to fix it properly. And I assume the firmware itself can be expected to have its own working configuration to communicate with the VMM and/or the hypervisor?
This hybrid mode of executing in the firmware execution context but taking control of everything under the hood is really a maintenance nightmare, and so I'd rather do less of that than more of that. If that implies that we need to re-engineer the early memory acceptance and the population of the unaccepted memory table, I still think we need to consider it. Ultimately, the memory acceptance in the stub is not fundamentally needed, it is only there because there is a mismatch between the table's granularity and the EFI memory map granularity. In fact, given that this appears to be a rare occurrence anyway, and ultimately under the control of the firmware (which we can also fix), we might simply decide to use an unaccepted memory table with 4k granularity unless all existing regions unaccepted memory regions are aligned to 2M.
Ard Biesheuvel
maintainerQuoted 4 lines · Ard Biesheuvel
Quoted 2 lines · Tom Lendacky
On 4/22/25 05:07, Ard Biesheuvel wrote:
Quoted 19 lines
Quoted 6 lines
Quoted 2 lines
From: Ard Biesheuvel <[email protected]>
Hi Ard,
I'll try to get to reviewing and testing this series very soon.
Thanks.
Quoted 10 lines
But one
thing I can see is that we never set thesnp_vmpllevel anymore in the EFI stub and so PVALIDATE will fail when running under an SVSM.But I don't think this series is completely at fault. This goes back to fixing memory acceptance before
sev_enable()was called and I missed the SVSM situation. So I don't think we can completely remove all SNP initialization and might have to dosvsm_setup_ca()which has a pre-req onsetup_cpuid_table()... sigh.
Why is that, though? The EFI stub never replaces the #VC and #PF handlers, and so cpuid instructions will be handled as before, right? And the SVSM setup code will run again when the core kernel boots and this time, it will need to update the cpuid tables to record the SVSM presence.
Quoted 25 lines · Ard Biesheuvel
Quoted 4 lines · Ard Biesheuvel
Quoted 2 lines · Tom Lendacky
On 4/22/25 05:07, Ard Biesheuvel wrote:
Quoted 19 lines
Quoted 6 lines
Quoted 2 lines
From: Ard Biesheuvel <[email protected]>
Hi Ard,
I'll try to get to reviewing and testing this series very soon.
Thanks.
Quoted 10 lines
But one
thing I can see is that we never set thesnp_vmpllevel anymore in the EFI stub and so PVALIDATE will fail when running under an SVSM.But I don't think this series is completely at fault. This goes back to fixing memory acceptance before
sev_enable()was called and I missed the SVSM situation. So I don't think we can completely remove all SNP initialization and might have to dosvsm_setup_ca()which has a pre-req onsetup_cpuid_table()... sigh.
Quoted 5 lines
Why is that, though? The EFI stub never replaces the #VC and #PF handlers, and so cpuid instructions will be handled as before, right? And the SVSM setup code will run again when the core kernel boots and this time, it will need to update the cpuid tables to record the SVSM presence.
It's more of a statement about the CPUID table modifications made by svsm_setup_ca() that need to be skipped if setup_cpuid_table() isn't called, not the use of CPUID itself.
But taking a closer look, snp_cpuid_get_table() is actually returning the address of cpuid_table_copy, which is a static in the file. So maybe it isn't an issue because the loop at the end of svsm_setup_ca() will not crash, which was the main concern.
I think we can use CPUID 0x8000001f_EAX[28] to detect an SVSM and read MSR 0xc001f000 to get the CAA. OVMF has that support, just would need to figure out where to check for it, then we can probably skip the svsm_setup_ca() and do everything in the snp_accept_memory() path.
Let me take a look...
Thanks,
Tom
Quoted 41 lines · Tom Lendacky
Quoted 25 lines · Ard Biesheuvel
Quoted 4 lines · Ard Biesheuvel
Quoted 2 lines · Tom Lendacky
On 4/22/25 05:07, Ard Biesheuvel wrote:
Quoted 19 lines
Quoted 6 lines
Quoted 2 lines
From: Ard Biesheuvel <[email protected]>
Hi Ard,
I'll try to get to reviewing and testing this series very soon.
Thanks.
Quoted 10 lines
But one
thing I can see is that we never set thesnp_vmpllevel anymore in the EFI stub and so PVALIDATE will fail when running under an SVSM.But I don't think this series is completely at fault. This goes back to fixing memory acceptance before
sev_enable()was called and I missed the SVSM situation. So I don't think we can completely remove all SNP initialization and might have to dosvsm_setup_ca()which has a pre-req onsetup_cpuid_table()... sigh.Quoted 5 lines
Why is that, though? The EFI stub never replaces the #VC and #PF handlers, and so cpuid instructions will be handled as before, right? And the SVSM setup code will run again when the core kernel boots and this time, it will need to update the cpuid tables to record the SVSM presence.
It's more of a statement about the CPUID table modifications made by
svsm_setup_ca()that need to be skipped ifsetup_cpuid_table()isn't called, not the use of CPUID itself.But taking a closer look,
snp_cpuid_get_table()is actually returning the address ofcpuid_table_copy, which is a static in the file. So maybe it isn't an issue because the loop at the end ofsvsm_setup_ca()will not crash, which was the main concern.
Quoted 6 lines
I think we can use CPUID 0x8000001f_EAX[28] to detect an SVSM and read MSR
0xc001f000to get the CAA. OVMF has that support, just would need to figure out where to check for it, then we can probably skip thesvsm_setup_ca()and do everything in thesnp_accept_memory()path.Let me take a look...
Initial look at something like this works (along with the fix for the mistake I made in OVMF). I need to test the kexec path to be certain, though.
arch/x86/boot/compressed/sev.c +24 -0
@@ -142,6 +142,7 @@ u64 svsm_get_caa_pa(void)int svsm_perform_call_protocol (struct svsm_call *call);u8 snp_vmpl; +bool snp_vmpl_checked;/* Include code for early handlers */ #include "../../boot/startup/sev-shared.c"
@@ -241,6 +242,29 @@ static bool early_setup_ghcb(void)void snp_accept_memory (phys_addr_t start,phys_addr_t end) { +if (!snp_vmpl_checked) { +unsigned int eax, ebx, ecx, edx; + +/* +* CPUID Fn8000_001F_EAX[28] - SVSM support +*/ + eax =0x8000001f ; + ecx =0 ; +native_cpuid (&eax, &ebx, &ecx, &edx); +if (eax &BIT (28 )) { +struct msr m; + +/* Obtain the address of the calling area to use */ +boot_rdmsr (MSR_SVSM_CAA , &m); + boot_svsm_caa = (void *)m.q; + boot_svsm_caa_pa = m.q; + + snp_vmpl =2 ; + } + + snp_vmpl_checked = true; + } +for (phys_addr_t pa = start; pa < end; pa +=PAGE_SIZE )__page_state_change (pa,SNP_PAGE_STATE_PRIVATE ); }
arch/x86/boot/startup/sev-shared.c +2 -0
@@ -1342,6 +1342,8 @@ static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info)BUILD_BUG_ON (sizeof (*secrets_page) !=PAGE_SIZE ); + snp_vmpl_checked = true; +/* * Check if running at VMPL0. *
arch/x86/coco/sev/core.c +1 -0
@@ -99,6 +99,7 @@ DEFINE_PER_CPU(struct sev_es_save_area *, sev_vmsa);*/ u8 snp_vmpl__ro_after_init ;EXPORT_SYMBOL_GPL (snp_vmpl); +bool snp_vmpl_checked__ro_after_init ;static u64 __init get_snp_jump_table_addr (void ) {
Quoted 3 lines
Thanks,
Tom
Quoted 9 lines · Tom Lendacky
Quoted 4 lines · Tom Lendacky
Quoted 1 line · Ard Biesheuvel
On Tue, 22 Apr 2025 at 18:40, Ard Biesheuvel <[email protected]> wrote:
Let me take a look...
Initial look at something like this works (along with the fix for the mistake I made in OVMF). I need to test the kexec path to be certain, though.
Ah, this version doesn't have the part in arch/x86/include/asm/sev.h that declares snp_vmpl_checked as an extern. But other than that...
Thanks,
Tom
Quoted 72 lines
arch/x86/boot/compressed/sev.c +24
-0@@ -142,6 +142,7 @@ u64 svsm_get_caa_pa(void)int svsm_perform_call_protocol (struct svsm_call *call);u8 snp_vmpl; +bool snp_vmpl_checked;/* Include code for early handlers */ #include "../../boot/startup/sev-shared.c" @@ -241,6 +242,29 @@ static bool early_setup_ghcb(void)void snp_accept_memory (phys_addr_t start,phys_addr_t end) { +if (!snp_vmpl_checked) { +unsigned int eax, ebx, ecx, edx; + +/* +* CPUID Fn8000_001F_EAX[28] - SVSM support +*/ + eax =0x8000001f ; + ecx =0 ; +native_cpuid (&eax, &ebx, &ecx, &edx); +if (eax &BIT (28 )) { +struct msr m; + +/* Obtain the address of the calling area to use */ +boot_rdmsr (MSR_SVSM_CAA , &m); + boot_svsm_caa = (void *)m.q; + boot_svsm_caa_pa = m.q; + + snp_vmpl =2 ; + } + + snp_vmpl_checked = true; + } +for (phys_addr_t pa = start; pa < end; pa +=PAGE_SIZE )__page_state_change (pa,SNP_PAGE_STATE_PRIVATE ); }arch/x86/boot/startup/sev-shared.c +2
-0@@ -1342,6 +1342,8 @@ static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info)BUILD_BUG_ON (sizeof (*secrets_page) !=PAGE_SIZE ); + snp_vmpl_checked = true; +/* * Check if running at VMPL0. * arch/x86/coco/sev/core.c +1
-0@@ -99,6 +99,7 @@ DEFINE_PER_CPU(struct sev_es_save_area *, sev_vmsa);*/ u8 snp_vmpl__ro_after_init ;EXPORT_SYMBOL_GPL (snp_vmpl); +bool snp_vmpl_checked__ro_after_init ;static u64 __init get_snp_jump_table_addr (void ) {Quoted 4 lines
Thanks,
Tom